BMW G80 M3 S58 3.0L

VTT “OBD-LOCK” ODB Port Locking Tool

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced After 1995

T#:26938503

Part#: VTT-OBD-LOCK

In Stock

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

VTT is proud to offer our “OBD-LOCK” OBD port locking tool. This is tool is made from billet 6061-T6 aluminum and is designed to completely lock out your OBD port from being accessed. This is useful for people who do not want dealers, techs, etc from accessing their OBD port, and possibly changing a tune, etc. This is also perfect for anti-theft prevention as it will not allow a would-be thief to hook up to the car’s OBD port, duplicate a key, etc. The OBD-LOCK cannot be removed without physically destroying the OBD port if you do not have the proper tools. VTT uses 5 types of screw head designs for every 200 OBD-LOCKS made. This means that worldwide only 40 OBD-LOCKS are using the same head design. For each batch of 200, we redesign the screw heads meaning every batch of 200 OBD-LOCKS will use different screw heads and tools. Each OBD-LOCK sent has its head design chosen at random. After Extensive testing, we have found that our OBD lock fits EVERY SINGLE OBD port we have tried, this means it will fit every single OBD port currently on the market from a high-end BMW to a Ford F150 diesel.

Show More Show Less

VTT Billet Coolant Reservoir Cap - Anodized Blue - Most BMWs 2006+ (E...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7530036

Part#: COOLANTCAPBLUE

In Stock

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

VTT Billet Coolant Reservoir Cap - Anodized Red - Most BMWs 2006+ (E/...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7530034

Part#: COOLANTCAPRED

In Stock

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

Active Autowerke Downpipe With Gesi Cat - G80/G82/G87 - M2/M3/M4 S58 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5886937

Part#: 11-085

Ships in 3 Business Days

$ 2,849.99 USD

Add to Wish List

Qty

$ 2,849.99 USD

Add to Wish List

Active Autowerke is proud to release the advanced Active Autowerke Signature Catted Downpipes with GESI G-Sport cats for the BMW G80 M3 and G82 M4. While these cars have received rave reviews for their performance, the sound is a muffled one leaving the driver to wonder if they are really driving a BMW M-car. In order to solve this, Active Autowerke has created a full exhaust system for the G80/G82 which comprises this mid-pipe, a rear axle-back valved exhaust and a set of GESI catted downpipes. Together, this remake of the stock exhaust results in a G80/G82 with an amazing sound. You will feel like you are driving a true M-car again. This variant includes a pair of 4.5" ultra high flow GESI catalytic converters that will NOT produce a CEL. The GESi G-Sport Ultra High Output Catalytic Converter features full 304 stainless steel construction, including the substrate. GESi UHO-Series Catalytic Converters are EPA registered and compliant in 49 states and fully OBD2 compliant, perfect for use on 1996 and newer vehicles. GESi proprietary precious metal loading technology ensures greatly reduced emissions, eliminating most "Check Engine Lights". These high flow catalytic converters outperform stock converters and provide a reliable solution to the most common catalytic converter problems. FEATURES: NO CEL when using these downpipes GESI EPA registered high flow and fully OBD2 compliant The most advanced cats produced by GESI today Casted upper stainless steel V-Band for precise fitment 4.50" diameter piping allows for maximum power output Quicker turbo spool Rated for 500 to 850 hp applications per cat Withstands up to 1500 F Can reach operational efficiency within 9 seconds of startup Easily bolts-on 2013 no cutting or welding required Durable construction from TIG welded 304 stainless steel Precise fitment Ultra high flow 400 cell per square inch catalyst EPA compliant for use on OBD2 vehicles (1996 and newer) except in California 304 stainless steel substrate is furnace braised to the mantle for outstanding durability GESI proprietary precious metal loading technology ensures greatly reduced emissions Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise Covered by 5 Year / 50,000 Mile Warranty (on catalytic converter) Made in Miami, Florida

Show More Show Less

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49822557

Part#: VTTBS58BLOCK

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

BMW F8X G8X Exhaust Valve Cable Extender

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22295072

Part#: 11-074G

Ships in 3 Business Days

$ 85.00 USD

Add to Wish List

Qty

$ 85.00 USD

Add to Wish List

BMW F8X G8X Exhaust Valve Cable Extender from Turner Motorsport is essential for upgrading your BMW's exhaust system, particularly if you're experiencing issues with stock cable lengths. This extender ensures a proper connection for rear exhaust systems that may have shorter cables.

