BMW Suspension Parts for BMW 4 Series G22 (2021+)

Bilstein Evo S Suspension Kit - G20 330i M340i, G22 430i M440i (Witho...

For vehicles without EDC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598759

Part#: 47-300118

In Stock

11% off MSRP $ 1,956.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,739.00 USD

Add to Wish List

Qty

11% off MSRP

$ 1,956.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,739.00 USD

Add to Wish List

Bilstein EVO Series coilovers are the next step in the evolution of performance suspension tuning. EVO S is a coilover kit built and tuned specifically for everyday street use. Featuring ride height adjustability in an OE quality, direct fit package. Redesigned threaded bodied dampers allow for extreme lowering of up to 70mm. High quality components ensure longevity through every day use while providing a sportier look. Improved handling and ride comfort are achieved through specific application tuning. Bilstein EVO Series suspension kits are designed and built in Germany with technology tested and tuned on the Nurburgring.

Show More Show Less

Bilstein Evo T1 Suspension Kit - G20 330i M340i, G22 430i M440i (With...

For vehicles without EDC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:640616

Part#: 48-300162

Ships in 3 Business Days

$ 3,261.99 USD

Add to Wish List

Qty

$ 3,261.99 USD

Add to Wish List

Bilstein EVO Series coilovers are the next step in the evolution of performance suspension tuning. EVO T1 is a coilover kit built and tuned specifically for everyday street use and occasional track duty. Featuring ride height adjustability and manually adjustable performance dampers. The 10-stage damping system adjusts both rebound and compression to provide the best handling performance for both street and track conditions. Redesigned threaded bodied dampers allow for extreme lowering of up to 70mm. High quality components provide consistent performance for every adjustment. Greater stability, traction and higher cornering speeds are achieved through specific application tuning. Bilstein EVO Series suspension kits are designed and built in Germany with technology tested and tuned on the Nurburgring.

Show More Show Less

ST XA Coilover Kit - With Electronic Dampers - G22 M440i xDrive ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4703578

Part#: 182200CZ

Back Ordered

$ 1,399.00 USD

Add to Wish List

Qty

$ 1,399.00 USD

Add to Wish List

ST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminum adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup. Latest damping technology for maximum longevity Reduced system friction for effective damping adjustment Galvanized coilover struts with additional coating for an optimized corrosion protection Complete solution with adjustable spring plate, race spring system and bumpers with dust protection Scaled camber adjustment Externally adjustable damping 5 year limited warranty

Show More Show Less

KW Coilover Kit - Variant 1 (V1) - G22 M440i xDrive (With EDC) ...

Fits vehicles with Electronics Dampening Control (EDC)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4908010

Part#: 102200DA

Back Ordered

$ 2,494.00 USD

Add to Wish List

Qty

$ 2,494.00 USD

Add to Wish List

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features: Pre-set damping optimized for a blend of ride comfort and handling with less body roll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrosion resistance, Individually height-adjustable (Front & Rear Lowering: 1.2"-2.0") TUV approved lowering range and operation Expert engineering and design for ease-of-use and long durability, This is the ideal coil-over kit for a BMW owner who does not plan on tracking or autocrossing the car often and mainly just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock, the Variant 1 is an excellent choice. Coil over suspensions are better-engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil-overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

Show More Show Less

ST XA Coilover Kit - Without Electronic Dampers - G22 430i XDrive ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4703577

Part#: 182200CX

In Stock

$ 1,399.00 USD

Add to Wish List

Qty

$ 1,399.00 USD

Add to Wish List

ST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminum adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup. Latest damping technology for maximum longevity Reduced system friction for effective damping adjustment Galvanized coilover struts with additional coating for an optimized corrosion protection Complete solution with adjustable spring plate, race spring system and bumpers with dust protection Scaled camber adjustment Externally adjustable damping 5 year limited warranty

Show More Show Less

KW Coilover Kit - Variant 3 (V3) - G22 M440i xDrive (W/O EDC) ...

Fits vehicles without Electronics Dampening Control (EDC)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4908013

Part#: 352200CZ

Back Ordered

$ 3,474.00 USD

Add to Wish List

Qty

$ 3,474.00 USD

Add to Wish List

The KW V3 coilovers offer a track-worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allow for the end-user to fine-tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. This kit includes and will give you: Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use KW was founded in 1995 and at the beginning, it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test. Range of lowering is 1.2-2.0" for the front and 1.2-2.0" for the rear.

Show More Show Less

Bilstein EVO R Suspension Kit - BMW G20 G22

For vehicles without electronic suspension control

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:8901369

Part#: 89-312780

Ships in 4 Business Days

$ 8,097.99 USD

Add to Wish List

Qty

$ 8,097.99 USD

Add to Wish List

Height adjustable front and rear coilvers from Bilstein. Quicker on the curves and less swerving for faster laps! This kit's key features: 2-Way manually adjustable dampers Monoball mounting equipment 100 different setting variations for precision adjustment 4 height adjustable shock absorbers 4 lowering springs

Show More Show Less

KW Coilover Kit - Variant 3 (V3) - G22 430i xDrive (With EDC) ...

