BMW G80 M3 S58 3.0L

Carbon Fiber M4 Style Trunk Spoiler - G20/G80

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6212250

Part#: G20CFM4SPLR

Ships in 5 Business Days

$ 225.00 USD

Add to Wish List

Qty

$ 225.00 USD

Add to Wish List

M4 designed carbon fiber trunk spoiler for your G20/G80 with a direct fit utilizing 3M double sided tape. No drilling required. Composed of fiber reinforced polymer and glossy carbon fiber overlay.

CSL Style Carbon Fiber Front Grille - G8X M3 M4 W/ Auto Cruise Contro...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21275571

Part#: G8XCSLG-ACC

In Stock

$ 675.00 USD

Add to Wish List

Qty

$ 675.00 USD

Add to Wish List

Are you looking to give your G80 or G82 a new stylish front grill instead of the new generation grill? The Suvneer Motorsports CSL Designed G8X Carbon Fiber Grill is the perfect add-on to give your G8X the perfect upgrade. We suggest customers seek professional installation since equipping these products will require the removal of parts currently installed to better secure fitment to your vehicle. Build Material: Fiber-Reinforced Polymer (FRP) and Glossy Carbon Fiber Coating

Show More Show Less

CSL Style Carbon Fiber Front Grille - G8X M3 M4 W/O Auto Cruise Contr...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21275570

Part#: G8XCSLG

In Stock

$ 699.00 USD

Add to Wish List

Qty

$ 699.00 USD

Add to Wish List

Are you looking to give your G80 or G82 a new stylish front grill instead of the new generation grill? The Suvneer Motorsports CSL Designed G8X Carbon Fiber Grill is the perfect add-on to give your G8X the perfect upgrade. We suggest customers seek professional installation since equipping these products will require the removal of parts currently installed to better secure fitment to your vehicle. Build Material: Fiber-Reinforced Polymer (FRP) and Glossy Carbon Fiber Coating

Show More Show Less

R1 Style Carbon Fiber Side Skirt Extensions - G80/G20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6212272

Part#: G80SIDESPL-R1

Ships in 5 Business Days

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

R1 inspired dry-carbon fiber side skirt extensions for G80 M3 and G20 M-Sport models. Direct bolt-on, no modification required. Composed of fiber reinforced polymer and glossy carbon fiber overlay

19x11" ET22 Satin Black APEX VS-5RS Forged BMW Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:18965490

Part#: VS5RS1911ET22SMB

Ships in 5 Business Days

$ 929.00 USD

Add to Wish List

Qty

$ 929.00 USD

Add to Wish List

20x11" ET18 Anthracite APEX VS-5RS Forged BMW Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:14155782

Part#: VS5RS2011ET18AN

Ships in 5 Business Days

$ 1,029.00 USD

Add to Wish List

Qty

$ 1,029.00 USD

Add to Wish List

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: BRAND: APEX DESIGNED FOR: No WHEEL CONSTRUCTION: Forged MODEL: VS-5RS WHEEL SIZE: 20x11" ET18 WHEEL DIAMETER: 20" WHEEL WIDTH: 11.0" OFFSET: ET18 FINISH: Anthracite FACE PROFILE: Profile 4; super deep concavity BOLT PATTERN: 5x112mm CENTER BORE: 66.6mm LOAD RATING: 1,600 lbs WEIGHT: ~21.7 lbs REGISTRATION #: STL - Passed On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

19" APEX VS-5 Square Wheel Set - Choose Your Finish!

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:40545998

Part#: VS5191012

Ships in 5 Business Days

Starting at $ 2,156.00 USD

Add to Wish List

Starting at $ 2,156.00 USD

Add to Wish List

APEX VS-5 19x10" ET12 Square Wheel Set VS-5 maximizes the performance potential of a flow-formed wheel. It combines features typically only found on forged wheels with a premium look at an unbeatable price. Features: Iconic 5-Spoke Design Side-Milled Spokes for Reduced Weight Reinforced Inner Lip for Strength Massive Brake Clearance Ultra-Concave Face Profiles Independently Tested and Certified Unmatched Replacement Program Lifetime Structural Warranty The VS-5 brings the aggressive look of our iconic forged VS-5RS to a flow-formed wheel. At a fraction of the price of its forged sibling, VS-5 punches well above its weight and maximizes the performance potential of a flow-formed wheel. With nearly two decades of experience perfecting track-ready flow-formed wheels, we engineered the VS-5 to deliver Real Performance at an unbeatable value. With a strength-to-weight ratio and features typically reserved for forged wheels, the VS-5 pushes the boundaries of flow-formed manufacturing to the max. Weighing only ~2-2.5 lbs more than its forged sibling, the VS-5 isn’t just a top tier option in the flow-formed space, it’s a wheel we consider the last step in performance before leveling up to a forged design. Flow-forming enables us to create high-performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow-formed wheels have a higher load rating than some competitors' forged wheels. A critical part of VS-5’s remarkable weight-savings, side-milled spokes also help with its stunning looks. The VS-5 features advanced side-milled spokes that have any excess material that doesn’t add strength removed from the sides of the spokes via precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise, we believe it's essential. The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our flow-formed Evolution Line adds more material to this vulnerable area as an added layer of protection against impact from track berms, potholes, and whatever else the road may throw at you.

