330mm MOMO MOD.78 Steering Wheel

T#:301059

Part#: TMS301059

In Stock at Vendor

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

Vorsteiner VRS Aero Front Grille (Carbon Fiber) - G8x M3/M4

T#:5122285

Part#: BMV3305

Ships on Nov 4, 2026

$ 1,295.00 USD

Add to Wish List

Qty

$ 1,295.00 USD

Add to Wish List

Carbon fiber body parts are starting to become a dime-a-dozen, but this has caused a reduction in part quality. Vorsteiner takes great care to ensure every carbon fiber component they produce is of the highest quality, putting every piece through an independent inspection process to look for any potential imperfections before they leave the facility. In addition, the high gloss clear coating applied to their carbon fiber parts is a UV ray inhibiting coating that won't discolor or peel after only a few years of sun exposure. Looking to make your G8x M3 or M4 more unique? Then this may be the perfect option for you! Vorsteiner's VRS Aero Front Grille is designed for those looking to change their front grille over to a more aggressive option. This grille is composed of durable Carbon Fiber material which comes in a glossy finish. The wide open design allows for an increase in airflow as well. *Note that this grille is not compatible with vehicles equipped with front radars.

Show More Show Less

19" APEX VS-5 Square Wheel Set - Choose Your Finish!

2X Entries Into Our F80 M3 Sweepstakes

T#:40545998

Part#: VS5191012

Ships in 5 Business Days

Starting at $ 2,156.00 USD

Add to Wish List

Starting at $ 2,156.00 USD

Add to Wish List

APEX VS-5 19x10" ET12 Square Wheel Set VS-5 maximizes the performance potential of a flow-formed wheel. It combines features typically only found on forged wheels with a premium look at an unbeatable price. Features: Iconic 5-Spoke Design Side-Milled Spokes for Reduced Weight Reinforced Inner Lip for Strength Massive Brake Clearance Ultra-Concave Face Profiles Independently Tested and Certified Unmatched Replacement Program Lifetime Structural Warranty The VS-5 brings the aggressive look of our iconic forged VS-5RS to a flow-formed wheel. At a fraction of the price of its forged sibling, VS-5 punches well above its weight and maximizes the performance potential of a flow-formed wheel. With nearly two decades of experience perfecting track-ready flow-formed wheels, we engineered the VS-5 to deliver Real Performance at an unbeatable value. With a strength-to-weight ratio and features typically reserved for forged wheels, the VS-5 pushes the boundaries of flow-formed manufacturing to the max. Weighing only ~2-2.5 lbs more than its forged sibling, the VS-5 isn’t just a top tier option in the flow-formed space, it’s a wheel we consider the last step in performance before leveling up to a forged design. Flow-forming enables us to create high-performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow-formed wheels have a higher load rating than some competitors' forged wheels. A critical part of VS-5’s remarkable weight-savings, side-milled spokes also help with its stunning looks. The VS-5 features advanced side-milled spokes that have any excess material that doesn’t add strength removed from the sides of the spokes via precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise, we believe it's essential. The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our flow-formed Evolution Line adds more material to this vulnerable area as an added layer of protection against impact from track berms, potholes, and whatever else the road may throw at you.

Show More Show Less

20x11" ET18 Anthracite APEX VS-5RS Forged BMW Wheel

2X Entries Into Our F80 M3 Sweepstakes

T#:14155782

Part#: VS5RS2011ET18AN

Ships in 6 Business Days

$ 1,029.00 USD

Add to Wish List

Qty

$ 1,029.00 USD

Add to Wish List

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: BRAND: APEX DESIGNED FOR: No WHEEL CONSTRUCTION: Forged MODEL: VS-5RS WHEEL SIZE: 20x11" ET18 WHEEL DIAMETER: 20" WHEEL WIDTH: 11.0" OFFSET: ET18 FINISH: Anthracite FACE PROFILE: Profile 4; super deep concavity BOLT PATTERN: 5x112mm CENTER BORE: 66.6mm LOAD RATING: 1,600 lbs WEIGHT: ~21.7 lbs REGISTRATION #: STL - Passed On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

Vorsteiner Aero Front Grille Mesh Set - For BMV3325 with Active Cruis...

