Dinan for BMW 3 Series G20 (2019+)

Dinan B-Series Performance Ignition Coil - Red - BMW B36 B38 B46 B48 ...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4908035

Part#: D650-0009

In Stock

11% off MSRP $ 43.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.90 USD

Add to Wish List

Qty

11% off MSRP

$ 43.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.90 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Dinan B-Series Performance Ignition Coil - Black - BMW B36 B38 B46 B4...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4908034

Part#: D650-0008

In Stock

$ 35.82 USD

Add to Wish List

Qty

$ 35.82 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Dinan B-Series Performance Ignition Coil - Blue - BMW B36 B38 B46 B48...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4908036

Part#: D650-0010

In Stock

11% off MSRP $ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

11% off MSRP

$ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

40mm Lug Bolt Kit - Set Of 10

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:23185027

Part#: D220-0005

In Stock

$ 38.99 USD

Add to Wish List

Qty

$ 38.99 USD

Add to Wish List

40mm Lug Bolt Kit - Set Of 10 is designed to provide a secure and reliable fit for wheels equipped with spacers. These longer lug bolts are essential for accommodating 10mm and 12mm spacers, ensuring proper wheel alignment and safety. Constructed from durable steel with a black zinc coating, these bolts feature an OEM-style cone seat for a precise fit. It’s important to verify the correct thread size for your specific application using the general application guide provided on the product page.

Durable Steel Construction: Ensures long-lasting performance and strength.
OEM-Style Cone Seat: Provides a precise fit for optimal wheel alignment.
40mm Length: Ideal for use with 10mm and 12mm spacers.
Black Zinc Coating: Offers enhanced corrosion resistance and a sleek appearance.
Set of 10: Provides enough bolts for a complete wheel installation.

Show More Show Less

Supplementary Ride Quality & Handling Kit - G2X G42 F9X G0X ...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389396

Part#: D193-0121

In Stock

12% off MSRP $ 172.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 152.99 USD

Add to Wish List

Qty

12% off MSRP

$ 172.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 152.99 USD

Add to Wish List

Enhance your BMW's handling and ride quality with the Dinan Performance Springs Kit. Paired with Dinan performance springs, this kit takes your driving experience to the next level. The progressive-rate bump stops included in the kit optimize spring rate, providing additional mechanical grip and preventing bottoming out and binding. Enjoy improved suspension travel and a simplified installation process with all hardware included.

Improved handling
Preserved ride quality
Optimized spring rate for mechanical grip
Maximized suspension travel
Prevention of bottoming out and binding
Simplified installation with included hardware
Earns 1 point towards your Dinan badge

For over 35 years, Dinan has been at the forefront of BMW tuning, blending advancements in modification with a commitment to balanced performance. Installing a Dinan part means not only benefiting from carefully developed and tested components but also enjoying a four-year, 50,000-mile warranty. Embrace the "total package" approach, and once your car is fitted with enough Dinan parts, proudly display the exclusive trunk badge – a symbol of your conversion from stock to Dinan, celebrated by BMW enthusiasts everywhere.

Show More Show Less

Dinan Performance Spring Set - G20 330i M340i, G22 M440i xDrive ...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598360

Part#: D100-0934

In Stock

11% off MSRP $ 380.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 337.99 USD

Add to Wish List

Qty

11% off MSRP

$ 380.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 337.99 USD

Add to Wish List

Improve your handling and ride with the Performance Spring Set from Dinan. This spring set was designed on the road, with track use in mind. It offers the best of both worlds, tight, rigid handling on corners while still smooth and comfortable on the highway and over bumps. You will experience substantially less body roll, as well as less dive under hard braking with these stiffer springs.

Show More Show Less

Dinan Banner Flag - 5' x 3'

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:16175677

Part#: D080-0052

In Stock

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Show off your Dinan pride with this highly desirable and great looking Dinan fabric banner/flag that is perfect for the garage, shop, man cave or any BMW enthusiasts' workspace. Featuring the classic Dinan logo on movable fabric material that has reinforced hems and grommets for maximum durability and flex. The Dinan banner, like the signature products it represents, is sure to last and look good doing it.

Show More Show Less

Dinan B58 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G42, To...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:8076779

Part#: D760-0062

In Stock

$ 183.99

This product was last offered at the strikethrough price on
02-11-2026

$ 183.95 USD

Add to Wish List

Qty

$ 183.95 USD

Add to Wish List

Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 14% increase in overall volume over OEM inlet. Average of 7.7% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

Dinan High Flow Drop-In Replacement Filter - BMW G2X G42 B46 B48 B58 ...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:32516358

Part#: D401-0046

In Stock

12% off MSRP $ 69.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 61.45 USD

Add to Wish List

Qty

12% off MSRP

$ 69.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 61.45 USD

Add to Wish List

Dinan High Flow Drop-in Replacement Filters are a direct upgrade to your factory intake system and will instantly provide better flow to assist your engine in achieving maximum performance and efficiency! While factory paper filters function admirably, they can be restrictive to performance goals given the material used. They also require being replaced numerous times during the lifespan of the vehicle which can add up to a substantial amount in maintenance costs. Limited performance and increased maintenance costs are never ideal but can be resolved effectively and economically in the case of filters. Dinan High Flow Drop-in Replacement Filters are constructed of 4 layers of cotton gauze that allow better flow and less pressure drop than the stock media. This equates to the engine not needing to work as hard to make the same or more power. Additionally, the use of oiled cotton media means that the Dinan filters are washable/reusable while still retaining excellent filtration and ensuring your engine runs clean for the duration. When upgrading to a complete Dinan intake system for best performance, is not available, possible, or within the budget, Dinan High Flow Drop-in Replacement Filters have you covered! Features & Benefits: Less restrictive and better flowing than stock allowing maximum engine performance and efficiency Direct replacement for stock air filter 4 layers of proprietary high flow oiled cotton gauze material for exceptional filtration Washable and reusable for the life of the engine Quick and easy installation

