Turner Motorsport for BMW 3 Series G20 (2019+)

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)

Introducing our Turner Performance Cat-Back Exhaust for your G20 M340! Precision-crafted exhaust that elevates your driving experience with a new level of excitement. Designed with our commitment to performance and quality, this exhaust is meticulously engineered to unleash the true potential of your M340. In tandem with performance and sound, our cat-back exhaust enhances the visual aesthetic with upgraded quad exit exhaust tips that complement the overall motorsport nature of the M340 and replace the fake factory exhaust tips. Upgrade your driving experience with our cat-back exhaust for your M340! Unleash the power, bask in the glorious sound, and turn heads wherever you go.

Using our signature design principles this exhaust is crafted to deliver a deep, authoritative tone that reveals the true rowdy attitude of the M340. Designed to utilize the factory valve control our cat-back provides an exhilarating sound during acceleration without compromising the daily driving amenities. Our exhaust is manufactured of 1.25mm wall T304 stainless steel for superior durability, corrosion resistance, and aesthetics. Designed with the customer in mind it features a straightforward bolt-on installation utilizing factory slip joints and mounting locations and includes are clamps and hardware necessary for installation.

Upgrading the sound:

Our exhaust allows you to turn up the volume and let the B58TU boast its smooth and hearty exhaust tone. Let's be honest, what's the point of owning a B58 if you're not going to upgrade the exhaust? Our signature muffler design allows you to transfer the exhaust valve from your factory system directly onto your new Turner system. The Turner exhaust signature muffler design allows for two flow paths that change both tone and volume. With the vehicle in eco or comfort mode, the valves remain closed, with the closed valves the exhaust system allows the gasses to flow through the muffler toning down the volume and giving a more refined exhaust note. While in driving modes sport or sport+ the valve opens and the flow path changes to a "straight flow path" essentially turning into a straight-piped exhaust for the least amount of restriction and the most amount of B58 sound!

Upgraded aesthetics:

From the factory, the G chassis comes equipped with fake or imitation exhaust tips, our Turner exhaust allows you to remove the imitation tips from the vehicle and sport a set of 4 true exhaust tips giving that upgraded motorsport styling.

How the cat-back is designed:

To create a cat-back exhaust for this incredible vehicle the upgrade happens right at the downpipe. We replaced the factory components with our full 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep the flow to a maximum! With smooth mandrel bent transitions our exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is our signature B58 muffler with beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Quad 3.5" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Features and Benefits:

Street/Motorsport inspiration
Controlled by factory valves
Compatible with factory and aftermarket downpipes (80mm)
Quad exit with true exhaust tips to replace factory facia
19 lb weight savings (Factory - 65lbs, Turner 46lbs)
Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
Full 3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Kit Contents:

3.0" front exhaust section (80mm flange to connect to factory and aftermarket downpipes)
Full 3.0" lightweight free-flowing midsection for better sound, performance, and weight savings.
Valved Rear muffler
Valve extension harness
Clamps and Hardware for an OEM+ install
Optional 3.5" Exhaust Tips
Product Development:

Our G Chassis B58 Valved Catback was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Dual Tip Wall Slash Cut Exhaust - 3.0 Inlet - 3.5 OD - Stepped Left - Mirror is the perfect upgrade for those looking to enhance their vehicle's aesthetics and performance. Crafted with a stunning mirror finish, this exhaust tip features a sleek slash cut and stepped left design that adds a touch of sophistication to your vehicle. Its double-wall construction ensures durability and a premium look, making it a must-have for any car enthusiast.

• Enhanced Appearance: Mirror finish provides a polished, high-end look.
• Durable Construction: Double-wall design for long-lasting performance.
• Precision Fit: 3.0-inch inlet and 3.5-inch outer diameter for a perfect fit.
• Stylish Design: Slash cut and stepped left design for a unique, aggressive appearance.
• Easy Installation: Designed for straightforward installation on compatible vehicles.

Set of 4 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Set of 2 universal 2.5" inlet to 4.0" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

High performance ignition kit for your B46/48TU featuring spark plugs, Turner high performance ignition coils and dielectric grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils

High performance ignition kit for your B58TU featuring spark plugs, Turner high performance ignition coils and dielectric grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils

Set of 4 universal 2.5" inlet to 4.0" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Turner Motorsport Polo shirts are perfect to show your passion for the race team when you're not in the garage. Pick one up today!

Don't see your size available? Give us a call at 1.800.280.6966 - we have you covered.

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Our B Series ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Ignition coils are responsible for 1/3 the operation your engine and it would be smart to weigh the options when shopping. Turner B Series ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
Direct fitment
Signature Turner Blue finish

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Black Chrome Finish
Double Wall Construction
Slant Cut Style
Includes Stainless Steel Clamp

Upgrade your engine build with Turner's WPC-treated Race Series Bearings, engineered for serious performance enthusiasts. Starting with ACL’s high-performance bearing shells, these Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Key Features:

Duraglide Tri-Metal Construction: ACL's Race Series bearings feature a high-strength overlay for enhanced performance. Optimized Oiling: Designed to promote better oil flow during high-RPM conditions. Precise Fitment: Manufactured with OEM-level precision using micron tolerance machining. WPC-Treated for Strength: Surface treatment adds strength and reduces friction for improved engine performance. No Flash Plating: Allows for better heat transfer and bearing retention. Thermal Discharge Process: Smoother, stronger components through WPC’s unique thermal discharge technology. Enhanced Heat and Friction Resistance: Built to combat the biggest enemies of high-performance engines. Don’t settle for standard bearings—choose Turner Motorsport WPC-treated Race Series Bearings for the ultimate engine performance upgrade. Perfect for your next engine rebuild or rod bearing service!