BMW Intake Parts for BMW G80 M3 S58 3.0L

Turner Gloss Carbon Fiber Cold Air Intake - G80 G82 G87 M2/M3/M4 S58 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:13036529

Part#: 013859LA10

In Stock

Sale - Save 5% $ 2,002.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,894.00 USD

Add to Wish List

Qty

Sale - Save 5%

$ 2,002.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,894.00 USD

Add to Wish List

At Turner, all our Carbon Fiber Intake Systems are top-of-the-line custom-engineered products that we develop in house. Our G8x Intake is no exception. Turner Carbon Fiber Intakes start with a 3D scan of the factory intake and engine bay. Our engineers use these 3D images of the chassis to design the intake in SolidWorks modeling software. Using a Flow Bench, our Intake is then airflow tested against the factory intake, to ensure optimal airflow improvement against stock. The final product is a beautiful and functional Carbon Fiber Intake, CAD designed for perfect integration with the OEM inlet ducting and stock mounting locations and proven to flow better than factory.

Our G8x carbon fiber airbox sport entirely carbon fiber construction, with a removable carbon fiber lid for easy air filter access. Our enclosed carbon fiber intake systems are also proven to lower intake temps vs. open filter intakes. Plus, they further enhance the appearance of the engine bay, by adding more beautiful carbon fiber. The carbon airbox and lid is manufactured using 2X2 twill weave carbon fiber and protected with a gloss finish clear coat for UV resistance. The Best part? The airbox mount in the stock location with all supplied hardware included.

The oval intake tube design matches the OE look, allowing the intake to be used with the factory structural brackets that the intake goes through. However, the cross-sectional area of the Turner Carbon Fiber intake tube is greater than the stock intake tube, with a smooth interior for even better flow. The carbon intake tube is manufactured using 2X2 twill weave carbon fiber, and the intake tube is protected by a gloss finish clear coat for UV protection.

With the oval design of the intake tube, the custom air filter had to be designed for this intake system. The air filter is specially designed to seal against the carbon fiber airbox, eliminating any opening for hot air to enter the airbox! We created a conical hi-flow reusable air filter; featuring 8 ply oiled cotton gauze construction to maximize filtration efficiency. This filter features a Bellmouth (velocity stack) filter flange inlet to reduce turbulence in order to maximize flow.

Overall, the less restrictive intake design allows for more flow to the engine. The Drivers side Stock intake flows 336.2 CFM @ -15 inH20. The Drivers side Turner intake flows 374.3 CFM @ -15 inH20. This is about a 12% increase over stock The Passenger side stock intake flows 274.2 CFM @ -15 inH20.The Passenger side Turner intake flows 296.3 CFM @ -15 inH20. This is about an 8% increase over stock. Flows over 10% more air than factory intake system!

Our G8x M2/M3/M4 Carbon Fiber Intakes not only look great but they also really perform. Transform your vehicle's performance and appearance today!

Features:

Carbon fiber airboxes and intake tubes, with gloss clear coat for UV protection
CAD-Designed for perfect Integration
Includes Turbo Inlets
Custom high flow air filters specially designed to seal against the carbon fiber airboxes, eliminating any opening for hot air to enter the airboxes.
Key Benefits:

- CAD designed Intake System for perfect integration with the OEM inlet ducting and stock mounting locations.

Carbon Fiber Intake Tubes
- Carbon fiber intake tubes replace factory plastic turbo inlet pipes. The carbon tubes feature a smoother interior without corrugations for increased flow.

- The integrated carbon flange allows secure mounting of the tubes to the carbon air boxes.

- The intake tubes are manufactured using 2x2 twill weave carbon fiber for a great look in the engine bay.

- The inlet tubes are protected by a gloss finish clear coat for UV protection.

- The carbon intake tubes are connected to the turbo by a 4-ply reinforced silicone coupler and 6061-T6 black anodized aluminum flange that utilizes the factory o-ring and retaining clip.

Air Boxes
- Carbon fiber airboxes are manufactured using 2X2 twill weave carbon fiber and protected with a gloss finish clear coat for UV resistance to match the intake tube.

- Air box mounts in stock location with supplied hardware.

Air Filter
- Conical hi-flow reusable air filter; featuring 8 ply oiled cotton gauze construction to maximize filtration efficiency.

- Bellmouth (velocity stack) filter flange inlet to reduce turbulence in order to maximize flow.

Performance:

- The less restrictive intake design allows for more flow to the engine.

Drivers side Stock intake flows 336.2 CFM @ -15 inH20.

Drivers side Turner intake flows 374.3 CFM @ -15 inH20.

This is about a 12% increase over stock

Passenger side stock intake flows 274.2 CFM @ -15 inH20.

Passenger side Turner intake flows 296.3 CFM @ -15 inH20.

This is about an 8% increase over stock

Show More Show Less

aFe Restore Kit for Pro5R Oiled Filters

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1943

Part#: 55-10460

In Stock

$ 21.00 USD

Add to Wish List

Qty

$ 21.00 USD

Add to Wish List

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

Show More Show Less

Rein Cloth Braided Fuel/Vacuum Hose - Black - 5 Meter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:378470

Part#: N203531-5

Ships in 1-2 days

$ 80.05 USD

Add to Wish List

Qty

$ 80.05 USD

Add to Wish List

Replace your cracked or frayed fuel or vacuum lines. 3.5mm ID

Black Carbon Intake System - V2 - Gloss - G8X M2 / M3 / M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21670135