Show More Show Less

Dinan Billet Front Strut Tower Brace Bars - BMW G20 3-Series ...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5567104

Part#: D180-0014

In Stock

11% off MSRP $ 380.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 337.99 USD

Add to Wish List

Qty

11% off MSRP

$ 380.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 337.99 USD

Add to Wish List

The Dinan G2x Strut Tower Braces provide additional rigidity and sharper handling to the chassis by reducing flex under hard cornering conditions. With more control, spirited driving becomes easier and infinitely more enjoyable. Not only do the braces provide a performance benefit but they replace arguably the biggest eyesore in the factory engine compartment. Transforming the blight that is the factory smashed aluminum tubes into a notable highlight that augments the engine bay rather than detract from it. The attractive black anodized billet aluminum braces can be installed in a matter of minutes and used in conjunction with either the stock or Dinan intake systems with the brace valley (D760-0058 / D760-0059). Features: Improved chassis rigidity. Decreased flex during cornering. Solid black anodized billet aluminum for maximum strength and visual appeal. Compatible with stock and Dinan Intake Systems with brace valley (D760-0058 / D760-0059) Bolt-on installation.

Show More Show Less

Dinan PEX Cold Air Intake - G2X B58

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21933040

Part#: D760-0069

In Stock

11% off MSRP $ 518.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 460.99 USD

Add to Wish List

Qty

11% off MSRP

$ 518.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 460.99 USD

Add to Wish List

Looking for more, for less? The all new G2x/G4x Mx40i PEX Intake delivers all the performance and sound benefits as its carbon fiber sibling -- just with less showmanship -- resulting in the best dollar-per-horsepower B58 intake system available from Dinan. The Mx40i's are an impressive lot in terms of performance and style but that is not conveyed when viewing its lackluster stock intake system swaddled by seemingly unfinished strut braces (where applicable). In stock trim, the Mx40i comes with a dry and lifeless air box housing a basic panel filter that is also accompanied by an intake resonator whose job it is to eliminate turbo/intake noises. The same noises that those in the performance world relish. Essentially BMW has seen fit to give Mx40i owners an air box that looks uninspiring, flows adequately but not ideally, and emits no noise. The exact opposite of what the platform exudes otherwise. The Dinan PEX intake for the platform corrects these wrongs and delivers a semi-open intake capable of flowing 58% more air than the stock system resulting in additional top end power and improved throttle response. At the same time revealing an enhanced OEM-like appearance that blends seamlessly with surrounding factory plastic under hood components, and an increase in sound courtesy of the removal of the intake resonator and implementation of a semi-open design. To achieve the gains in flow that set the Dinan intake system apart, the entire lower box of the system, and not just the lid, has been reworked and enlarged to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan in order to effectively fill the volume of the enlarged air box and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box located on the opposite side from the engine provided a perfect balance of additional volume to assist the factory inlet all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). With more air being pulled into the system, throttle response is improved and additional power is realized in the form of max gains of +9 WHP / +8 ft-lbs of torque. The secondary air inlets also allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. While power and sound are the stars, the modest PEX construction fuses effortlessly into the factory engine bay for a reserved visual that despite basic materials still manages to draw attention. It's an economical solution to form and function for a vehicle that permeates both. Features: More Power: Max gains of 9 WHP and 8 lb-ft of torque on a completely stock vehicle High heat deflection PEX construction and an OEM look Enjoyably louder, sportier sound Improved throttle response Outflows factory intake by 58% or more Larger volume air box (60% larger than stock) 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow Compatible with all G2x Mx40i's with and without factory bracing Quick and easy installation NOTE: This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA.

Show More Show Less

Dinan Carbon Fiber Cold Air Intake Kit - G20/22/23/26 3 & 4 Serie...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5567101

Part#: D760-0058

Ships on Jul 6, 2026

$ 562.99 USD

Add to Wish List

Qty

$ 562.99 USD

Add to Wish List

The M440i/M340i is an impressive car in terms of performance and style but that is not conveyed when viewing its lackluster stock intake system swaddled by seemingly unfinished strut braces. In stock trim, the M440i/M340i comes with a dry and lifeless airbox housing a basic panel filter that is also accompanied by an intake resonator whose job it is to eliminate turbo/intake noises. The same noises that those in the performance world relish. Essentially BMW has seen fit to give M440i/M340i owners an airbox that looks uninspiring, flows adequately but not ideally, and emits no noise. The exact opposite of what the platform exudes otherwise. The Dinan carbon fiber intake for the platform rights these wrongs and delivers a semi-open intake capable of flowing 58% more air than the stock system resulting in additional top-end power and increased throttle response. At the same time revealing a more aggressive, sporty carbon fiber appearance, and an increase in sound courtesy of the removal of the intake resonator and implementation of a semi-open design. In order to achieve the gains in flow that set the Dinan intake system apart, the entire lower box of the system, and not just the lid, has been reworked and enlarged in an effort to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free-flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan in order to effectively fill the volume of the enlarged airbox and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box located on the opposite side from the engine provided a perfect balance of additional volume to assist the factory inlet all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). With more air being pulled into the system, throttle response is improved and additional power is realized in the form of max gains of +9 WHP / +8 ft-lbs of torque. The secondary air inlets also allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased power and sound, the outwardly visible system is made of immaculate carbon fiber so the under the hood appeal is vastly improved over its drab and utilitarian beginnings. A worthy piece to add to an already impressive vehicle. Features: More Power: Max gains of 9 WHP and 8 lb-ft of torque @ 6500 RPM on a completely stock vehicle. Enjoyably louder, sportier sound. Improved throttle response Outflows factory intake by 58% or more. Larger volume airbox (60% larger than stock). 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow. Compatible with all G2X MX40i's with and without factory bracing. Quick and easy installation

Show More Show Less

B-Series Performance Ignition Coil - Red Set Of Six

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27572113

Part#: D650-0009KT2

In Stock

$ 233.99 USD

Add to Wish List

Qty

$ 233.99 USD

Add to Wish List

Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!