Fits vehicles with Electronics Dampening Control (EDC)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4908008

Part#: 352200CY

Ships in 5 Business Days

$ 3,784.00 USD

Add to Wish List

Qty

$ 3,784.00 USD

Add to Wish List

The KW V3 coilovers offer a track-worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allow for the end-user to fine-tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. This kit includes and will give you: Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use KW was founded in 1995 and at the beginning, it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test. Range of lowering is 1.2-2.0" for the front and 1.2-2.0" for the rear.

Show More Show Less

Bilstein EVO T2 Coilover Kit - BMW G20 330i M340i, G22 430i

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles without adaptive electronic suspension

T#:28570846

Part#: 48-313063

Ships in 4 Business Days

$ 3,971.99 USD

Add to Wish List

Qty

$ 3,971.99 USD

Add to Wish List

Improve your BMW's ride height and handling performance with Bilstein's new EVO T2 Coilover kit! The EVO T2 Coilover kit features Bilstein's 10x10 Pro-Click adjustment system, allowing for 100 adjustment possibilities for compression and rebound to dial in the exact handling characteristics necessary for the street or track. The individual lowering not only looks great, it also significantly optimises the handling of your car: the lower centre of gravity enables higher cornering speeds and faster lap times on the track. And the best thing is: with the EVO T2 you are always on the safe side. The premium coilover suspension naturally comes with a parts certificate and has appropriately dimensioned threads to spare even when lowered more. What’s more, the tyres and wheel arch fit perfectly – technically without any problems and visually appealing. The EVO T2 uses our 10×10 Pro-Click adjustment system: this allows the high-performance suspension to be adjusted separately in both rebound and compression via two aluminium adjustment wheels, easily and without tools: as a new development, the EVO T2 adjusts the compression damping not only at the valve on the piston rod, but also at the special bottom valve. In this way, a total of 100 different damper set-ups are possible – perfect for your individual riding style and the characteristics of the race track. Our engineers have perfected the characteristic curves for you in the legendary BILSTEIN road test. So you can expect highly dynamic damper characteristics for the sportiest steering behaviour in every everyday situation and on the track: the EVO T2 impresses with a sporty, precise steering feel and even more direct contact with the road. Features: Individual and steplessly adjustable lowering of up to 70 mm (varies depending on model, equipment variant and motorisation) Two aluminium adjustment wheels and 100 adjustment possibilities: the 10×10 Pro-Click adjustment regulates rebound and compression separately and safely for an absolutely individual damper setup Damper setting tuned by the BILSTEIN experts Sporty, precise steering feel and even more direct contact with the road High driving pleasure and maximum longevity Paintwork according to the highest OEM standards Additional corrosion protection through zinc-nickel coating for EVO performance coilovers

Show More Show Less

KW Coilover Kit - Variant 2 (V2) - G22 M440i xDrive (With EDC) ...

Fits vehicles with Electronics Dampening Control (EDC)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4908012

Part#: 152200DA

Ships in 5 Business Days

$ 3,024.00 USD

Add to Wish List

Qty

$ 3,024.00 USD

Add to Wish List

These coilovers are for serious drivers and offer up incredible handling without compromise. They are adjustable for the experienced driver and tuner, making them ideal for anybody who wishes to give their vehicle a slight edge over the competition. KW V2 kits offer: Stainless Steel "Inox-Technology" High-quality component parts for durability Adjustable rebound dampening technology Lowering range approved by the TüV Fully finished complete solutions KW was founded in 1995 and at the beginning, the company consisted of only three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test. The range of lowering is 1.2-2" in the front and 1.2-2" in the rear.

Show More Show Less

KW Coilover Kit - Variant 2 (V2) - G22 M440i xDrive (W/O EDC) ...

Fits vehicles without Electronics Dampening Control (EDC)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4908011

Part#: 152200CZ

Ships in 5 Business Days

$ 2,694.00 USD

Add to Wish List

Qty

$ 2,694.00 USD

Add to Wish List

These coilovers are for serious drivers and offer up incredible handling without compromise. They are adjustable for the experienced driver and tuner, making them ideal for anybody who wishes to give their vehicle a slight edge over the competition. KW V2 kits offer: Stainless Steel "Inox-Technology" High-quality component parts for durability Adjustable rebound dampening technology Lowering range approved by the TüV Fully finished complete solutions KW was founded in 1995 and at the beginning, the company consisted of only three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test. The range of lowering is 1.2-2" in the front and 1.2-2" in the rear.

Show More Show Less

KW V3 Leveling Coilover Kit - BMW G22 4 series

For vehicles without electronic suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:50828999

Part#: 35208200CZ

Back Ordered

$ 3,474.00 USD

Add to Wish List

Qty

$ 3,474.00 USD

Add to Wish List

The KW V3 Leveling system offers a sophisticated suspension solution for the 2021+ BMW 4 Series (G22) xDrive.

