BMW Engine Parts for BMW G80 M3 S58 3.0L

Located at the rear of the cylinder head, this essential component controls the central VANOS (variable camshaft timing) valve. Often, these actuators fail due to oil contamination and electrical issues, leading to drivability problems and illuminated check engine lights.

Thankfully, URO Parts offers an affordable, high-quality replacement that functions just like the original factory part.

Features:

Guaranteed Fit: Designed for perfect compatibility with your vehicle. Durable Construction: Made from high-strength materials that resist engine heat and vibration. Precise Manufacturing: Built to OE dimensions for accurate clearances and alignment. Optimal Performance: Matches OE specifications to ensure proper timing at all engine speeds. URO Parts boasts an impressive catalog of over 8,000 premium spare parts, many of which are specifically engineered to replace factory BMW components. With a strong commitment to precision, durability, and value, URO Parts ensures each part meets the highest standards. For reliable and cost-effective replacement components, URO Parts is the go-to choice.

BMW / MINI SCAN TOOL:

The BMW Service Engine Soon (aka Check Engine Light) has thousands of different meanings. Everything from low coolant messages, engine misfires, transmission temperatures, light bulb failures, brake pad replacement, and so much more. The sophisticated electronics are throughout the car. Isn't it time for a BMW scan tool that can keep up with all of your DIY needs? We think we've found the one - the DIY BMW diagnostic tool that trumps them all. The Schwaben BMW elite scan tool.

Not all diagnostic scan tools are the same. The cheap ones you find at catalog outlet stores are generic and give you generic information (sometimes not even that). BMW actually has very specialized diagnostic systems that they only share with dealers. The factory diagnostic tools require specialized programs on dedicated laptops that are a pain for the average DIYer to set up and use. The Schwaben BMW diagnostic tool is designed specifically for BMW and MINI. It's not generic and packs some serious features in its small case. We've used this in our service department and were very impressed with the depth of its capabilities. It has features that only the factory ISTA/INPA programs have. Below is a partial list of its prime features -

• Works on BMW models from 1987-current*; Works on MINI models from 2002-current*
• Compatible with global OBDII / EOBD standards
• Reads and clears codes and turns off SES/CEL/MIL/DTC (BMW Powertrain codes, Chassis codes, Body codes, and CAN codes)
• Special troubleshooting functions to walk you through codes (like the BMW Test Plan)
• Check and activate electronic components like switches, relays, and actuators
• Records live sensor data
• Provides live data graphing
• Merges graphs for easy and intuitive diagnosis
• Displays freeze frame data
• Create a custom data stream
• Reads and resets most adaptations
• Reads OBD Readiness
• Does active tests on systems and components*
• Performs special functions, coding, security access*
• Code and program replacement control units
• Supports all 10 OBDII test modes
• Resets oil service light
• Sets inspection 1, 2 service intervals (manual or automatic)
• Sets inspection mileage
• Deactivates and reactivates brake control system
• Retracts calipers for brake pad replacement on newer models
• Initializes the wear indicator if new pads installed
• Diagnoses Electronic Parking Brake caliper functionality
• Multilingual menu options and code definitions
• Memory card for data backup and software update
• Print feature
• Large TFT color screen and menu-driven operations
• Free life time updates

*Certain functions may be limited due to the requirement of a special factory access code or tools. While versatile, this scan tool covers a wide range of BMW models and platforms and it cannot be a catch-all tool for every job. Some functions may not be available but will be reviewed in future updates.

DIGITAL CIRCUIT TESTER:

Embark on a new level of circuit testing with the Schwaben Digital Circuit Tester With Test Probes. Whether you're a seasoned professional or a dedicated enthusiast, this tool equips you with the confidence and precision needed for intricate diagnostics. And with our LIFETIME REPLACEMENT program, you can rest assured that you've found the ultimate circuit tester.

Features:

• Versatile Voltage Compatibility: Seamlessly navigate 6, 12, and 24V systems, offering comprehensive diagnostics for various setups.
• Trusted CE Approval: Prioritize safety and accuracy with CE Approval, allowing you to confidently undertake complex circuit assessments.
• Extended Reach: Effortlessly maneuver through testing scenarios, even in challenging areas, with the coil cord's 12-foot extension.
• Pinpoint Accuracy: Eliminate guesswork with the real-time, precise voltage readings displayed on the digital screen, facilitating well-informed decisions.
• Intuitive Power and Ground Indication: Streamline your testing process using vibrant red (power) and green (ground) LCD indicators for swift and accurate connections.
• Universal Compatibility: Seamlessly integrate with a wide range of circuit testing equipment thanks to the standard 4mm banana jacks on the probes, offering hassle-free use alongside your existing tools.

Includes:

• Digital circuit tester
• Piercing probe
• Long probe
• Small probe

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The Schwaben Piston Ring Filer is a vital tool for obtaining the precise end gap necessary for optimal piston ring performance.

This filer allows you to swiftly and accurately file piston rings to exact measurements, enhancing your engine’s efficiency and lifespan. By simply positioning the piston ring and turning the handle, you can easily rotate the abrasive wheel for a smooth and effective filing process.

**Note:** For the Schwaben Universal Piston Ring Compressor, check out T25805755!

Key Features:

• Optimize Performance: Achieve the perfect end gap crucial for top engine efficiency.
• Quick and Precise: File rings to exact specifications with ease.
• Easy Operation: Position the piston ring and turn the handle to effortlessly rotate the abrasive wheel.
• Enhanced Engine Longevity: Accurate end gaps contribute to longer engine life and better performance.