Model Compatibility: Designed for BMW models F80, F82, F87, G80, G82, G87, and F97.
Proper Fit: Ensures a correct fit for rear exhaust systems, preventing any issues with cable length.
Available Lengths: Offered in 12-inch and 24-inch options to suit different needs.
Custom Lengths: Custom lengths available upon request for a tailored solution.
High-Quality Construction: Built to maintain the reliability and performance of your BMW’s exhaust system.

Show More Show Less

VTT M14 Titanium Wheel Stud Kits

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7292018

Part#: TISTUD201425

Back Ordered

Starting at $ 335.99 USD

Add to Wish List

Starting at $ 335.99 USD

Add to Wish List

VTT is proud to offer Titanium wheel stud kits for the vehicle owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. VTT kit details are as follows: Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength Grade 5 Titanium nuts with 60-degree cone seat to fit most all aftermarket wheel applications M5 Hex for easy installation Three Colors Available – Raw, Black, Burnt M14x1.25x75mm on the small end to M14x1.5 on the long end. This will convert M14x1.25 cars into M14x1.5 pattern Installation notes: Apply locktite to the studs (short end) and torque to 20 ft/lb. Lug nuts should be torqued to factory specifications. For safety retorque all hardware (studs and nuts) after 25-50 miles.

Show More Show Less

VTT Billet Engine Stand Plate - B58/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:10128424

Part#: VTT-ENGPLT-V2

Back Ordered

Starting at $ 112.99 USD

Add to Wish List

Starting at $ 112.99 USD

Add to Wish List

Do you work on a lot of BMW engines from various platforms? Tired of having to adjust universal engine stand plates to fit your engine? Hate not having access to the flywheel end with the engine on the stand? Vargas answered yes to all of those things and made a tool for anyone that works on BMWs often, and wanted a strong bolt-on engine stand plate that keeps the flywheel end of the engine open! The engine stand plates are machined from a solid billet of 6061-T6 aluminum and anodized in 5 colors for long-lasting corrosion resistance. These are lightweight, and rated for over 1200 lbs!

Show More Show Less

VTT Billet Coolant Reservoir Cap - Anodized Clear - Most BMWs 2006+ (...

This coolant cap retains ALL of the factory provisions by simply allowing you to snap t...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7530035

Part#: COOLANTCAPRAW

Ships in 3 Business Days

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

Vargas S58 One Way Crankcase Breather - BMW S58 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:697896

Part#: VTT-S58-BREATHER

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW S58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all S58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter NOTE: NOT ALL THE S58 MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES AND WHICH WILL NOT AS WE HAVE NOT TESTED FIT ON ALL MODELS. PLEASE TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE. IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

Show More Show Less

VTT Plug And Play Billet S58 Throttle Body Coolant Delete Kit ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26971821

Part#: VTT-S58-TB-COOLA

Ships in 10 Business Days

$ 114.99 USD

Add to Wish List

Qty

$ 114.99 USD

Add to Wish List

Heat is the enemy of power, and the last thing you want is hot coolant heating your charge air even further right before it enters the charge cooler, but this is what BMW has done on the S58. This is done for emissions and quick warm-up purposes. However, If you are looking to make power on the S58, and are upgrading your charge cooler, or adding PI. While you are there, it takes 30 seconds to remove the coolant lines from the TB connections and replace them with our billet coolant delete kit. This completely removes the coolant from the Throttle body and provides a bypass for the coolant. Simply remove the two lines going to the throttle body, and run our hose in their place. You leave the coolant fittings on the TB open and avoid any unwanted heat being introduced into your charge tract. In our opinion a must for full effort builds. We take the work out of it for you. Kit included: One Plug and Play TB Coolant Delete Hose Kit Features: Billet 6061 Anodized coolant fittings for long leak-free life Reinforced 7-ply silicone hose for strength and longevity Vibration-resistant crimp clamps 100% plug and play, NO cutting or removing factory clamps or hoses. Fully reversible