KW Coilover Kit - Variant 1 (V1) - G22 430i xDrive (W/O EDC) ...

Fits vehicles without Electronics Dampening Control (EDC)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4908003

Part#: 102200CX

Back Ordered

$ 2,184.00 USD

Add to Wish List

Qty

$ 2,184.00 USD

Add to Wish List

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features: Pre-set damping optimized for a blend of ride comfort and handling with less body roll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrosion resistance, Individually height-adjustable (Front & Rear Lowering: 1.2"-2.0") TUV approved lowering range and operation Expert engineering and design for ease-of-use and long durability, This is the ideal coil-over kit for a BMW owner who does not plan on tracking or autocrossing the car often and mainly just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock, the Variant 1 is an excellent choice. Coil over suspensions are better-engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil-overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

Show More Show Less

KW Coilover Kit - Variant 3 (V3) - G22 M440i xDrive (With EDC) ...

Fits vehicles with Electronics Dampening Control (EDC)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4908014

Part#: 352200DA

Back Ordered

$ 3,784.00 USD

Add to Wish List

Qty

$ 3,784.00 USD

Add to Wish List

The KW V3 coilovers offer a track-worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allow for the end-user to fine-tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. This kit includes and will give you: Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use KW was founded in 1995 and at the beginning, it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test. Range of lowering is 1.2-2.0" for the front and 1.2-2.0" for the rear.

Show More Show Less

KW DDC Plug & Play Coilover Kit - G22 430i xDrive (With EDC) ...

Fits vehicles with Electronics Dampening Control (EDC)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4908015

Part#: 39020048

Back Ordered

$ 4,354.00 USD

Add to Wish List

Qty

$ 4,354.00 USD

Add to Wish List

Today, more and more premium vehicles are being fitted with an electronically adaptive suspension system. Before KW DDC Plug & Play coilovers were introduced to the market, you often had to make compromises when customizing your suspension lowering, and often had to eliminate the active electronic control system and comfort features that you had paid extra for. With the adaptive KW DDC Plug & Play coilover suspensions there are no compromises to be made and you can combine the control of your standard damper system with a seamless suspension lowering and the driving dynamics tuned by KW suspensions experienced engineers. During installation, the factory electronic struts are simply replaced by KW “inox-line” stainless steel coilover struts and the adaptive KW dampers are connected to the on-board electronics using your vehicle's original plugs. Fitting a KW DDC Plug & Play coilover suspension requires no further modifications. The standard dampers can simply be replaced with the KW DDC (Dynamic Damping Control) coilover kit. The existing controls and the button installed in the vehicle interior for the operation of the damper control will now operate the KW DDC Plug & Play coilovers. For the first time, the KW DDC Plug & Play coilover kit combines the advantages of a KW coilover suspension with the convenience of the standard electronic damper controls. At the push of a button, the driver can choose between the Comfort, Normal and Sport setup optimized for the KW coilover suspension. In addition, the KW coilover suspension allows individual ride height adjustability within the tested adjustment range. Our original equipment quality suspension technology is compatible with various vehicle manufacturers. As a result, the adaptive KW DDC suspension is instantly recognized by the on-board electronics. So all the displays and controls of your factory vehicle remain fully functional but you get a completely new driving experience.

Show More Show Less

KW Coilover Kit - Variant 3 (V3) - G22 430i xDrive (W/O EDC) ...

Fits vehicles without Electronics Dampening Control (EDC)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4908007

Part#: 352200CX

Back Ordered

$ 3,474.00 USD

Add to Wish List

Qty

$ 3,474.00 USD

Add to Wish List

The KW V3 coilovers offer a track-worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allow for the end-user to fine-tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. This kit includes and will give you: Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use KW was founded in 1995 and at the beginning, it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test. Range of lowering is 1.2-2.0" for the front and 1.2-2.0" for the rear.

Show More Show Less

Fits vehicles with Electronics Dampening Control (EDC)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4908006

Part#: 152200CY

Ships in 5 Business Days

$ 3,024.00 USD

Add to Wish List

Qty

$ 3,024.00 USD

Add to Wish List

These coilovers are for serious drivers and offer up incredible handling without compromise. They are adjustable for the experienced driver and tuner, making them ideal for anybody who wishes to give their vehicle a slight edge over the competition. KW V2 kits offer: Stainless Steel "Inox-Technology" High-quality component parts for durability Adjustable rebound dampening technology Lowering range approved by the TüV Fully finished complete solutions KW was founded in 1995 and at the beginning, the company consisted of only three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test. The range of lowering is 1.2-2" in the front and 1.2-2" in the rear.

Show More Show Less

H&R Sport Spring Set - BMW G20 330/M340, G22/G23 430/M440, G42 M240i ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:587521

Part#: 28662-2

In Stock

15% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 339.15 USD

Add to Wish List

Qty

15% off MSRP

$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 339.15 USD

Add to Wish List

Enhance the look of your BMW with a reduced fender well gap. H&R Sport Springs lowers the vehicle's center of gravity and reduces body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle's suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle.