Show More Show Less

Dinan High Performance Intercooler Heat Exchanger - G2X G42 A90 B48 B...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25805796

Part#: D780-0003

In Stock

11% off MSRP $ 483.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 429.99 USD

Add to Wish List

Qty

11% off MSRP

$ 483.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 429.99 USD

Add to Wish List

The OE thermal management system for the B4x/B58 G-chassis BMW and Toyota GR Supra offers an improved formula from prior generations. With a setup where engine coolant is also re-routed through the heat exchanger, the system effectively assists in overall engine cooling as well as charge cooling. However, like its predecessors, it has room for improvement as it can be overwhelmed when the system is taxed aggressively or as power levels are increased. Once overburdened, this results in the undesirable outcome of power being diminished. Avoidance of this unwelcome scenario can be attained though with a Dinan heat exchanger that improves the overall thermal management system so everything runs cooler and more efficiently while being budget-friendly. The Dinan B4x/B58 heat exchanger for the BMW G2x/G4x and Toyota A9x Supra assists in improving overall charge cooling using a more robust core (45mm thick Dinan core vs. 26.75mm thick OEM core) that wields 68% more heat transfer surface area for improved cooling capacity. The significant increase in core thickness and full-size end tanks contribute to the overall thermal mass (ability to absorb, store, and release heat) improvement beyond the OEM setup. With up to a nearly 12º reduction in charge air temps recorded over stock, the Dinan heat exchanger is ready, and able, to assist in extending your vehicle's ability to deliver maximum performance time and time again for your driving enjoyment! Features: Average of 8.7º C reduction in charge air temps with a maximum reduction of nearly 12º C over 30 successive WOT pulls General improvement to the efficiency of the thermal management system, inclusive of engine cooling 45mm thick Dinan core vs. 26.75mm thick stock cooler core 68% more cooling surface area and volume than stock Reduces the tendency to heat soak / go in to limp mode Durable bar and plate design that is less susceptible to damage from road debris Pressure tested, 100% TIG welded, Aluminum construction Direct fit replacement with no modifications required Installation Instructions: https://documents.dinancars.com/d780-0003.pdf NOTE: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

Dinan Fender Gripper Mat

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27205340

Part#: FG2402

In Stock

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

Dinan Tension Strut Ball Joint Kit - Front - G20 G22/23/26 G29 A90/91...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598376

Part#: D280-0022

In Stock

11% off MSRP $ 461.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 409.99 USD

Add to Wish List

Qty

11% off MSRP

$ 461.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 409.99 USD

Add to Wish List

An underrated component of a proper driver's suspension the monoball kit (tension strut ball joint kit in today's terminology), is a remnant of an era when road feel was something desirable and sought after. Drivers wanted the visceral feel of being connected to the road as the road-racing heritage of BMW M demanded. Dinan embraced this and over the years mastered its craft into a kit that not only satisfied the desire for proper road feel but also made it livable for everyday driving. While stock suspension properties may have swayed from its golden era lineage to more mainstream ideals, Dinan is here to correct those mistakes for those that want a more M-passioned BMW experience. The Dinan Tension Strut Ball Joint Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. The quietest bearings on the market are virtually noise-free so you can live with them every day. These are the only bearings on the market that are sealed using a rubber boot to keep out dirt and road grime stopping them from wearing out prematurely. Features: Improved steering responsiveness. Reduces brake shimmy. Nylon-lined bearings for quiet operation. Machined aluminum housings. Sealed bearings.

Show More Show Less

Dinan PEX Cold Air Intake - G2X B46

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21933039

Part#: D760-0070

In Stock

$ 439.95 USD

Add to Wish List

Qty

$ 439.95 USD

Add to Wish List

Looking for more, for less? The all new G2x/G4x x30i PEX Intake delivers all the performance and sound benefits as its carbon fiber sibling -- just with less showmanship -- resulting in the best dollar-per-horsepower B46/B48 intake system available from Dinan. In the quest to be all things to all people at an attractive price point the x30i's have been reduced to a mundane, albeit pragmatic, core with elements devoid of any character both outwardly and inwardly. For example, in stock trim, the 230i/330i/430i comes with a utilitarian and lifeless air box swaddled by seemingly unfinished braces (where applicable) and housing a basic panel filter that is also accompanied by an intake resonator whose job it is to eliminate turbo/intake noises. The same noises that those in the performance world relish. Essentially, BMW has seen fit to give x30i owners an air box that looks uninspiring, flows adequately but not ideally, and emits no noise. The Dinan PEX intake for the platform rights these wrongs and delivers a semi-open intake capable of flowing 58% more air than the stock system resulting in improved throttle response and the elimination of a potential roadblock when opting to pursue a high-powered build (upgraded turbo, fueling, etc.). At the same time revealing an enhanced OEM-like appearance that blends seamlessly with surrounding factory plastic under hood components, and an increase in sound courtesy of the removal of the intake resonator and implementation of a semi-open design. To accomplish the feat in flow that sets the Dinan intake system apart the entire lower box of the system, and not just the lid, has been reworked and enlarged to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan in order to effectively fill the volume of the enlarged air box and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box on the opposite side from the engine provided a perfect balance of additional volume to assist the factory snorkel all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). While the additional flow does not translate to any noteworthy rise in power output for stock or basic bolt-on equipped vehicles, the Dinan intake system does expand the potential of the platforms power ceiling. Put simply, those striving to build a more potent and robust solution, complete with turbo and fueling upgrades, will be allowed to maximize the results without worry of the intake system being a limiting factor. Regardless of the level of build, the secondary air inlets allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. While increased flow and sound are the stars, the modest PEX construction fuses effortlessly into the factory engine bay for a reserved visual that despite basic materials still manages to draw attention. It's an economical solution to form and function for a vehicle that permeates both. Features: Outflows factory intake by 58% or more Enjoyably louder, sportier sound High heat deflection PEX construction and an OEM look Improved throttle response Larger volume air box (60% larger than stock) 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow Compatible with all G2x/G4x x30i's with and without factory bracing Quick and easy installation NOTE: This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA

