The NOCO GBC003 Boost HD Precision Battery Clamps are heavy-duty clamps crafted for use with 12-volt gas and diesel engines. These clamps feature a needle-nose profile, allowing them to fit any shape or size battery terminal, from small terminals in tight spaces to top and side post batteries, as well as large terminal sizes. Their robust and rugged springs ensure maximum current flow with minimal power loss. Additionally, the Boost HD Precision accessory boasts no-melt and smoke-free properties, high current transferability, and reinforced all-metal construction.

Features: 

• Heavy-duty battery clamp designed for both 12-volt gas and diesel engines.
• Needle-nose clamp profile for jump starting hard-to-reach and oversized battery terminals.
• Made from durable, heat stabilized 8 AWG silicone wire that maintains its flexibility in cold weather environments.
• Engineered to efficiently transfer maximum current flow with minimal power loss.
• Compatible with the GB20, GB40, GB50, and GBX45 UltraSafe Lithium Jump Starters.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Enhance your BMW’s performance and style with this unbeatable combo! The Turner Motorsport Carbon Fiber Strut Brace and Engine Cover are the ultimate pair to upgrade chassis stability and engine bay aesthetics—all with a single purchase.

G20/G42 Carbon Fiber Strut Brace

For G20 and G42 BMW models equipped with the B48 or B58 engines, the driving thrill is undeniable. Yet, these cars lack a crucial component found in high-performance M models: structural chassis bracing. With Turner Motorsport’s 3-point Carbon Fiber Strut Brace, you’re adding the missing link to your BMW, mirroring the handling stability of an M3 or M4. This is the only strut brace that elevates G20/G42 handling by emulating the stiffness of an M-series chassis, giving you a dynamic edge on both road and track.

The strut brace fits seamlessly into your BMW using the original factory hardware and an included stud kit, offering a hassle-free, direct installation with no modifications required. Designed and tested in-house by Turner Motorsport, this brace reduces chassis flex, enhancing control during spirited driving and providing a tighter, more responsive feel. Constructed from high-strength carbon fiber with billet aluminum end brackets, this strut brace boosts performance while adding an eye-catching focal point to your engine bay.

Strut Brace Features:

Enhanced Chassis Rigidity: Reduces flex by linking the strut towers, promoting a more precise steering response. Street and Track Ready: Engineered for the best of both worlds, offering stability in all driving conditions. Premium Carbon Fiber & Billet Aluminum: Lightweight yet highly rigid, with a stunning woven 2x2 twill finish. Easy Installation: Fits perfectly with stock mounting points using supplied hardware, ensuring a hassle-free setup. Carbon Fiber: Performance & Style

Turner’s strut brace uses structural carbon fiber, designed to endure the rigors of aggressive driving without compromising aesthetics. The brace's distinct, gloss-finished carbon fiber weave adds a sophisticated, high-performance look akin to exotic supercars. Engineered for precision, this brace effectively distributes cornering forces between the strut towers, minimizing chassis distortion and maintaining optimal wheel alignment, even in hard turns.

Turner Motorsport G-Chassis Carbon Fiber Engine Cover for B58 Engines

Give your G-Chassis BMW’s engine bay a polished, refined look with Turner’s Carbon Fiber Engine Cover. This direct replacement cover is crafted from hand-laid, gloss-finished carbon fiber, delivering a resilient, UV-protected finish. With an OE-style indentation for the BMW badge, this cover complements your engine bay with a sleek, factory look that stands out.

Engine Cover Highlights:

Direct Fitment: Seamlessly replaces the stock cover, utilizing factory mounting grommets and hardware. Durable Gloss Finish: Ensures long-lasting shine and UV protection. Distinctive Style: A premium upgrade that elevates the aesthetic of your B58 engine. Installation Notes:

Simply transfer the OE grommets and badge from the stock cover to the carbon fiber engine cover for a perfect fit—installation takes seconds!

Schwaben Professional Mechanic's Work Gloves provide exceptional hand protection with a perfect balance of durability and comfort.

Designed for precision, these gloves offer high dexterity, making it easy to handle even the smallest parts. The tailored elastic cuff with a hook-and-loop closure ensures a secure and comfortable fit.

The textured latex coating on the palm and fingertips delivers superior grip and tactile feedback, while the breathable spandex backing and knit top allow for all-day comfort.

The durable synthetic leather palm enhances longevity, and the unique graphic design reflects the drifting culture of Euro car enthusiasts.

Note: See manufacturers information tab for sizing chart.

Key Features:

• High Dexterity: Perfect for picking up small parts with ease.
• Secure Fit: Tailored elastic cuff with a hook-and-loop closure.
• Enhanced Grip: Textured latex coating on palm and fingertips.
• All-Day Comfort: Breathable spandex backing and knit top.
• Durable Design: Synthetic leather palm for extended wear.
• Unique Style: Graphic design inspired by the drifting culture of Euro owners.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

• High dexterity
• Elastic hook and loop strap
• Textured latex finger tips for grip
• Breathable material

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

• High dexterity
• Elastic hook and loop strap
• Textured latex finger tips for grip
• Breathable material

Schwaben Professional Mechanic's Work Gloves provide exceptional hand protection with a perfect balance of durability and comfort.

