BMW Intake Parts for BMW 5 Series G30 (2017+)

Burger Motorsports B46/B48 Billet Performance Intake System - Blue Fi...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:556809

Part#: BMS-G-INT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

This plug-and-play air intake system unlocks up to 8whp to the wheels from your B46/B48/B58 BMW engine. In addition to the extra power throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for strength and a clean look. Includes a reusable high-flow inverted cone filter. The OEM cold air intake tube and insulating base remain fully functional. Installation takes only minutes and is fully reversible.

Show More Show Less

BMW B46 B48 B58 Mass Air Flow Sensor

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:5135627

Part#: 0280218324

In Stock at Vendor

$ 197.99

This product was last offered at the strikethrough price on
03-16-2026

$ 191.99 USD

Add to Wish List

Qty

$ 191.99 USD

Add to Wish List

BMW B46 B48 B58 Mass Air Flow Sensor is essential for optimal engine performance and efficiency. This sensor regulates the amount of fuel delivered to the injectors based on the volume of air entering the intake. A malfunctioning or poorly maintained MAF sensor can lead to decreased engine performance and reduced fuel efficiency. For reliable performance and precise fuel management, replacing a faulty MAF sensor with a high-quality unit from Turner Motorsport is crucial.

Optimal fuel management: Regulates fuel delivery based on air volume for efficient engine operation.
Enhanced performance: Ensures the engine runs smoothly, maximizing power and responsiveness.
Improved fuel efficiency: Helps maintain proper fuel consumption for better gas mileage.
High-quality construction: Designed to meet or exceed OEM standards for reliable performance.
Direct replacement: Perfect fit for BMW B46, B48, and B58 engines.

Show More Show Less

BMS Aluminum Charge Pipe Upgrade - BMW B46/B48 (Gen1 & Gen2) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51848519

Part#: G12B48CP

In Stock

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

The BMS Gen 1 B48 charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It is completed with a black textured finish to coordinate with the engine bay and boasts two 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware.

Show More Show Less

BMS Elite Charge Pipe - BMW Gen2 B58 3.0L (B58TU / B58C / B58D) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21209828

Part#: B58G2CP

Back Ordered

Starting at $ 299.00 USD

Add to Wish List

Starting at $ 299.00 USD

Add to Wish List

Replace the failure prone plastic charge pipe that came on your car before it leaves you stranded! The BMS Elite B58TU charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It features a glossy black powder coat to coordinate with the engine bay and includes three 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. With a double o-ring seal design on the chargepipe flange that attaches to the turbo, this chargepipe is designed to withstand up to 40+psi of high boost. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware. Now available with or without a Turbosmart Raceport BOV! The blow-off valve version releases excess pressure in the charge pipes when letting off the gas. In addition to intoxicating sound, it reduces compressor surge and improves overall reliability at higher boost levels. Compatible with factory tuning, JB4, and flash tuning. What's Included with the NON-BOV kit ES4715295: (see below for BOV kit) (1) Upper charge pipe (1) Lower charge pipe (1) 3R2.5 silicone coupler (1) 2.5" Tbolt clamp (1) 3" Tbolt clamp (3) 1/8NPT plugs (1) M6x1x16mm bolt (2) M6x1x20mm bolts (2) Small O rings (1) Large O ring What's Included with the BOV kit ES4715315: (1) Turbosmart Blow-Off Valve (1) Lower charge pipe (1) Upper charge pipe with BOV flange (1) 3R2.5 silicone coupler (1) 2.5" Tbolt clamp (1) 3" Tbolt clamp (5) 1/8NPT plugs (1) M6x1x16mm bolt (2) M6x1x20mm bolts (2) Small O rings (1) Large O ring (1) BOV adapter + E clip (2) 90* 1/8NPT to 1/4" push lock fittings (1) 30" 1/4" tubing

Show More Show Less

Burger Motorsports Aluminum Charge Pipe Upgrade with TurboSmart BOV &...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27171969

Part#: B58-ACP-TSBOV

In Stock

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

Upgrade your OEM Gen1 B58 BMW charge pipe with our durable aluminum replacement, designed to prevent charge pipe failure.