T#:33512919

Part#: BMV3025-ABS-ACC

Ships on Nov 4, 2026

$ 165.00 USD

Add to Wish List

Qty

$ 165.00 USD

Add to Wish List

Elevate your G8X M3/M4 with the Vorsteiner Aero Front Grille Mesh Set – expertly designed for enhanced airflow, striking style, and a commanding presence on the road.

19x11" ET22 Satin Black APEX VS-5RS Forged BMW Wheel

2X Entries Into Our F80 M3 Sweepstakes

T#:18965490

Part#: VS5RS1911ET22SMB

Ships in 6 Business Days

$ 929.00 USD

Add to Wish List

Qty

$ 929.00 USD

Add to Wish List

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four ...

T#:31158762

Part#: WBFI77-E88-501

Ships on Sep 23, 2026

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

Provide a polished, high-quality look by covering the open center hole
Are machined from 6061-T5611 aluminum for superior strength and durability
Feature a hand-brushed finish for a seamless OEM appearance
Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
Are sold in sets of four, with center caps not included

Show More Show Less

MOMO START Racing seat - ALL BMW & MINI

T#:583211

Part#: 1070BLK

Ships on Sep 23, 2026

$ 485.00 USD

Add to Wish List

Qty

$ 485.00 USD

Add to Wish List

MOMO Racing seats have bee proven to not only keep you in place, but also keep you alive. FIA 8855-1999 certification, Adjustable padding configuration, and 5 belt openings mean this seat can accommodate a wide range of Motorsport. The Start seat has a classic shape with aggressive side bolstering and a more upright seating position than the Super Cup.

Show More Show Less

19" APEX VS-5RS Staggered Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:19627054

Part#: VS5RS199H102538

Ships in 5 Business Days

Starting at $ 3,236.00 USD

Add to Wish List

Starting at $ 3,236.00 USD

Add to Wish List

Forged wheels provide a weight reduction while having a stronger wheel for shaving down those lap times! 19x9 Et25/19x10 ET38 5x112 66.6CB The best wheels to come to market at an even better price. These forged Sprint Line wheels have so many benefits why would you ever buy another wheel. VS-5RS wheels start off as a blank profile made specifically by Apex wheels, with about 10,000 metric tons of pressure the aluminum starts off as a robust metal eliminating porosity and improving the structure of the wheel to start off as strong as possible. Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 2x 19x9 ET25/2x 19x10 ET38 APEX VS-5RS Forged BMW Wheels in your choice of finish! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

BMW G8X Akrapovic Tail Pipe Set - Classic Carbon Design

T#:24444445

Part#: TP-CT/68

In Stock at Vendor

$ 2,215.99 USD

Add to Wish List

Qty

$ 2,215.99 USD

Add to Wish List

BMW G8X Akrapovic Tail Pipe Set - Classic Carbon Design offers an exceptional upgrade for those seeking both performance and aesthetics. These tailpipes are crafted by Akrapovic, renowned for their high-quality engineering and stylish designs. The Classic Carbon Design adds a distinctive, aggressive look to the vehicle, combining superior craftsmanship with performance benefits.

High-Quality Craftsmanship: Engineered by Akrapovic for unparalleled durability and performance.
Distinctive Style: Classic Carbon Design provides a sleek, aggressive appearance.
Enhanced Performance: Designed to optimize exhaust flow and improve overall vehicle performance.
Easy Installation: Direct fit for BMW G8X models, making installation straightforward with no modifications required.
Premium Materials: Made from high-quality carbon fiber for both durability and lightweight performance.