Show More Show Less

Throttle Booster

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:11693563

Part#: D440-1700

In Stock

11% off MSRP $ 310.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 275.99 USD

Add to Wish List

Qty

11% off MSRP

$ 310.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 275.99 USD

Add to Wish List

Dinan Automatic & DCT Transmission Alumnium Pedal Cover Set ...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389437

Part#: D700-0001

In Stock

$ 224.99 USD

Add to Wish List

Qty

$ 224.99 USD

Add to Wish List

Stylish aluminum and rubber pedal pads add a great high performance look to the interior of your BMW, while providing plenty of grip for even slippery leather soles. The pedal pads feature the Dinan logo and come complete with hardware for a simple installation. Worth 1 point towards your Dinan badge.

For cars with automatic transmission.

Show More Show Less

Dinan Slimline License Plate Frame - Brushed Finish

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:23185033

Part#: D010-0017

In Stock

$ 41.99

This product was last offered at the strikethrough price on
12-29-2025

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

High-quality stainless steel slimline license plate frame with Dinan logo.

Dinan Double-Walled 4" Clamp-On Exhaust Tip - Black Ceramic - 2....

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38688899

Part#: D663-0601-BOX

Ships on Jul 1, 2026

$ 92.99 USD

Add to Wish List

Qty

$ 92.99 USD

Add to Wish List

Looking to replace old, or damaged, Dinan clamp-on tips or want to customize your exhaust setup with some Dinan flair? Look no further than our polished or black ceramic coated, straight-cut, double-walled exhaust tips that are available in a variety of tip sizes, lengths and inlet diameters! The enlarged tips with classic styling features an engraved Dinan logo on each tip. A combination that will demand attention to any passerby.

Show More Show Less

Dinan Carbon Fiber Cold Air Intake Kit - G20/22/23/26 3 & 4 Serie...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5567102

Part#: D760-0059

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

In the quest to be all things to all people at an attractive price point the 430i/330i has been reduced to a mundane, albeit pragmatic, core with elements devoid of any character both outwardly and inwardly. For example, in stock trim, the 430i/330i comes with a utilitarian and lifeless air box swaddled by seemingly unfinished braces and housing a basic panel filter that is also accompanied by an intake resonator whose job it is to eliminate turbo/intake noises. The same noises that those in the performance world relish. Essentially, BMW has seen fit to give 430i/330i owners an air box that looks uninspiring, flows adequately but not ideally, and emits no noise. The Dinan carbon fiber intake for the platform rights these wrongs and delivers a semi-open intake capable of flowing 58% more air than the stock system resulting in improved throttle response and the elimination of a potential roadblock when opting to pursue a high-powered build (upgraded turbo, fueling, etc). At the same time the Dinan kit unveils a more aggressive, sporty carbon fiber appearance, and an increase in sound courtesy of the removal of the intake resonator and implementation of the semi-open design. In order to accomplish the feat in flow that sets the Dinan intake system apart the entire lower box of the system, and not just the lid, has been reworked and enlarged in an effort to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan in order to effectively fill the volume of the enlarged air box and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box on the opposite side from the engine provided a perfect balance of additional volume to assist the factory snorkel all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). While the additional flow does not translate to any noteworthy rise in power output for stock or basic bolt-on equipped vehicles, the Dinan intake system does expand the potential of the platforms power ceiling. Put simply, those striving to build a more potent and robust solution, complete with turbo and fueling upgrades, will be allowed to maximize the results without worry about the intake system being a limiting factor. Regardless of the level of build, the secondary air inlets allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased flow and sound, the outwardly visible system is made of immaculate carbon fiber so under-hood appeal is vastly improved over its drab and utilitarian beginnings. In and of itself, making it worth the price of admission. Features: Outflows factory intake by 58% or more. Enjoyably louder, sportier sound. Beautifully crafted carbon fiber construction (lid and tube). Improved throttle response. Larger volume airbox (60% larger than stock). 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow. Compatible with all G2X X30i's with and without factory bracing. Quick and easy installation.

Show More Show Less

Dinan Replacement Filter For High Flow Carbon Fiber Intake

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:797054

Part#: D401-0027

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Replacement air filter for Dinan High Flow Carbon Fiber Intake (D760-0052, D760-0055, D760-0058, D760-0059, D760-0065 & D760-0066).

Features:

Deep pleats in multi-layered cotton for increased flow and superior filtration.

Steel wire mesh providing strength and dent resistance.

Custom molded ends allowing for optimum filter surface area within the Dinan air box.

Show More Show Less

Dinan License Plate Frame - Black

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:556683

Part#: D010-0013

In Stock

$ 45.99

This product was last offered at the strikethrough price on
12-29-2025

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

This license plate frame is a great way to show off your Dinan pride, and lets the other cars on the road know what you've got under the hood.