Part#: EVE-G8XMV2-CF-IN

Ships in 9 Business Days

$ 2,995.00 USD

Add to Wish List

Qty

$ 2,995.00 USD

Add to Wish List

Eventuri was founded by true enthusiasts who had a shared passion for cars and performance. Engineers that had a background in Aeronautics as well as automotive tuning. After experiencing disappointment time and time again from the claims set forth by the automotive aftermarket, they set out to raise the bar. Their goal was to set a new benchmark for intake design providing true gains, not just "claims." The G8X M3/M4 intake system is one of their most ambitious intake systems to date. It features sealed filter housings to maintain a more steady IAT, even while stationary. The new ducts which seal the housings, coupled with our scoops ensures unrestricted airflow whilst maintaining low IATs through cold air saturation. Every detail was taken into account to ensure that they created a flagship intake to set a benchmark for this platform. From the scoops to the ducts to the intake tubes – Eventuri has developed a “complete solution” to ensure a smooth inlet track with cold air saturation. With a carbon weave to match the OEM M Performance carbon – this truly is a new benchmark. The filter housings are positioned with the openings sealed against the carbon ducts. These ducts have been designed to fit over the stock cold air ducting channels and direct ambient air into the filters. These ducts seal the openings of the filter housings and prevent heated air from entering the filters. Box Includes: 2 Carbon Fiber Venturi housings 2 High Flow Gen 2 Filters 2 enlarged, dimpled turbo inlets Left Side Carbon Tube with integrated MAF sensor mount Right Side Carbon Tube with integrated MAF sensor mount 2 Carbon Fiber Sealed Intake Ducts 2 Carbon Fiber Front Scoops Laser Cut Stainless Steel Brackets High quality Silicon couplers with BMW specification hose clamps

Show More Show Less

CSF High Performance Front Mount Heat Exchanger - BMW G80 M3 G82/83 M...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:8741223

Part#: 8215

In Stock

$ 729.00 USD

Add to Wish List

Qty

$ 729.00 USD

Add to Wish List

Arguably one of the hottest German performance vehicles of the decade, the G8X M3/M4 has quickly become a favorite among enthusiasts and race teams alike. Like most BMWs, the S58 motor has some serious heat issues under heavy driving conditions. CSF has been working tirelessly for the last year on a complete suite of industry-leading cooling products for the G8X platform. Now, with over 9 months of development and testing, CSF is pleased to announce the release of its highly anticipated high-performance G8X M3/M4 Heat Exchanger (CSF #8215) for both 6-Speed Manual (6MT) & ZF8 Automatic Transmissions. When the new M3/M4 was released in late 2020, it didn’t take long to see them hit the track. CSF’s Engineers and Motorsports department was in attendance for some of the first track days that local R&D Partners & Premier Dealers Studio RSR and Art of Attack took their new G8Xs to. The results were not all that surprising. Similar to the 2nd Gen B58 cars (A90 Supra & BWM G2X), the S58 had major issues with heat soak. This overheating of the intercooler system causes a large spike in Intake Air Temperatures (IATs). Subsequently, the ECU started pulling timing which decreases power output. In extreme cases, this can also send the car into limp mode. This problem became even more prevalent as testing continued into the hot summer months. CSF’s industry-leading reputation and deep knowledge of high-performance BMW cooling systems allowed its engineers to immediately identify the cooling weak spots on the S58 engine. The engine is very similar to the B58 in the A90 Supra and G-Series BMW 40i models. Both feature a liquid-to-air charge cooler manifold paired with a front mount heat exchanger (water radiator). The Heat Exchanger cools the fluid cycling through the charge cooler, dissipating heat from the system. Because the charge cooler is built into the manifold, it’s extremely expensive to replace with a high-performance unit. While CSF has developed a high-performance billet charge-air manifold for the S58 Motor (CSF #8233), the heat exchanger is still the most cost-effective way to bring down charge-air temps. The Front Mount Heat Exchanger is responsible for removing heat from the chair-air cooling system and is now recommended as a critical bolt-on upgrade. The CSF Heat Exchanger features a 2-Row (vs OEM single row) Core that is 42mm thick with CSF’s Exclusive B-Tube Technology. Increasing the size of the core and end tanks adds to the overall volume of the system which helps absorb more heat. The more efficient core not only helps dissipate more heat from the system, but also provides better airflow into the radiator that sits behind the heat exchanger. For vehicles equipped with the ZF8 Automatic Transmission, the heat exchanger core specifications were design concurrently with CSF’s new Race-Spec Dual Core Transmission Oil Cooler (CSF #8221 – coming soon) Features & Specifications: Significantly Reduces Intake Air Temperatures (IATs) for Maximum Performance (with Faster Heat Soak Recovery) Improves Air Flow to the Rest of the Cooling System for Lower Engine Coolant and Engine Oil Temperatures 2-Row, 42mm Ultra-High-Performance Core 6.5mm Tall Multi-Louvered Fin with CSF’s Exclusive B-Tube Technology CNC Machined Mounting Brackets and OEM Style “Quick Connect” Inlet/Outlet 100% All Aluminum TIG-Welded Construction Includes Black Rock Guards (upper and lower) & Transmission Cooler Mounting Kit Upper and Lower Rock Guards for Manual Transmission Upper Rock Guard and Transmission Cooler Mounting Kit for ZF8 Auto True Plug-and-Play “Drop-in Fit” Installation Requires Absolutely No Modifications 2-Year Limited Warranty 1-Hour “Mirror Finish” Hand Polish Tested and Proven by CSF’s Global Network of R&D Partners, Including Leading Time Attack Teams, Tuners, and Turbo Kit Manufacturers Applications: 2021+ BMW G80 M3 (incl. Competition) – 6MT & ZF8 Auto 2021+ BMW G82/G83 M4 (incl. Competition) – 6MT & ZF8 Auto OEM Part Number: BMW: 17-11-8-095-283

Show More Show Less

Dinan High Flow Drop-In Replacement Filters - BMW G80 G82 G83 G87 S58...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:32516359

Part#: D401-0047

In Stock

11% off MSRP $ 103.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 92.19 USD

Add to Wish List

Qty

11% off MSRP

$ 103.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 92.19 USD

Add to Wish List

Dinan High Flow Drop-in Replacement Filters are a direct upgrade to your factory intake system and will instantly provide better flow to assist your engine in achieving maximum performance and efficiency! While factory paper filters function admirably, they can be restrictive to performance goals given the material used. They also require being replaced numerous times during the lifespan of the vehicle which can add up to a substantial amount in maintenance costs. Limited performance and increased maintenance costs are never ideal but can be resolved effectively and economically in the case of filters. Dinan High Flow Drop-in Replacement Filters are constructed of 4 layers of cotton gauze that allow better flow and less pressure drop than the stock media. This equates to the engine not needing to work as hard to make the same or more power. Additionally, the use of oiled cotton media means that the Dinan filters are washable/reusable while still retaining excellent filtration and ensuring your engine runs clean for the duration. When upgrading to a complete Dinan intake system for best performance, is not available, possible, or within the budget, Dinan High Flow Drop-in Replacement Filters have you covered! Features & Benefits: Less restrictive and better flowing than stock allowing maximum engine performance and efficiency Direct replacement for stock air filter 4 layers of proprietary high flow oiled cotton gauze material for exceptional filtration Washable and reusable for the life of the engine Quick and easy installation