Show More Show Less

Akrapovic Titanium Slip On Exhaust With Classic Carbon Fiber Tips - G...

T#:3018041

Part#: BM/T/21H-C

In Stock at Vendor

$ 9,962.99 USD

Add to Wish List

Qty

$ 9,962.99 USD

Add to Wish List

Includes rounded Classic Carbon Fiber Exhaust Tips The exhaust tone is most noticeable as you move through the gears and accelerate, and this can be further controlled through the addition of the optional Akrapovic Sound Kit to provide increased aural pleasure. Akrapovic has achieved power gains of 10.9 HP at 6,000 rpm and torque increases of 10.3 lb/ft Torque at 6,000 rpm when tested on the Akrapovic dyno against a G80 M3 with a stock M Sport exhaust system for comparison.

Show More Show Less

BMW G8X M2 M3 Akrapovic Tail Pipe Set - Octagonal Carbon Design ...

T#:28537478

Part#: TP-CT/69

Ships in 4 Business Days

$ 2,391.99

This product was last offered at the strikethrough price on
08-13-2026

$ 2,272.99 USD

Add to Wish List

Qty

$ 2,272.99 USD

Add to Wish List

The pioneering octagonal form, meticulously crafted from lightweight titanium and enhanced with a carbon-fiber outer layer, harmoniously accentuates the car's lines. Alternatively, for enthusiasts of a classic look, there's the enduring cylindrical design, likewise fashioned from top-tier materials. These refreshed BMW tailpipes by Akrapovič cater to diverse tastes while upholding exceptional craftsmanship standards.

Show More Show Less

Akrapovic Downpipe With Cat - G80/G82 M3/M4

T#:3018044

Part#: DP-BM/SS/8

In Stock at Vendor

$ 4,331.99 USD

Add to Wish List

Qty

$ 4,331.99 USD

Add to Wish List

This product is crafted from high-quality stainless steel, with the front part of the downpipe cast in Akrapovič’s in-house foundry. A sporty 300 cpsi catalytic converter is integrated into the downpipe, with the heat insulation made of stainless steel and a flexible tube incorporated into the middle section. It delivers a pure racing sound, full of emotion and adrenalin-inducing enjoyment, and great feedback at high revs, all without unwanted drone.

Show More Show Less

MOMO MOD.78 Suede Steering Wheel - 330mm & 350mm

T#:338958

Part#: TMS1350

In Stock at Vendor

Starting at $ 279.00 USD

Add to Wish List

Starting at $ 279.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable and slip resistant black suede covering, and thumb recesses for comfort and control.

Show More Show Less

Akrapovic Titanium Exhaust Suite - G80/G82 M3/M4

T#:3018050

Part#: BM/T/21H

In Stock at Vendor

Starting at $ 12,114.98 USD

Add to Wish List

Starting at $ 12,114.98 USD

Add to Wish List

Akrapovic is the first to market with the new G80/G82 Exhaust Suite. This exhaust suite has a variety of options from Downpipes, Center Section, Tip Style, Sound Kit, and Diffusors to help you get the configuration that meets your needs.

Show More Show Less

Akrapovic Sound Kit for BMW G80 G82 M3 M4

T#:3018043

Part#: P-HF1384

Ships in 4 Business Days

$ 605.99 USD

Add to Wish List

Qty

$ 605.99 USD

Add to Wish List

Akrapovic Sound Kit for BMW G80 G82 M3 M4 offers BMW owners the ability to control the sound of their Akrapovic exhaust system directly from the cockpit. Utilizing advanced Akrapovic technology, this kit allows drivers to switch between a quieter mode and a sportier exhaust sound. The system includes a receiver, already integrated into the Evolution exhaust system, which operates the actuators to open or close the exhaust valves. Drivers can manage the sound with the Sound Remote Controller or the latest smartphone app, compatible with both iOS and Android devices.

