BMW Intake Parts for BMW G82 M4 S58 3.0L

High Performance Drop-In Air Filter Upgrade - Black - S58 G80, G82, G...

2X Entries Into Our F80 M3 Sweepstakes

T#:5802145

Part#: VTT-S58-FILTER-B

In Stock

$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.99 USD

Limited Qty Sale

Add to Wish List

Features: 50 States Emissions Legal Easy to install 15-30 minutes even for a novice Filters can be cleaned forever meaning never buy new filters Up to 13WHP gains Completely reversible if you ever want to remove VTT is proud to offer high-performance drop-in replacement filters for the 2021+ G8X M3/M4. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. On the dyno, VTT saw more than 13WHP gains with these filters and our Carbon Fiber intake Tops. These filters will also work perfectly with the stock tops. We recommend removing the pre-filter for best flow if the stock top is used. Black.

Show More Show Less

BMS Elite Performance Intake with Blue Filters - G80/G82 M3/M4 ...

T#:3886580

Part#: G8X-ELT-INTK-B

Ships on Oct 8, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The BMS Elite Performance Intake retains everything that's good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow 3.5" ducting and quality BMS inverted cone air filters to match.

Show More Show Less

BMS Drop-In Performance Air Filters - S58

T#:38621427

Part#: BMS-DAF-S58

Ships on Oct 8, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Burger Motorsports Performance S58 G8X BMW Drop-In Air Filters exceed OE standards, featuring oiled cotton media for enhanced airflow, effective contaminant filtration, and increased horsepower. These high-performance filters are washable and reusable, designed to last the lifetime of your vehicle. They easily install into your factory airboxes. Replaces OEM BMW part numbers: 🔹 Left: 13-71-8-095-807 🔹 Right: 13-71-8-095-805

Show More Show Less

High Performance Drop-In Air Filter Upgrade - Red - S58 G80, G82, G83...

2X Entries Into Our F80 M3 Sweepstakes

T#:5802144

Part#: VTT-S58-FILTER-R

Ships in 10 Business Days

$ 178.99 USD

Add to Wish List

Qty

$ 178.99 USD

Add to Wish List

Features: 50 States Emissions Legal Easy to install 15-30 minutes even for a novice Filters can be cleaned forever meaning never buy new filters Up to 13WHP gains Completely reversible if you ever want to remove VTT is proud to offer high-performance drop-in replacement filters for the 2021+ G8X M3/M4. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. On the dyno, VTT saw more than 13WHP gains with these filters and our Carbon Fiber intake Tops. These filters will also work perfectly with the stock tops. We recommend removing the pre-filter for best flow if the stock top is used. Red.

Show More Show Less

BMS Elite Performance Intake With Red Filters - G80/G82 M3/M4 ...

T#:3943329

Part#: G8X-ELT-INTK-R

Ships on Oct 8, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The BMS Elite Performance Intake retains everything that's good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow 3.5" ducting and quality BMS inverted cone air filters to match.

Show More Show Less

Nozzle Mounting adapter for hose

T#:31522909

Part#: 40110

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Burger Motorsports S58 Port Injection Intake Manifold And Intercooler...

T#:46993579

Part#: BMSS58PIIM

Ships on Oct 8, 2026

Starting at $ 2,499.00 USD

Add to Wish List

Starting at $ 2,499.00 USD

Add to Wish List

When it comes to S58 intake manifolds it doesn't get any better than this. The Burger Motorsports intake manifold replaces your factory plastic S58 manifold and intercooler with a direct-fit, high-flow, high-strength aluminum manifold. The intercooler core is double the size of the factory unit, and the manifold features port injection bungs located on the top of the manifold for easy access and optimal injector spray pattern. Includes high-quality o-rings and all required hardware. The BMS manifold has approximately 76.1% more internal volume than the OEM manifold

Show More Show Less

VTT “Game Changer” S58 Charge Air Cooler (Di Only Raw)

2X Entries Into Our F80 M3 Sweepstakes

T#:13266396

Part#: : VTT-S58-CHARGE

Ships in 10 Business Days

$ 5,512.99 USD

Add to Wish List

Qty

$ 5,512.99 USD

Add to Wish List

This VTT charge air cooler is perfectly designed to reduce heat soak and increase power and efficiency! This increased airflow lets the engine breathe better and perform under hard and light acceleration. The team at VTT was able to take the limited space given to them by the factory, and add not only a larger more efficient core, but also much better-designed/flowing runners, and end tanks.