Dinan Carbon Fiber Cold Air Intake Kit - BMW G20 M340i/i xDrive ...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:640625

Part#: D760-0052

In Stock

$ 562.99 USD

Add to Wish List

Qty

$ 562.99 USD

Add to Wish List

The M340i is an impressive car in terms of performance and style but that is not conveyed when viewing its lackluster stock intake system. In stock trim, the M340i comes with a dry and lifeless airbox housing a basic panel filter that is also accompanied by an intake resonator whose job is to eliminate turbo/intake noises. The same noises that those in the performance world relish. Essentially BMW has seen fit to give M340i owners an airbox that looks uninspiring, flows adequately but not ideally, and emits no noise. The exact opposite of what the platform exudes otherwise. The Dinan carbon fiber intake for the platform rights these wrongs and delivers a semi-open intake capable of flowing 58% more air than the stock system resulting in additional top-end power and increased throttle response. At the same time revealing a more aggressive, sporty carbon fiber appearance, and an increase in sound courtesy of the removal of the intake resonator and implementation of a semi-open design. In order to achieve the gains in flow that set the Dinan intake system apart, the entire lower box of the system, and not just the lid, has been reworked and enlarged in an effort to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free-flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan in order to effectively fill the volume of the enlarged airbox and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box located on the opposite side from the engine provided a perfect balance of additional volume to assist the factory inlet all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). With more air being pulled into the system, throttle response is improved and additional power is realized in the form of max gains of +9 WHP / +8 ft-lbs of torque. The secondary air inlets also allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased power and sound, the outwardly visible system is made of immaculate carbon fiber so the under the hood appeal is vastly improved over its drab and utilitarian beginnings. A worthy piece to add to an already impressive vehicle. Features: More Power: Max gains of 9 WHP and 8 lb-ft of torque @ 6500 RPM on a completely stock vehicle. Enjoyably louder, sportier sound. Improved throttle response Outflows factory intake by 58% or more. Larger volume airbox (60% larger than stock). 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow. Quick and easy installation

Show More Show Less

DINANTRONICS Sport Performance Tuner - BMW B46/B48 2.0L, B58 3.0L ...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:391200

Part#: D440-0047

Ships in 6 Business Days

11% off MSRP $ 310.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 275.99 USD

Add to Wish List

Qty

11% off MSRP

$ 310.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 275.99 USD

Add to Wish List

This boost controller was designed from the beginning to be easily installed and even easier to use. It plugs into a sensor and uses the factory DME to re-map boost, timing, and fuel maps. Changes can be made via Bluetooth, allowing you to use your smartphone to turn boost up for max performance or down for conservative driving. The app contains a live boost monitor that streams data in real time.

Up to 40HP/50lb/ft gain
Easy installation
Adjust boost via free Bluetooth app
Live, real-time streaming boost data on your smartphone
Worth 1 point toward your Dinan badge

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install this Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a one year warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

Note: Dinan's one year warranty on DINANTRONICS Sport modules covers the product itself, and not damage related to misuse or associated labor costs.

Show More Show Less

Dinan Slimline License Plate Frame - Black

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:556685

Part#: D010-0018

Ships in 6 Business Days

13% off MSRP $ 46.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

Qty

13% off MSRP

$ 46.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

This license plate frame is a great way to show off your Dinan pride, and lets the other cars on the road know what you've got under the hood.

Dinan Exhaust Valve Remote - Most BMWs 2012+

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:600153

Part#: R660-0001

In Stock

$ 306.99 USD

Add to Wish List

Qty

$ 306.99 USD

Add to Wish List

The Dinan Exhaust Valve Remote lets you override the factory exhaust valve operation and fully open (or close) the valve at the press of a button. Directly compatible with 'F' and 'G' chassis BMW's using a single electronic valve as well as 3rd generation MINI's, the Dinan Exhaust Valve Remote Kit is robust in its potential applications. Once installed simply press the top button of the supplied wireless remote to open the valve fully and enjoy maximum aural pleasure. Alternatively, when the need arises for the exhaust to be as quiet as possible, press the bottom button on the remote and the valve will close. This system works with both the factory exhaust and any aftermarket system that utilizes the factory electronic exhaust valve actuator. Tested and compatible valve actuators include BMW P/N's 18307851568, 18308686640, 18308632154, and 18308623424. Features: Opens the factory electronic exhaust valve with the push of a button. Wirelessly remote controlled. Weatherproof housing. Extra length wiring harnesses for maximum application and routing versatility.

Show More Show Less

Dinan Double-Walled 4" Clamp-On Exhaust Tip - Polished - 2.75&qu...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38688898

Part#: D663-0600-BOX

In Stock

$ 81.99 USD

Add to Wish List

Qty

$ 81.99 USD

Add to Wish List

Looking to replace old, or damaged, Dinan clamp-on tips or want to customize your exhaust setup with some Dinan flair? Look no further than our polished or black ceramic coated, straight-cut, double-walled exhaust tips that are available in a variety of tip sizes, lengths and inlet diameters! The enlarged tips with classic styling features an engraved Dinan logo on each tip. A combination that will demand attention to any passerby.

Show More Show Less

Dinan Front & Rear Sway Bar Set - BMW G2X G42 RWD

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37959656

Part#: D120-0630

Ships in 5 Business Days

$ 769.99

This product was last offered at the strikethrough price on
12-29-2025

$ 600.99 USD

Add to Wish List

Qty

$ 600.99 USD

Add to Wish List

Anti-roll bars help reduce body roll in all driving situations, but factory versions are often too soft for comfort rather than performance. Dinan tuned anti-roll bars, however, are engineered specifically for each BMW chassis to enhance responsiveness and handling. By minimizing body roll while maintaining optimal mechanical grip, they keep the car more level, providing a planted and confident feel through corners—an essential upgrade for back road and track enthusiasts.