Show More Show Less

Supplementary Ride Quality & Handling Kit - G2X G42 F9X G0X

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389396

Part#: D193-0121

In Stock

11% off MSRP $ 178.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 158.99 USD

Add to Wish List

Qty

11% off MSRP

$ 178.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 158.99 USD

Add to Wish List

Enhance your BMW's handling and ride quality with the Dinan Performance Springs Kit. Paired with Dinan performance springs, this kit takes your driving experience to the next level. The progressive-rate bump stops included in the kit optimize spring rate, providing additional mechanical grip and preventing bottoming out and binding. Enjoy improved suspension travel and a simplified installation process with all hardware included.

Improved handling
Preserved ride quality
Optimized spring rate for mechanical grip
Maximized suspension travel
Prevention of bottoming out and binding
Simplified installation with included hardware
Earns 1 point towards your Dinan badge

For over 35 years, Dinan has been at the forefront of BMW tuning, blending advancements in modification with a commitment to balanced performance. Installing a Dinan part means not only benefiting from carefully developed and tested components but also enjoying a four-year, 50,000-mile warranty. Embrace the "total package" approach, and once your car is fitted with enough Dinan parts, proudly display the exclusive trunk badge – a symbol of your conversion from stock to Dinan, celebrated by BMW enthusiasts everywhere.

Show More Show Less

Dinan Performance Spring Set - G20 330i M340i, G22 M440i xDrive ...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598360

Part#: D100-0934

In Stock

11% off MSRP $ 393.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 349.99 USD

Add to Wish List

Qty

11% off MSRP

$ 393.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 349.99 USD

Add to Wish List

Improve your handling and ride with the Performance Spring Set from Dinan. This spring set was designed on the road, with track use in mind. It offers the best of both worlds, tight, rigid handling on corners while still smooth and comfortable on the highway and over bumps. You will experience substantially less body roll, as well as less dive under hard braking with these stiffer springs.

Show More Show Less

Turner Monoball Front Thrust Arm Bushings Upgrade - A90 / G20 / G29 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:599479

Part#: 005654LA01

In Stock

Sale - Save 20% $ 454.99

This product was last offered at the strikethrough price on
06-14-2026

$ 363.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 454.99

This product was last offered at the strikethrough price on
06-14-2026

$ 363.99 USD

Add to Wish List

BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

Show More Show Less

H&R Sport Spring Set - BMW G20 330i, G22 430i with Factory Sport Susp...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat! For vehicles with Standard, Sport, or Adaptive Suspension

T#:583687

Part#: 28662-1

In Stock

15% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 339.15 USD

Add to Wish List

Qty

15% off MSRP

$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 339.15 USD

Add to Wish List

With Sport Suspension: Front Lowering: -1.1" Rear Lowering -1.1" Without Sport Suspension: Front Lowering: -1.6" Rear Lowering -1.5" Enhance the look of your BMW G20 330i with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle's suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle.

Show More Show Less

Adjustable Front Lower Control Arms - BMW G20 G22 G23 G42

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5471043

Part#: 00501TMS01

In Stock

Sale - Save 11% $ 910.99

This product was last offered at the strikethrough price on
05-03-2026

$ 813.73 USD

Add to Wish List

Qty

Sale - Save 11%

$ 910.99

This product was last offered at the strikethrough price on
05-03-2026

$ 813.73 USD

Add to Wish List

Looking for upgraded lower control arms that don't limit adjustment capabilities like the OE control arms? These Turner Performance Lower Control Arms may be exactly what you need! These CNC'd billet aluminum control arms allow you to adjust roll center, camber, and track width easily and lock in your adjustments securely.

The construction of these control arms allows for significant weight savings, reducing unsprung weight, while maintaining high levels of strength that is up to track use and abuse. Instead of using traditional jam nuts, these Turner Control Arms utilize a pinch bolt and rotating clamp design that allows high clamping forces to lock in track width and camper specifications without making it difficult to keep bearings properly aligned. Stainless steel spacers are included to enable roll center correction for lowered vehicles. To further improve control arm operation over the OE design, these control arms use FK rod ends and high misalignment solid spherical bushings to get rid of binding and flex.

Features:

Lightweight Aluminum, Titanium, Chromoly and Stainless Steel construction
Correct ball joint angle for full articulation
Clamp design allows for easy access to lock down your alignment settings
Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends
Multiple size stainless steel roll center spacers for precise adjustment

Show More Show Less

034 Motorsport Dynamic+ Billet Adjustable Sway Bar End Links - Rear -...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26771744