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 3 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

VTT S58 Turbocharger Install Kit - BMW S58 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49023067

Part#: VTT-S58-INSTL

Ships in 10 Business Days

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

Everything needed for a successful install without having to make a trip to the dealer

High Performance Drop-In Air Filter Upgrade - Black - S58 G80, G82, G...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5802145

Part#: VTT-S58-FILTER-B

In Stock

$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.99 USD

Limited Qty Sale

Add to Wish List

Features: 50 States Emissions Legal Easy to install 15-30 minutes even for a novice Filters can be cleaned forever meaning never buy new filters Up to 13WHP gains Completely reversible if you ever want to remove VTT is proud to offer high-performance drop-in replacement filters for the 2021+ G8X M3/M4. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. On the dyno, VTT saw more than 13WHP gains with these filters and our Carbon Fiber intake Tops. These filters will also work perfectly with the stock tops. We recommend removing the pre-filter for best flow if the stock top is used. Black.

Show More Show Less

Active Autowerke Signature Trunk Emblem

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

VTT G8X Carbon Fiber Strut Braces - Anodized Ends

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26938445

Part#: VTT-G8X-CAR-STR

Ships in 10 Business Days

Starting at $ 776.99 USD

Add to Wish List

Starting at $ 776.99 USD

Add to Wish List

We took our popular Billet G8X strut bars and redesigned them to use genuine forged carbon fiber centers. No metal with ugly carbon overlay. This is a real carbon fiber strut bar with ends that are CNC machined from 6061-T6 aluminum, and anodized in Black, Red, or Clear.

Show More Show Less

T#:5886946

Part#: G8XAXLBCKSTBRU

Ships in 3 Business Days

$ 2,374.99 USD

Add to Wish List

Qty

$ 2,374.99 USD

Add to Wish List

The Active Autowerke G80/G82 rear exhaust was carefully engineered to increase the sound level over the factory M3 and M4 exhaust, while also allowing for optimum flow and resonance by reusing the actuators from the BMW valves. Every effort was made in addressing the overly quiet sound of the stock OEM exhaust while designing an exhaust worthy for an "M" car. We believe our rear exhaust combined with our mid-pipe and catted downpipes offers the best combination of sound and performance versus any other system on the market today. Available for both models, this axle-back exhaust gives your BMW the deep, throaty, growl a car of its caliber should have had from the factory! KEY FEATURES Made in the USA 304 Stainless Steel Low, Deep Sound with stock Valve Control Each exhaust test-fit on our G80/G82 Exhaust Fixture Guaranteed to fit all G80/G82 BMW M3/M4 Includes all necessary installation hardware At Active Autowerke, it's not ONLY about making as much power as possible but to maximize the enjoyment of the drive. For over 40 years, power has been the end result of improved performance due to our relentless desire to develop a refined, quality product. This philosophy behind our performance parts is best represented by the introduction of G80/G82 BMW M3/M4 collection rear exhaust.

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

VTT Billet Coolant Reservoir Cap - Anodized Black - Most BMWs 2006+ (...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7530033

Part#: COOLANTCAPBLK

Back Ordered

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

Vargas Plug And Play S58 Single HPFP Conversion Kit - BMW G8X/F9X S58...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51778123

Part#: VTT-S58-SINGLE-H

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The Vargas Turbo Technologies (VTT) S58 Single HPFP Conversion Kit is a revolutionary solution for high-horsepower BMW G8X and F9X builds.

Active Autowerke Valved Rear Axle-back Exhaust - Carbon Over Black Ch...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:39329315

Part#: 11-086CB

In Stock

2% off MSRP $ 3,039.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,986.00 USD