Enhanced Control: Allows for easy switching between quiet and sporty exhaust modes.
Advanced Technology: Features Akrapovic technology for precise sound management.
Convenient Operation: Control the exhaust valves using the Sound Remote Controller or a smartphone app.
Compatibility: Designed specifically for BMW G80 and G82 M3 and M4 models.
Easy Integration: Receiver included in the Evolution system for straightforward installation.

Show More Show Less

Vorsteiner VRS Front Grille - Carbon Fiber

T#:23185018

Part#: BMV3005

Special Order: No Guaranteed ETA

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

With Active Cruise Control and Black Mesh

Rear Carbon Fiber Diffuser - Gloss Carbon - G80/G82 M3/M4

T#:3018048

Part#: DI-BM/CA/9/G

In Stock at Vendor

$ 2,328.99 USD

Add to Wish List

Qty

$ 2,328.99 USD

Add to Wish List

The stunning carbon-fiber diffuser is offered as an option with the choice of a high-gloss or matt finish. It is a completely new design from the one that comes as standard on the car, and it gives the rear of the M8 a more aggressive and sporty feel. It shows off the Akrapovic tailpipes to their full extent and is a perfect accompaniment to the exhaust suite. Fitment notice: With Akrapovič diffuser, hands-free trunk-lid opening/closing sensor is not working.

Show More Show Less

MOMO Mod.08 Steering Wheel - Black - 350mm Suede

T#:343229

Part#: R1908/35S

Ships on Sep 24, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable suede covering, and an ergonomic feel for comfort and control. An ideal size for most cars and drivers, and made by renowned MOMO Italy. This is a most attractive and low cost solution. Hub adapter required.

Show More Show Less

MOMO Racing Prototipo 6C Steering Wheel - Black Leather Grip With Car...

T#:14122757

Part#: PRO35BK1C

Special Order: No Guaranteed ETA

$ 569.00 USD

Add to Wish List

Qty

$ 569.00 USD

Add to Wish List

MOMO Racing Prototipo 6C carbon fiber steering wheel feature spokes wrapped in genuine carbon fiber with smooth premium quality leather for the grip. MOMO individually selects hides from only the best suppliers to ensure they meet their high standards.

Show More Show Less

MOMO Tuner Steering Wheel - Black Spoke 320mm

T#:388375

Part#: TUN32BK0B

Special Order: No Guaranteed ETA

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control. An ideal size for most cars and drivers, and made by renowned MOMO Italy. This is a most attractive and low cost solution. Hub adapter required.

Show More Show Less

MOMO Prototipo Steering Wheel - Silver - 350mm

T#:388372

Part#: PRO35BK0S

Special Order: No Guaranteed ETA

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Monte Carlo Steering Wheel - Red - 350mm

T#:388364

Part#: MCL35BK3B

Special Order: No Guaranteed ETA

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Mod.07 Steering Wheel

T#:339964

Part#: TMS21537

Ships on Oct 2, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

MOMO Mod 07 steering wheel is inspired by classic rally cars. Featuring a deep 70mm dish layout to put the wheel rim closer to the driver. Having the wheel closer to the driver means better leverage for quick steering corrections The Mod 07 has a standard 30mm round rim in either leather or suede.

Show More Show Less

MOMO Team Steering Wheel

T#:390888

Part#: TEA-MOMO

Ships on Oct 2, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Mod.88 Steering Wheel - Black - 350mm

T#:1863

Part#: TMS1863

Special Order: No Guaranteed ETA

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

MOMO Mod.88 Steering Wheel for track/competition use. An evolution to the hugely popular Mod 78 wheel. This wheel features a flat bottom for more leg clearance and better grip. It has a slightly oblong 350mm diameter rim with black suede covering.

Show More Show Less

MOMO Automatico Shift Knob - Leather/Chrome

T#:388399

Part#: AUTOBK1

Special Order: No Guaranteed ETA

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

MOMO Automatico leather shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. High quality black Endurance leather with bright chrome base. The Automatico knob favors over-palm shifting (the palm over the top of the knob) or pistol grip shifting. This knob is 9.8oz, heavier than most MOMO or factory BMW knobs. Comes with installation kit, ready to install.