Show More Show Less

Suvneer Carbon Fiber Front Lip - G80 M3/G82 M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6212279

Part#: G8XSUVLIP

Ships on Jun 26, 2026

$ 749.00 USD

Add to Wish List

Qty

$ 749.00 USD

Add to Wish List

Carbon fiber front lip for the G80/G82 M3/M4. Direct bolt on with self tapping screws. No modification required! Composed of fiber reinforced polymer and glossy carbon fiber overlay.

Suvneer Motorsports Carbon Fiber Rear Bumper Splitters - G80 M3, G82...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25772525

Part#: G8XRRSPL-SUV

In Stock

Sale - Save 28% $ 295.00

This product was last offered at the strikethrough price on
05-03-2026

$ 211.76 USD

Add to Wish List

Qty

Sale - Save 28%

$ 295.00

This product was last offered at the strikethrough price on
05-03-2026

$ 211.76 USD

Add to Wish List

Introducing the Suvneer Motorsports™ G8x M3/M4 Carbon Fiber Rear Bumper Splitter – an extraordinary enhancement designed to augment the rear aesthetics of your BMW G8x M3 or M4. Meticulously crafted with a focus on both style and performance, these carbon fiber rear bumper splitters seamlessly marry form and function, making a powerful visual statement on the road. Crafted from top-tier carbon fiber materials, these rear bumper splitters contribute to the overall lightweight construction of your vehicle while exuding a modern and sporty appeal. The carbon fiber build ensures not only durability and strength but also a sleek appearance that perfectly complements the dynamic nature of the BMW G8x M3/M4. Choose the Suvneer Motorsports™ G8x M3/M4 Carbon Fiber Rear Bumper Splitter for a sophisticated blend of form and function. Elevate your BMW G8x M3/M4's presence on the road with these premium carbon fiber splitters that exemplify precision engineering and a commitment to delivering a stylish and performance-driven enhancement for your driving experience. Key Features: Material: High-quality dry carbon fiber Precision Fitment: Designed for the G8x M3 / M4 chassis for a seamless integration Lightweight: Carbon fiber construction reduces weight while maintaining strength Aerodynamic Enhancement: Improves airflow and downforce for better stability Sleek Design: 2-piece diffuser design adds a sporty and aggressive look to your vehicle We encourage customers to seek professional installation since equipping these products will require the removal of parts currently installed, to better secure fitment to your vehicle.

Show More Show Less

Suvneer Motorsports G8X Dry Carbon Fiber Bumper Trim - G80 M3/ G82 M4...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:23516108

Part#: G8XFTTRIM

In Stock

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

Presenting the BMW G8X Dry Carbon Fiber Front Bumper Trim – a refined and lightweight enhancement engineered to enhance the visual allure of your BMW G8X. Meticulously crafted with precision from top-tier dry carbon fiber, this front bumper trim seamlessly harmonizes with the vehicle's design, introducing a touch of contemporary sophistication. Elevate the aesthetic appeal of your BMW G8X with this premium dry carbon fiber accessory – an impeccable union of style and precision engineering.

Show More Show Less

Suvneer Carbon Fiber Fender Vents - G80 M3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:39565571

Part#: G80FENDVENTS-SUV

Ships in 5 Business Days

$ 390.00 USD

Add to Wish List

Qty

$ 390.00 USD

Add to Wish List

Enhance the aesthetics of your G80 M3 with Suvneers Carbon Fiber Fender Vents. Featuring a sleek carbon fiber construction for a lightweight and durable upgrade, these vents are designed to complement the aggressive factory lines of the G80 M3. The carbon fiber weave offers a high-gloss, UV-protected finish that resists fading, ensuring long-lasting style. These vents replace your factory vents and allow more air flow out of your fender, helping to reduce underhood temperatures. Features: Carbon Fiber Construction Designed for seamless integration with the G80 M3 Improves airflow and cooling Adds a sporty and aggressive look to your BMW

Show More Show Less

BMW G8X Akrapovic Tail Pipe Set - Classic Carbon Design

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:24444445

Part#: TP-CT/68

In Stock at Vendor

$ 2,215.99 USD

Add to Wish List

Qty

$ 2,215.99 USD

Add to Wish List

BMW G8X Akrapovic Tail Pipe Set - Classic Carbon Design offers an exceptional upgrade for those seeking both performance and aesthetics. These tailpipes are crafted by Akrapovic, renowned for their high-quality engineering and stylish designs. The Classic Carbon Design adds a distinctive, aggressive look to the vehicle, combining superior craftsmanship with performance benefits.