Show More Show Less

Universal High Flow Performance Air Filter - Dry (2.5" inlet) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:47644942

Part#: 003675ECS03-02

In Stock

Sale - Save 30% $ 56.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.89 USD

Add to Wish List

Qty

Sale - Save 30%

$ 56.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.89 USD

Add to Wish List

Universal High-Flow Air Filter

Give your engine the airflow it deserves with this reusable, high-performance air filter—perfect as a direct replacement for an ECS intake system or as the finishing touch for your custom intake project.
Dimensions: 4.5" Base OD Ã¢â‚¬Â¢ 6" Filter Height Ã¢â‚¬Â¢ 3.5" Top OD

Upgrade from your restrictive factory filter to an ECS Tuning High-Flow Dry Air Filter and let your engine breathe freely. Improved intake flow enhances power throughout the rev range while helping maintain efficient fuel economy.

Oiled vs. Dry Filters — Which Is Right for You?

Oiled Filters

Offer slightly higher airflow for maximum performance

Require more frequent cleaning

Must be re-oiled after each cleaning

Long-term reusable design saves money over disposable paper filters

Dry Filters

Provide excellent airflow with minimal maintenance

Easily cleaned with warm, soapy water—no oiling required

Still flow significantly better than OE paper filters

Fully reusable and cost-effective

Both versions deliver superior performance over stock filters while offering the long-term benefit of reusability. Choose the option that best fits your maintenance style and performance goals.

Show More Show Less

Rein Silicone Vacuum Hoses - Blue - 5 Meters (3.5mm ID)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:379090

Part#: 11731259996-5

In Stock

$ 38.99

This product was last offered at the strikethrough price on
03-17-2026

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

This silicone hose has an inner diameter of 3.5mm and outer diameter of 7.5mm, is blue in color, and arrives in a 5 Meter section that can be cut down to size.

Dinan Carbon Fiber Cold Air Intake - Gloss - G80 M3, G82/83 M4, G87 M...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:13069367

Part#: D760-0063

In Stock

11% off MSRP $ 1,968.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,749.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,968.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,749.99 USD

Add to Wish List

With the most potent BMW inline-6 to date, the S58, the newest iteration of the M3 has set itself apart from its predecessors; given the option for AWD, a model first, the M3 breaks boundaries long maintained by the quintessential brand icon. Being the signature chassis Dinan modifies, development on the G8x needed to similarly raise the bar and distinguish itself from the pack; a difficult task but one we relished the opportunity to embark upon. After months of comprehensive design and validation, that journey has come to its conclusion for the first of those ambitious aspirations - the Dinan G8x Carbon Fiber Cold Air Intake. Equal parts function, sound, and beauty, the intake not only looks and sounds the part of something special but performs the part as well. With a 12% increase in airflow to the engine without any negative effects on inlet temperatures or pressure, the Dinan G8x system delivers on all fronts. Drawing in more unimpeded air for consumption yields more efficient turbos (less work to make the same power) with the capacity for greater power potential on modified builds. Central to the design and our obsessive-compulsive need for a symmetrical engine bay is a singular plenum that replaces the separated driver and passenger intake ducting on the stock setup. The combination of the two tracks into one enlarged and distinctive shared pathway allows 50% more volume to be achieved in this tight space in addition to simplifying the installation and improving the overall look. The center plenum gives way to enlarged airboxes that house 11% larger cotton air filters delivering superb filtration while maximizing flow. Feeding the filters are the factory grill inlets as well as additional cutouts on the top of each airbox lid. The semi-open design was analyzed extensively to ensure that these additional inlets had no ill effect on temperatures or flow. However, the secondary airbox passages do allow an avenue for the induction soundtrack to escape the confines of its former plastic prison for everyone's benefit. Whether under hard acceleration, deceleration, or just spooling the amplified sounds are sure to make an impression. Beyond improvements to flow and sound, the appearance of the Dinan G8x M2/M3/M4 intake system is unrivaled. One need not do more than take a casual glance to know that care was taken with the system to blend in naturally with the factory engine bay while sufficiently augmenting it to a tier above. Playing off the hard angular edges that are present throughout, the Dinan intake system carefully takes these queues and carries them throughout for a true OEM+ look and feel. A 2x2 twill carbon fiber weave is used throughout and available in either gloss or matte - a first for Dinan, further setting the intake apart from those that came before. Features: Reduced intake restriction for Increased turbo efficiency with greater power potential on modified builds More robust and aggressive induction soundtrack Improved throttle response More Flow: 12.4% increase over stock system (Stock: 815 CFM, Dinan: 916 CFM @ 28" H2O). Larger volume air boxes (26% larger than stock) and tubes/plenum (50% larger than stock) allowing an increased volume of air to be utilized 11% increase in filter area (stock: 65in², Dinan: 72in² per side) for optimum flow Multiple finish options: Available in 2x2 Gloss or Matte Twill Carbon (Gloss Twill shown) Bolt-on installation NOTE: OEM M4 CSL strut brace is not compatible with the Dinan intake.

Show More Show Less

K&N Aerosol Air Filter Cleaning Kit -

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
This item is classified as Hazardous Materials and requires special shipping and handling. We cannot ship this item out of the US or with priority shi

T#:401641

Part#: 99-5000KT

In Stock

$ 24.00

This product was last offered at the strikethrough price on
06-08-2026

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

K&N Aerosol Air Filter Cleaning Kit provides a simple and effective solution to preserve and maintain your K&N air filter, ensuring it delivers optimal performance for a lifetime. This cleaning kit is specifically designed to clean and restore the airflow efficiency of your reusable air filter, saving you money by eliminating the need to purchase replacement filters.

The K&N Aerosol Air Filter Cleaning Kit includes a powerful degreaser that effectively removes dirt, grime, and contaminants from your air filter. Once cleaned, the kit’s specialized oil is used to recoat the filter, ensuring it continues to trap harmful particles while allowing maximum airflow.

