BMW Tools & Specialty Equipment for BMW G82 M4 S58 3.0L

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

AGA Tools' Clean Oil Funnel Kit is expertly designed to streamline and improve the engine oil-filling process, catering to the needs of both professional auto shops and DIY enthusiasts.

With a set of 13 manufacturer-specific adapters, the kit accommodates a broad spectrum of vehicles, including the latest BMW and Mercedes-Benz models featuring the 1/4 turn style. The kit includes a comprehensive information card that showcases color-coded adapters for easy reference.

The funnel features a generously wide mouth, enabling the spill-free pouring of an entire quart of oil. Designed to adapt to angled valve covers, the kit comes with angled attachments, ensuring compatibility with various configurations. After use, seal the funnel by capping the tip and closing the lid to prevent leaks and the entry of debris.

Additionally, the kit incorporates the Clean Oil Vacuum Regulator adapter (sold separately). Employing the Vacuum Regulator and adapter allows for the installation of AGA's Clean Oil Drain Plug or Adapter Test Block, facilitating a quick and immaculate oil change process.

EXTRACTOR:

The Schwaben 6.5 Liter Extractor empowers you with swift, hand-operated fluid extraction. Complete with two tubes of varying diameters to suit your unique needs, this system's vacuum release button guarantees seamless operation. Clearing 6.5 Liters (6.8 qts.) of fluid in minutes, it preserves a spotless, oil-free workspace. Its ingeniously designed pour spout ensures mess-free fluid disposal.

Features:

• Stability First: Equipped with a flip-out foot for steady usage, delivering precise extraction.
• Organized Efficiency: Integrated hose storage streamlines your extraction process.
• Perfectly Sized: A 41" main tube (3/8" OD) and two 35" extension tubes (1/4" and 3/16" OD) ensure versatility across applications.
• Beyond Extraction: It doubles as a brake bleeder with the optional ES3248036 Brake Bleeder Hose.
• LIFETIME REPLACEMENT: Like almost all Schwaben tools, this fluid extractor is backed by our lifetime replacement program should anything go wrong!

ADAPTER:

This adapter hose allows a quick and easy suction thru the bleeder screw. This hose has included shut off valve in hose.  This will improve your extractor capabilities and make it even more of an all-in-one tool!

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The Universal 40 Piece Metric Socket Set includes all of the necessary tools to create a socket set by purchasing only one ratchet. The included 3/8-inch drive flex head ratchet and two female 3/8-inch drive adapters will allow you to use 3 different drive sizes of sockets: 1/4", 3/8", and 1/2"! Use this kit to help complete your tool kit until you decide to purchase more ratchet sizes, and when you do, you don't have to get rid of any of these tools to do so, which is possible with the adapters.

And of course, this kit is included in our LIFETIME REPLACEMENT program!

Includes:

• 4 mm (1/4" Drive)
• 4.5 mm (1/4" Drive)
• 5 mm (1/4" Drive)
• 5.5 mm (1/4" Drive)
• 6 mm (1/4" Drive)
• 7 mm (1/4" Drive)
• 8 mm (1/4" Drive and 3/8" Drive)
• 9 mm (1/4" Drive and 3/8" Drive)
• 10 mm (1/4" Drive, 3/8" Drive, and 1/2" Drive)
• 11 mm (1/4" Drive and 3/8" Drive)
• 12 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 13 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 14 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 15mm (3/8" Drive and 1/2" Drive)
• 16mm (3/8" Drive and 1/2" Drive)
• 17mm (3/8" Drive and 1/2" Drive)
• 18mm (3/8" Drive and 1/2" Drive)
• 19mm (3/8" Drive and 1/2" Drive)
• 21mm (1/2" Drive)
• 22mm (1/2" Drive)
• 24mm (1/2" Drive)

3/8" DRIVE LONG FLEX HEAD RATCHET:

A professional quality flex ratchet features a fine satin finish designed for durability and easy clean up.

Features:

• Special designed 72T gear mechanism
• 5 degree of handle movement between gears 
• Flex head has 7 detent positions in a 180 degree swing
• Push button release holds socket tight until you are ready to release
• Ratchet is a full 290mm ( 11") long for extra leverage.

3/8" DRIVE 6 POINT SOCKET SET:

A satin chrome finish with a knurled ring around socket body, the knurling allows for a better grip when hands and sockets are covered in oil or grease. All sockets feature a radius in the corners for superior torque to the sides of the fastener, not the corner. Complete size coverage.

Includes:

• 8mm
• 9mm
• 10mm
• 11mm
• 12mm
• 13mm
• 14mm
• 15mm
• 16mm
• 17mm
• 18mm
• 19mm

LIFETIME REPLACEMENT on all items in this kit!

LOW PROFILE JACK:

Meet the Schwaben Long Low Profile - High Lift Floor Jack: A Must-Have for BMW and MINI Enthusiasts.

Experience unmatched lifting efficiency with the Schwaben Long Low Profile - High Lift Floor Jack. Engineered with BMW and MINI enthusiasts in mind, this jack boasts a unique blend of features tailored to your beloved vehicles.

Key Features:

• Swift Reach: Innovative One Pump feature ensures quick contact with most cars.
• Versatile Reach: Ultra-long arm accommodates lowered cars and high vehicles like trucks and SUVs.
• Safety Assured: Overload system prevents usage beyond its rated capacity, enhancing security.
• Precision Control: Universal joint on the handle offers precise load management.
• Seamless Positioning: Swivel saddle and rear casters enable easy jack placement.
• Vehicle Care: Soft foam sleeve on the handle safeguards your vehicle's finish.
• Protective Padding: Rubber saddle pad shields your car during lifting.
• Added Convenience: Equipped with a tool tray on the jack for lug nuts and tools.
• LIFETIME REPLACEMENT: If this jack is injured in the line of duty, it will be backed by our lifetime replacement policy!

Specifications:

• Minimum Height: 2-3/4"
• Maximum Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Distance to Jack Pad Center from Pivot Point: 22"
• Front Caster Dimensions: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Max Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

DRAIN PAN:

Features:

• Use it for oils or coolant
• Only 125mm high!
• Rolls on 4 casters for ease of use

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.