High-Quality Craftsmanship: Engineered by Akrapovic for unparalleled durability and performance.
Distinctive Style: Classic Carbon Design provides a sleek, aggressive appearance.
Enhanced Performance: Designed to optimize exhaust flow and improve overall vehicle performance.
Easy Installation: Direct fit for BMW G8X models, making installation straightforward with no modifications required.
Premium Materials: Made from high-quality carbon fiber for both durability and lightweight performance.

Show More Show Less

Akrapovic Downpipe With Cat - G80/G82 M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3018044

Part#: DP-BM/SS/8

In Stock at Vendor

$ 4,331.99 USD

Add to Wish List

Qty

$ 4,331.99 USD

Add to Wish List

This product is crafted from high-quality stainless steel, with the front part of the downpipe cast in Akrapovič’s in-house foundry. A sporty 300 cpsi catalytic converter is integrated into the downpipe, with the heat insulation made of stainless steel and a flexible tube incorporated into the middle section. It delivers a pure racing sound, full of emotion and adrenalin-inducing enjoyment, and great feedback at high revs, all without unwanted drone.

Show More Show Less

Carbon Fiber HighPro Style Trunk Spoiler - G20/G80

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6212252

Part#: G20CFPROSPLR

Ships in 5 Business Days

$ 266.99 USD

Add to Wish List

Qty

$ 266.99 USD

Add to Wish List

HighPro designed carbon fiber trunk spoiler for your G20/G80 with a direct fit utilizing 3M double sided tape. No drilling required. Composed of fiber reinforced polymer and glossy carbon fiber overlay.

Show More Show Less

Suvneer Motorsports MP Designed G8X Carbon Fiber Canards - G80 M3/ G8...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25042577

Part#: G8XCANARDS

Ships in 5 Business Days

$ 280.00 USD

Add to Wish List

Qty

$ 280.00 USD

Add to Wish List

Suvneer's MP Designed G Series Carbon Fiber Canards are designed for the G80 M3 and G82 M4 to give your BMW a unique look. Professional installation is recommended as equipping these products requires the moval of parts currently installed to better secure fitment to your BMW. Build Material: Fiber-Reinforced Polymer (FRP) and Glossy Carbon Fiber Coating

Show More Show Less

Suvneer Dry Carbon Fiber M Performance Style Wing - G8x M3/M4 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6699663

Part#: G8XMPWING

Ships in 5 Business Days

$ 895.00 USD

Add to Wish List

Qty

$ 895.00 USD

Add to Wish List

This M Performance style spoiler comes in a striking 2x2 weave dry carbon fiber pattern and finished in a glossy UV protected clear coat. Perfect for the G8x M3/M4 when you want to give the rear end a more aggressive look while also improving aerodynamics!

Show More Show Less

Carbon Fiber Performance Style Trunk Spoiler - G20/G80

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6212253

Part#: G20CFPSPLR

Ships in 5 Business Days

$ 225.00 USD

Add to Wish List

Qty

$ 225.00 USD

Add to Wish List

Performance designed carbon fiber trunk spoiler for your G20/G80 with a direct fit utilizing 3M double sided tape. No drilling required. Composed of fiber reinforced polymer and glossy carbon fiber overlay.

Show More Show Less

Akrapovic Titanium Exhaust Suite - G80/G82 M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3018050

Part#: BM/T/21H

In Stock at Vendor

Starting at $ 12,114.98 USD

Add to Wish List

Starting at $ 12,114.98 USD

Add to Wish List

Akrapovic is the first to market with the new G80/G82 Exhaust Suite. This exhaust suite has a variety of options from Downpipes, Center Section, Tip Style, Sound Kit, and Diffusors to help you get the configuration that meets your needs.