Instructions:

1. Position the Ring: Place the piston ring on the outer edge against the stop and align the ends squarely against the grinding wheel. Apply light, even pressure against the wheel to prevent grinding too large a gap.
2. Operate the Tool: Turn the handle so the grinding wheel turns towards the inside edge of the ring (counter-clockwise when viewed from the handle side of the tool).
3. Exercise Caution: This is a diamond grinding wheel. It cuts fast!

Checking Piston Ring Gap:

1. Deburr the Ring Ends: Carefully remove any burrs on the ring ends before placing the ring in the bore. A light touch with a fine abrasive stone works well.
2. Clean the Rings: Thoroughly clean the rings with lacquer thinner or acetone, as the paint coating from the factory may occasionally scratch the cylinder bore. Always wear gloves during this process.
3. Position the Ring in the Cylinder: Place the ring squarely in the cylinder bore, about 1" down from the deck surface. An upside-down flat-top piston will help you properly square the ring.
4. Measure the End Gap: Use a feeler gauge to measure the ring's end gap. Apply light grinding pressure and check frequently to avoid making the end gap too large.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Features & Benefits:

Two configurable linear 0-5V analog outputs Ability to calibrate O2 sensors for maximum accuracy Includes LC-2 controller and Bosch wideband O2 sensor Comes with a program cable, manual, and a 10 ft. sensor cable Includes a 1-inch mild steel exhaust bung Innovate MTS serial in/out capability Integrated dual-color status LED (green/red) Patented DirectDigital™ wideband sensor control Positive lock connectors for all connections Real-time display data on screen or with the powerful LogWorks software Range:

AFR (Air-Fuel Ratio) range from 7.4:1 to 22.4:1 (0.5 to 1.5 lambda)

The Borescope Inspection Camera offers 1920P HD resolution, a flexible 7.9mm probe, and a 16.4ft semi-rigid cable, making it ideal for inspecting hard-to-reach areas. Easily connect to IOS and Android devices, and use the IP67 waterproof probe for various applications, including automotive, plumbing, and home inspections.

Key Features:

• 1920P HD Resolution: Capture clear images and high-quality video at 1920x1440 resolution.
• Easy Connection: Connect quickly to IOS 9.0+ and Android 7+ devices via the 'SUP-ANESOK' app.
• Semi-Rigid Cable: 16.4ft cable offers a mix of flexibility and rigidity for precise inspections.
• Waterproof Probe: IP67-rated, capable of operating underwater up to 3.28 feet for 1 hour.
• Wide Applications: Suitable for automotive, plumbing, and home inspections, with adjustable brightness for low-light environments.

Includes:

• Borescope Camera
• Android Adapter
• Lightning Port Adapter
• USB Type-C Connector
• 16.4 ft. Semi-Rigid Cable
• Magnet
• Hook
• Mirror
• Protective Cap
• Manual

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Introducing Turbosmart’s OPR V2 Turbocharger Oil Pressure Regulator, a cutting-edge solution launched in 2022 that ensures steady oil pressure for your turbocharger. This innovative regulator features a return-less design with an integrated 44 Micron Stainless Steel Mesh Oil Filter, providing robust performance and protection.

The OPR V2 is the first of its kind, utilizing Turbosmart’s proprietary flow control method to maintain optimal oil pressure regardless of engine oil variables like pressure or temperature. It guarantees a smooth oil flow to your turbocharger, safeguarding critical components such as Exhaust Drive, Back & Charge Pressures from excessive oil pressure that could lead to oil consumption and smoke.

Gone are the days of guesswork with restrictors and complex plumbing for oil pressure regulation. The OPR V2 simplifies the process with its return-less, inline installation and the convenience of a built-in 44 Micron Oil Filter. This filter, made of serviceable and replaceable Stainless Steel Mesh, adds an extra layer of defense against engine oil debris that could harm your turbocharger.

Key Features:

Innovative Patent Pending Design Durable Aluminium (6262 T6) Anodised Body & Valve Regulated Oil Pressure Compatible with Most turbochargers Integrated Stainless Steel (304) Mesh Oil Filter -4AN Inlet and Outlet for easy installation 1/8 NPT Sensor/Gauge Port for monitoring Directional Inlet Feed Logic for optimized performance Laminar Flow Output for consistent oil delivery Compatible with all Engine Oils Designed and Manufactured in Australia

New DCSS 39/50 High-Performance Pump – F90000295

• Highest flow in-tank brushed fuel pump offering from TI Automotive / Walbro
• No Internal check valve - ideal for racing applications to build oil pressure prior to start-up
• Featuring award-winning DCSS technology
• E85 compatible
• High-pressure relief setting - supports supercharger and turbo applications
• Capable of supporting 900+HP at 60PSI naturally aspirated applications
• Complete Pump and kit combination – TCD495

Fuel: GAS & E85

Horsepower: 900+ at 60PSI, naturally aspirated applications

Over All Pump Length: 131mm

Main Housing Diameter: 39mm

Lower Housing Diameter: 50mm

Fuel Inlet Diameter: 11mm OD

Fuel Outlet Diameter: 11mm OD

Flow Rate: 535LPH at 40psi

Test Voltage: 13.5 Volts