Part#: 034-402-4040

Back Ordered

Sale - Save 10% $ 112.00

This product was last offered at the strikethrough price on
06-28-2026

$ 100.80 USD

Add to Wish List

Qty

Sale - Save 10%

$ 112.00

This product was last offered at the strikethrough price on
06-28-2026

$ 100.80 USD

Add to Wish List

Replace your flimsy, imprecise OEM sway bar end links with these performance-engineered Dynamic+ Billet Adjustable Rear Sway Bar End Links for BMW F2x/F3x/G2x Chassis cars from 034Motorsport! 034Motorsport's Dynamic+ Billet Adjustable Rear Sway Bar End Links allow for the uncompromised transfer of suspension movement to the sway bar, and are adjustable in length, allowing you to eliminate preload on the sway bar. 034Motorsport Dynamic+ Billet Adjustable Rear Sway Bar End Links use high-misalignment ball joints, ensuring that the end links do not bind as the suspension articulates. This 034Motorsport Dynamic+ Adjustable Rear Sway Bar End Link Kit has the features, performance, and maintenance-free operation to make it a winner on the street and the track! WHAT IS SWAY BAR PRELOAD? When a sway bar is preloaded, it means that it is already twisted when the car is at rest, and it’s trying to roll the car to one side because of this. This will lead to asymmetric behavior and the car will favor tuning one way versus the other. Preload is detectable when the car is at ride height on a flat surface, and removal of an end link is difficult because the sway bar is already twisted and applying force on the bolt, or installing the end link is difficult because the bar needs to be twisted to insert the bolt through the hole in the sway bar. With equal-length non-adjustable sway bar end links, removing preload is not possible. By utilizing our 034Motorsport adjustable end links, the lengths of each end link can be adjusted so that the end link can be easily installed at ride height without needing to twist the bar to get it to fit. Zero preload provides symmetrical handling in right and left turns. FEATURES: CNC Machined 6061-T6 Aluminum Bodies (Anodized Black for Durability) Zinc Plated Steel Ball Joints OEM+ Quality with Adjustability Quieter with Less Maintenance than Spherical Motorsport End Links +/- 0.75" of Adjustability (1.5" Total Adjustment Range) Adjust Sway Bar Preload - Essential When Corner Balancing Lowered Vehicles Increased Strength for Stiffer Sway Bars, Heavier Loads, and Motorsport Use Improved Sway Bar Reaction Time & Accuracy Compatible with All Stock and Aftermarket Sway Bars. Sold In Pairs OE PART INTERCHANGE: 33506785607 WHAT’S INCLUDED: 2x Billet Aluminum Adjuster Rods 2x Dynamic+ Ball Joints - RH Thread 2x Dynamic+ Ball Joints - LH Thread 2x Jamb Nuts - RH Thread 2x Jamb Nuts - LH Thread 4x M10 Lock Nuts 4x M10 Washers Anti-Seize

Show More Show Less

Dinan Tension Strut Ball Joint Kit - Front - G20 G22/23/26 G29 A90/91...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598376

Part#: D280-0022

In Stock

11% off MSRP $ 479.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 425.99 USD

Add to Wish List

Qty

11% off MSRP

$ 479.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 425.99 USD

Add to Wish List

An underrated component of a proper driver's suspension the monoball kit (tension strut ball joint kit in today's terminology), is a remnant of an era when road feel was something desirable and sought after. Drivers wanted the visceral feel of being connected to the road as the road-racing heritage of BMW M demanded. Dinan embraced this and over the years mastered its craft into a kit that not only satisfied the desire for proper road feel but also made it livable for everyday driving. While stock suspension properties may have swayed from its golden era lineage to more mainstream ideals, Dinan is here to correct those mistakes for those that want a more M-passioned BMW experience. The Dinan Tension Strut Ball Joint Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. The quietest bearings on the market are virtually noise-free so you can live with them every day. These are the only bearings on the market that are sealed using a rubber boot to keep out dirt and road grime stopping them from wearing out prematurely. Features: Improved steering responsiveness. Reduces brake shimmy. Nylon-lined bearings for quiet operation. Machined aluminum housings. Sealed bearings.

Show More Show Less

ECS Adjustable Front Sway Bar End Links (255-315mm) - E8X/E9X F2X/F3X...

Measure before purchasing! This is for custom/lowered applications only and may not fit...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:54959270

Part#: 059091LA01

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 255mm (10") to 315mm (12.4") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints (M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability NOTE: If you've modified your vehicle's suspension with aftermarket struts or coilovers, the mounting location for the sway bar end link may have moved. To confirm fitment with our adjustable end links, please measure the distance between the sway bar and the mounting location on the strut body with the vehicle at ride height and confirm that it is within the 255 mm - 315mm range of adjustment.

Show More Show Less

Dinan Front & Rear Sway Bar Set - BMW G2X G42 RWD

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37959656

Part#: D120-0630

In Stock

51% off MSRP $ 956.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 467.99 USD

Add to Wish List

Qty

51% off MSRP

$ 956.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 467.99 USD

Add to Wish List

Anti-roll bars help reduce body roll in all driving situations, but factory versions are often too soft for comfort rather than performance. Dinan tuned anti-roll bars, however, are engineered specifically for each BMW chassis to enhance responsiveness and handling. By minimizing body roll while maintaining optimal mechanical grip, they keep the car more level, providing a planted and confident feel through corners—an essential upgrade for back road and track enthusiasts.