Show More Show Less

19" APEX VS-5RS Staggered Wheel Set - Pick Your Finish ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19627054

Part#: VS5RS199H102538

Ships in 5 Business Days

Starting at $ 3,236.00 USD

Add to Wish List

Starting at $ 3,236.00 USD

Add to Wish List

Forged wheels provide a weight reduction while having a stronger wheel for shaving down those lap times! 19x9 Et25/19x10 ET38 5x112 66.6CB The best wheels to come to market at an even better price. These forged Sprint Line wheels have so many benefits why would you ever buy another wheel. VS-5RS wheels start off as a blank profile made specifically by Apex wheels, with about 10,000 metric tons of pressure the aluminum starts off as a robust metal eliminating porosity and improving the structure of the wheel to start off as strong as possible. Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 2x 19x9 ET25/2x 19x10 ET38 APEX VS-5RS Forged BMW Wheels in your choice of finish! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

BMW G8X M2 M3 Akrapovic Tail Pipe Set - Octagonal Carbon Design ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28537478

Part#: TP-CT/69

Ships in 3 Business Days

$ 2,391.99

This product was last offered at the strikethrough price on
05-07-2026

$ 2,272.99 USD

Add to Wish List

Qty

$ 2,272.99 USD

Add to Wish List

The pioneering octagonal form, meticulously crafted from lightweight titanium and enhanced with a carbon-fiber outer layer, harmoniously accentuates the car's lines. Alternatively, for enthusiasts of a classic look, there's the enduring cylindrical design, likewise fashioned from top-tier materials. These refreshed BMW tailpipes by Akrapovič cater to diverse tastes while upholding exceptional craftsmanship standards.

Show More Show Less

Akrapovic Sound Kit for BMW G80 G82 M3 M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3018043

Part#: P-HF1384

Ships in 3 Business Days

$ 605.99 USD

Add to Wish List

Qty

$ 605.99 USD

Add to Wish List

Akrapovic Sound Kit for BMW G80 G82 M3 M4 offers BMW owners the ability to control the sound of their Akrapovic exhaust system directly from the cockpit. Utilizing advanced Akrapovic technology, this kit allows drivers to switch between a quieter mode and a sportier exhaust sound. The system includes a receiver, already integrated into the Evolution exhaust system, which operates the actuators to open or close the exhaust valves. Drivers can manage the sound with the Sound Remote Controller or the latest smartphone app, compatible with both iOS and Android devices.

Enhanced Control: Allows for easy switching between quiet and sporty exhaust modes.
Advanced Technology: Features Akrapovic technology for precise sound management.
Convenient Operation: Control the exhaust valves using the Sound Remote Controller or a smartphone app.
Compatibility: Designed specifically for BMW G80 and G82 M3 and M4 models.
Easy Integration: Receiver included in the Evolution system for straightforward installation.

Show More Show Less

Akrapovic Titanium Slip On Exhaust With Classic Carbon Fiber Tips - G...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3018041

Part#: BM/T/21H-C

In Stock at Vendor

$ 9,962.99 USD

Add to Wish List

Qty

$ 9,962.99 USD

Add to Wish List

Includes rounded Classic Carbon Fiber Exhaust Tips The exhaust tone is most noticeable as you move through the gears and accelerate, and this can be further controlled through the addition of the optional Akrapovic Sound Kit to provide increased aural pleasure. Akrapovic has achieved power gains of 10.9 HP at 6,000 rpm and torque increases of 10.3 lb/ft Torque at 6,000 rpm when tested on the Akrapovic dyno against a G80 M3 with a stock M Sport exhaust system for comparison.

Show More Show Less

Dry-Carbon Fiber Fender Trim - G80 M3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6212289

Part#: G80FENDTRIMS

Ships in 5 Business Days

$ 350.00 USD

Add to Wish List

Qty

$ 350.00 USD

Add to Wish List

Dry-Carbon fiber fender for G80 meticulously crafted to ensure a great fit for your vehicle. Direct Fit. Composed of dry-carbon fiber.

Rear Carbon Fiber Diffuser - Gloss Carbon - G80/G82 M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3018048

Part#: DI-BM/CA/9/G

In Stock at Vendor

$ 2,328.99 USD

Add to Wish List

Qty

$ 2,328.99 USD

Add to Wish List

The stunning carbon-fiber diffuser is offered as an option with the choice of a high-gloss or matt finish. It is a completely new design from the one that comes as standard on the car, and it gives the rear of the M8 a more aggressive and sporty feel. It shows off the Akrapovic tailpipes to their full extent and is a perfect accompaniment to the exhaust suite. Fitment notice: With Akrapovič diffuser, hands-free trunk-lid opening/closing sensor is not working.