Limited Qty Sale

Add to Wish List

Qty

2% off MSRP

$ 3,039.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,986.00 USD

Limited Qty Sale

Add to Wish List

Active Autowerke has introduced the Valved Rear Exhaust for the BMW G80 M3 and G82 M4. While these vehicles have received widespread acclaim for their performance, their factory exhaust system produces a subdued sound, leaving drivers questioning whether they are truly experiencing the essence of a BMW M-car. To address this, Active Autowerke has developed a rear axle-back valved exhaust system for the G80/G82. For over 40 years, Active Autowerke has prioritized not only maximizing power output but also enhancing the overall driving experience. Their commitment to performance stems from a relentless pursuit of refining and producing high-quality products. This philosophy is exemplified in the development of the G80/G82 BMW M3/M4 rear exhaust system. The Active Autowerke G80/G82 rear exhaust has been meticulously engineered to enhance the sound profile of the factory M3 and M4 exhaust while optimizing airflow and resonance by integrating the original BMW valve actuators. Significant effort was invested in addressing the muted tone of the OEM system, ensuring that this exhaust delivers a sound befitting an M-car. When combined with Active Autowerke’s mid-pipe and catted downpipes, this system offers an unparalleled blend of sound and performance compared to other options on the market. This axle-back exhaust provides the deep, aggressive growl that a high-performance BMW M-car should have had from the factory.

Show More Show Less

Active Autowerke BMW S58 G80 M3 G82 M4 G87 M2 Downpipes W Aflow CATs ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:39497972

Part#: 11-085A

In Stock

5% off MSRP $ 2,399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,279.00 USD

Add to Wish List

Qty

5% off MSRP

$ 2,399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,279.00 USD

Add to Wish List

For the owner of a flagship G-series M-car, Active Autowerke provides a "no-compromise" performance upgrade that prioritizes both power and daily-driver refinement. These downpipes feature integrated GESI G-Sport catalytic converters, which are EPA-registered and fully OBD2 compliant. Utilizing proprietary precious metal loading, these converters reach operational efficiency within just 9 seconds of startup, drastically reducing emissions and eliminating the pungent exhaust smells common with aftermarket pipes. Designed as a direct bolt-on replacement, this system preserves your car's sophisticated electronics while providing a deep, aggressive V8-like growl that the S58 engine was always meant to have. Key Features: Refined Exhaust Note: Increases the volume and depth of the exhaust tone while maintaining a drone-free cabin. Fast Catalyst Light-Off: Proprietary loading technology ensures emissions systems satisfy factory monitors quickly. Corrosion Resistance: High-grade T304 stainless steel substrate is furnace-braised to the mantle for outstanding durability. Precision Casting: Casted upper flanges provide superior strength compared to standard cut-and-weld alternatives. Warranty Protected: Covered by a 5-year/50,000-mile structural warranty and a 2-year/25,000-mile catalyst core warranty.* Specifications: System Type: Twin Catted Downpipes Weight Reduction: Significantly lighter than the heavy ceramic factory assemblies Flow Rating: Engineered for engines producing up to 850 HP Hardware: Includes lower mounting brackets and precision V-bands Manufacturing: Hand-fabricated in the USA Vehicle Fitment: * 2021+ BMW M3 Sedan (G80) / Competition / xDrive 2021+ BMW M4 Coupe (G82) / Competition / xDrive 2023+ BMW M2 (G87) *Important Note: The catalyst warranty is void if the vehicle is equipped with an "aggressive burble" tune, as excessive backfire can physically degrade the catalyst core over time.

Show More Show Less

VTT “Game Changer” S58 Charge Air Cooler (PI Coated)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:13266409

Part#: VTTS58PICOAT

Ships in 10 Business Days

$ 5,847.99 USD

Add to Wish List

Qty

$ 5,847.99 USD

Add to Wish List

This VTT charge air cooler is perfectly designed to reduce heat soak and increase power and efficiency! This increased airflow lets the engine breathe better and perform under hard and light acceleration. The team at VTT was able to take the limited space given to them by the factory, and add not only a larger more efficient core, but also much better-designed/flowing runners, and end tanks.

Show More Show Less

VTT “Game Changer” S58 Charge Air Cooler (Di Only Raw)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:13266396

Part#: : VTT-S58-CHARGE

Ships in 10 Business Days

$ 5,512.99 USD

Add to Wish List

Qty

$ 5,512.99 USD

Add to Wish List

This VTT charge air cooler is perfectly designed to reduce heat soak and increase power and efficiency! This increased airflow lets the engine breathe better and perform under hard and light acceleration. The team at VTT was able to take the limited space given to them by the factory, and add not only a larger more efficient core, but also much better-designed/flowing runners, and end tanks.