Show More Show Less

SPL Parts Rear Swaybar End Links - G29 Z4, A90 Supra

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:587628

Part#: SPL-RE-G29

Ships in 2 Business Days

$ 224.00 USD

Add to Wish List

Qty

$ 224.00 USD

Add to Wish List

SPL Parts Rear Endlinks (RE) feature massive 1/2" FK Rod Ends to provide the highest load capacity for use with stock or stiffer aftermarket sway bars. Custom machined High Misalignment Studs offer extreme articulation capability (65deg) to prevent the endlink from binding when used with different adjustment holes on aftermarket sway bars.

Show More Show Less

Bilstein B4 OE Replacement Suspension Strut Assembly Front Left - G20...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles with Standard Suspension without Electronic Suspension

T#:4469708

Part#: 22-303301

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

Bilstein B4 OE Replacement shocks are designed to maintain original ride quality of your vehicle, while meeting or exceeding OE standards. These shocks are an excellent replacement for OE with regard to both cost and quality and Bilstein's world-renown reputation. If your front end ride quality is becoming increasingly poor over time, it may be time to replace your strut assemblies. Bilstein's B4 series gas shocks are the perfect replacement for a driver looking to replace their worn suspension parts with a reputable aftermarket offering. Can be paired with OE springs. Fits front left. Cross Reference: Autozone 22303301 BMW 31316888453

Show More Show Less

B4 Rear Shock Absorber OE Replacement(Priced Each) - G20/G22 Sport Su...

For vehicles with M Sport suspension and without Adaptive Suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles with Sport Suspension without Electronic Suspension

T#:4442248

Part#: 19-323305

In Stock

$ 109.00 USD

Add to Wish List

Qty

$ 109.00 USD

Add to Wish List

Bilstein B4 OE Replacement shocks are designed to maintain original ride quality of your vehicle, while meeting or exceeding OE standards. These shocks are an excellent replacement for OE with regard to both cost and quality and Bilstein's world-renown reputation. If your ride quality is becoming increasingly poor over time, it may be time to replace your rear shock absorbers. Cross Reference: 33526888481 33526879378 33526879315 33526879302 33526879400 33526879379

Show More Show Less

Bilstein B4 OE Replacement Suspension Strut Assembly Front Right - G2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles with Standard Suspension without Electronic Suspension

T#:4469709

Part#: 22-305008

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

Bilstein B4 OE Replacement shocks are designed to maintain original ride quality of your vehicle, while meeting or exceeding OE standards. These shocks are an excellent replacement for OE with regard to both cost and quality and Bilstein's world-renown reputation. If your front end ride quality is becoming increasingly poor over time, it may be time to replace your strut assemblies. Bilstein's B4 series gas shocks are the perfect replacement for a driver looking to replace their worn suspension parts with a reputable aftermarket offering. Can be paired with OE springs. Fits front right. Cross Reference: Autozone 22305008 BMW 31316888454

Show More Show Less

Bilstein B4 OE Replacement Suspension Strut Assembly Front Set - G20 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles with Standard Suspension without Electronic Suspension

T#:4510725

Part#: 22-303301KT

In Stock

$ 318.00 USD

Add to Wish List

Qty

$ 318.00 USD

Add to Wish List

Bilstein B4 OE Replacement shocks are designed to maintain original ride quality of your vehicle, while meeting or exceeding OE standards. These shocks are an excellent replacement for OE with regard to both cost and quality and Bilstein's world-renown reputation. If your front end ride quality is becoming increasingly poor over time, it may be time to replace your strut assemblies. Bilstein's B4 series gas shocks are the perfect replacement for a driver looking to replace their worn suspension parts with a reputable aftermarket offering. Can be paired with OE springs. Fits front (pair).

Show More Show Less

H&R Sway Bar Kit - G20/G22/G23

Fits RWD Models Only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:4319897

Part#: 72462

In Stock

10% off MSRP $ 786.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 708.99 USD

Limited Qty Sale

Add to Wish List

Qty

10% off MSRP

$ 786.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 708.99 USD

Limited Qty Sale

Add to Wish List

Dial in oversteer and understeer to your ideal handling specifications H&R Sway Bars are the perfect compliment to H&R Springs Coil Overs Performance Shocks and Cup Kits. Designed to reduce body roll, increase lateral stiffness, and improve handling. H&R Sway Bars are bent on proprietary machines designed by H&R that seamlessly produce beautiful complex curves making H&R Sway Bars a perfect fit for your vehicle. All H&R Sway Bar kits have been shot peened and heat treated and feature precision forged ends. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks and don't require lubrication. That means no mess no maintenance, just bolt in H&R Sway Bars and go! Kit incudes H&R Front 28mm Sway bar H&R Rear 19mm Sway bar H&R Front and rear sway bar bushings *Note: These bars are not adjustable. **Does not fit M340i.