Show More Show Less

VTT “Game Changer” S58 Charge Air Cooler (PI RAW)

2X Entries Into Our F80 M3 Sweepstakes

T#:13266403

Part#: VTTS58CHARGEPIRA

Ships in 10 Business Days

$ 5,458.99 USD

Add to Wish List

Qty

$ 5,458.99 USD

Add to Wish List

This VTT charge air cooler is perfectly designed to reduce heat soak and increase power and efficiency! This increased airflow lets the engine breathe better and perform under hard and light acceleration. The team at VTT was able to take the limited space given to them by the factory, and add not only a larger more efficient core, but also much better-designed/flowing runners, and end tanks.

Show More Show Less

VTT Carbon Fiber Intake Kit - G80 G82 G83 - S58

2X Entries Into Our F80 M3 Sweepstakes

T#:5802143

Part#: VTT-S58-CARBON-I

Ships in 10 Business Days

$ 881.99 USD

Add to Wish List

Qty

$ 881.99 USD

Add to Wish List

The BMW S58 G8X M3/4 Carbon fiber intakes! BMW did a wonderful job designing these intakes and we have found they are only slightly restrictive at elevated power levels, mostly due to the secondary filter inside, and the factory paper filter. The factory setup is EXTREMELY efficient with only a couple of small changes. With this in mind, VTT decided to just take their cues, and make factory-style carbon fiber intake tops with no secondary filters, and high flow cotton pre-oiled filters. These are 8 layers of 100% carbon not a single layer wrapped over plastic and they are 1.3MM thick with the VTT logo vacuum printed onto the tops, with a UV resistant gloss clear coating. This is not only strong but will resist discoloration for an extended period of time. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. 50 States Emissions Legal Easy to install 15-30 minutes even for a novice Beautiful Carbon Fiber finish really adds class to the S58 engine bay Filters can be cleaned forever meaning never buy new filters Up to 13WHP gains Completely reversible if you ever want to remove

Show More Show Less

BMS Front Mount Performance Silicone Intake - Blue Filters

T#:41255920

Part#: S58FMSILINT-BLU

Ships on Oct 8, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Elevate the capabilities of your G8x or F9x S58-powered BMW with an intake system engineered to true motorsport standards. The BMS Front-Mount Performance Intake completely eliminates the restrictive OEM induction setup, replacing it with a continuous 3.5" high-flow tract designed for maximum volumetric efficiency.

Show More Show Less

BMS Drop-In Performance Air Filters - S63/68

T#:38688928

Part#: BMS-DAF-S6368

Ships on Oct 8, 2026

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

Burger Motorsports Performance S63/S68 BMW X5, X5M, X7, and XM Drop-In Air Filters exceed OE standards, utilizing layered, oiled cotton media that maximizes airflow while effectively trapping contaminants and increasing horsepower. These high-performance filters are washable, reusable, and engineered to last the life of your vehicle. Easy to install, they fit directly into your factory airboxes for a quick upgrade.

Show More Show Less

VTT “Game Changer” S58 Charge Air Cooler (PI Coated)

2X Entries Into Our F80 M3 Sweepstakes

T#:13266409

Part#: VTTS58PICOAT

Ships in 10 Business Days

$ 5,847.99 USD

Add to Wish List

Qty

$ 5,847.99 USD

Add to Wish List

This VTT charge air cooler is perfectly designed to reduce heat soak and increase power and efficiency! This increased airflow lets the engine breathe better and perform under hard and light acceleration. The team at VTT was able to take the limited space given to them by the factory, and add not only a larger more efficient core, but also much better-designed/flowing runners, and end tanks.

Show More Show Less

VTT “Game Changer” S58 Charge Air Cooler (DI Only Coated) ...

2X Entries Into Our F80 M3 Sweepstakes

T#:13266406

Part#: VTTS58DICOAT

Ships in 10 Business Days

$ 5,637.99 USD

Add to Wish List

Qty

$ 5,637.99 USD

Add to Wish List

This VTT charge air cooler is perfectly designed to reduce heat soak and increase power and efficiency! This increased airflow lets the engine breathe better and perform under hard and light acceleration. The team at VTT was able to take the limited space given to them by the factory, and add not only a larger more efficient core, but also much better-designed/flowing runners, and end tanks

Show More Show Less

Buger Motorsports 700HP Package - Blue Filters - BMW G8X S58 ...