Show More Show Less

VTT Plastic Dragy Holder

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20749254

Part#: VTT-DHPLS

Ships in 10 Business Days

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

These are made from molded plastic for a perfect fit. Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features Stop your Dragy from flying off the dash and having to search for it Position your Dragy in the optimal position for the best satellite coverage VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite The charging port is not blocked and can be accessed with the cover on

Show More Show Less

VTT Carbon Fiber Intake Kit - G80 G82 G83 - S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5802143

Part#: VTT-S58-CARBON-I

Ships in 10 Business Days

$ 881.99 USD

Add to Wish List

Qty

$ 881.99 USD

Add to Wish List

The BMW S58 G8X M3/4 Carbon fiber intakes! BMW did a wonderful job designing these intakes and we have found they are only slightly restrictive at elevated power levels, mostly due to the secondary filter inside, and the factory paper filter. The factory setup is EXTREMELY efficient with only a couple of small changes. With this in mind, VTT decided to just take their cues, and make factory-style carbon fiber intake tops with no secondary filters, and high flow cotton pre-oiled filters. These are 8 layers of 100% carbon not a single layer wrapped over plastic and they are 1.3MM thick with the VTT logo vacuum printed onto the tops, with a UV resistant gloss clear coating. This is not only strong but will resist discoloration for an extended period of time. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. 50 States Emissions Legal Easy to install 15-30 minutes even for a novice Beautiful Carbon Fiber finish really adds class to the S58 engine bay Filters can be cleaned forever meaning never buy new filters Up to 13WHP gains Completely reversible if you ever want to remove

Show More Show Less

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Available for pre-order now!

T#:1996177

Part#: VTT-G8X-STRUT

Ships in 10 Business Days

Starting at $ 661.99 USD

Add to Wish List

Starting at $ 661.99 USD

Add to Wish List

BMW's G80 and G82 M cars are arguably two of the best-built BMW chassis to date, but it does have a few shortcomings. One of the first design weaknesses many people notice right away are the ugly, simplistic front strut brace bars. With the level of detail put into the rest of the M3 and M4, these plain steel bars seem like an afterthought. Vargas Turbo Technologies felt there was major room for improvement and set out to design a new brace kit that is aesthetically pleasing while retaining the strength and fitment of the OE bars. The result is a beautiful, functional 3 piece design with an interlinking "V" bar and center support bar. These Strut Braces are CNC machined from 6061-T6 aluminum and are anodized in Black, Red, or Clear.

Show More Show Less

PFS F97/F98 Drop In Brushless LPFP Upgrade - 1000whp Capable ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26938343

Part#: PFS-LPFP-X3/4M-N

Ships in 10 Business Days

$ 1,763.99 USD

Add to Wish List

Qty

$ 1,763.99 USD

Add to Wish List

PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for the F9X X3/4M. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every single pump is then fully tested on our flow bench to ensure proper function before shipping -you’re going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Brand new build: You keep your old pump, we send you a brand-new PFS bucket

Show More Show Less

VTT “Game Changer” S58 Charge Air Cooler (DI Only Coated) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:13266406

Part#: VTTS58DICOAT

Ships in 10 Business Days

$ 5,637.99 USD

Add to Wish List

Qty

$ 5,637.99 USD

Add to Wish List

This VTT charge air cooler is perfectly designed to reduce heat soak and increase power and efficiency! This increased airflow lets the engine breathe better and perform under hard and light acceleration. The team at VTT was able to take the limited space given to them by the factory, and add not only a larger more efficient core, but also much better-designed/flowing runners, and end tanks

Show More Show Less

Vargas Front Differential Bushing Reinforcement Insert Kit - Front - ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52129733

Part#: G8XDIFFINSFRT

Ships in 10 Business Days

$ 132.99 USD

Add to Wish List

Qty

$ 132.99 USD

Add to Wish List

The Vargas Turbo Technologies Front Diff Reinforcement Kit is a vital upgrade for high-horsepower S58-powered vehicles.

Vargas Billet Oil Cooler Adapter Fittings - BMW G80 M3, G82 M4, G83 M...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51778119

Part#: VTT-G8X-OILCOOLE

Ships in 10 Business Days

$ 109.00 USD

Add to Wish List

Qty

$ 109.00 USD

Add to Wish List

The VTT G8X Billet Oil Cooler Adapter Fittings are the essential building blocks for any custom S58 oiling project.

