Enhance Your BMW with the Magnaflow Universal Muffler

Looking for an affordable way to replace your BMW's muffler and transform its exhaust note? Your search ends here! The brand-new Magnaflow Universal Muffler is your budget-friendly solution, designed to elevate your BMW's sound and style.

Key Features:

• Budget-Friendly: The Magnaflow Universal Muffler is the go-to choice for budget-conscious BMW owners seeking an economical way to enhance their vehicle's sound.
• Enhanced Sound: This muffler delivers an improved exhaust note, creating a deeper, more attractive tone that will make your BMW stand out from the crowd.
• Universal Fit: With its universal fit, it is compatible with a range of BMW models, ensuring a seamless installation process.
• Quality Construction: Crafted from durable materials, this muffler is built to last, providing long-term performance and value.
• Turner Motorsport Approved: Endorsed by Turner Motorsport, a renowned name in the BMW community, you can trust this muffler to meet your expectations for quality and performance.

Say goodbye to that noisy ride and give your BMW the sound it deserves with the Magnaflow Universal Muffler. Upgrade today!

Let’s be honest—what’s the point of owning a B48-powered BMW if you can’t hear it? The factory G2X 330i/430i rear muffler assembly is oversized, heavy, and overly restrictive, muting the deep, aggressive tone that your engine was designed to produce. Our Muffler Delete System is the perfect solution for enthusiasts looking to unleash that signature turbocharged soundtrack without the cost of a full cat-back system.

Engineered and manufactured in-house, this system replaces the factory rear muffler with a free-flowing, TIG-welded 304 stainless steel setup designed to enhance tone, reduce weight, and maintain OE-level fitment and quality. At the front, 3" primary tubing mates seamlessly to your factory midpipe using a durable stainless steel sleeve clamp. At the rear axle, the primary tubing transitions to dual 3" adjustable tailpipe sections for a clean, yet aggressive look. These tailpipe sections offer compatibility with our suite of 4" exhaust tips, allowing you to tailor the system's appearance to your liking. Accuseal-style, slip-fit joints allow for easy adjustment, ensuring perfect tip placement inside the factory rear diffuser. The result? A more engaging exhaust note and a clean, motorsport-inspired appearance that transforms your BMW’s personality both visually and acoustically.

Upgrade your vehicle's muffler affordably with the Magnaflow Universal Muffler, providing a solution to loud exhausts without breaking the bank. Crafted from 100% stainless steel, these mufflers are built to endure extreme conditions, ensuring durability and reliability.

Key Benefits:

• 100% stainless steel construction for robustness
• Lap-joint welding ensures solid build quality
• Free-flowing, straight-through design for enhanced performance
• Stainless mesh wrap and acoustical fiber fill deliver a smooth, deep tone
• Packed tightly for long-lasting performance without sound degradation

Features:

• 2.5'' Inlet and Outlet
• 14'' body length
• 20'' overall length
• May require welding/fabricating for fitting; not a direct fit for any specific car model

For over 30 years, Active Autowerke has been the one to turn to for high-quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. 

The B46 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance.

Features Include

NO CEL when using this downpipe

GESI EPA registered high flow and fully OBD2 compliant

Casted upper stainless steel V-Band for precise fitment

3 inch diameter piping allows for maximum power output

Quicker turbo spool

Rated for 500 to 850 hp applications

Withstands up to 1500° F

Can reach operational efficiency within 9 seconds of startup

Easily bolts-on – no cutting or welding required

Durable construction from TIG welded 304 stainless steel

Ultra high flow 400 cell per square inch catalyst

EPA certified for use on OBD2 vehicles (1996 and newer) except in California

304 stainless steel substrate in catalytic converter is furnace braised to the mantle for outstanding durability

GESi® proprietary precious metal loading technology ensures greatly reduced emissions

Both passengers and drivers are safe from harmful emissions and noise

Precise fitment

Made in Miami, Florida

Covered by 5 Year / 50,000 Mile Warranty (on shell and tube ends)

FITMENT NOTE: For G-Chassis models (G20, G22), the cutoff build date of 08/2020 is important as cars produced after that date have a downpipe with different bracket locations. Cars with a build date of 08/2020 and earlier have the brackets in a V configuration and will need Active Autowerke p/n 11-065. Cars with a build date of 09/2020 and later have the brackets in a straight line and require Active Autowerke p/n 11-065G. If your car was built in the cutover months 08/2020 and 09/2020, please call in or email us your VIN so we can ensure you get the correct downpipe.

Want to install a downpipe on your B58 equipped BMW, but still need to pass emissions? Evolution Racewerks has the answer for you with their B58 Catted downpipe. The Evolution Racewerks Competition Series Catless Downpipes is constructed from 304 stainless steel, featuring mandrel bent piping.  These are 100% TIG welded by in house fabricators and built in the USA! 

The factory turbocharger turbine housing utilizes a V-Band flange which has been duplicated and CNC machined cut out of billet 304 stainless steel. Stainless Steel CNC machined O2 sensor and laser cut brackets are TIG welded using stainless steel rods. The O2 sensor remains positioned at the factory location. Also, since Evolution Racewerks uses a larger 4.5" pipe right after the turbocharger, turbo backpressure is significantly reduced, resulting in less exhaust turbulence and backpressure which again improves throttle response and decreasing turbo lag.

Achieving precise exhaust fitment can be tricky—especially when the exhaust hanger has room to slide. This movement can cause annoying rattles or even lead to contact with the underbody or rear bumper. The ECS Tuning Exhaust Locking Collar offers a simple and effective fix. Designed to clamp securely around the exhaust hanger, this collar keeps everything firmly in place, eliminating unwanted movement.

Crafted from high-strength 6031 billet aluminum and finished in a sleek black anodized coating, it delivers both durability and corrosion resistance. With this collar in place, your exhaust stays exactly where it should—no rattles, no surprises.

Product Design:

Made from precision machined 6061 aluminum Black anodized finish Stainless steel M5 X 0.8mm hardware Installation & Support:

Install the locking collar around your exhaust hanger, position the hanger in place, and snug the locking collar down in place against the hanger! ECS Exhaust Hanger Locking Collars are available for 10mm and 12mm exhaust hangers. Please measure your hangers before ordering. The 12mm locking collar can be found HERE.