BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 5 Series G30 (2017+)

OEM Bosch Pre-Cat Oxygen Sensor - B58

T#:639141

Part#: 11788644371

In Stock

$ 159.99

This product was last offered at the strikethrough price on
05-07-2026

$ 146.99 USD

Add to Wish List

Qty

$ 146.99 USD

Add to Wish List

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the longest and best performance for the price. This is the OEM Bosch oxygen sensor for BMW's with the B58 engine. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Bav Auto Oxygen Sensor Tool - Angled Handle - 7/8"

10X Entries Into Our F80 M3 Sweepstakes

T#:580382

Part#: B8800066

Ships in 10 Business Days

Sale - Save 25% $ 49.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 49.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.49 USD

Add to Wish List

Slotted, pivoting head has both hexagon and double hexagon drive. Angled handle reaches around obstructions. Fits all Oxygen sensors with 7/8in (22mm) hex.

Genuine BMW Exhaust Clamp

T#:48354

Part#: 18307560781

Ships in 1 day

8% off MSRP $ 75.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 69.99 USD

Add to Wish List

Qty

8% off MSRP

$ 75.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 69.99 USD

Add to Wish List

Genuine BMW Clamping Bush - D=75Mm
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E65,E70 X5 X5,E71 X6,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
M57,N20,N26,N52,N52N,N55,N57N,N62,S63

Show More Show Less

Genuine BMW Collar Screw

T#:59956

Part#: 33306785433

In Stock

7% off MSRP $ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 53.99 USD

Add to Wish List

Qty

7% off MSRP

$ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 53.99 USD

Add to Wish List

Genuine BMW Collar Screw - M14X112-10.9

Dinan Heavy Duty Exhaust Band Clamp - 2.75" (70mm)

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:38688901

Part#: D662-9228

In Stock

8% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Qty

8% off MSRP

$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Perfect for the do-it-yourself customer looking for a band clamp that allows for a 360º pressure connection, this clamp fits the build. Created from stainless steel, the clamp allows for connecting to 70mm (2.75") via a swedged pipe, and provides even clamping pressure and seal around the entire pipe. This makes for a simple install, or a quick removal should the need arise.

Show More Show Less

M Performance Exhaust Flap Actuator Plug Cover - F2X F3X

T#:539370

Part#: 18302411427

In Stock

3% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 30.99 USD

Add to Wish List

Qty

3% off MSRP

$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 30.99 USD

Add to Wish List

This plug cover protects the actuator plug when a non-actuated exhaust is installed on the vehicle.

Fits the following BMWs:
All F2X and F3X models.

Stainless Steel V-Band Clamp - 2.5"

10X Entries Into Our F80 M3 Sweepstakes

T#:587344

Part#: TMS25VBKT

In Stock

Sale - Save 25% $ 49.99

This product was last offered at the strikethrough price on
06-14-2026

$ 37.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 49.99

This product was last offered at the strikethrough price on
06-14-2026

$ 37.49 USD

Add to Wish List

Ensure you are building your custom exhaust system with only the best! This V-Band Clamp is made completely of T304 stainless steel for high strength and corrosion resistance and comes with zinc-coated hardware. PART DESIGN Weld Rings are made from T304 Stainless Steel for corrosion resistance Weld Rings are 2.5" inside diameter (ID) to slip over a 2.5" OD tube Weld Rings feature a unique "centering ring" on the ID to aid in the alignment of assembly V-Band clamp is T304 Stainless Steel Securing hardware is Zinc-coated steel with high-temp poly. lock nut INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.