Vargas Ultimate Lightweight Rear RACE Brake Kit (No Parking Brake) - ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51883701

Part#: VTT-G8XRB-SIL6

Ships in 10 Business Days

$ 1,999.99 USD

Add to Wish List

Qty

$ 1,999.99 USD

Add to Wish List

The VTT G8X BMW Ultimate Lightweight Rear Brake Kit is a game-changer for owners looking to maximize the agility and acceleration of their M-car.

VTT Low-Profile Crankcase Vent Adapter -16ORB - BMW S58, B58TU ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51672705

Part#: VTT-S/B58-LP-CC-

Ships in 10 Business Days

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

The VTT Low-Profile Crankcase Vent Adapter is the definitive solution for high-boost BMW builds where hood clearance is a premium.

Vargas Port Injector Block Off Blanks - BMW G8X F9X S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52164927

Part#: S58PIBLOBLANKS

Ships in 10 Business Days

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

The PFS S58 Port Injection Block-Off Kit offers a robust and reliable way to seal secondary fuel ports in the S58 intake manifold.

Vargas Plug & Play Coolant Pressure Sensor Kit - BMW G8X M2, M3, M4 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52164906

Part#: S58CLPRESCK

Ships in 10 Business Days

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Protect your investment with the Vargas Turbo Technologies S58 Coolant Pressure Sensor Kit.

Active Autowerke OEM Exhaust Tips(Brushed) - G8x

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285666

Part#: 11-098

Ships in 3 Business Days

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

Refined styling meets industrial durability with the Active Autowerke G8X 100mm Exhaust Tips. Constructed from TIG-welded 304 stainless steel, these tips are built to survive the extreme thermal cycles associated with the high-output S58 twin-turbo platform. Designed specifically for the Active Autowerke valved rear exhaust, these tips provide a direct-fit solution that enhances the rear stance of the G87 M2, G80 M3, and G82 M4. With a focus on long-term maintenance and ease of cleaning, each finish is treated to withstand road grime and exhaust soot while maintaining its premium luster. Key Features: Precision Engineering: Specifically developed for the latest generation of Active Autowerke G8X valved rear exhausts. Genuine Carbon Fiber: Carbon variants utilize a real plain-weave carbon sleeve riveted to a double-walled stainless base. Corrosion Resistance: 304 Stainless Steel construction ensures the tips will not rust or degrade over time. Shadowline Compatibility: Multiple finish options allow for a perfect match with BMW’s various exterior trim packages. USA Fabricated: Designed and test-fitted in Miami, FL, to ensure 100% fitment accuracy. Specifications & Tip Options: Inlet/Outlet: 70mm Inlet / 100mm Outlet Construction: TIG-welded 304 Stainless Steel Hardware: Includes all necessary set-screws or clamps for installation Available Finishes: Brushed Stainless Steel Matte Black Coated Carbon Fiber over Brushed Stainless Carbon Fiber over Black Chrome Vehicle Fitment: * 2021+ BMW M3 (G80) / M3 Competition / xDrive 2021+ BMW M4 (G82) / M4 Competition / xDrive 2021+ BMW M4 Convertible (G83) 2023+ BMW M2 (G87)

Show More Show Less

Vargas Remote Oil Filter Plate & Fittings - -10AN - BMW S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52164924

Part#: S58OFILPLATE

Ships in 10 Business Days

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

For dedicated drag racing applications where every ounce of weight and simplicity matters, the VTT S58 Remote Oil Plate is the ultimate "delete" solution.

Vargas Plug & Play Pre And Post Throttle MAP Sensor Kit - 6B 4W - BMW...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52129729

Part#: VTT56BSENSKIT64

Ships in 10 Business Days

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

The VTT 6-Bar MAP sensor kit provides the necessary overhead to monitor boost levels with a linear voltage scale that makes software calibration straightforward.

Vargas Ignition Coil Kit (Blue) - B58/B48/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5309599

Part#: VTT-COIL-B58-BLU

Ships in 10 Business Days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less