T#:41255925

Part#: S58700HP-BLUKT

Ships on Oct 8, 2026

$ 2,075.99

This product was last offered at the strikethrough price on
05-23-2026

$ 2,066.00 USD

Add to Wish List

Qty

$ 2,066.00 USD

Add to Wish List

Unleash 700+ HP with safe, proven JB4 tuning on your locked ECU while maintaining reliability and drivability. This package delivers maximum power, optimized airflow, and real-time performance monitoring—all with easy plug-and-play installation and no permanent modifications.

Show More Show Less

CANbus Flex Fuel Kit - Complete Kit W/ CABbus ECA & Universal Harness...

T#:49613450

Part#: G8XS58CANFFUH

Ships on Oct 8, 2026

$ 479.99

This product was last offered at the strikethrough price on
05-22-2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

BMW 5bar Sensor - B58/S58

T#:49822565

Part#: BMSB585BS

Ships on Oct 8, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Compatible with BMW B58 and S58 engines Accurate, reliable, and plug-and-play — the B58/S58 5-Bar TMAP Sensor ensures your engine sees the full boost picture, giving your tune the confidence it needs to perform safely and consistently.

Show More Show Less

BMS Elite Performance Intake - Flat Black W/ Blue Filters

T#:39633149

Part#: G8XELTINFBBF

Ships on Oct 8, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

BMS Elite Performance Front Mount Intake - Red - G8X S58

T#:12413839

Part#: S58FMINTAKERED

Ships on Oct 8, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Red Filter with Front Mount Relocation. An intake system worthy of your S58 G80 M3 and G82 G83 M4! The Front Mount (behind the grille) BMS Elite G8x S58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks.

Show More Show Less

BMS Elite Performance Front Mount Intake - Blue - G8X S58

T#:12413838

Part#: S58FMINTAKEBLUE

Ships on Oct 8, 2026

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

Blue Filter with Front Mount Relocation. An intake system worthy of your S58 G80 M3 and G82 G83 M4! The Front Mount (behind the grille) BMS Elite G8x S58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks.

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

Ships in 5 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

#4 Water Methanol Nozzle - 4 GPH

T#:13957879

Part#: SNO-N0400

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

High Flow Water-Methanol Solenoid Upgrade - Quick-Connect Fittings ...

T#:598937

Part#: SNO-40060

In Stock at Vendor

$ 73.00 USD

Add to Wish List

Qty

$ 73.00 USD

Add to Wish List

Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: Robust Methanol Resistant Stainless Steel/Zinc Design High PSI Solenoid Designed to Be Used Between Pump & Injection Point Two Brackets Mounted To Solenoid For Easy Install Pigtail Harnessed Wiring Connections Easy to Read "Flow" Indication 2 Quick Connect Fittings To 1/4" High Temp Nylon Tubing Large 3/16" Orifice For Maximum Flow Through System

Show More Show Less

Boost Cooler Forced Induction Progressive Engine Mount Water-Methanol...

T#:641833

Part#: SNO-20010

In Stock

$ 520.99 USD

Add to Wish List

Qty

$ 520.99 USD

Add to Wish List

Keep BMW boost temperatures in check with the Snow Performance Stage 2 Boost Cooler water methanol injection kit, suitable for all forced induction applications (Supercharged/Turbocharged). This kit enhances performance and cooling, especially beneficial for direct-injected engines, effectively removing carbon build-up on valves.

Suitable for all forced induction applications (Supercharged/Turbocharged)
Simple handheld display for easy injection point adjustment
VC-30 progressive controller with digital display and MAP sensor for precise injection
Adjustable start and full points for optimal engagement
Proportional injection based on boost pressure for accurate delivery
Improves drivability and provides cooling benefits
Recommended for street/strip driven gas forced induction vehicles
OEM approved water methanol injection pump with proprietary heat flange
Extreme Environment 300 PSI UHO pump for durability in elements
100% methanol resistant components for longevity
ACU-SEAL compression fittings for leak-free operation
Increases induction charge density for enhanced performance
Made in the U.S.A. and supports 1,000+ HP

Show More Show Less

Snow Performance Water Methanol Injection Nozzle - 8GPH

T#:17040324

Part#: SNO-N0800

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

Water/Methanol Nozzle - 6GPH

T#:21374127

Part#: SNO-N0600

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

High Flow Water Methanol Check Valve

T#:2317849

Part#: SNO-8CV-QC

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

SnowPerformance Stage 2.5 Boost-Controlled Water/Meth Injection Kit -...