Regular maintenance with this kit not only extends the life of your air filter but also enhances your engine’s performance by maintaining high air flow and exceptional filtration. Easy to use, the K&N Aerosol Air Filter Cleaning Kit is an essential tool for keeping your air filter in top condition.

Lifetime filter maintenance: Extends the lifespan of your K&N air filter, eliminating the need for replacements.
Improved engine performance: Restores airflow efficiency for optimal engine operation.
Cost-effective solution: Saves money by allowing you to maintain your existing air filter.
Easy application: Simple-to-use aerosol spray for cleaning and re-oiling.

Show More Show Less

Eventuri Filter Cleaning Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:396394

Part#: EVE-FLC

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

This filter cleaning kit powers away dirt and contaminants leaving your filter in like-new condition.

aFe Power Momentum GT Cold Air Intake System - Pro 5R Filters - BMW G...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7953039

Part#: 50-70083R

In Stock

$ 842.99

This product was last offered at the strikethrough price on
01-28-2026

$ 784.00 USD

Add to Wish List

Qty

$ 784.00 USD

Add to Wish List

Features a custom CAD-designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. This system uses a high-quality plastic CAD-designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Dyno-Proven Gains up to +13 HP & +15 Lbs. x Ft. TQ Outflows Factory Intake by 43% Measured Flow: 670 CFM @ 7” H20 Washable and Reusable Pro 5R Air Filters for Maximum Performance Clear Sight Windows for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Large Five Layer Performance Air Filters: The 6-1/2” tall 360-degree radial flow air filters feature a 3-1/2” round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best for street and track use. Unique One-Piece Housings: The smooth one-piece sealed housings, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. Large, clear sight windows allow for hassle-free filter inspection, without having to disassemble your system. Dyno-Tuned Intake Tubes: This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Made from XLPE material and high-performance silicone, the intake tubes provide heat-soak resistance and extreme durability. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Fitment Note: This item is designed to fit models equipped with the factory strut brace, with no modification required. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

K&N Replacement Air Filter Set - BMW G8X M3 M4 S58 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14551897

Part#: 33-3171

In Stock

$ 104.99

This product was last offered at the strikethrough price on
03-16-2026

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product! Designed to increase horsepower Washable, reusable, and engineered to last for the life of your vehicle Designed to provide high airflow and exceptional filtration Engineered to fit easily into your factory air box No-Hassle Lifetime Limited Warranty Only needs cleaning every 50,000 miles under normal highway driving conditions Emissions legal in all 50 States Will not void vehicle warranty Specifications: Air Filter Shape: PanelAir Filter Material: Cotton Gauze Washable: Yes Height: 1.125 in (29 mm) Outside Length: 10.188 in (259 mm) Outside Width: 9.5 in (241 mm) Package Contents: 2 Air Filters Package Quantity: 2 Warranty: 1,000,000 Miles/10 Year

Show More Show Less

Universal Throttle Body Coupler - 45 Degree 2.5" (63.50mm) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:382969

Part#: 003402ECS03A-16

In Stock

Sale - Save 40% $ 38.99

This product was last offered at the strikethrough price on
05-02-2026

$ 23.39 USD

Add to Wish List

Qty

Sale - Save 40%

$ 38.99

This product was last offered at the strikethrough price on
05-02-2026

$ 23.39 USD

Add to Wish List

Elevate your BMW project with ECS Tuning silicone couplers and elbows, providing a high-quality, precision-engineered solution for various applications. Whether you're installing an intercooler, fabricating a custom intake system, or pursuing other automotive projects, ECS Tuning delivers reliable performance and durability. Trust ECS Tuning to meet your needs and enhance your BMW project.

High-quality silicone couplers and elbows for BMW projects
Precision-engineered for reliability and performance
Versatile solution for intercooler installations, custom intake systems, and more
Ensures durability and longevity for your automotive projects

Show More Show Less

Universal 10AN ORB To 3/8" Barb

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31522993

Part#: RAD20-0530

In Stock

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Plastic Vacuum Tubing Kit - black - 8 Feet

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:360488

Part#: 5097T321-8FT-A

In Stock

Sale - Save 25% $ 36.99

This product was last offered at the strikethrough price on
05-02-2026

$ 27.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 36.99

This product was last offered at the strikethrough price on
05-02-2026

$ 27.74 USD

Add to Wish List

Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.

Key Features:

Engine Optimization: Replacing old hoses ensures the vacuum system operates at peak performance.
2.3mm Inner Diameter: Designed to meet specific engine requirements.
Black Color: Blends seamlessly with the engine components.
8-Foot Section: Provides flexibility to cut the hose to the required length.
Easy Installation: Upgrade without hassle for improved engine efficiency.

Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.

Show More Show Less

ECS S58 Performance Drop-In Filters - Oiled

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21209821

Part#: 003521LB01

In Stock

Sale - Save 51% $ 113.99

This product was last offered at the strikethrough price on
05-03-2026

$ 55.83 USD

Add to Wish List

Qty

Sale - Save 51%

$ 113.99

This product was last offered at the strikethrough price on
05-03-2026

$ 55.83 USD

Add to Wish List

Upgrade your engine's performance and efficiency by swapping out your restrictive factory air filters with the ECS Tuning Exact-Fit High-Flow Oiled Air Filter Set!

Enhanced airflow is key to helping your engine breathe more freely, leading to noticeable gains in power across the entire RPM range and improving fuel efficiency.

These reusable filters outperform stock paper filters by delivering superior airflow, instantly boosting your vehicle’s performance. Designed as a straightforward upgrade, they fit directly in place of your OEM filters. Highlights:

Direct OEM replacement Increased airflow compared to stock filters Fully reusable design Requires cleaning only every 50,000 miles under standard highway conditions Don’t forget to explore our complete range of filter-cleaning products to keep your filters in top shape!

*Note: For vehicles equipped with MAF sensors, ensure that the filter oil has fully dried before installation to avoid potential damage to the sensor and the possibility of triggering a check engine light.

Show More Show Less

S58 Charge Pipe Kit - G80 G82 G83 G87 F97 F98

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14916012

Part#: 003174LB01

Ships in 1-3 days

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

If you plan on turning up the boost on your car these charge pipes are a must-have! Full aluminum charge pipes ready to install in factory location.

