Please ensure your correct model is selected
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.
To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.
Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.
Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.
Key Features:
Cast aluminum construction offers superior strength and resilience over the OE plastic pan
Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating
Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance
Hard coat anodized finish provides exceptional corrosion resistance and longevity
Integrated magnets collect metallic debris, protecting transmission internals
Installation:
Vehicle plastic belly pans may vary. Because the Turner 8HP transmission pan is taller to allow for increased fluid capacity, some vehicles may require trimming of the plastic belly pan, or the belly pan may need to be installed over the transmission pan where it may make contact.
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.
To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.
Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.
Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.
Key Features:
Cast aluminum construction offers superior strength and resilience over the OE plastic pan
Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating
Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance
Hard coat anodized finish provides exceptional corrosion resistance and longevity
Integrated magnets collect metallic debris, protecting transmission internals
Kit Includes:
Turner Motorsport ZF 8HP High-Capacity Aluminum Transmission Pan
OE Hengst G8X Filter Installation Kit
Installation:
Vehicle plastic belly pans may vary. Because the Turner 8HP transmission pan is taller to allow for increased fluid capacity, some vehicles may require trimming of the plastic belly pan, or the belly pan may need to be installed over the transmission pan where it may make contact.
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
Enhance rear-end control and put more power to the ground with a straightforward 3-piece design that installs with ease. The factory rubber may favor ride comfort, but it struggles to keep up when driving gets aggressive. As it wears, the OEM bushing can soften and deform, reducing stability and allowing wheel hop to creep in when you need traction most.
Our 95A durometer polyurethane bushings solve that problem. Engineered to strike the perfect balance between soft factory rubber and harsh solid mounts, they significantly reduce differential movement without introducing excessive vibration. The result is more efficient power transfer, so your torque goes straight to the rear wheels instead of being lost in drivetrain flex.
Features & Benefits:
Minimizes differential movement and instability to help eliminate wheel hop
Two-piece 95A split polyurethane design for easier installation
Precision-fit insert reinforces the bushing and strengthens mounting points
Resistant to road salt, oils, and harsh chemicals
Compatible with dual mount differential plates
Design:
Type II Anodized 6061-T6 CNC billet aluminum inserts for superior corrosion resistance and durability.
95A Polyurethane 2-Piece Isolator.
Product Development:
Our Rear Differential Bushings are designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.
Genuine BMW hex bolt. M12X1,5X28
Be sure to replace your hardware with any flywheel removal service such as the rear main seal or clutch and flywheel.
This product was last offered at the strikethrough price on
11-07-2026
This product was last offered at the strikethrough price on
11-07-2026
Servicing your rear differential at regular intervals is important to ensure you maintain both performance and a long lifespan. Over time, the differential fluid can break down, lose its lubricating properties, and become contaminated with metal shavings and debris. Regularly replacing the fluid ensures that the gears and limited slip differential clutch packs are adequately lubricated, reducing wear and tear. Regular maintenance also helps identify potential issues before they become major problems.
This kit includes Genuine BMW differential fluid designed specifically for your M Sport differential and a brand new fill plug. The factory plugs include a rubberized seal that compresses over time and may not seal properly when reused.
One unique aspect of performing this service is the removal of the lower differential temperature sensor. Unlike many typical BMW differentials, this differential does not use a traditional drain plug and instead uses the temperature sensor as a drain plug. This sensor is removed to drain the differential fluid and is replaced before refilling. If you'd like to replace this sensor as well (not included in this kit), please see our recommended items or search BMW part number 33107847469.
NOTE: This kit includes 3 500ml bottles of diff fluid. BMW claims that only 1 Liter of fluid is necessary, but we found that 2 500ml bottles were insufficient. The third bottle included also allows for a minor flush of the old differential fluid before refilling.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
10-27-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-03-2026
This product was last offered at the strikethrough price on
11-10-2026
Designed to absorb driveline vibrations and isolate the cabin from noise, vibration, and harshness (NVH), OE drivetrain mounts feature rubber inserts. While these inserts provide excellent sound and vibration absorption, they tend to deteriorate as your vehicle ages.
Fortunately, the enthusiasts at Turner Motorsport have created an all-inclusive kit for replacing all three drivetrain mounts and associated hardware.
This kit includes:
Engine Mount - Left Engine Mount - Right Transmission Mount Hex Bolts Torx Bolts Star Socket Screws Refer to the kit contents tab for part numbers and position information.
If you're seeking a high-quality, comprehensive kit to service all drivetrain mounts, look no further than this Genuine BMW service kit from Turner Motorsport.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
BMW's latest iteration of Limited Slip Differentials features a design utilizing clutch packs that are engaged and disengaged by an electric motor. As the electric motor activates, a set of gears adjusts a pressure plate which compresses these clutch packs. As these clutch plates are compressed, the amount of "lock-up" increases, allowing for a range of wide range of engagement, from completely open to almost fully locked. This ensures your BMW is able to transfer power to the ground regardless of the conditions for optimal performance and handling.
If you've noticed excess tire slippage in wet or snowy conditions, there is a chance this electric actuator motor has begun to fail and will need to be replaced to restore your M Sport differential's functionality. This kit includes all of the basic components necessary to replace this motor.
Referred to by BMW as an Actuator, Position Sensor, and Set Positioning Motor
Experience unparalleled performance with Red Line CV-2 Grease, expertly crafted to endure extreme temperatures and pressures found in high-performance wheel bearings and CV-joints. This premium grease surpasses both conventional and synthetic options with its exceptional high-temperature stability, superior extreme-pressure protection, and water resistance. Operating effectively in temperatures spanning from -100°F to 500°F, it offers outstanding oxidation and corrosion resistance, minimal evaporation and oil separation, and has minimal impact on rubber seals. Expect a remarkable 200% to 800% increase in bearing life due to the exceptional extreme-pressure performance and synthetic oil fluidity. Its red moly compound outshines black moly disulfide lubricants, ensuring superior lubrication.
Red Line CV-2 Grease finds application not only in automotive settings but also in industrial environments. It excels in high-temperature alternator bearings, high-speed ball bearings, conveyor bearings, worm gear drives, servo mechanisms, and other scenarios prone to fretting wear and corrosion. Its consistency and extreme-pressure performance endure high-temperature and high-shear conditions, extending the performance life of lubricated components. Despite darkening after high-temperature use, its efficacy remains unaffected. While compatible with some petroleum-based greases, it's recommended to clean out old grease thoroughly for optimal lubrication performance and to avoid grease incompatibility.