Show More Show Less

Universal Stainless Steel 90 Degree Pipe - 3.0" OD

10X Entries Into Our F80 M3 Sweepstakes

T#:587361

Part#: TMS3090PKT

In Stock

Sale - Save 15% $ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.85 USD

Add to Wish List

Qty

Sale - Save 15%

$ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.85 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 3.0" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability Minimum Leg Length - 8.25" Bend Radius - 4.75" @ 90° angle

Show More Show Less

CTS Turbo High Flow Catted Downpipe

T#:18932307

Part#: EXH-DP-0037-CAT

In Stock

$ 429.99 USD

Add to Wish List

Qty

$ 429.99 USD

Add to Wish List

The CTS Turbo High-Flow Cat for the BMW B46 is made to maximize exhaust flow for the highest power gains. Do not compromise performance and sound with factory parts – unleash your BMW’s potential! Designed using the latest in CAD technology; this part is made to fit perfectly in place of your factory downpipe. Manufactured from T304 stainless steel, hand TIG welded and back-purged to ensure years of reliable performance. Product Details: Precisely designed and tested on a real car in the real world T304 stainless steel, TIG welded back-purged construction Replaces restrictive factory downpipe with high-flow 200 cell catalytic converter Great power upgrade with uncompromising performance Incredible sporty exhaust sound, subtle when cruising No drone with factory exhaust The use of stage 2 software is strongly recommended to avoid the CEL from coming on.

Show More Show Less

Valvetronic Designs Universal Y Pipe Adapter - 2.5" (63mm)

T#:53149938

Part#: VTD.YPIPE.63MM

In Stock

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

Perfect for when you need to connect a single muffler to dual piping or add two tips to your single muffler!

Bav Auto Extra Long Oxygen Sensor Tool - 1/2" Drive, 7/8" x 6" ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580383

Part#: B8800067

Ships in 10 Business Days

Sale - Save 20% $ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD

Add to Wish List

This 1/2" Drive, 7/8" x 6" Extra Long O2 sensor tool is used to remove difficult to reach oxygen sensors.

Dinan Free Flow Axle Back Exhaust System

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:637468

Part#: D660-0078-BLK

Ships in 7 Business Days

11% off MSRP $ 2,306.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,049.99 USD

Add to Wish List

Qty

11% off MSRP

$ 2,306.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,049.99 USD

Add to Wish List

Utilizing the same muffler as its B58 siblings the G30 540i exhaust improves exhaust flow by reducing back pressure, resulting in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration.

Show More Show Less

Stainless Steel V-Band Clamp - 3.0"

10X Entries Into Our F80 M3 Sweepstakes

T#:587341

Part#: TMS30VBKT

In Stock

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

Ensure you are building your custom exhaust system with only the best! This V-Band Clamp is made completely of T304 stainless steel for high strength and corrosion resistance and comes with zinc-coated hardware. PART DESIGN Weld Rings are made from T304 Stainless Steel for corrosion resistance Weld Rings are 3.0" inside diameter (ID) to slip over a 3.0" OD tube Weld Rings feature a unique "centering ring" on the ID to aid in the alignment of assembly V-Band clamp is T304 Stainless Steel Securing hardware is Zinc-coated steel with high-temp poly. lock nut INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.

Show More Show Less

2.5" OD Stainless Steel "U-J Bend" - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:22756729

Part#: 028092ECS03AKT

In Stock

Sale - Save 5% $ 46.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.64 USD

Add to Wish List

Qty

Sale - Save 5%

$ 46.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.64 USD

Add to Wish List

2.5" OD Stainless Steel "U-J Bend"

Revamp your BMW's exhaust system with the 2.5" OD Stainless Steel "U-J Bend". This high-quality "U-J Bend" is specifically designed for BMW vehicles, offering several advantages for improved exhaust performance and durability. Engineered with precision and quality in mind, it provides:

Durable stainless steel construction ensures longevity and reliability
"U-J Bend" design facilitates smooth exhaust flow
Easy installation with a 2.5" outer diameter
Compatible with various BMW models

Upgrade your BMW's exhaust system with this stainless steel "U-J Bend".