Show More Show Less

MOMO Tuner Steering Wheel

T#:340479

Part#: TUN35BK0B

Ships on Oct 2, 2026

Starting at $ 239.00 USD

Add to Wish List

Starting at $ 239.00 USD

Add to Wish List

The MOMO Tuner steering wheels combine the best features of all of the MOMO wheels. Stylish and functional, they give an immediate upgrade in steering feel and response while upgrading the aesthetics of your interior at the same time.

Show More Show Less

MOMO Daytona Racing Seat - All BMW

T#:585740

Part#: 1073KIT

Ships on Oct 2, 2026

Starting at $ 775.00 USD

Add to Wish List

Starting at $ 775.00 USD

Add to Wish List

MOMO Racing seats have bee proven to not only keep you in place, but also keep you alive. FIA 8855-1999 certification, Adjustable padding configuration, and 5 belt openings mean this seat can accommodate a wide range of Motorsport.

Show More Show Less

MOMO Prototipo Steering Wheel - Black - 350mm

T#:1040

Part#: PRO35BK2BLACK

Special Order: No Guaranteed ETA

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

MOMO Prototipo Black steering wheel. 350mm diameter (13.8 inches). Soft black leather rim with black anodized aluminum spokes. A beautiful addition to any interior. Perfect for vintage BMWs and Porsches because of its period-correct look.

Wheel hub adapter required.

Show More Show Less

MOMO Prototipo Steering Wheel

T#:390875

Part#: PRO35BK

Ships on Oct 2, 2026

Starting at $ 269.00 USD

Add to Wish List

Starting at $ 269.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Monte Carlo Steering Wheel - Black - 350mm

T#:1864

Part#: MCL35BK1B

Special Order: No Guaranteed ETA

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

MOMO Monte Carlo Steering Wheel. 350mm diameter (13.8 inches). Black leather rim with black anodized center. A beautiful and classic steering wheel upgrade.

Requires a wheel hub adapter, choose one below.

Show More Show Less

MOMO Monte Carlo Steering Wheel

T#:390872

Part#: MCL35BKXB

Ships on Oct 2, 2026

Starting at $ 239.00 USD

Add to Wish List

Starting at $ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. The MOMO Monte Carlo is a seminal classic MOMO wheel design. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

Akrapovic Titanium Slip On Exhaust With Octagonal Carbon Fiber Tips -...

T#:3018042

Part#: BM/T/21H-BC

Back Ordered

$ 10,143.99 USD

Add to Wish List

Qty

$ 10,143.99 USD

Add to Wish List

Includes rounded Octagonal Carbon Fiber Exhaust Tips The exhaust tone is most noticeable as you move through the gears and accelerate, and this can be further controlled through the addition of the optional Akrapovic Sound Kit to provide increased aural pleasure. Akrapovic has achieved power gains of 10.9 HP at 6,000 rpm and torque increases of 10.3 lb/ft Torque at 6,000 rpm when tested on the Akrapovic dyno against a G80 M3 with a stock M Sport exhaust system for comparison.