Show More Show Less

R1 Designed Carbon Fiber Trunk Spoiler - BMW G20 3-Series / G80 M3 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fits M-Sport G20 Models Only

T#:26971829

Part#: G20CFR1SPOILER

Back Ordered

$ 345.00 USD

Add to Wish List

Qty

$ 345.00 USD

Add to Wish List

The R1 Designed G80/G20 Carbon Fiber spoiler is engineered to deliver unparalleled performance and style for automotive enthusiasts. Crafted with precision using high-quality dry carbon fiber material, this wing seamlessly integrates with the sleek lines of the BMW G80/G20 3-Series, enhancing both its aesthetics and aerodynamics. Designed for maximum functionality, the spoiler generates significant downforce while minimizing drag, ensuring improved stability and traction at high speeds. This allows drivers to confidently push their vehicle to its limits, whether on the track or the open road. Constructed with advanced manufacturing techniques, the dry carbon fiber construction offers exceptional strength-to-weight ratio, making the wing lightweight yet incredibly durable. This not only contributes to the overall performance of the vehicle but also emphasizes its high-performance pedigree. Key Features: Material: High-quality dry carbon fiber Precision Fitment: Designed for seamless integration with the G80/G20 chassis Lightweight: High-strength carbon fiber construction for improved performance Aerodynamic Enhancement: Enhances airflow and downforce for better stability Sleek Design: Adds a sporty and aggressive look to your vehicle With its combination of cutting-edge design and functional performance, the R1 Designed G80/G20 Carbon Fiber spoiler represents the pinnacle of aerodynamic engineering for automotive enthusiasts seeking both style and substance.

Show More Show Less

Akrapovic Titanium Slip On Exhaust With Octagonal Carbon Fiber Tips -...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3018042

Part#: BM/T/21H-BC

Back Ordered

$ 10,143.99 USD

Add to Wish List

Qty

$ 10,143.99 USD

Add to Wish List

Includes rounded Octagonal Carbon Fiber Exhaust Tips The exhaust tone is most noticeable as you move through the gears and accelerate, and this can be further controlled through the addition of the optional Akrapovic Sound Kit to provide increased aural pleasure. Akrapovic has achieved power gains of 10.9 HP at 6,000 rpm and torque increases of 10.3 lb/ft Torque at 6,000 rpm when tested on the Akrapovic dyno against a G80 M3 with a stock M Sport exhaust system for comparison.

Show More Show Less

19" APEX VS-5RE Square Wheel Set - Satin Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:40478203

Part#: 5RE191122SBKT

Back Ordered

$ 3,716.00 USD

Add to Wish List

Qty

$ 3,716.00 USD

Add to Wish List

Apex VS-5RE 19x11" ET22 Square Wheel Set The VS-5RE is the forged Enduro version of our popular VS-5 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Sharing a similar split five spoke layout to our popular Sprint Line VS-5RS, the all new VS-5RE was designed to prioritize both strength and stiffness. The reality is that most enthusiasts and racers benefit far more from increased strength than they would from a small decrease in weight. The VS-5RE and the Enduro line as a whole was introduced to give the enthusiast community the choice to choose what's best for their application. In our pursuit of absolute strength, the Forged VS-5RE was given dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a substantially reinforced outer lip. When all put together, the VS-5RE is rated at an impressive 2100 lb max load. A major increase over its Sprint Line counterpart sitting at a 1600 lb load rating. To achieve this level of strength, our engineers added a considerable amount of material to the areas where it matters most. This does come with a bit of a weight penalty, however a host of weight saving measures have been implemented to minimize its effect. Deep spoke scalloping is utilized to shave material from the sides of spokes without compromising strength. Outer lip pocketing, a feature only seen on the Enduro Line within the Apex catalog, does away with excess material on the outer lip between each spoke. Our aim is for the Enduro VS-5RE to become the wheel of choice for anyone who appreciates the benefit of strength and stiffness over small weight savings. One must ask themselves how much faster will they truly be by dropping a few pounds of rotating mass and is it worth the trade off of losing confidence that your wheels will hold up lap after lap. Wheels lacking in stiffness flex under load, leading to lost camber during demanding cornering. Ultra lightweight wheels look great on paper, but they could cost you in the form of a lost podium or high cost of replacement. Whether you’re a hardcore racer or an enthusiast who appreciates great engineering, the VS-5RE is the answer.