Show More Show Less

Universal Exhaust Pipe Reducer - 3" ID To 65mm OD

10X Entries Into Our F80 M3 Sweepstakes

T#:587349

Part#: TMS3065ERKT

Ships on Mar 1, 2027

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Connect your differently sized exhaust pipes quick and easy with this T304 stainless steel exhaust pipe reducer. PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features a raw finish 3.0" ID (Slip fit) X 65mm OD (Butt) connections 1.5mm (.060") wall thickness tubing for durability Length on 65mm OD side - 2.25" Length on 3.0" ID side - 3.50"

Show More Show Less

Downpipe To Catback Reducer - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:587348

Part#: 008709ECS03A

Ships on Mar 1, 2027

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

Embark on your custom exhaust project confidently with the ECS Tuning Universal Exhaust catalog, offering quality and price-friendly options. Crafted from T304 Stainless Steel for corrosion resistance, these items feature premium benefits akin to our In-House Engineered Exhaust Systems. With a 3.0" ID (Slip fit) X 65mm OD (Butt) connections, 1.5mm (.060") wall thickness tubing ensures durability. Length on the 65mm OD side is 2.25" while on the 3.0" ID side is 3.50". Ideal for fabricating your unique exhaust system, these universal parts guarantee top-tier quality and longevity.

Benefits:

Crafted from T304 Stainless Steel for corrosion resistance
Features premium benefits akin to In-House Engineered Exhaust Systems
Durable construction with 1.5mm (.060") wall thickness tubing
Ideal for fabricating custom exhaust projects
Ensures top-tier quality and longevity

Show More Show Less

Universal Stainless Steel J-Pipe - 2.5" OD

10X Entries Into Our F80 M3 Sweepstakes

T#:587362

Part#: TMS25JPKT

In Stock

Sale - Save 5% $ 46.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.64 USD

Add to Wish List

Qty

Sale - Save 5%

$ 46.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.64 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 2.5" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability U-Bend Centerline Radius - 3.50" @ 180° angle Leg Length "A" - 5.0" Leg Length "B" - 5.50" Leg Length "C" - 7.0"

Show More Show Less

OEM Bosch Universal 4-Wire Oxygen Sensor - Priced Each

T#:372884

Part#: 15733

In Stock

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Bosch Universal Oxygen Sensors are perfect for replacing faulty sensors throwing off a check engine lights and causing poor operation and low gas mileage. If you are looking for a cheaper option or are unable to get a hold of the sensor you need, you can reuse part of the original wiring harness to connect this high quality replacement.

Show More Show Less

Build-Your-Own Universal Vacuum-Actuated Valved Mufflers - Dual Muffl...

10X Entries Into Our F80 M3 Sweepstakes

T#:21209855

Part#: 044081LA01

In Stock

Sale - Save 12% $ 259.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 227.53 USD

Add to Wish List

Sale - Save 12%

$ 259.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 227.53 USD

Add to Wish List

Choose between a 2.5" or 3.0" valved mufflers to complete your custom exhaust.

BMW Exhaust Manifold Gasket

2X Entries Into Our F80 M3 Sweepstakes

T#:15412459

Part#: 11628600289

Ships in 1 Business Day

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

Replace your exhaust manifold gaskets whenever you replace your manifold to ensure a good seal to prevent any leaks!

Genuine BMW Exhaust manifold gasket - N63 4.4L

T#:36843

Part#: 11627614095

Ships in 1 day

29% off MSRP $ 136.50

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 97.12 USD

Add to Wish List

Qty

29% off MSRP

$ 136.50

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 97.12 USD

Add to Wish List

Genuine BMW Gasket -
This item fits the following BMW Chassis:
E71,F01,F02,F06,F10,F12,F13,F15,F16

Fits BMW Engines including:
N63,N63N

3 Pc. OXygen Sensor Wrench Set

T#:2393414

Part#: CTA2073

In Stock

$ 50.01 USD

Add to Wish List

Qty

$ 50.01 USD

Add to Wish List

Get the complete set.

Universal Exhaust Pipe Reducer - 3" ID To 60mm OD

10X Entries Into Our F80 M3 Sweepstakes

T#:587350

Part#: TMS3060ER1KT

In Stock

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Connect your differently sized exhaust pipes quick and easy with this T304 stainless steel exhaust pipe reducer. PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features a raw finish 3.0" ID (Slip) To 60mm OD (Butt) connections 1.5mm (.060") wall thickness tubing for durability Length on 60mm OD side - 2.25" Length on 3.0" ID side - 3.50"

Show More Show Less

Universal Stainless Steel J-Pipe - 3.0" OD

10X Entries Into Our F80 M3 Sweepstakes

T#:587363

Part#: TMS30JPKT

Back Ordered

Sale - Save 5% $ 53.99

This product was last offered at the strikethrough price on
05-03-2026

$ 51.29 USD

Add to Wish List

Qty

Sale - Save 5%

$ 53.99

This product was last offered at the strikethrough price on
05-03-2026

$ 51.29 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 3.0" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability U-Bend Centerline Radius - 5.0" @ 180° angle Leg Length "A" - 5.0" Leg Length "B" - 9.50" Leg Length "C" - 10.5"

Show More Show Less

Valvetronic Designs Universal Valved Muffler Kit - Single Inlet / Sin...