Crafted from high-quality aluminum with a glossy black powder coat finish, this replacement charge pipe boasts CNC machined flanges, optional 1/8" NPT methanol bungs, and OEM-style mounting hardware for a seamless fit. It also features a vent-to-atmosphere blow-off valve flange for enhanced integration and performance.

The kit includes:

BMS Elite Aluminum Charge Pipe TurboSmart Race-Port BOV (3) 1/8" NPT Bung Plugs with Thread Sealer (1) 3" to 2.5" Silicone Reducer Coupler (2) 1/8" NPT to 1/4" Push-lock Fittings (1) 1/4" Push Tube Line (1) B58 Boost Tap Adapter Associated Hardware (Clamps, O-rings, Screws)

Show More Show Less

BMS BMW Billet Port Injection Manifold - Gen 1 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38655164

Part#: BMS-BPIM-G1B58

Ships on Jul 27, 2026

$ 2,299.00 USD

Add to Wish List

Qty

$ 2,299.00 USD

Add to Wish List

Upgrade your factory plastic B58 intake manifold to the high-flow, high-strength aluminum Burger Motorsports Intake Manifold. Engineered for direct fitment, this precision-designed upgrade enhances durability, improves airflow, and supports high-performance builds. Key Features & Benefits: Increased airflow for improved performance Precision-machined aluminum—stronger and more durable than stock Integrated top-mount port injection bungs for optimal injector spray pattern 1/8" expansion vacuum ports—ideal for boost gauges, BOV references, or Hobbs switches Lightweight design with all factory connections for seamless installation Includes high-quality O-rings and all necessary hardware Compatible with your factory intercooler core Optional Port Injection & Fueling Upgrades Available with or without port injection hardware, including calibrated Bosch EV14 42mm fuel injectors and a plug-and-play fuel line: 550cc injectors—ideal for setups under 700whp 750cc injectors—recommended for 700-800whp builds 950cc injectors—for higher-power applications FREE $99 BMS B58 Phenolic Thermal Intake Manifold Spacer Included in the kit, this fiber-embedded phenolic spacer reduces heat transfer from the cylinder head to the intake manifold, resulting in lower intake air temperatures, denser air, and improved combustion efficiency. 🔥 Upgrade your B58 intake system today for superior strength, airflow, and performance! 🔥

Show More Show Less

BMS Silicone Intake Pipe Hose Upgrade - BMW G30 G11/12 G14/15/16 G01/...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46993584

Part#: BMSGSIPU

Ships on Jul 27, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

The Burger Motorsports silicone intake pipe upgrade for the B58 BMW smooths the airflow from the intake to the factory turbo inlet by removing the bulky upper factory sound resonator and the lower accordion section of the air inlet pipe.

Show More Show Less

BMS Drop-In Performance Air Filter - B48/B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38857248

Part#: BMSIDIPAFB4858

Back Ordered

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

The Burger Motorsports Performance B48/B58 G-Chassis BMW Drop-In Air Filter outperforms OE quality with its layered, oiled cotton media, engineered for maximum airflow, effective contaminant filtration, and increased horsepower. This washable, reusable filter is designed to last the lifetime of your vehicle, providing a cost-effective, high-performance upgrade. With a quick and easy installation, it fits directly into the factory airbox for a seamless upgrade. Replaces OEM BMW Air Filter Part #13718577170

Show More Show Less

BMS Drop-In Performance Air Filter - B48/58 G Chassis

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38621411

Part#: BMW-DIPAF-B4858

Ships on Jul 27, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

The Burger Motorsports Performance B48/B58 G-Chassis BMW Drop-In Air Filter exceeds OE quality, utilizing layered, oiled cotton media for optimal airflow, effective contaminant filtration, and increased horsepower. This high-performance filter is washable, reusable, and designed to last the lifetime of your vehicle. With a simple drop-in installation, it seamlessly fits into your factory airbox. Replaces OEM BMW air filter part number: 13718577170.