Show More Show Less

Air Lift Performance 3H Digital Air Management

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:384243

Part#: 27695

In Stock at Vendor

$ 2,578.99 USD

Add to Wish List

Qty

$ 2,578.99 USD

Add to Wish List

Introducing the revolutionary Air Lift Performance 3H Height + Pressure Air Suspension Control System for BMW enthusiasts from Turner Motorsport. After three years of meticulous development and testing, Air Lift has created their most advanced product yet.

Combines pressure-based control with ride-height sensing technology for enhanced performance
Features a brilliant TFT color display for intuitive control and monitoring
Mobile app compatibility allows for easy adjustment of ride height and system settings via Bluetooth
State-of-the-art manifold with a 32-bit processor for precise control over all four corners of your BMW
Improved height sensor arm design for increased durability and longevity
Show mode feature enables height management while the vehicle is off

Kit Features:

Height + Pressure 3/8" Manifold
Air Lift Black Anodized Aluminum Display
Fully Integrated Wiring Harness That Also Incorporates Compressor Power
Necessary Fittings, Hardware, and Connectors For a Complete Install
Air Lift Automatically Draining Water Trap
60ft of 3/8" Air Line
3H Includes Rotational Height Sensors, Wiring, and Linkages
FREE Smart Phone App Which Works on Both iPhone and Android Integrated Into the Manifold, No Extra Module to Buy! Both Iphone and Android app are currently available

Show More Show Less

Air Lift Performance 3H 1/4" Air Management Starter Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25109074

Part#: 27791

Ships in 5 Business Days

$ 2,948.99 USD

Add to Wish List

Qty

$ 2,948.99 USD

Add to Wish List

We asked ourselves: what would the ultimate air suspension be like? How would it combine an easy-to-use, reliable, and feature-rich system with powerful technology and beautiful design? Air Lift Performance 3H is the result of three years of development and testing. It is the most advanced product we have ever created. Air Lift Performance 3H combines pressure-based control with ride-height sensing technology. While both types of air management have been utilized before, this is the first product to harness the benefits of both sytems - instantly improving suspension control, performance, and vehicle ride flexibility.

Show More Show Less

Pressure To Height Upgrade

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:384245

Part#: 27705

In Stock at Vendor

$ 795.00 USD

Add to Wish List

Qty

$ 795.00 USD

Add to Wish List

BMW's performance with the Air Lift 3H Upgrade, is designed to enhance your existing 3P system. This convenient kit includes four height sensors along with all the necessary wiring and mounting hardware for a seamless installation. Key Features: Four height sensors for precise height control. Comprehensive wiring and mounting hardware included. Elevate your BMW's suspension to new heights of performance and control.

Show More Show Less

H&R Sport Sway Bar (Front) - G20/G22/G23 (RWD)

For RWD Models Only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:4319884

Part#: 70462

Ships in 4 Business Days

10% off MSRP $ 439.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.99 USD

Add to Wish List

Qty

10% off MSRP

$ 439.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.99 USD

Add to Wish List

Dial in oversteer and understeer to your ideal handling specifications H&R Sway Bars are the perfect compliment to H&R Springs Coil Overs Performance Shocks and Cup Kits. Designed to reduce body roll, increase lateral stiffness, and improve handling. H&R Sway Bars are bent on proprietary machines designed by H&R that seamlessly produce beautiful complex curves making H&R Sway Bars a perfect fit for your vehicle. All H&R Sway Bar kits have been shot peened and heat treated and feature precision forged ends. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks and don't require lubrication. That means no mess no maintenance, just bolt in H&R Sway Bars and go! Kit incudes H&R Front 28mm Sway bar H&R Front sway bar bushings *Note: This bar is not adjustable.

Show More Show Less

Vargas Carbon Fiber Strut Braces - Black (G2X)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4662411

Part#: VTT-G2X-STRBLK

Ships on Jul 22, 2026

Sale - Save 15% $ 283.99

This product was last offered at the strikethrough price on
07-02-2026

$ 241.39 USD

Add to Wish List

Qty

Sale - Save 15%

$ 283.99

This product was last offered at the strikethrough price on
07-02-2026

$ 241.39 USD

Add to Wish List

Vargas has redesigned their line of G8x strut bars for the G2x platform. Featuring a set of carbon fiber strut bars with ends CNC machined from 6061-T6 aluminum and anodized in Black. These fit all 2019+ G2X vehicles regardless of the engine Includes: 2 M10 Flange bolts 2 M8 Flange bolts, and nuts *Note: 2021 models can choose to reuse factory hardware, strut bars may NOT work with all intakes.

Show More Show Less

Dinan Front & Rear Sway Bar Set - BMW G2X G42 XDrive

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37959657

Part#: D120-0635

Ships in 3 Business Days

11% off MSRP $ 956.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 849.99 USD

Add to Wish List

Qty

11% off MSRP

$ 956.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 849.99 USD

Add to Wish List

Anti-roll bars help reduce body roll in all driving situations, but factory versions are often too soft for comfort rather than performance. Dinan tuned anti-roll bars, however, are engineered specifically for each BMW chassis to enhance responsiveness and handling. By minimizing body roll while maintaining optimal mechanical grip, they keep the car more level, providing a planted and confident feel through corners—an essential upgrade for back road and track enthusiasts.