T#:53149959

Part#: UVM.76MM.X1

Ships in 1 Business Day

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

Unlock the true sound of your engine with the Valvetronic Designs universal valved muffler kit, a premium T304 stainless steel solution that offers the perfect balance between aggressive performance and neighborhood-friendly quiet at the push of a button.

Show More Show Less

OEM Bosch Post-Cat Oxygen Sensor - B46, B48, N74

T#:639157

Part#: 11788631049

Ships in 1 Business Day

$ 154.99

This product was last offered at the strikethrough price on
05-07-2026

$ 142.99 USD

Add to Wish List

Qty

$ 142.99 USD

Add to Wish List

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the longest and best performance for the price. This is the OEM Bosch oxygen sensor for BMWs with B46, B48, and N74 engines. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Universal Magnaflow Muffler

T#:370934

Part#: 14211

Ships in 1 Business Day

$ 174.00 USD

Add to Wish List

Qty

$ 174.00 USD

Add to Wish List

Upgrade your vehicle's muffler affordably with the Magnaflow Universal Muffler, providing a solution to loud exhausts without breaking the bank. Crafted from 100% stainless steel, these mufflers are built to endure extreme conditions, ensuring durability and reliability.

Key Benefits:

100% stainless steel construction for robustness
Lap-joint welding ensures solid build quality
Free-flowing, straight-through design for enhanced performance
Stainless mesh wrap and acoustical fiber fill deliver a smooth, deep tone
Packed tightly for long-lasting performance without sound degradation

Features:

2.5'' Inlet and Outlet
14'' body length
20'' overall length
May require welding/fabricating for fitting; not a direct fit for any specific car model

Show More Show Less

Genuine BMW M Performance Muffler - G30 G32

T#:537224

Part#: 18302431035

In Stock

Sale - Save 20% $ 1,820.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,456.15 USD

Add to Wish List

Qty

Sale - Save 20%

$ 1,820.99

This product was last offered at the strikethrough price on
08-24-2026

$ 1,456.15 USD

Add to Wish List

Dinan Exhaust Valve Remote - Most BMWs 2012+

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:600153

Part#: R660-0001

Ships in 3 Business Days

11% off MSRP $ 358.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 318.99 USD

Add to Wish List

Qty

11% off MSRP

$ 358.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 318.99 USD

Add to Wish List

The Dinan Exhaust Valve Remote lets you override the factory exhaust valve operation and fully open (or close) the valve at the press of a button. Directly compatible with 'F' and 'G' chassis BMW's using a single electronic valve as well as 3rd generation MINI's, the Dinan Exhaust Valve Remote Kit is robust in its potential applications. Once installed simply press the top button of the supplied wireless remote to open the valve fully and enjoy maximum aural pleasure. Alternatively, when the need arises for the exhaust to be as quiet as possible, press the bottom button on the remote and the valve will close. This system works with both the factory exhaust and any aftermarket system that utilizes the factory electronic exhaust valve actuator. Tested and compatible valve actuators include BMW P/N's 18307851568, 18308686640, 18308632154, and 18308623424. Features: Opens the factory electronic exhaust valve with the push of a button. Wirelessly remote controlled. Weatherproof housing. Extra length wiring harnesses for maximum application and routing versatility.