Show More Show Less

Suvneer Motorsports Wheel Hanger - M14x1.25mm - Anodized Gunmetal ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26005169

Part#: WHLHGR-14125-GM

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Introducing the Suvneer Motorsports™ Wheel Hanger – an essential tool designed to streamline the wheel installation process, embodying the precision and quality synonymous with the Suvneer Motorsports™ brand. Crafted with a keen eye for detail and performance, this wheel hanger is a must-have for automotive enthusiasts and professionals seeking a reliable and efficient solution. Constructed from high-grade materials, the Suvneer Motorsports™ Wheel Hanger combines durability with precision engineering. Its robust design ensures longevity, making it a trusted companion for both amateur and seasoned mechanics alike. The hanger's strength lies in its ability to simplify the often intricate task of wheel installation. The ergonomic design of the Suvneer Motorsports™ Wheel Hanger is crafted for user comfort and efficiency. With a sleek, user-friendly shape, it provides a secure grip, allowing for ease of handling during the wheel installation process. The precisely machined threads deliver a seamless engagement with lug holes, eliminating the frustration of cross-threading and ensuring a smooth and trouble-free wheel installation. Versatility is at the forefront of the Wheel Hanger's design. Engineered to accommodate various lug patterns, it is universally compatible, catering to a wide range of vehicle makes and models. This adaptability makes it an indispensable tool for any automotive enthusiast, ensuring that the right tool is always at hand for a hassle-free wheel installation experience. Experience the Suvneer Motorsports™ commitment to excellence with the Wheel Hanger – a tool that seamlessly combines functionality, durability, and ease of use. Elevate your garage experience with a precision-engineered solution that simplifies the wheel installation process, allowing you to achieve professional results effortlessly. Trust in the Suvneer Motorsports™ Wheel Hanger to deliver a superior wheel installation experience where performance meets convenience in the world of motorsports. Key Features: Material: Strong 6061-T6 Aluminum Alloy Precision Fitment: Designed to help hold your wheel in place. Lightweight: Precipitated Hardened Aluminum

Show More Show Less

Suvneer Motorsports Wheel Hanger - M14x1.25mm - Anodized Blue ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26005167

Part#: WHLHGR-14125-BL

Ships in 4 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Introducing the Suvneer Motorsports™ Wheel Hanger – an essential tool designed to streamline the wheel installation process, embodying the precision and quality synonymous with the Suvneer Motorsports™ brand. Crafted with a keen eye for detail and performance, this wheel hanger is a must-have for automotive enthusiasts and professionals seeking a reliable and efficient solution. Constructed from high-grade materials, the Suvneer Motorsports™ Wheel Hanger combines durability with precision engineering. Its robust design ensures longevity, making it a trusted companion for both amateur and seasoned mechanics alike. The hanger's strength lies in its ability to simplify the often intricate task of wheel installation. The ergonomic design of the Suvneer Motorsports™ Wheel Hanger is crafted for user comfort and efficiency. With a sleek, user-friendly shape, it provides a secure grip, allowing for ease of handling during the wheel installation process. The precisely machined threads deliver a seamless engagement with lug holes, eliminating the frustration of cross-threading and ensuring a smooth and trouble-free wheel installation. Versatility is at the forefront of the Wheel Hanger's design. Engineered to accommodate various lug patterns, it is universally compatible, catering to a wide range of vehicle makes and models. This adaptability makes it an indispensable tool for any automotive enthusiast, ensuring that the right tool is always at hand for a hassle-free wheel installation experience. Experience the Suvneer Motorsports™ commitment to excellence with the Wheel Hanger – a tool that seamlessly combines functionality, durability, and ease of use. Elevate your garage experience with a precision-engineered solution that simplifies the wheel installation process, allowing you to achieve professional results effortlessly. Trust in the Suvneer Motorsports™ Wheel Hanger to deliver a superior wheel installation experience where performance meets convenience in the world of motorsports. Key Features: Material: Strong 6061-T6 Aluminum Alloy Precision Fitment: Designed to help hold your wheel in place. Lightweight: Precipitated Hardened Aluminum

Show More Show Less

19" APEX VS-5RE Square Wheel Set - Anthracite

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:40478202

Part#: 5RE191122ANKT

In Stock

$ 3,716.00 USD

Add to Wish List

Qty

$ 3,716.00 USD

Add to Wish List

Apex VS-5RE 19x11" ET22 Square Wheel Set The VS-5RE is the forged Enduro version of our popular VS-5 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Sharing a similar split five spoke layout to our popular Sprint Line VS-5RS, the all new VS-5RE was designed to prioritize both strength and stiffness. The reality is that most enthusiasts and racers benefit far more from increased strength than they would from a small decrease in weight. The VS-5RE and the Enduro line as a whole was introduced to give the enthusiast community the choice to choose what's best for their application. In our pursuit of absolute strength, the Forged VS-5RE was given dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a substantially reinforced outer lip. When all put together, the VS-5RE is rated at an impressive 2100 lb max load. A major increase over its Sprint Line counterpart sitting at a 1600 lb load rating. To achieve this level of strength, our engineers added a considerable amount of material to the areas where it matters most. This does come with a bit of a weight penalty, however a host of weight saving measures have been implemented to minimize its effect. Deep spoke scalloping is utilized to shave material from the sides of spokes without compromising strength. Outer lip pocketing, a feature only seen on the Enduro Line within the Apex catalog, does away with excess material on the outer lip between each spoke. Our aim is for the Enduro VS-5RE to become the wheel of choice for anyone who appreciates the benefit of strength and stiffness over small weight savings. One must ask themselves how much faster will they truly be by dropping a few pounds of rotating mass and is it worth the trade off of losing confidence that your wheels will hold up lap after lap. Wheels lacking in stiffness flex under load, leading to lost camber during demanding cornering. Ultra lightweight wheels look great on paper, but they could cost you in the form of a lost podium or high cost of replacement. Whether you’re a hardcore racer or an enthusiast who appreciates great engineering, the VS-5RE is the answer.