Show More Show Less

Burger Motorsports B46/B48 Billet Performance Intake System - Red Fil...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46993583

Part#: BMS-G-INT-R

Ships on Jul 27, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

This plug-and-play air intake system unlocks up to 8whp to the wheels from your B46/B48/B58 BMW engine. In addition to the extra power throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for strength and a clean look. Includes a reusable high-flow inverted cone filter. The OEM cold air intake tube and insulating base remain fully functional. Installation takes only minutes and is fully reversible.

Show More Show Less

BMS Silicone Front Mount Cold Air Intake - Red Filter - BMW G2X G42 G...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46959270

Part#: B58GFMCAI-R

Ships on Jul 27, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

The Burger Motorsports Silicone Front Mount B58 air intake system unlocks up to 8+whp to the wheels from your Gen2 B58 engine. In addition to the extra power, throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for a clean look, and includes a reusable BMS high-flow inverted cone filter. Filters are available in red or blue.

Show More Show Less

BMW 5bar Sensor - B58/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49822565

Part#: BMSB585BS

Ships on Jul 27, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Compatible with BMW B58 and S58 engines Accurate, reliable, and plug-and-play — the B58/S58 5-Bar TMAP Sensor ensures your engine sees the full boost picture, giving your tune the confidence it needs to perform safely and consistently.

Show More Show Less

BMS Aluminum Charge Pipe Upgrade w/ Blow-Off Valve Kit - BMW B46/B48 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51883658

Part#: G1B48CPBOV

In Stock

$ 629.00 USD

Add to Wish List

Qty

$ 629.00 USD

Add to Wish List

Engineered as a direct replacement for OEM BMW Part #13718601683, the BMS Elite charge pipe addresses the structural weaknesses of the factory charge air duct. Utilizing high-gauge aluminum and precision CNC-machined throttle body and turbo flanges, this upgrade eliminates the risk of boost leaks and pipe failure common at higher boost levels.

Show More Show Less

BMS Silicone Front Mount Cold Air Intake - Blue Filter - BMW G2X G42 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46959269

Part#: B58GFMCAI-B

Ships on Jul 27, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

The Burger Motorsports Silicone Front Mount B58 air intake system unlocks up to 8+whp to the wheels from your Gen2 B58 engine. In addition to the extra power, throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for a clean look, and includes a reusable BMS high-flow inverted cone filter. Filters are available in red or blue.

Show More Show Less

BMS Gen 1 B58 BMW Aluminum Port Injection Manifold

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27171924

Part#: BMSB58G1-PRM

Ships in 8 Business Days

Starting at $ 3,158.00 USD

Add to Wish List

Starting at $ 3,158.00 USD

Add to Wish List

Add more fuel via port Injection while increasing airflow in your Gen 1 B58 Powered BMW When it comes to intake manifolds it doesn't get any better than this. The Burger Motorsports intake manifold replaces your weak factory plastic B58 manifold with a direct fit high flow high strength aluminum manifold. Features port injection bungs located on the top of the manifold for easy access and optimal injector spray pattern, and 1/8" expansion vacuum ports perfect for gauges, BOV references, or Hobbs switches. Includes high-quality o-rings and all required hardware. Your factory high-quality intercooler core slides right in. Available with required port injection hardware (calibrated injectors with plug-and-play fuel line), or ala-cart without the extra fueling hardware. The optional high-quality Bosch EV14 42mm fuel injectors are offered in 550cc, 750cc, and 950cc options. For most 700-800whp applications we suggest the 750cc injectors, while the 550cc injectors are suitable for applications below 700whp. This kit includes a FREE $99.00 Burger Motorsports B58 Phenolic Thermal Intake Manifold Spacer FEATURES AND BENEFITS Increased flow Integrated top mount port injection bungs Much stronger than stock Looks amazing under the hood Lightweight aluminum construction All factory connections Extra ports for a BOV, Hobb's switch, or boost gauge Includes upgraded high-temperature o-rings Optional Motiv Reflex + Injector Controller Optional Injector Block Off Plugs Optional Deasthwerks 1000cc Injectors

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558165

Part#: 1G-MT-CL

Ships in 3 Business Days

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

B58 Billet Water Injection Spacer - Gen1 B58 (B58A)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:15744064