Show More Show Less

H&R Street Performance Coilovers - G20 330/M340i xDrive, G22 430/M440...

For vehicles without Adaptive Suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat! For vehicles with Standard & Sport Suspension, not compatible with Adaptive Suspension

T#:3586295

Part#: 28658-5

Ships in 4 Business Days

10% off MSRP $ 2,480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,232.00 USD

Add to Wish List

Qty

10% off MSRP

$ 2,480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,232.00 USD

Add to Wish List

G20/G22 AWD - Street perfomance Coilovers - 1.2" - 2.1" F Lowering - 1.0" - 2.1" R Lowering H&R has dedicated almost four decades to the suspension industry and it definitely shines through in the end product. Their teams of engineers and designers have consistently produced products obtaining the coveted TUV & ISO certification for safety and quality. 100% German made, the line of H&R coilovers is the original aftermarket suspension, but still one of the best. H&R suspension components are synonymous with quality. Since the inception of H&R in the late 1970s, they have been making some of the highest quality suspension components available. With a need for an improved suspension in the automotive aftermarket, H&R essentially created the modern-day coilover that we are all used to. Not only concentrated on “stance,” H&R considered high quality materials and ride comfort extremely important. Bring some of that German engineering to your vehicle with a set of H&R street performance coilovers. With the adjustability of ride height, the fully threaded, custom valved suspension system will offer high performance with superb ride comfort and handling. Progressive rate springs both front and rear assure that no matter what height you have your vehicle set at, your ride will be great. By lowering the vehicle's center of gravity, less body roll will be experienced during hard cornering with a more balanced vehicle weight.

Show More Show Less

Dinan Billet Front Strut Tower Brace Bars - BMW G22/23/26 4-Series ...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5567103

Part#: D180-0013

Ships in 10 Business Days

11% off MSRP $ 370.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 328.99 USD

Add to Wish List

Qty

11% off MSRP

$ 370.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 328.99 USD

Add to Wish List

The Dinan G2x Strut Tower Braces provide additional rigidity and sharper handling to the chassis by reducing flex under hard cornering conditions. With more control, spirited driving becomes easier and infinitely more enjoyable. Not only do the braces provide a performance benefit but they replace arguably the biggest eyesore in the factory engine compartment. Transforming the blight that is the factory smashed aluminum tubes into a notable highlight that augments the engine bay rather than detract from it. The attractive black anodized billet aluminum braces can be installed in a matter of minutes and used in conjunction with either the stock or Dinan intake systems with the brace valley (D760-0058 / D760-0059). Features: Improved chassis rigidity. Decreased flex during cornering. Solid black anodized billet aluminum for maximum strength and visual appeal. Compatible with stock and Dinan Intake Systems with brace valley (D760-0058 / D760-0059) Bolt-on installation.

Show More Show Less

Vargas Carbon Fiber Strut Braces - Blue (G2X)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4662413

Part#: VTT-G2X-STRBLU

Ships in 5 Business Days

Sale - Save 15% $ 283.99

This product was last offered at the strikethrough price on
07-02-2026

$ 241.39 USD

Add to Wish List

Qty

Sale - Save 15%

$ 283.99

This product was last offered at the strikethrough price on
07-02-2026

$ 241.39 USD

Add to Wish List

Vargas has redesigned their line of G8x strut bars for the G2x platform. Featuring a set of carbon fiber strut bars with ends CNC machined from 6061-T6 aluminum and anodized in Blue. These fit all 2019+ G2X vehicles regardless of the engine Includes: 2 M10 Flange bolts 2 M8 Flange bolts, and nuts *Note: 2021 models can choose to reuse factory hardware, strut bars may NOT work with all intakes.

Show More Show Less

H&R Sport Sway Bar (Front) - G20/G22/G23 (xDrive)

For xDrive Models Only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:4319888

Part#: 70462-2

Ships in 4 Business Days

10% off MSRP $ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 386.99 USD

Add to Wish List

Qty

10% off MSRP

$ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 386.99 USD

Add to Wish List

Dial in oversteer and understeer to your ideal handling specifications H&R Sway Bars are the perfect compliment to H&R Springs Coil Overs Performance Shocks and Cup Kits. Designed to reduce body roll, increase lateral stiffness, and improve handling. H&R Sway Bars are bent on proprietary machines designed by H&R that seamlessly produce beautiful complex curves making H&R Sway Bars a perfect fit for your vehicle. All H&R Sway Bar kits have been shot peened and heat treated and feature precision forged ends. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks and don't require lubrication. That means no mess no maintenance, just bolt in H&R Sway Bars and go! Kit incudes H&R Front 26mm Sway bar H&R Front sway bar bushings *Note: This bar is not adjustable.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW 4 Series G22 (2021+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results