Show More Show Less

Suvneer Motorsports Wheel Hanger - M14x1.25mm - Anodized Red ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26005166

Part#: WHLHGR-14125-RD

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Introducing the Suvneer Motorsports™ Wheel Hanger – an essential tool designed to streamline the wheel installation process, embodying the precision and quality synonymous with the Suvneer Motorsports™ brand. Crafted with a keen eye for detail and performance, this wheel hanger is a must-have for automotive enthusiasts and professionals seeking a reliable and efficient solution. Constructed from high-grade materials, the Suvneer Motorsports™ Wheel Hanger combines durability with precision engineering. Its robust design ensures longevity, making it a trusted companion for both amateur and seasoned mechanics alike. The hanger's strength lies in its ability to simplify the often intricate task of wheel installation. The ergonomic design of the Suvneer Motorsports™ Wheel Hanger is crafted for user comfort and efficiency. With a sleek, user-friendly shape, it provides a secure grip, allowing for ease of handling during the wheel installation process. The precisely machined threads deliver a seamless engagement with lug holes, eliminating the frustration of cross-threading and ensuring a smooth and trouble-free wheel installation. Versatility is at the forefront of the Wheel Hanger's design. Engineered to accommodate various lug patterns, it is universally compatible, catering to a wide range of vehicle makes and models. This adaptability makes it an indispensable tool for any automotive enthusiast, ensuring that the right tool is always at hand for a hassle-free wheel installation experience. Experience the Suvneer Motorsports™ commitment to excellence with the Wheel Hanger – a tool that seamlessly combines functionality, durability, and ease of use. Elevate your garage experience with a precision-engineered solution that simplifies the wheel installation process, allowing you to achieve professional results effortlessly. Trust in the Suvneer Motorsports™ Wheel Hanger to deliver a superior wheel installation experience where performance meets convenience in the world of motorsports. Key Features: Material: Strong 6061-T6 Aluminum Alloy Precision Fitment: Designed to help hold your wheel in place. Lightweight: Precipitated Hardened Aluminum

Show More Show Less

APEX Gloss Black Wheel Center Cap - BMW/GR Supra 5x112mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:28637252

Part#: HWAPXCAPSUP5112R

In Stock

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

19" APEX ML-10RT Forged Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:31788353

Part#: ML10199525112RKT

In Stock

$ 3,596.00 USD

Add to Wish List

Qty

$ 3,596.00 USD

Add to Wish List

APEX ML-10RT 19" Forged Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! Pre-Order: ETA December 2024

T#:31788356

Part#: ML10199525112GKT

Ships in 5 Business Days

$ 3,596.00 USD

Add to Wish List

Qty

$ 3,596.00 USD

Add to Wish List

APEX Solid Gloss Black BMW Center Caps - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:639899

Part#: HW-APX-CAP-BLK

Ships in 9 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

APEX Wheels Metal Valve Stem - Black - BMW & MINI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:593644

Part#: HW-OEM-VALVE-BK

Ships in 2 Business Days

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19693195

Part#: VS5RS20108SQ

Ships in 5 Business Days

Starting at $ 4,036.00 USD

Add to Wish List

Starting at $ 4,036.00 USD

Add to Wish List

20x10 ET8 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

20" APEX ML-10RT Staggered Wheel Set - Anthracite w/ Machined Li...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! Now available for Pre-Order!

T#:37993440

Part#: ML10RT201011ANKT

Ships in 5 Business Days

$ 4,076.00 USD

Add to Wish List

Qty

$ 4,076.00 USD

Add to Wish List

Introducing the ML-10RT, a forged wheel born from an engineering passion project and brought to life by the enthusiast community. Designed for those who demand both style and performance, the ML-10RT blends classic motorsport aesthetics with cutting-edge monoblock forging technology. Crafted from lightweight forged aluminum, the ML-10RT delivers exceptional strength, enhancing durability and handling. Its sleek multi-spoke design not only elevates your vehicle’s look but also ensures optimal brake clearance. Whether on the street or the track, this wheel is the perfect fusion of performance and style.