Show More Show Less

19" APEX VS-5RE Square Wheel Set - Satin Black

2X Entries Into Our F80 M3 Sweepstakes

T#:40478203

Part#: 5RE191122SBKT

Back Ordered

$ 3,716.00 USD

Add to Wish List

Qty

$ 3,716.00 USD

Add to Wish List

Apex VS-5RE 19x11" ET22 Square Wheel Set The VS-5RE is the forged Enduro version of our popular VS-5 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Sharing a similar split five spoke layout to our popular Sprint Line VS-5RS, the all new VS-5RE was designed to prioritize both strength and stiffness. The reality is that most enthusiasts and racers benefit far more from increased strength than they would from a small decrease in weight. The VS-5RE and the Enduro line as a whole was introduced to give the enthusiast community the choice to choose what's best for their application. In our pursuit of absolute strength, the Forged VS-5RE was given dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a substantially reinforced outer lip. When all put together, the VS-5RE is rated at an impressive 2100 lb max load. A major increase over its Sprint Line counterpart sitting at a 1600 lb load rating. To achieve this level of strength, our engineers added a considerable amount of material to the areas where it matters most. This does come with a bit of a weight penalty, however a host of weight saving measures have been implemented to minimize its effect. Deep spoke scalloping is utilized to shave material from the sides of spokes without compromising strength. Outer lip pocketing, a feature only seen on the Enduro Line within the Apex catalog, does away with excess material on the outer lip between each spoke. Our aim is for the Enduro VS-5RE to become the wheel of choice for anyone who appreciates the benefit of strength and stiffness over small weight savings. One must ask themselves how much faster will they truly be by dropping a few pounds of rotating mass and is it worth the trade off of losing confidence that your wheels will hold up lap after lap. Wheels lacking in stiffness flex under load, leading to lost camber during demanding cornering. Ultra lightweight wheels look great on paper, but they could cost you in the form of a lost podium or high cost of replacement. Whether you’re a hardcore racer or an enthusiast who appreciates great engineering, the VS-5RE is the answer.

Show More Show Less

APEX Gloss Black Wheel Center Cap - BMW/GR Supra 5x112mm

2X Entries Into Our F80 M3 Sweepstakes

T#:28637252

Part#: HWAPXCAPSUP5112R

Ships in 2 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

19" APEX ML-10RT Forged Wheels - Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788353

Part#: ML10199525112RKT

In Stock

$ 3,596.00 USD

Add to Wish List

Qty

$ 3,596.00 USD

Add to Wish List

19" APEX VS-5RE Square Wheel Set - Anthracite

2X Entries Into Our F80 M3 Sweepstakes

T#:40478202

Part#: 5RE191122ANKT

In Stock

$ 3,716.00 USD

Add to Wish List

Qty

$ 3,716.00 USD

Add to Wish List

Apex VS-5RE 19x11" ET22 Square Wheel Set The VS-5RE is the forged Enduro version of our popular VS-5 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Sharing a similar split five spoke layout to our popular Sprint Line VS-5RS, the all new VS-5RE was designed to prioritize both strength and stiffness. The reality is that most enthusiasts and racers benefit far more from increased strength than they would from a small decrease in weight. The VS-5RE and the Enduro line as a whole was introduced to give the enthusiast community the choice to choose what's best for their application. In our pursuit of absolute strength, the Forged VS-5RE was given dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a substantially reinforced outer lip. When all put together, the VS-5RE is rated at an impressive 2100 lb max load. A major increase over its Sprint Line counterpart sitting at a 1600 lb load rating. To achieve this level of strength, our engineers added a considerable amount of material to the areas where it matters most. This does come with a bit of a weight penalty, however a host of weight saving measures have been implemented to minimize its effect. Deep spoke scalloping is utilized to shave material from the sides of spokes without compromising strength. Outer lip pocketing, a feature only seen on the Enduro Line within the Apex catalog, does away with excess material on the outer lip between each spoke. Our aim is for the Enduro VS-5RE to become the wheel of choice for anyone who appreciates the benefit of strength and stiffness over small weight savings. One must ask themselves how much faster will they truly be by dropping a few pounds of rotating mass and is it worth the trade off of losing confidence that your wheels will hold up lap after lap. Wheels lacking in stiffness flex under load, leading to lost camber during demanding cornering. Ultra lightweight wheels look great on paper, but they could cost you in the form of a lost podium or high cost of replacement. Whether you’re a hardcore racer or an enthusiast who appreciates great engineering, the VS-5RE is the answer.