S58 equipped cars are an absolute weapon on the road and track. Although BMW has upgraded their charge pipe design they are no match for the upgraded FTP charge pipes.

In years past the BMW charge pipes were made from flimsy plastic that ended up failing rather quickly and/or blowing apart due to the constant heat cycling in the engine. For the S58 BMW stepped it up a notch with a combination of rubber piping with aluminum flanges. The issue with the rubber hoses are that they can expand and contract which allow for fluctuating pressure and over time, failure. When upgrading to the full aluminum charge pipes you get a constant hold of pressure to keep your turbos, engines, and computer happy with consistent pressure.

The FTP charge pipes come with all the necessary o-rings, clamps, flanges, and oem mounting for a direct and simple installation.

Features and benefits:

Upgraded aluminum that wont expand under pressure
Smooth flow path
Durable black powder coat
OE mounting for DIRECT FITMENT
Clips, flanges, seals included for installation

Show More Show Less

K&N Air Filter Recharge Kit - Aerosol

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
This item is classified as Hazardous Materials and requires special shipping and handling. We cannot ship this item out of the US or with priority shi

T#:401640

Part#: 99-5000

In Stock

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Preserve & maintain your air filter for a lifetime like it was designed to be used

DO88 - Charge Cooler Manifold, BMW M2 M3 M4 G80 G82 G87 (S58) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:35121138

Part#: ICM-450-K

Ships in 10 Business Days

$ 2,626.99 USD

Add to Wish List

Qty

$ 2,626.99 USD

Add to Wish List

DO88 - Charge Cooler Manifold, BMW M2 M3 M4 G80 G82 G87 (S58)

The DO88 Charge Cooler Manifold for BMW M2, M3, and M4 models (G80, G82, G87) equipped with the S58 engine provides a powerful upgrade for performance enthusiasts. Designed to improve airflow and reduce heat soak, this charge cooler manifold ensures consistent power output during heavy acceleration and high-speed driving, enhancing both engine performance and longevity. Turner Motorsport’s offering of the DO88 manifold brings advanced cooling technology to your BMW, combining reliable performance with easy installation.

Key Benefits:

Optimized Cooling Performance: Reduces heat soak to maintain peak power and consistent performance
Increased Power Output: Boosts horsepower and torque by efficiently managing engine temperatures
Durable Construction: Made from high-quality materials to withstand extreme temperatures and extended use
Perfect Fit for S58 Engines: Specifically engineered for BMW M2, M3, and M4 models with the S58 engine platform
Easy Installation: Direct-fit design simplifies installation, suitable for both professionals and DIY enthusiasts

With the DO88 Charge Cooler Manifold, BMW drivers can experience improved engine efficiency and reliability, making it the ideal choice for those looking to maximize their vehicle's performance on the road or track.

Show More Show Less

BMC Performance Air Filter - Set - G80/G82 M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2393417

Part#: FB01118

In Stock

$ 207.99 USD

Add to Wish List

Qty

$ 207.99 USD

Add to Wish List

BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.

BMC Filter Cleaning Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Mishimoto Performance Charge Pipe Kit - G8X M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:16441588

Part#: MMICP-G80-21

In Stock

$ 764.99 USD

Add to Wish List

Qty

$ 764.99 USD

Add to Wish List

The Mishimoto G8X M3/M4 performance charge pipe replaces the stock rubber and plastic with robust silicone and cast aluminum for a charge pipe that's stronger and 27% less restrictive than stock. Our charge pipe retains the flexibility of the stock front section but replaces the stock rubber hoses with durable silicone for greater heat and pressure tolerance. The plastic merge has been replaced with cast aluminum for a significant durability upgrade, while the transitions have been smoothed to allow improved flow to support future performance upgrades. This performance charge pipe is a direct fit for your 2021+ BMW G8X M3/M4 and is backed by our Mishimoto Lifetime Warranty for a lifetime of letting your legend breathe free. So, if you're ready to unleash the limitless potential of your M3 or M4, this Mishimoto performance charge pipe is for you. This kit includes: (2) Aluminum Charge Pipes (2) CNC Adapters (1) Aluminum Spacer (5) Rubber Grommets (3) Silicone Couplers (6) High-Torque Worm Gear Clamps Mounting Hardware Installations Instructions HERE

Show More Show Less

Rein Silicone Vacuum Hoses - Black - 5 Meters (3.5mm ID)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51848535

Part#: 51731257971-5M

In Stock at Vendor

$ 38.66 USD

Add to Wish List

Qty

$ 38.66 USD

Add to Wish List

This silicone hose has an inner diameter of 3.5mm and outer diameter of 7.5mm, is black in color, and arrives in a 5 Meter section that can be cut down to size.

Genuine BMW T-Map Sensor - 13628637900

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:222870

Part#: 13628637900

Ships in 3 Business Days

9% off MSRP $ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 147.99 USD

Add to Wish List

Qty

9% off MSRP

$ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 147.99 USD

Add to Wish List

Rough idling and slow acceleration are 2 common signs of a failing Tmap sensor. Take the time to replace this to get your car running at 100% again.

Pro Dry S Restore Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:18766692

Part#: 90-10601

In Stock

$ 21.00 USD

Add to Wish List

Qty

$ 21.00 USD

Add to Wish List

Silicone Coupler - Straight 3 5/8" (92mm)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:377483

Part#: 003402ECS01A-07

In Stock

Sale - Save 40% $ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 23.99 USD

Add to Wish List

Qty

Sale - Save 40%

$ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 23.99 USD

Add to Wish List

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

Enhances vehicle performance
Durable construction for long-lasting reliability
Specifically designed for BMW vehicles

Show More Show Less

T-Map sensor

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27105159

Part#: 13628637900

In Stock

Sale - Save 21% $ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD

Add to Wish List

Qty

Sale - Save 21%

$ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD

Add to Wish List

Forge Motorsport Valve Service Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28271173

Part#: FMDV004S

In Stock

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

S58 Charge Air Cooler Manifold - Raw Finish - G80/G82/G83 M3/M4, G87 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:13891865

Part#: 8233

In Stock

$ 6,599.00 USD

Add to Wish List

Qty

$ 6,599.00 USD

Add to Wish List

An absolute must-need for anyone with a high-horsepower S58 build. ~30°F reduction of Intake Air Temperatures (IATs) compared to OEM. Includes everything you need, plug and play!