Show More Show Less

Exhaust Clamp

T#:48616

Part#: 18307793766

In Stock

10% off MSRP $ 49.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 44.99 USD

Limited Qty Sale

Add to Wish List

Qty

10% off MSRP

$ 49.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 44.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Muffler Clamp - D=75,9Mm
This item fits the following BMW Chassis:
E70 X5,F06,F12,F13,F15,F16

Fits BMW Engines including:
M57,N57N,N63N

Show More Show Less

Universal Muffler - Priced Each

T#:26005252

Part#: 13215

In Stock

$ 150.00 USD

Add to Wish List

Qty

$ 150.00 USD

Add to Wish List

Upgrade your BMW's performance with MagnaFlow XL Mufflers, engineered to enhance horsepower while reducing unwanted resonance. The innovative design features large diameter perforated tubing and strategically placed sound baffles, creating a balanced sound profile. These mufflers utilize calibrated tuning gate openings to tune sound waves, effectively canceling out harsher noises. With stainless steel construction and a multi-chamber design, they offer optimal performance and a distinct exhaust sound.

Stainless steel construction
Multi-chamber design for increased performance
Chambered muffler performance sound

Show More Show Less

Dinan Free Flow Axle-Back Exhaust - Black Tips - G30 M550

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:598388

Part#: D660-0075-BLK

In Stock

11% off MSRP $ 2,924.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,599.95 USD

Add to Wish List

Qty

11% off MSRP

$ 2,924.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,599.95 USD

Add to Wish List

True to form, Dinan has developed this Free Flow stainless exhaust to increasing flow by reducing backpressure, resulting in more power. Best of all, it has a great tone that is aggressive when you want it to be, but pleasant and civilized under normal driving conditions. This system weighs less than the stock system and is constructed out of stainless steel for the quality and performance you'd expect from your BMW.

Show More Show Less

Downpipe To Cat-Back Reducer - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:22427013

Part#: 006555ECS06B

In Stock

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Upgrade your exhaust system with the Downpipe To Cat-Back Reducer.

Engineered for optimal performance and durability, this reducer allows for seamless connection between your downpipe and cat-back exhaust system. Its high-quality construction ensures a tight seal, reducing exhaust leaks and enhancing overall exhaust flow. With easy installation and compatibility with various exhaust systems, this reducer is a must-have for any performance enthusiast.

Allows for seamless connection between downpipe and cat-back exhaust
High-quality construction for durability
Tight seal reduces exhaust leaks
Enhances overall exhaust flow
Easy installation and compatibility with various exhaust systems

Show More Show Less

3.0" Stainless Steel V-band Assembly - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:587340

Part#: 028092ECS09AKT

In Stock

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

3.0" Stainless Steel V-band Assembly - Priced Each

Elevate your BMW's exhaust system with the 3.0" Stainless Steel V-band Assembly - Priced Each. This top-quality V-band assembly is tailored for BMW vehicles, offering numerous advantages for enhanced exhaust performance and durability. Crafted with precision and durability in mind, it delivers:

Robust stainless steel construction ensures long-lasting reliability
Secure V-band clamp design guarantees a tight seal
Simple installation and removal facilitate maintenance or upgrades
Compatible with 3.0" exhaust systems

Upgrade your BMW's exhaust system with this stainless steel V-band assembly.

Show More Show Less

Genuine BMW Self Tapping Screw

T#:6383

Part#: 07119902368

In Stock

Sale - Save 19% $ 36.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.96 USD

Add to Wish List

Qty

Sale - Save 19%

$ 36.99

This product was last offered at the strikethrough price on
05-02-2026

$ 29.96 USD

Add to Wish List

Genuine BMW Sheet Metal Screw.

Genuine BMW Muffler Clamp

T#:194606

Part#: 18308637404

In Stock

8% off MSRP $ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.99 USD

Add to Wish List

Qty

8% off MSRP

$ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.99 USD

Add to Wish List

Genuine BMW Muffler Clamp - D=85,6Mm
This item fits the following BMW Chassis:
E71,F06,F10,F12,F13,F25 X3,F26 X4

Fits BMW Engines including:
N55

Show More Show Less

Dual Drive Oxygen Sensor Wrench

T#:641698

Part#: LIS12390

Ships in 6 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Tool comes with both 1/2" and 3/8" drive.

Valvetronic Designs Universal Valved Muffler Kit - Single Inlet / Dua...