Show More Show Less

Suvneer Motorsports OE+ Aluminum Hood - BMW G80 M3, G82/G83 M4 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38195404

Part#: G8XHOOD-AL

Ships in 5 Business Days

$ 1,300.00 USD

Add to Wish List

Qty

$ 1,300.00 USD

Add to Wish List

Enhance your vehicle with Suvneer Motorsports' new OE+ Aluminum Hood, designed for both style and performance. Crafted from lightweight aluminum, this hood not only improves aesthetics but also ensures a precise factory fit. Featuring dual hood vents, it optimizes cooling by reducing under-hood temperatures and directing hot air out of the engine bay. This airflow improvement not only enhances thermal efficiency but also increases downforce, providing your M3/M4 with greater stability at high speeds.

Show More Show Less

19"x 20" Apex VS-5RS Staggered Wheel Set - Pick Your Finish...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19693212

Part#: VS5RS19102011

Ships in 5 Business Days

Starting at $ 3,876.00 USD

Add to Wish List

Starting at $ 3,876.00 USD

Add to Wish List

20x11 ET18 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

Suvneer HighPro Style Carbon Fiber Trunk Spoiler - BMW G20/G80 3 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51356003

Part#: G20CFPROSPOILER

Ships in 5 Business Days

$ 240.00 USD

Add to Wish List

Qty

$ 240.00 USD

Add to Wish List

The Suvneer HighPro Style Carbon Fiber Trunk Spoiler is a high-grade aerodynamic component designed specifically for the G-chassis BMW 3-Series and M3 platforms.

19x10" ET12 APEX SM-10RS Square Wheel Set - G8X M2 M3 M4 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:33479598

Part#: SM10RS1910

Ships in 5 Business Days

Starting at $ 3,556.00 USD

Add to Wish List

Starting at $ 3,556.00 USD

Add to Wish List

Introducing the Apex SM-10RS, part of the Sprint Line of forged wheels. Innovative engineering makes it light, forged manufacturing makes it strong. Wheel Specifications: Wheel Construction: Forged Design: SM-10RS Wheel Size: 19x10" ET12 Wheel Diameter: 19" Wheel Width: 10.0" Offset: ET12 Center Bore: 66.6mm Face Profile: Profile 4 Load Rating: 1,600 lbs Tested By: STL Registration #: STL-AX3-0001 APEX's new forgings weigh as much as 120 pounds before machining. To form such a thick blank APEX requires special equipment capable of 10,000 metric tons of pressure. This extreme pressure increases the strength of the aluminum by eliminating porosity and improving the grain structure. Many companies use 3rd-party blanks intended for non-motorsport wheels which can severely limit sizes, concavity, spoke design, and critical brake clearance. APEX designed their very own blank profiles from scratch to give us total control over the final product. One of the most noticeable features of the SM-10RS is its use of side-milling on both sides of each spoke, creating an I-beam effect. Any excess material that doesn’t add strength is carved out using a precision CNC ball cutter. Side-milling is often deemed cost-prohibitive by others, but for true performance without compromise, we believe it's essential. The SM-10RS is not just another style to choose from. APEX used Finite Element Analysis of bending loads to optimize spoke geometry for greater stiffness without increasing weight. In fact, the SM-10RS is nearly identical in weight to the popular VS-5RS yet almost 10% stiffer, and 25% stiffer than the first generation of forged wheels.

Show More Show Less

Suvneer Carbon Fiber Diffuser Undertray - BMW G80 M3, G82 M4 ...

For vehicles from 2021-Present

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51356099

Part#: G8XSUVCFDIFTRAY

Ships in 5 Business Days

$ 825.00 USD

Add to Wish List

Qty

$ 825.00 USD

Add to Wish List

The Suvneer Motorsports™ Carbon Fiber Undertray is the final piece of the puzzle for a show-quality G80 or G82.

18" VS5RS APEX Square Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19792208

Part#: VS5RS181030SQ

Ships in 5 Business Days

Starting at $ 3,076.00 USD

Add to Wish List

Starting at $ 3,076.00 USD

Add to Wish List

18x10 ET30 The best wheels to come to market at an even better price. These forged Sprint Line wheels have so many benefits why would you ever buy another wheel? These wheels start off as a blank profile made specifically by Apex Wheels, with about 10,000 metric tons of pressure the aluminum starts off as a robust metal eliminating porosity and improving the structure of the wheel to start off as strong as possible. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less