Dinan Foundation Package - BMW G8X M3 M4

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:32814619

Part#: G8X-M3M4-F-GBKT

In Stock

$ 4,022.99 USD

Add to Wish List

Qty

$ 4,022.99 USD

Add to Wish List

Foundation packages represent the most direct path to increased power while retaining drivability and safety. The combination of Dinan modifications work harmoniously with one another and offer a balanced blend of enhanced engine efficiency, improved acceleration and increased power to go along with a tasteful high-performance look and unmistakable Dinan sound. Whether you start with the base Foundation package that includes the core hardware building blocks (intake and exhaust), or opt for packages that further enhance your vehicles power output and abilities you will be well on your way to an elevated experience. WHY GET A PACKAGE? We understand the building a modified car in stages is often preferred for various reasons. Not knowing how deep into the modification journey you may go or simply for financial reasons are common justifications for a measured approach. However, often when building in stages, parts are mixed and matched that were not designed to interact with one another which can lead to sub-par results and unhappiness with a vehicle you should be enjoying. By purchasing and installing popular curated packages of parts that were all designed to work with one another you bypass these common faults and receive a complete solution you can enjoy to the fullest from day one. As a bonus, a 10% discount is applied to package purchases compared to buying the same components a la carte. WHAT'S INCLUDED IN THE BASE G8x M3/M4 FOUNDATION PACKAGE (F)? Dinan Carbon Fiber Cold Air Intake (D760-0063) for increased flow, efficiency as well as underhood visual appeal Dinan Free Flow Axle-Back Exhaust w/ Black Tips (D660-0093-BLK) and corresponding X-Pipe (D660-0094) for maximum aural pleasure Features: Maximum gains of +6 HP and +5 lb-ft of torque (Exhaust) Smoother, louder and sportier sound (Exhaust + X-Pipe) Computer controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonators between the secondary catalysts and rear muffler for increased volume (X-Pipe) 11-pounds lighter than the stock (Stock: 66-pounds vs. Dinan: 55-pounds) (Exhaust + X-Pipe) Reduced intake restriction for Increased turbo efficiency with greater power potential on modified builds (Intake) More robust and aggressive induction soundtrack (Intake) Improved throttle response (Intake) 7 points towards the illustrious Dinan deck lid badge

Show More Show Less

Mishimoto Performance Heat Exchanger - Automatic Transmission - BMW G...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21209832

Part#: MMHE-G80-21AT

In Stock

$ 752.99 USD

Add to Wish List

Qty

$ 752.99 USD

Add to Wish List

Introducing the Mishimoto 2021+ BMW G8X M3/M4 performance heat exchanger, the ultimate solution to keep your charge air cool under the most demanding conditions. In the world of forced induction vehicles, air-to-water intercooling is the future, and Mishimoto are taking it to the next level. We started from scratch, leaving no room for compromise. Our design eliminates all plastic components, replacing them with durable aluminum end tanks, core, and CNC-machined ports. TIG-welded for maximum strength and longevity, this heat exchanger will withstand even the harshest conditions. We took it further by incorporating strutted tubes within the core, adding unparalleled resistance against bowing and flexing during aggressive cornering. But strength is not our only focus. We've increased the core volume by 23 percent and expanded the external fin surface area by 44 percent. Combined with our dual-pass flow configuration and louvered fin design, this performance heat exchanger vastly improves cooling capacity over stock, enhancing overall performance. Rest assured, the Mishimoto Performance Heat Exchanger for the 2021+ BMW G8X M3/M4 is designed to fit perfectly with all other factory components, ensuring seamless integration into your vehicle. For added protection, we include steel rock guards to shield the heat exchanger from debris and prevent punctured tubes or crushed fins. The Mishimoto G8X M3/M4 performance heat exchanger fits both automatic and manual transmissions. The Mishimoto 2021+ BMW G8X M3/M4 performance heat exchanger comes with our renowned Mishimoto Lifetime Warranty, giving you peace of mind and confidence in your investment. Upgrade your BMW G8X M3/M4 with the Mishimoto Heat Exchanger and experience the true power of cooling efficiency. Features: Direct fit for the 2021+ BMW G8X M3/M4 23 percent increase in core volume improves cooling capacity 44 percent increase in external fin surface area for greater heat transfer Dual-pass design for maximum cooling Strutted tubes incorporated in core for maximum durability CNC-machined inlet and outlet for leak-free running Includes removable steel rock guards for additional durability Mishimoto Lifetime Warranty Includes: (1) Performance Aluminum Heat Exchanger (1) Upper Rock Guard (1) Lower Rock Guard (MT Only) (1) Hardware Pack Mishimoto Lifetime Warranty

Show More Show Less

High Performance Drop-In Air Filter Upgrade - Black - S58 G80, G82, G...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5802145

Part#: VTT-S58-FILTER-B

In Stock

$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.99 USD

Limited Qty Sale

Add to Wish List

Features: 50 States Emissions Legal Easy to install 15-30 minutes even for a novice Filters can be cleaned forever meaning never buy new filters Up to 13WHP gains Completely reversible if you ever want to remove VTT is proud to offer high-performance drop-in replacement filters for the 2021+ G8X M3/M4. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. On the dyno, VTT saw more than 13WHP gains with these filters and our Carbon Fiber intake Tops. These filters will also work perfectly with the stock tops. We recommend removing the pre-filter for best flow if the stock top is used. Black.