Show More Show Less

Dinan DINANTRONICS X Performance Tuner - G20 M340, G01/02 X3 X4 M40i,...

Fits 2021+ model years

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6715740

Part#: D440-0153

Back Ordered

11% off MSRP $ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 665.99 USD

Add to Wish List

Qty

11% off MSRP

$ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 665.99 USD

Add to Wish List

The DINANTRONICS X is the newest installment of the highly successful Dinan foray into inline tuning modules. Like its predecessors, it is a highly engineered piece of computer hardware and software that enhances engine performance to levels the stock programming is not allowed to venture. It does this without affecting long-term reliability or the functionality of onboard diagnostic systems when run under recommended operating variables. Unlike its predecessor, however, the DINANTRONICS X is Bluetooth smart and offers convenient access to the adjustment of power levels directly from the palm of your hand. A further advancement beyond its entry-level little brother, the DINANTRONICS SPORT, X connects to additional inputs and/or has a more refined tuning strategy that yields more power as a result. For those that do not wish to (or can't) alter their stock ECU with a more robust engine flash the DINANTRONICS X is a perfect alternative to satiate the craving for "more". Whichever level of engine tuning is ultimately chosen you can be sure to be pleased by the result. The Dinan Difference is possible by employing a full staff of talented engineers that are well rounded in many facets of automotive engineering and backed by a wealth of hands-on knowledge. Stemming from diverse backgrounds not only on racing teams but on standard factory production line vehicles, we have seen it all. Manipulating these signals/maps with an adept hand, all the while keeping an engine running at its best and with the most reliable power, is what Dinan is all about. NOTE: D440-0153 does not apply to the 2020 M340i. Please use D440-0152 (ES4499647) for that specific application. Features: More Power: Max gains of up to +60 HP and +91 lb-ft TRQ (Crank); +55 HP and +80 lb-ft TRQ (Wheel). Bluetooth smart (Android and iOS Compatible). 7 power levels and a bypass setting to choose from. Smooth and predictable power delivery. On-board diagnostics and factory safeguards are maintained. Unaffected by dealer factory updates. Plug and play installation. 14-day satisfaction guarantee. 1-year limited warranty - DINANTRONICS X does not carry the factory matching warranty that Dinan is known for. DINANTRONICS X's warranty is a 1-year, product-only warranty, that does not cover consequential damages or labor reimbursement.

Show More Show Less

Dinan Valved Axleback Exhaust - Black - G20, G22

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:8965601

Part#: D660-0091-BLK

In Stock

$ 1,749.99 USD

Add to Wish List

Qty

$ 1,749.99 USD

Add to Wish List

The Dinan G20 330i / G22 430i exhaust grants the B46/B48 4-cylinder improved exhaust flow by reducing back pressure, and also creates a deeper and fuller note, without any added drone or other negative side effects.. The goal of OEM+ and then some. Utilizing factory cut points and mounting mechanics this Dinan exhaust system is a straightforward install with fitment like you would expect from the manufacturer. Going from the plebeian stock dual slash cut 90mm (3.5") tips to the massive Dinan straight cut 102mm (4") ones leaves no doubt that something above and beyond is present. This is solidified by the Dinan logo laser engraved on the tips and the deep growl of the exhaust that is indisputably different than anything one would expect to hear from a base 4-cylinder turbo platform. For those that wish to have options to limit the soundtrack for late night or early morning arrivals/departures, factory valve control is retained. No matter the situation the Dinan valved axle back exhaust system is the answer for the discerning enthusiast looking for performance without sacrifice. Max HP Gain4 @ 6600 RPM - Max Torque (lb-ft) Gain3 @ 6600 RPM Features: Enjoyably louder, sportier sound Drone abatement technologies used to reduce cabin resonance Dual 4" (102mm) double-walled, black ceramic coated clamp-on tips with laser engraved Dinan logo Larger diameter piping for increased flow (85mm to dual 60mm vs. 85mm to dual 83mm) 100% 304 Stainless Steel construction Retains factory valve control Factory-like fitment with included mounting hardware

Show More Show Less

Dinan Performance Ignition Service Kit

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:8421596

Part#: D650-0010KT3

In Stock

$ 244.99 USD

Add to Wish List

Qty

$ 244.99 USD

Add to Wish List

If one of your ignition coils is bad, it is a good idea to replace the plugs to prevent future problems. Great for fixing those rusted / corroded connection. Great for modified or Tuned cars The kit includes: 4 Blue Dinan Coils with locks 4 NGK spark plugs 1 packet of American Grease Stick dielectric grease These Dinan ignition coils feature: Direct plug-and-play. Up to 10% more energy output than stock. Blue housing with Dinan Logo. True upgrade, not just aesthetic.

Show More Show Less

Dinan Free Flow Axle-Back Exhaust - Black Tips - G20 M340

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598404

Part#: D660-0085-BLK

In Stock

11% off MSRP $ 2,536.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,254.99 USD

Add to Wish List

Qty

11% off MSRP

$ 2,536.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,254.99 USD

Add to Wish List

True to form, Dinan has developed this Free Flow stainless exhaust to increasing flow by reducing backpressure, resulting in more power. Best of all, it has a great tone that is aggressive when you want it to be, but pleasant and civilized under normal driving conditions. This system weighs less than the stock system and is constructed out of stainless steel for the quality and performance you'd expect from your BMW.

Show More Show Less

Dinan B46 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G29 G42...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:8076777

Part#: D760-0060

In Stock

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 24% increase in overall volume over OEM inlet. Average of 12.5% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

Dinan License Plate Frame - Stainless Steel

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27205338

Part#: D010-0012

In Stock

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Dinan DINANTRONICS X Performance Tuner - G20 M340i/i xDrive B58 (2020...

Fits 2020 model years only!

