BMW Brakes & Brake Parts for BMW 4 Series G22 (2021+)

BMW G20 Right Side Brake Rotor features Zimmermann's advanced Coat Z technology, designed for exceptional durability and performance. These vented rotors are treated with a specialized water-based solution and heated to cure the coating and remove any residual oils from the manufacturing process, ensuring a robust and long-lasting rotor surface.

• Durable Coating: The Coat Z treatment provides outstanding resistance to road salt, solvents, and other corrosive elements, enhancing the rotor’s lifespan and performance.
• Ready for Installation: The rotors arrive pre-treated and do not require additional cleaning before installation, simplifying the setup process.
• Enhanced Appearance: The Coat Z finish helps maintain a clean and attractive look, ideal for vehicles with open-spoke alloy wheels.
• Improved Performance: Proper bedding of new brake pads on these rotors ensures optimal braking performance, reduces dusting, extends pad life, and minimizes brake noise.

Turner Motorsport’s BMW G20 Right Side Brake Rotor offers a blend of durability, aesthetics, and performance for a superior driving experience.

Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer. 

• Dual pump pistons raises the saddle to maximum height in only 5 pump strokes, with minimum effort.
• Special low profile thick frame side plates and reinforced lift arm for added strength and use.
• Wide track front wheels help provide chassis torsion control and durability.
• Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
• Ball bearing mounted rear swivel caster wheels for easy maneuverability.
• Side mounted handles for carrying and easy positioning.
• Overload and bypass safety valve prevents jack overload and over extension.
• Two piece quick release padded handle for storage or transport.

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Lenght 50"
• Shipping Weight 50 lbs

The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty  flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.  

Min. Height is 10.6".

Max Height is 15.4".

Large 7" diameter base.

Outer support tube is 2-1/8" in diameter.

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Looking for the ultimate upgrade in braking power, performance, and aesthetics?

This complete retrofit kit comes directly from M-Performance, BMW's in-house performance accessory brand. Unlike other big brake kits, this kit has been developed by BMW's team of vehicle engineers, making it an educated choice for even the most discerning enthusiast.

Includes:

Ventilated, dimpled, and slotted front left brake rotor - 34106895647 Ventilated, dimpled, and slotted front right brake rotor - 34106895648 Front brake pad set - 34106888459 Left front brake caliper with hardware, red - 34106891343 Right front brake caliper with hardware, red - 34106891344 Front brake pad wear sensor - 34356870349 Backing plate, front left - 34106871337 Backing plate, front right - 34106871338 Ventilated, dimpled, and slotted rear left brake rotor - 34206896227 Ventilated, dimpled, and slotted rear right brake rotor - 34206896228 Rear left brake caliper, red - 34206890757 Rear right brake caliper, red - 34206890758 Rear left brake caliper mounting bracket, red - 34206890759 Rear right brake caliper mounting bracket, red - 34206890760 Electronic parking brake actuator - 34216894091 Rear brake pad set - 34206888835 Rear brake pad wear sensor - 34356870354 Backing plate, rear left - 34206871341 Backing plate, rear right - 34206871342