T#:53149958

Part#: UVM76MMDUALOUTX2

Back Ordered

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

Unlock the true sound of your engine with the Valvetronic Designs universal valved muffler kit, a premium T304 stainless steel solution that offers the perfect balance between aggressive performance and neighborhood-friendly quiet at the push of a button.

Show More Show Less

Valvetronic Designs Universal Valved Muffler Kit - Single Inlet / Sin...

T#:53149956

Part#: UVM.63MM.X2

In Stock

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

Unlock the true sound of your engine with the Valvetronic Designs universal valved muffler kit, a premium T304 stainless steel solution that offers the perfect balance between aggressive performance and neighborhood-friendly quiet at the push of a button.

Show More Show Less

Prosport Fiberglass Exhaust Wrap - Black - 2" x 50'

T#:385018

Part#: HEA-WRAPKIT-BLK

Ships in 10 Business Days

$ 28.00 USD

Add to Wish List

Qty

$ 28.00 USD

Add to Wish List

Constructed of durable, tight-woven fiberglass, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility.

Show More Show Less

Dinan High Flow Middle Exhaust - G30 M550

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:598406

Part#: D660-0080

In Stock

11% off MSRP $ 1,799.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,599.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,799.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,599.99 USD

Add to Wish List

This X-pipe or Midpipe from Dinan replaces the stock center section and is constructed out of stainless steel for the quality and performance you'd expect from your BMW.

Valvetronic Designs Universal Valved Muffler Kit - Single Inlet / Dua...

T#:53149954

Part#: UVM63MMDUALOUTX2

Ships in 1 Business Day

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

Unlock the true sound of your engine with the Valvetronic Designs universal valved muffler kit, a premium T304 stainless steel solution that offers the perfect balance between aggressive performance and neighborhood-friendly quiet at the push of a button.

Show More Show Less

Eisenmann Performance Exhaust with Black Signature Tip Set

T#:584870

Part#: B5459.20904.12

Special Order: No Guaranteed ETA

$ 3,495.00 USD

Add to Wish List

Qty

$ 3,495.00 USD

Add to Wish List

Maximize power, performance, and style.

CTS Turbo Catted Downpipe - All 1/2/3/4/5/6/7 Series B58

T#:589514

Part#: CTSEXHDP0024CAT

Ships in 7 Business Days

$ 459.99 USD

Add to Wish List

Qty

$ 459.99 USD

Add to Wish List

Maximizes exhaust flow for uncompromising performance.

Prosport Fiberglass Exhaust Wrap - White - 2" x 50'

T#:385017

Part#: HEA-WRAPKIT-WHT

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Constructed of durable, tight-woven fiberglass, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility.

Show More Show Less

Evolution Racewerks High Flow Catted Downpipe - B58

T#:558983

Part#: BMEXH018C

Ships in 8 Business Days

Starting at $ 945.00 USD

Add to Wish List

Starting at $ 945.00 USD

Add to Wish List

Want to install a downpipe on your B58 equipped BMW, but still need to pass emissions? Evolution Racewerks has the answer for you with their B58 Catted downpipe. The Evolution Racewerks Competition Series Catless Downpipes is constructed from 304 stainless steel, featuring mandrel bent piping. These are 100% TIG welded by in house fabricators and built in the USA!

The factory turbocharger turbine housing utilizes a V-Band flange which has been duplicated and CNC machined cut out of billet 304 stainless steel. Stainless Steel CNC machined O2 sensor and laser cut brackets are TIG welded using stainless steel rods. The O2 sensor remains positioned at the factory location. Also, since Evolution Racewerks uses a larger 4.5" pipe right after the turbocharger, turbo backpressure is significantly reduced, resulting in less exhaust turbulence and backpressure which again improves throttle response and decreasing turbo lag.

Show More Show Less

Genuine BMW Post-Cat Oxygen Sensor - B46, B48, N74

T#:535001

Part#: 11788631049

Ships in 1 day

13% off MSRP $ 325.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 281.99 USD

Add to Wish List

Qty

13% off MSRP

$ 325.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 281.99 USD

Add to Wish List

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. This is the OEM oxygen sensor for BMWs with B46, B48, and N74 engines. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less