Show More Show Less

Eventuri Black Carbon Intake Scoop Set - Gloss Carbon - BMW G8X M3 M4...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AVAILABLE FOR PRE-ORDER

T#:34583148

Part#: EVE-G8XM-CF-SC

Ships in 5 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Looking to reduce IATs for greater power? Eventuri's cold air scoops for the G8x M3 and M4 platform are designed to direct ambient air into the feeds for the intake system helping to maintain consistent intake air temperatures when on the move. Crafted from prepreg carbon fiber and available in both gloss and matte finish, these scoops also provide an aesthetic enhancement to the front of the car. Designed to compliment the CSL Style grill, we have taken the angular geometry of the two sides of the grill and incorporated the same shapes on the scoops to give an integrated look. Even with the standard grill, the triangular scoop geometry compliments the lower brake duct section of the bumper to bring everything together. Eventuri's G8x M3/M4 scoops are a one-piece design that blends form and function to bring a noticeable enhancement to the M3 and M4 platform. These scoops are also compatible with both the stock and CSL-style grills. ** This item is not eligible for return **

Show More Show Less

Mishimoto Performance Intercooler - Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:17538755

Part#: MMINT-G80-21BK

In Stock at Vendor

$ 4,081.99 USD

Add to Wish List

Qty

$ 4,081.99 USD

Add to Wish List

CSF - Charge-Air-Cooler Manifold - BMW S58 “Level-Up”

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:33880015

Part#: 8233C

Ships in 4 Business Days

$ 6,995.00 USD

Add to Wish List

Qty

$ 6,995.00 USD

Add to Wish List

The CSF - Charge-Air-Cooler Manifold - BMW S58 “Level-Up” is a high-performance upgrade designed to elevate the cooling efficiency and power output of your BMW S58 engine. Specifically engineered for the BMW S58 platform, this advanced charge-air cooler manifold provides superior airflow and reduces intake temperatures, enhancing engine performance and reliability. With its precision design and top-quality construction, this manifold maximizes horsepower and torque, making it perfect for both street performance and racing applications.

Offered by Turner Motorsport, the CSF - Charge-Air-Cooler Manifold - BMW S58 “Level-Up” delivers unbeatable cooling and power gains, ensuring your BMW S58 engine operates at peak performance.

Key Benefits:

Superior cooling technology tailored for the BMW S58 engine
Optimized airflow for improved horsepower and torque
Reduced intake air temperatures, increasing engine efficiency
Precision fitment for easy installation without modifications
High-quality construction for durability and long-lasting performance
Ideal for performance upgrades and racing setups

For BMW enthusiasts looking to take their S58 engine to the next level, the CSF - Charge-Air-Cooler Manifold - BMW S58 “Level-Up” from Turner Motorsport provides the ultimate solution for enhancing power and cooling performance.

Show More Show Less

Autotecknic Dry Carbon Fiber Cooling Shroud - G8x M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5189186

Part#: ATK-BM-0701

Ships in 7 Business Days

$ 550.00 USD

Add to Wish List

Qty

$ 550.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. AutoTecknic's Dry Carbon Cooling Plate provides the G8x M3/M4 with better air induction while providing the intake and engine with cooler air during high-speed driving. It also gives your engine bay a fresh appearance. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.

Show More Show Less

BMS Elite Performance Intake with Blue Filters - G80/G82 M3/M4 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3886580

Part#: G8X-ELT-INTK-B

Ships on Jun 23, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The BMS Elite Performance Intake retains everything that's good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow 3.5" ducting and quality BMS inverted cone air filters to match.

Show More Show Less

Mishimoto Performance Intake - G80 G82

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5608771

Part#: MMAI-G80-21

In Stock at Vendor

$ 952.99 USD

Add to Wish List

Qty

$ 952.99 USD

Add to Wish List

The M3 has undergone significant evolution over the years, with each new iteration bringing something new to the table. From the brilliant widebody E30 of the eighties to the exotic sounding V8-powered E9X, each generation has its own identity but holds true to the goals of providing an amazing driving experience. The G8X gets one of the most potent engines produced by BMW to date, the S58B30, along with an option for AWD. Enhancing the S58 was something Mishimoto set their sights on soon after acquiring a G80 of their own, the first project being a performance air intake system. Features: Direct fit for 2021+ BMW G8X M3/M4 with 3.0L S58B30 Reduces intake restriction by up to 22.8% for more power potential Provides safe operation on a stock ECU tune Aggressive intake tone under acceleration Additional fresh air ducts draw cool air from wheel wells Amplifies turbocharger spool and bypass valve venting Rotational-molded airboxes and intake tubes provide optimal airflow, outstanding rigidity, and maximum heat-soak resistance CNC-machined aluminum connectors for maximum durability and a leak-free install Precision-engineered using the latest in 3D printing, CAD modeling, and flow bench technology CNC-Machined passenger-side turbo inlet improves flow and durability Installs in less than 1 hour with no need to remove the front bumper or undertray Airbox volume, shape, and construction material all play a part in delivering maximum airflow to your engine. Our engineering team created extremely precise rotational-molded thermoplastic airboxes that eliminate restrictions, supply maximum cool-air entry via two additional ports that open to the wheel wells, and improve engine bay aesthetics. The use of thermoplastic material ensures the air intake system will incur minimum engine bay heat soak and provides unmatched durability for years of service in the harshest environments. Our airboxes were designed using the latest in 3D printing, CAD modeling, and flow bench technology. As a result, we reduced air intake restriction by 13% on the driver-side intake tract and 22.8% on the passenger-side intake tract. For proper filtration, this kit includes dual high-flow oiled air filters which provide improved filter surface area and improved airflow over the stock panel filters. In addition to the flow benefits, our intake system provides a significant amplification of turbocharger spool and bypass valve venting. These enhanced sounds provide a new level of enjoyment, adding to the incredible driving experience you expect from a BMW M-Series. The Mishimoto 2021+ BMW G8X M3/M4 Performance Intake is a complete bolt-on kit and includes all necessary components for an easy installation. As with all Mishimoto products, this performance intake kit includes our signature Mishimoto Lifetime Warranty. Intake kit includes: (1) Driver-Side Intake Airbox Assembly (1) Driver-Side Air Filter, Oiled (1) Driver-Side Intake Tube Grommet (1) Driver-Side Intake Tube Coupler (1) Driver-Side CNC Quick-Disconnect Fitting (1) Passenger-Side Intake Airbox Assembly (1) Passenger-Side Air Filter, Oiled (1) Passenger-Side Intake Tube Grommet (1) Passenger-Side Intake Tube Coupler (1) Passenger-Side Aluminum Turbocharger Outlet (5) CNC-Machined Airbox Peg Kits (4) Stainless Steel Worm Gear Clamps Hardware Kit WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

BMS Drop-In Performance Air Filters - S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38621427