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6715739

Part#: D440-0152

Ships in 9 Business Days

11% off MSRP $ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 665.99 USD

Add to Wish List

Qty

11% off MSRP

$ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 665.99 USD

Add to Wish List

The DINANTRONICS X is the newest installment of the highly successful Dinan foray into inline tuning modules. Like its predecessors, it is a highly engineered piece of computer hardware and software that enhances engine performance to levels the stock programming is not allowed to venture. It does this without affecting long-term reliability or the functionality of on-board diagnostic systems when run under recommended operating variables. Unlike its predecessor, however, the DINANTRONICS X is Bluetooth smart and offers convenient access to the adjustment of power levels directly from the palm of your hand. A further advancement beyond its entry-level little brother, the DINANTRONICS SPORT, X connects to additional inputs and/or has a more refined tuning strategy that yields more power as a result. For those that do not wish to (or can't) alter their stock ECU with a more robust engine flash the DINANTRONICS X is a perfect alternative to satiate the craving for "more". Whichever level of engine tuning is ultimately chosen you can be sure to be pleased by the result. The Dinan Difference is possible by employing a full staff of talented engineers that are well rounded in many facets of automotive engineering and backed by a wealth of hands-on knowledge. Stemming from diverse backgrounds not only on racing teams but on standard factory production line vehicles, we have seen it all. Manipulating these signals/maps with an adept hand, all the while keeping an engine running at its best and with the most reliable power, is what Dinan is all about. NOTE: D440-0152 only applies to the 2020 M340i. For other model years of M340i please use D440-0153 (ES4499648). Features: More Power: Max gains of up to +60 HP and +91 lb-ft TRQ (Crank); +55 HP and +80 lb-ft TRQ (Wheel). Bluetooth smart (Android and iOS Compatible). 7 power levels and a bypass setting to choose from. Smooth and predictable power delivery. On-board diagnostics and factory safeguards are maintained. Unaffected by dealer factory updates. Plug and play installation. 14-day satisfaction guarantee. 1-year limited warranty - DINANTRONICS X does not carry the factory matching warranty that Dinan is known for. DINANTRONICS X's warranty is a 1-year, product-only warranty, that does not cover consequential damages or labor reimbursement.

Show More Show Less

Dinan - Carbon Fiber Cold Air Intake - BMW G20 330i G42 230i B46 ...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1362376

Part#: D760-0055

Ships in 5 Business Days

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

Airflow efficiency and maximizing the potential of the stock intake design were the keys to development for the Dinan B48/46 intake. Dinan improves on the factory air box system by delivering more cool, dense air. The increased amount of air feeds a larger volume airbox complete with a larger cone filter that elicits a slightly more audible and sporty tone over its stock counterpart. For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four-year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

Show More Show Less

Dinan Wheel Spacer Pair - 15mm

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21078449

Part#: D210-2029

Ships in 2 Business Days

$ 84.99 USD

Add to Wish List

Qty

$ 84.99 USD

Add to Wish List

Dinan's Wheel Spacers physically move the wheel further away from the hub. In doing so, they give your wheels the desired offset needed to create the stance or look you desire, or clearance necessary to clear brake calipers. When using wheel spacers, longer bolts are required. These are are sold separately but appropriate length bolts for the selected spacer kit are suggested above. Please ensure to pair the correct thread size bolts for your specific application. Features: CNC-machined aluminum. Weight saving design. 66.5mm center bore configuration. 5x112 bolt pattern. 15mm thick. Hub-centric rings on larger spacers. Anodized black. Set of 2.

Show More Show Less

Dinan Cone Seat Lug Bolt Kit - M14x1.25x50mm - Black

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:23880747

Part#: D220-0007

Back Ordered

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Longer lug bolts ensure proper thread engagement when installing wheel spacers. Manufactured from high-quality steel, this set of 10 bolts from Dinan are 50mm in length for pairing with 20mm wheel spacers.

Show More Show Less

Dinan Marque Plate - Black with Centered Logo

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27205366

Part#: D010-0016

Ships in 5 Business Days

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

Dinan Front & Rear Sway Bar Set - BMW G2X G42 XDrive

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37959657

Part#: D120-0635

Ships in 2 Business Days

11% off MSRP $ 899.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 799.99 USD

Add to Wish List

Qty

11% off MSRP

$ 899.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 799.99 USD

Add to Wish List

Anti-roll bars help reduce body roll in all driving situations, but factory versions are often too soft for comfort rather than performance. Dinan tuned anti-roll bars, however, are engineered specifically for each BMW chassis to enhance responsiveness and handling. By minimizing body roll while maintaining optimal mechanical grip, they keep the car more level, providing a planted and confident feel through corners—an essential upgrade for back road and track enthusiasts.

Show More Show Less

Dinan DINANTRONICS X Performance Tuner - G42 230i, G20 330, G22/23 43...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6715743

