BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW G80 M3 S58 3.0L

Here at Turner our mission was to amplify the G80/G82 with a proper catback exhaust system. To accomplish this goal, our engineers increased flow and delivered an exhaust system that captures the full unrestricted sound of the sonorous twin turbo inline-6 S58 engine. The increase in flow was gained from smooth flow path dual 3.0" stainless exhaust pipes that feed into one of the best designed mufflers on the market. Our engineers specifically designed the muffler with flow in mind to ensure that even with the exhaust valves closed, our muffler flows better and sounds better than the stock muffler. The best part of our Turner performance catback is the capability to control just how aggressive you want to your exhaust to sound, far beyond the point that the factory exhaust is able to perform. All of this plus the direct fitment and straight forward installation leads to our valved exhaust being the clear answer in your mission to find the best exhaust for your S58 powered G80 or G82.

The G80 took the world by storm by breaking the mold of BMW's standard design language. With the G80 and G82, a whole new generation of M car owners emerged. At first people were hesitant about the larger more distinguished front grilles, but after the shock was gone the true glory of BMW's newest M cars began to shine. The G80 M3 and G82 M4 are incredibly capable cars out of the box and Turner's large range of upgrades means the sky is the limit. Give your G80 or G82 the aggressive exhaust note that you wanted from the factory with Turner Motorsport's G80 G82 Stainless Valved Catback Exhaust.

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
3.0"OD Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Valved Muffler:
Optimized for superior flow over OEM
T304 Stainless Steel
Utilizes factory valve control
Performance:

Mid range torque and power increase 3600-4200 RPM
Torque gains: +14 ft/lbs @ 3850 RPM
Horsepower gains: +10 HP @ 3850 RPM
Smoother horsepower and torque delivery from 3000-6500 RPM ​
Performance Paired with Turner S58 Intake:

Mid range torque and power increase 3600-4200 RPM
Torque gains: +23 ft/lbs @ 3850 RPM
Horsepower gains: +17 HP @ 3850 RPM
Kit Contents:

Dual 3" Stainless Exhaust piping from secondary cats.
X pipe replacing middle muffler sections for better sound, performance and weight savings.
Valved muffler utilizing oem style exhaust valves
Optional Turner Slant Cut or Straight Cut Exhaust tips - 3.0" Inlet, 4.0" Outlet
Clamps and Hardware for an OEM+ install
Optional Exhaust Pipe Hanger Removal Pliers

Engineered for vehicles with vacuum-actuated exhaust valves, the ECS Remote Vacuum Exhaust Valve Control Kit puts you in complete command of your exhaust sound. This fully standalone system lets you open or close your valves instantly—no reliance on factory controls, drive modes, or complicated wiring.

At its heart is a self-contained vacuum pump and dedicated control module, operating entirely independent of your vehicle’s electronics. The result is broad compatibility with both OEM and aftermarket exhaust systems, allowing for the freedom to switch between aggressive performance sounds and a refined, quiet tone at the touch of a button.

Kit Includes:

Standalone Vacuum Pump – Delivers consistent vacuum for reliable valve function

Wiring Harness Options – Choose from a reversible cigarette lighter power adapter or a length of wire for custom hardwiring

High-Quality Vacuum Hose – Durable, leak-resistant construction for long-lasting performance

Remote Controllers – Compact fobs for easy operation from inside or outside the vehicle

Features:

Instant open/close control for exhaust valves

Operates completely independent of factory electronics

Universal compatibility with vacuum-actuated valve systems

Ideal for both aftermarket and factory exhaust setups

From stealthy early-morning starts to unleashing your exhaust’s full roar on demand, the ECS Remote Vacuum Exhaust Valve Control Kit gives you total control over your car’s voice—whenever and wherever you want it.

Among the many reasons enthusiasts flock to the S58 is its unmistakable exhaust character. BMW’s twin-turbocharged inline-six delivers a fierce, motorsport-inspired snarl at wide-open throttle—yet the factory mid-section muffles much of that personality. The stock resonator and restrictive flow path tame the soundtrack, muting the aggressive tone your G8X M3/M4 is capable of producing.

Turner Motorsport set out to change that. Their Resonator Delete transforms the factory system with a direct bolt-on mid-section engineered to free both sound and performance. By removing the bulky OEM resonator, integrating a true x-pipe, and shedding roughly 5 lbs of unnecessary weight, this upgrade enhances exhaust scavenging, sharpens throttle response, and unleashes a deeper, more engaging tone. Best of all, it retains full compatibility with the OEM downpipes and valved rear muffler—delivering a noticeable sound improvement while preserving factory functionality and easy reversibility.

Features:

Deeper, more aggressive exhaust note with added character and minimal drone

X-pipe design promotes efficient exhaust scavenging for improved flow

Maintains OEM valved muffler operation for factory refinement

Approximately 5 lb weight reduction vs. the stock center resonator

Brushed 304 stainless steel construction with clean TIG-welded seams

Design:

1.25 mm-wall brushed 304 stainless steel tubing

76.2 mm (3") diameter

304SS sleeve-style and Accuseal clamps with slip-joint adjustability

Installation:

Installation is as easy as cutting your factory exhaust, raising the new center resonator delete into position, and clamping. Click HERE for Installation Instructions. Product Development:

Our Resonator Delete/X-Pipe was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Upgrade your exhaust system with the Downpipe To Cat-Back Reducer.

Engineered for optimal performance and durability, this reducer allows for seamless connection between your downpipe and cat-back exhaust system. Its high-quality construction ensures a tight seal, reducing exhaust leaks and enhancing overall exhaust flow. With easy installation and compatibility with various exhaust systems, this reducer is a must-have for any performance enthusiast.

• Allows for seamless connection between downpipe and cat-back exhaust
• High-quality construction for durability
• Tight seal reduces exhaust leaks
• Enhances overall exhaust flow
• Easy installation and compatibility with various exhaust systems

Achieving precise exhaust fitment can be tricky—especially when the exhaust hanger has room to slide. This movement can cause annoying rattles or even lead to contact with the underbody or rear bumper. The ECS Tuning Exhaust Locking Collar offers a simple and effective fix. Designed to clamp securely around the exhaust hanger, this collar keeps everything firmly in place, eliminating unwanted movement.

Crafted from high-strength 6031 billet aluminum and finished in a sleek black anodized coating, it delivers both durability and corrosion resistance. With this collar in place, your exhaust stays exactly where it should—no rattles, no surprises.

Product Design:

Made from precision machined 6061 aluminum Black anodized finish Stainless steel M5 X 0.8mm hardware Installation & Support:

Install the locking collar around your exhaust hanger, position the hanger in place, and snug the locking collar down in place against the hanger! ECS Exhaust Hanger Locking Collars are available for 10mm and 12mm exhaust hangers. Please measure your hangers before ordering. The 12mm locking collar can be found HERE.