Part#: GEN1B58WIS

Ships on Jul 27, 2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Plug-and-play water injection adapter for all Gen1 B58 BMW motors Normally you'd replace the factory charge pipe to install a water/meth kit but in the case of the B58 engine, the factory charge pipe is very sturdy and difficult to remove. So we've designed this plug-and-play adapter for quick installation and removal of BMS dual nozzle water/meth kits without having to replace the factory charge pipe. Simply unscrew three bolts, insert the CNC machined adapter with integrated o-ring in place, and tighten the included longer length bolts, to allow mounting of two meth nozzles with a perfect seal. Includes dual 1/8" NPT methanol bungs appropriately machined for a clean spray pattern which is critical for proper atomization with the B58 motor. For most B58 water/meth applications we suggest dual CM5 nozzles. What's Included: (Gen 1 B58) (1) Billet Spacer (3) M6x1.0x50mm bolts (2) 1/8 NPT bung plugs (2) 90º nozzle adapters

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558163

Part#: BMS-WMI

Ships on Jul 27, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Jul 27, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Water/Methanol Injection Hose - 20'

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Billet Water/Methanol Injection (WMI) Spacer - Gen 2 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20782258

Part#: BMSB58WMISPG2

Ships on Jul 27, 2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Normally you'd replace the factory charge pipe to install a water/methanol kit but in the case of the B58 engine, the factory charge pipe is very sturdy and difficult to remove. So we've designed this plug and play adapter for quick installation and removal of BMS dual nozzle water/meth kits without having to replace the factory charge pipe. Simply unscrew three bolts, insert the CNC machined adapter with integrated o-ring in place, and tighten the included longer length bolts, to allow mounting of two meth nozzles with a perfect seal. Includes dual 1/8" NPT methanol bungs appropriately machined for a clean spray pattern which is critical for proper atomization with the B58 motor. For most B58 water/methanol applications we suggest dual CM5 nozzles.

Show More Show Less

WMI Inline Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176933

Part#: BMS-WMI-FIL

Ships on Jul 27, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176934

Part#: BMS-WMI-SOL

Ships on Jul 27, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

Super Atomizing Water/Methanol Injection Nozzles

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815192

Part#: BMS.SA.WMI.NOZ

Ships on Aug 7, 2026

Starting at $ 40.00 USD

Add to Wish List

Starting at $ 40.00 USD

Add to Wish List

With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW 5 Series G30 (2017+)

Sub-Categories

Burger Motorsports B46/B48 Billet Performance Intake System - Blue Fi...

BMW B46 B48 B58 Mass Air Flow Sensor

BMS Aluminum Charge Pipe Upgrade - BMW B46/B48 (Gen1 & Gen2) ...

BMS Elite Charge Pipe - BMW Gen2 B58 3.0L (B58TU / B58C / B58D) ...

Burger Motorsports Aluminum Charge Pipe Upgrade with TurboSmart BOV &...

BMS BMW Billet Port Injection Manifold - Gen 1 B58

BMS Silicone Intake Pipe Hose Upgrade - BMW G30 G11/12 G14/15/16 G01/...

BMS Drop-In Performance Air Filter - B48/B58

BMS Drop-In Performance Air Filter - B48/58 G Chassis

Burger Motorsports B46/B48 Billet Performance Intake System - Red Fil...

BMS Silicone Front Mount Cold Air Intake - Red Filter - BMW G2X G42 G...

BMW 5bar Sensor - B58/S58

BMS Aluminum Charge Pipe Upgrade w/ Blow-Off Valve Kit - BMW B46/B48 ...

BMS Silicone Front Mount Cold Air Intake - Blue Filter - BMW G2X G42 ...

BMS Gen 1 B58 BMW Aluminum Port Injection Manifold

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

1 Gallon Methanol Tank - Clear/White

BMS DDP5800 Water/Methanol Injection Pump

2 Gallon Low Profile Universal Methanol Tank

B58 Billet Water Injection Spacer - Gen1 B58 (B58A)

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

1.25 Gallon Heavy-Duty Universal Methanol Tank

Water/Methanol Injection Hose - 20'

Billet Water/Methanol Injection (WMI) Spacer - Gen 2 B58

WMI Inline Filter

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

Super Atomizing Water/Methanol Injection Nozzles

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results