Part#: D440-0162

Ships in 9 Business Days

11% off MSRP $ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 665.99 USD

Add to Wish List

Qty

11% off MSRP

$ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 665.99 USD

Add to Wish List

The DINANTRONICS X is the newest installment of the highly successful Dinan foray into inline tuning modules. Like its predecessors, it is a highly engineered piece of computer hardware and software that enhances engine performance to levels the stock programming is not allowed to venture. It does this without affecting long-term reliability or the functionality of on-board diagnostic systems when run under recommended operating variables. Unlike its predecessor, however, the DINANTRONICS X is Bluetooth smart and offers convenient access to the adjustment of power levels directly from the palm of your hand. A further advancement beyond its entry-level little brother, the DINANTRONICS SPORT, X connects to additional inputs and has a more refined tuning strategy that yields more power as a result. For those that do not wish to (or can't) alter their stock ECU with a more robust engine flash the DINANTRONICS X is a perfect alternative to satiate the craving for "more". Whichever level of engine tuning is ultimately chosen you can be sure to be pleased by the result. The Dinan Difference is possible by employing a full staff of talented engineers that are well rounded in many facets of automotive engineering and backed by a wealth of hands-on knowledge. Stemming from diverse backgrounds not only on racing teams but on standard factory production line vehicles, we have seen it all. Manipulating these signals/maps with an adept hand, all the while keeping an engine running at its best and with the most reliable power, is what Dinan is all about. Features: More Power: Max gains of up to +26 HP and +36 lb-ft TRQ (Crank); +23 HP and +33 lb-ft TRQ (Wheel). Bluetooth smart (Android and iOS Compatible). 7 power levels and a bypass setting to choose from. Smooth and predictable power delivery. On-board diagnostics and factory safeguards are maintained. Unaffected by dealer factory updates. Plug and play installation. 14-day satisfaction guarantee. 1-year limited warranty - DINANTRONICS X does not carry the factory matching warranty that Dinan is known for. DINANTRONICS X's warranty is a 1-year, product-only warranty, that does not cover consequential damages or labor reimbursement.

Show More Show Less

Dinan Marque Plate - Black with Offset Logo

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:23185034

Part#: D010-0015

Ships in 3 Business Days

$ 41.99

This product was last offered at the strikethrough price on
12-29-2025

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

High-quality stainless marque license plate with offset Dinan logo. This marque plate has an offset logo for use with regular license plate frames to make the Dinan logo look centered in the frame.

EXTENSION/TEE HARNESS G20 M340

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37014865

Part#: D662-0636

Ships in 9 Business Days

$ 153.99 USD

Add to Wish List

Qty

$ 153.99 USD

Add to Wish List

Dinan B58 Carbon Fiber Engine Cover - Gloss Finish - BMW G20 G22/23/2...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14452854

Part#: D590-0003

Ships on Jun 29, 2026

$ 562.99 USD

Add to Wish List

Qty

$ 562.99 USD

Add to Wish List

Borrowing on classic engine/valve cover elements from yesteryear, the Dinan G2x/G4x B58 engine cover takes those queues and incorporates additional elements to form a transformative engine bay dress-up piece like no other. Like the ever-popular and lusted-after E36/E46 Dinan carbon fiber valve covers of the past, the G chassis B58 engine cover mimics the BMW power stripes but with a Dinan twist. Beyond the legacy homage, the 2x2 gloss twill carbon fiber base gives way to opposing matte carbon fiber and white painted accents among the cylinder count callouts. This small touch adds visual intrigue to an otherwise largely feature-deficient landscape. The conflicting finishes also carry the added benefit of tying together elements within the space that may be of the secondary finish for nearly limitless visual versatility in a single piece. Features: 2x2 gloss twill carbon fiber with opposing matte carbon fiber and painted white accents Power stripes featuring Dinan – an homage to OEM and legacy Dinan engine/valve covers Direct replacement of factory engine cover Lighter - OEM cover: 4.1 pounds vs. Dinan Cover: 2.9 pounds Grommets included for quick and easy installation

Show More Show Less

Dinan Experience Package (E) - G2X M340i/M440i

For vehicles with the B58TU (B58D) engine only

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:45997489

Part#: G2XM340IM440IEKT

Ships on Jul 6, 2026

$ 3,564.99 USD

Add to Wish List

Qty

$ 3,564.99 USD

Add to Wish List

Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power adders the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience.

Show More Show Less

Dinan Iridium Spark Plug - B48/B46 B58 S58

For Gen 1 B58 and Gen 2 B58 Engines Only (B58A, B58C, B58D, B58TU) - Not compatible wit... For Gen 1 and Gen 2 B46 / B48 Engines Only (B48A, B46D, B48TU) - Not compatible with G...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:40579788

Part#: D640-0001

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Dinan Iridium Spark Plugs are an excellent upgrade for tuned and even stock engines. Our spark plugs are made from Iridium - one of the strongest materials available. They last longer than other materials with higher melting points, run cooler, resist preignition, and even require less voltage to produce a strong spark. The iridium electrode with its copper core is harder and stronger than other materials, can dissipate heat more easily, and is better protected from melting, cracking, and other limitations found with standard plugs. Dinan spark plugs are great for high boost, high cylinder pressure, high cylinder temperatures, and high-power situations, and they pair nicely with a set of Dinan ignition coils, where applicable. However, they are not only for tuned and higher output vehicles that may benefit from a plug cooler than the factory heat range – they are also applicable to non-tuned / stock vehicles as well!

Show More Show Less

Dinan Heavy Duty Exhaust Band Clamp - 2.75" (70mm)

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38688901

Part#: D662-9228

In Stock

50% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 11.99 USD

Add to Wish List

Qty

50% off MSRP

$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 11.99 USD

Add to Wish List

Perfect for the do-it-yourself customer looking for a band clamp that allows for a 360º pressure connection, this clamp fits the build. Created from stainless steel, the clamp allows for connecting to 70mm (2.75") via a swedged pipe, and provides even clamping pressure and seal around the entire pipe. This makes for a simple install, or a quick removal should the need arise.

Show More Show Less

Dinan Valve Stem Caps - Black

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:35087403

Part#: D757-0007

In Stock

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Details matter.

That's why we've added Dinan Valve Stem Caps to the ever-expanding product lineup! Sold as a set of 4 aluminum caps, each has a Dinan "egg" logo engraved on the face to accentuate even the smallest of details in your high-performance build.

Features:

Nuanced design for universal visual appeal

Dinan "egg" logo on top

Black finish

Aluminum construction

Show More Show Less

Project Cars

SELECT YOUR BMW

Dinan for BMW 3 Series G20 (2019+)

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results