Part#: BMS-DAF-S58

Ships on Jun 23, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Burger Motorsports Performance S58 G8X BMW Drop-In Air Filters exceed OE standards, featuring oiled cotton media for enhanced airflow, effective contaminant filtration, and increased horsepower. These high-performance filters are washable and reusable, designed to last the lifetime of your vehicle. They easily install into your factory airboxes. Replaces OEM BMW part numbers: 🔹 Left: 13-71-8-095-807 🔹 Right: 13-71-8-095-805

Show More Show Less

S58 Charge Air Cooler Manifold - Thermal Dispersion Black Finish - G8...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:13891866

Part#: 8233B

Ships in 5 Business Days

$ 6,995.00 USD

Add to Wish List

Qty

$ 6,995.00 USD

Add to Wish List

An absolute must-need for anyone with a high-horsepower S58 build. ~30°F reduction of Intake Air Temperatures (IATs) compared to OEM. Includes everything you need, plug and play!

Eventuri BMW Black Carbon Intake System - V2 Matte - G8X M2 / M3 / M4...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20353737

Part#: EVE-G8XMV2-CFM-I

Ships in 5 Business Days

$ 2,995.00 USD

Add to Wish List

Qty

$ 2,995.00 USD

Add to Wish List

Eventuri has conducted extensive research and development to create an intake system that not only enhances the stock M2/M3/M4 but also future-proofs its capability for high-powered builds exceeding 1000hp. This comprehensive redesign, from airboxes to turbo inlets, aims to reduce pressure loss, increase flow rate, and maintain low inlet temperatures.

Eventuri maximizes available space by incorporating two custom-made filters with a 40% larger filtration area than the stock filters. These filters are housed in Patented Venturi housings, optimizing airflow to the turbo inlets. The inlets themselves have up to 160% larger cross-sectional areas than stock, featuring an advanced dimpled inner surface to minimize frictional losses and enhance overall performance.

The Eventuri Intake System includes:

2 x Carbon Fiber Patented Venturi Filter Housings
2 x Bespoke High Flow Dry Cone Filters
2 x Carbon Fiber Inlet Ducts
Carbon Fiber Intake Tube
2 Thermoplastic Turbo Inlets
Laser Cut Stainless Steel Brackets
Custom Flexible Hose
CNC Machined Bracket Mounts and Reinforcement Rings

Show More Show Less

High Performance Drop-In Air Filter Upgrade - Red - S58 G80, G82, G83...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5802144

Part#: VTT-S58-FILTER-R

Ships in 10 Business Days

$ 178.99 USD

Add to Wish List

Qty

$ 178.99 USD

Add to Wish List

Features: 50 States Emissions Legal Easy to install 15-30 minutes even for a novice Filters can be cleaned forever meaning never buy new filters Up to 13WHP gains Completely reversible if you ever want to remove VTT is proud to offer high-performance drop-in replacement filters for the 2021+ G8X M3/M4. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. On the dyno, VTT saw more than 13WHP gains with these filters and our Carbon Fiber intake Tops. These filters will also work perfectly with the stock tops. We recommend removing the pre-filter for best flow if the stock top is used. Red.

Show More Show Less

BMS Elite Performance Intake With Red Filters - G80/G82 M3/M4 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3943329

Part#: G8X-ELT-INTK-R

Ships on Jun 23, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The BMS Elite Performance Intake retains everything that's good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow 3.5" ducting and quality BMS inverted cone air filters to match.

Show More Show Less

MMX Performance Intake Pipe Set - G80 M3, G82/83 M4, G87 M2 S58 3.0L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:40714800

Part#: MMR11-1601

Ships in 3 Business Days

$ 622.99 USD

Add to Wish List

Qty

$ 622.99 USD

Add to Wish List

Unlock the full potential of your BMW M2, M3 and M4 with the MMX G8x intake pipe set, designed to deliver uninterrupted, high-velocity airflow straight to your OEM turbo inlets. Unlike the restrictive factory corrugated pipework, our constant-diameter aluminium design eliminates turbulence and ensures a smooth, unrestricted intake path for maximum efficiency. Engineered for seamless OEM fitment, our pipework integrates flawlessly with the stock airbox and turbo inlet system while removing the airflow bottlenecks at the turbo elbow joiners. Experience sharper throttle response, improved turbo efficiency, and a refined induction sound—all with a simple, high-quality bolt-on solution.

Show More Show Less

Genuine BMW Air Filter Element Replacement Kit - BMW G8X M2, M3 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:50731696

Part#: G8XAFRKT

Ships in 4 Business Days

$ 86.99 USD

Add to Wish List

Qty

$ 86.99 USD

Add to Wish List

Replaces worn or damaged air filter elements

Air Filter Element, Right

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815178

Part#: 13718095805

Ships in 4 Business Days

14% off MSRP $ 50.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.99 USD

Add to Wish List

Qty

14% off MSRP

$ 50.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.99 USD

Add to Wish List

Replace your dirty or worn air filter with a Genuine BMW element.

Air Filter Element, Left

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815176

Part#: 13718095807

Ships in 4 Business Days

14% off MSRP $ 50.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.99 USD

Add to Wish List

Qty

14% off MSRP

$ 50.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.99 USD

Add to Wish List

Replace your dirty or worn air filter with a Genuine BMW element.

Replacement Filter

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25805751

Part#: D401-0032

Ships on Jul 1, 2026

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

MST Cold Air Intake System - S58 - G80/G82 M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5269534

Part#: BW-S5801

Special Order: No Guaranteed ETA

$ 767.99 USD

Add to Wish List

Qty

$ 767.99 USD

Add to Wish List

Upgrade your stock S58 intake to the MST Performance intake system. By replacing the factory air intake systems, airflow is increased and overall temperatures are reduced. This intake features a unique design to allow for improved throttle response as well as an improved engine note. This intake system utilizes a heat shield that will help block the hot engine air, allowing the intake to deliver cooler, denser air. It includes all of the necessary hardware for installation, making it a smooth and swift process.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW G80 M3 S58 3.0L

Sub-Categories

Key Features:

DO88 - Charge Cooler Manifold, BMW M2 M3 M4 G80 G82 G87 (S58)

Key Benefits:

ECS Silicone Coupler

Key Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results