Show More Show Less

18" APEX SM-10 Staggered Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:19693156

Part#: SM10181011

Ships in 5 Business Days

Starting at $ 1,896.00 USD

Add to Wish List

Starting at $ 1,896.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Square Setup 18x10 ET30 18x11 ET40 APEX SM-10 Forged BMW Wheels On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

18" VS5RS APEX Square Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:19693203

Part#: VS5RS1810518SQ

Back Ordered

Starting at $ 3,116.00 USD

Add to Wish List

Starting at $ 3,116.00 USD

Add to Wish List

18x10.5 ET18 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

19"x 20" Apex VS-5RS Staggered Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:19693212

Part#: VS5RS19102011

Ships in 5 Business Days

Starting at $ 3,876.00 USD

Add to Wish List

Starting at $ 3,876.00 USD

Add to Wish List

20x11 ET18 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

19" Apex VS-5RS - Square Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:19627026

Part#: VS5RS191140Q

Back Ordered

Starting at $ 3,716.00 USD

Add to Wish List

Starting at $ 3,716.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 19x11 ET40 APEX VS-5RS Forged BMW Wheels On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

19" APEX VS-5 Staggered Wheel Set - Choose Your Finish!

2X Entries Into Our F80 M3 Sweepstakes

T#:40546004

Part#: VS5191011

Ships in 5 Business Days

Starting at $ 2,196.00 USD

Add to Wish List

Starting at $ 2,196.00 USD

Add to Wish List

APEX VS-5 19x10" ET12 & 19x11" ET22 Staggered Wheel Set VS-5 maximizes the performance potential of a flow-formed wheel. It combines features typically only found on forged wheels with a premium look at an unbeatable price. Features: Iconic 5-Spoke Design Side-Milled Spokes for Reduced Weight Reinforced Inner Lip for Strength Massive Brake Clearance Ultra-Concave Face Profiles Independently Tested and Certified Unmatched Replacement Program Lifetime Structural Warranty The VS-5 brings the aggressive look of our iconic forged VS-5RS to a flow-formed wheel. At a fraction of the price of its forged sibling, VS-5 punches well above its weight and maximizes the performance potential of a flow-formed wheel. With nearly two decades of experience perfecting track-ready flow-formed wheels, we engineered the VS-5 to deliver Real Performance at an unbeatable value. With a strength-to-weight ratio and features typically reserved for forged wheels, the VS-5 pushes the boundaries of flow-formed manufacturing to the max. Weighing only ~2-2.5 lbs more than its forged sibling, the VS-5 isn’t just a top tier option in the flow-formed space, it’s a wheel we consider the last step in performance before leveling up to a forged design. Flow-forming enables us to create high-performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow-formed wheels have a higher load rating than some competitors' forged wheels. A critical part of VS-5’s remarkable weight-savings, side-milled spokes also help with its stunning looks. The VS-5 features advanced side-milled spokes that have any excess material that doesn’t add strength removed from the sides of the spokes via precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise, we believe it's essential. The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our flow-formed Evolution Line adds more material to this vulnerable area as an added layer of protection against impact from track berms, potholes, and whatever else the road may throw at you.

Show More Show Less

20" APEX ML-10RT Staggered Wheel Set - Gloss Motorsport Gold w/ Machi...

2X Entries Into Our F80 M3 Sweepstakes

T#:37993443

Part#: ML10RT201011MGKT

Back Ordered

$ 4,076.00 USD

Add to Wish List

Qty

$ 4,076.00 USD

Add to Wish List

Introducing the ML-10RT, a forged wheel born from an engineering passion project and brought to life by the enthusiast community. Designed for those who demand both style and performance, the ML-10RT blends classic motorsport aesthetics with cutting-edge monoblock forging technology. Crafted from lightweight forged aluminum, the ML-10RT delivers exceptional strength, enhancing durability and handling. Its sleek multi-spoke design not only elevates your vehicle’s look but also ensures optimal brake clearance. Whether on the street or the track, this wheel is the perfect fusion of performance and style.