Designed for precision, these gloves offer high dexterity, making it easy to handle even the smallest parts. The tailored elastic cuff with a hook-and-loop closure ensures a secure and comfortable fit.

The textured latex coating on the palm and fingertips delivers superior grip and tactile feedback, while the breathable spandex backing and knit top allow for all-day comfort.

The durable synthetic leather palm enhances longevity, and the unique graphic design reflects the drifting culture of Euro car enthusiasts.

Note: See manufacturers information tab for sizing chart.

Key Features:

• High Dexterity: Perfect for picking up small parts with ease.
• Secure Fit: Tailored elastic cuff with a hook-and-loop closure.
• Enhanced Grip: Textured latex coating on palm and fingertips.
• All-Day Comfort: Breathable spandex backing and knit top.
• Durable Design: Synthetic leather palm for extended wear.
• Unique Style: Graphic design inspired by the drifting culture of Euro owners.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

If your engine has higher mileage, don't neglect rod bearing replacement! These bearings are sandwiched between the connecting rod and crankshaft journal and are prone to failure due to overheating, lack of lubrication, or general wear. Replace your rod bearings and prevent a spun bearing.

Starting with ACL’s high-performance bearing shells, our Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Kit includes:

Turner Motorsport WPC-Treated Race Series Rod Bearing Shells (8) Genuine BMW Connecting Rod Bolts (8) Assembly Lube (4 oz.)

Upgrade your BMW's hose clamps with the 77-85mm - 3/4" Band Hose Clamp from Turner Motorsport. These full 304 stainless steel clamps offer convenience and quality without the dealership price tag. German-style T-bolts allow for easy adjustment to your required diameter, ensuring a secure fit every time.

• Made of durable 304 stainless steel for long-lasting performance
• German-style T-bolt design for easy size adjustment
• Convenient band widths for versatile applications
• Quality alternative to dealership pricing

Upgrade your Mini Cooper's hose clamping mechanism with the 3/8" (9mm) Band Hose Clamp from ECS. Designed for precision and durability, this clamp ensures a secure fit for hoses, preventing leaks and ensuring optimal performance. Crafted to meet high-quality standards, it provides reliable sealing and resilience against varying temperatures and pressures. Easy to install and engineered for long-term use, this hose clamp is an essential addition to maintain your Mini Cooper's functionality.

• Precision-engineered for Mini Cooper hoses
• Ensures a secure and leak-free fit
• Resilient against temperature and pressure variations
• Easy to install and durable for long-term use

1.5mm X 51mm Metric Buna-N 70 O-ring is the perfect sealing solution for various industrial applications. Made from high-quality Buna-N material, this O-ring provides reliable sealing performance, ensuring leak-free connections. With its metric sizing and 70 durometer hardness, it offers versatility and durability for a wide range of uses.

• High-quality Buna-N material
• Reliable sealing performance
• Metric sizing for versatility
• 70 durometer hardness for durability

The Schwaben Extended Reach Spark Plug Socket is the perfect tool for removing 5/8-inch spark plugs with deeply recessed plugs.

The five inch long, rigid socket body provides solid engagement with the plug hex to prevent plug breakage.

Features:

• Magnetic ring holds the spark plug but won't stick to the plug porcelain neck like sockets with cheap rubber inserts
• Chrome plated with durable and attractive polished surface
• Turn it with a 3/8-inch ratchet or a 19 mm (¾-inch) socket or box wrench at the external hex head
• Outer diameter of socket is approximately 22mm

COMBINATION WRENCH SET:

Quality combination wrenches are a must when doing any kind of automotive work.

Features:

• A complete set from 8 to 19 mm 
• Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
• Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
• Includes sturdy wrench holder for easy storage

SCRAPER, HOOK, AND PICK SET:

Some of the most popular uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips. This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

• 3" Blade MINI Awl, 90°, Hook, and Curve
• 6" Blade Awl, 90°, Hook, and Curve
• 6" x 1" wide scraper

Everything in this kit comes with LIFETIME REPLACEMENT.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Upgrade your BMW with ECS Tuning's Stainless Steel Hose Clamps, designed for convenience and durability. With various band widths and German-style T-bolts, these clamps offer easy adjustment to your required diameter. Say goodbye to dealer pricing and enjoy the quality you love at ECS Tuning.

• Full stainless steel construction
• Various band widths available
• German-style T-bolts for easy adjustment
• Convenient solution for hose clamp replacement

Discover ECS Tuning's stainless steel hose clamps, designed to simplify your Mini's maintenance tasks. No more waiting for dealership orders or overpaying!

These clamps offer versatility with various band widths and German-style T-bolts for size adjustment, ensuring they meet your required diameter. Say goodbye to dealer pricing while securing top-notch quality synonymous with ECS Tuning.

• Stainless steel construction for durability
• Versatile band widths for various applications
• German-style T-bolts for size adjustment
• High-quality alternative to dealership hose clamps