Show More Show Less

19"/20" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:43547387

Part#: ML10RT1920BCKT

Ships in 6 Business Days

$ 4,036.00 USD

Add to Wish List

Qty

$ 4,036.00 USD

Add to Wish List

The Apex ML-10RT forged wheel was designed for BMW enthusiasts who appreciate timeless motorsport design and demand modern engineering to back it up. Inspired by classic multi-spoke wheels that defined decades of racing heritage, the ML-10RT takes that spirit and elevates it with cutting-edge monoblock forging technology for uncompromising strength and lightweight performance.

Show More Show Less

19" APEX SM-10 Square Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:19627034

Part#: SM10191140Q

Ships in 5 Business Days

Starting at $ 2,016.00 USD

Add to Wish List

Starting at $ 2,016.00 USD

Add to Wish List

19x11 ET40 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

19" APEX VS-5RS Staggered Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:19660137

Part#: VS5RS199511

Back Ordered

Starting at $ 3,656.00 USD

Add to Wish List

Starting at $ 3,656.00 USD

Add to Wish List

19x9.5 ET25 19x11 ET40 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

APEX Solid Gloss Black BMW Center Caps - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:639899

Part#: HW-APX-CAP-BLK

Ships in 10 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

APEX Wheels Metal Valve Stem - Black - BMW & MINI

2X Entries Into Our F80 M3 Sweepstakes

T#:593644

Part#: HW-OEM-VALVE-BK

Ships in 3 Business Days

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

Akrapovic Rear Wing Forged Carbon Fiber W/brackets G22 G23 G82 G83 ...

T#:37993446

Part#: WI-BM/CA/1/CFKT2

Back Ordered

$ 5,530.00 USD

Add to Wish List

Qty

$ 5,530.00 USD

Add to Wish List

Akrapovic Rear Wing Forged Carbon Fiber - G22 G23 G82 G83

The Akrapovic Rear Wing Forged Carbon Fiber - G22 G23 G82 G83 is a premium aerodynamic upgrade designed for BMW M2, M240i, and other compatible models. Crafted from lightweight, handcrafted chopped carbon fibre and finished with a high-gloss lacquer, this rear wing combines striking aesthetics with motorsport-inspired performance. The swan neck design, supported by CNC-machined aluminium brackets, ensures an optimal balance between weight reduction and structural strength. High-grade titanium reinforcements at pivot points enhance durability, while the aerofoil design maximizes downforce and minimizes drag for superior handling. Fully adjustable to three levels, this wing allows drivers to customize their setup for peak performance. ABE approved with KBA 31882 type certification, it is road-legal and features an understated Akrapovič monochrome logo on each side for a refined touch. Optimized using computational fluid dynamics (CFD), this wing ensures minimal air turbulence and noise, making it a perfect fit for BMW G22, G23, G42, G80, G82, G83, and G87 models.

Key Benefits:

Lightweight, handcrafted chopped carbon fibre construction for durability and performance.
High-gloss lacquer finish for a sleek, premium appearance.
Swan neck design with CNC-machined aluminium brackets for optimal weight-to-strength ratio.
High-grade titanium reinforcements for enhanced structural stability.
Motorsport-inspired aerofoil design maximizes downforce and minimizes drag.
Fully adjustable to three levels for customizable performance tuning.
ABE approved with KBA 31882 type certification, ensuring road legality.
Optimized using computational fluid dynamics (CFD) for minimal air turbulence and noise.
Compatible with BMW G22, G23, G82, and G83 models.

Upgrade your BMW with the Akrapovic Rear Wing Forged Carbon Fiber and experience the perfect blend of cutting-edge aerodynamics and premium craftsmanship.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW G82 M4 S58 3.0L

Sub-Categories

Akrapovic Rear Wing Forged Carbon Fiber - G22 G23 G82 G83

Key Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results