T#:380988

Part#: SNO210

In Stock

$ 583.99 USD

Add to Wish List

Qty

$ 583.99 USD

Add to Wish List

The Snow Performance Stage 2 Boost Cooler is the most advanced gauge style water-meth system on the market. This kit includes a boost referenced VC-50 controller, the Stage 2 has the ability to progressively command 2 Hyper-Sonic Nozzles on an independent basis.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

N1000 - Snow Performance Water Injection Nozzle

T#:2317846

Part#: SNO-N1000

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Water-Methanol Dual Nozzle Upgrade - Quick-Connect Fittings

T#:598936

Part#: SNO-40040

In Stock

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Red High Temp Nylon Tubing - 20ft

T#:640586

Part#: SNO-8087

In Stock at Vendor

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Low Profile Water-Methanol Nozzle Holder 4AN 90* Elbow

T#:640584

Part#: SNO-809-BRD

In Stock

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

GAS STAGE 3 DIRECT INJECTION WATER METHANOL CONTROLLER

T#:586250

Part#: SNO-60300

Ships in 1 Business Day

$ 416.99 USD

Add to Wish List

Qty

$ 416.99 USD

Add to Wish List

Water/Methanol Nozzle - 1.5GPH

T#:21374121

Part#: SNO-N0150

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Snow Performance Stage 3 Boost Cooler (EFI - Port Injection) - Braide...

T#:21374153

Part#: SNO-310-BRD

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

High Flow Water-Methanol Solenoid Upgrade - 4AN Fittings

T#:21308462

Part#: 40060-BRD

In Stock

$ 73.00 USD

Add to Wish List

Qty

$ 73.00 USD

Add to Wish List

Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: 100% Methanol Resistant Stainless Steel Construction Comes with (2) 1/8" NPT to 4AN Fittings & Mounting Hardware Can Be Used With All Snow Performance Water Methanol Injection Kits & Upgrades Highest Flowing Water Methanol Solenoid On The Market U.S.A Made

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Oct 8, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Snow Performance Water Methanol Injection Nozzle - 7GPH

T#:17040323

Part#: SNO-N0700

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Constructed out of 100% methanol resistant nickel plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a removable 80 micron filter, the Hyper-Sonic nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today! (1/8" NPT Threads)

Show More Show Less

Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol In...

T#:21374123

Part#: SNO-211-BRD

In Stock at Vendor

$ 909.99 USD

Add to Wish List

Qty

$ 909.99 USD

Add to Wish List

Water-Methanol Dual Nozzle Upgrade Stainless Steel Braided Line ...

T#:21374131

Part#: SNO-40040-BRD

In Stock at Vendor

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

82040R - Snow Performance Tee Adapter Fitting

T#:2317847

Part#: SNO-82040R

In Stock at Vendor

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Oct 8, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Boost Cooler Stage 3 DI ProLine Water Injection

T#:21308464

Part#: SP10317PRO

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

The Snow Performance Stage 3 Boost Cooler brings 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2Dinjection map based off boost and fuel pressure sensor input to deliver an extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. None invasive, the Stage3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25points for maximum HP and cooling . Comes with adjustable Stage 3 water-meth controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle.

Show More Show Less

Stage 2 Boost Cooler Forced Induction Progressive Engine Mount Water-...

T#:641841

Part#: 20010-BRD

In Stock at Vendor

$ 625.00 USD

Add to Wish List

Qty

$ 625.00 USD

Add to Wish List

Turner Motorsport presents the Snow Performance Stage 2 Boost Cooler Water Methanol Injection Kit, ideal for all forced induction applications, including supercharged and turbocharged BMWs. With its easy-to-use handheld display screen, this kit allows precise control over injection points and can be conveniently mounted for access. The VC-30 progressive controller adjusts water/methanol injection based on boost pressure, providing accurate delivery for improved drivability and cooling benefits. This kit is recommended for street/strip driven gas forced induction vehicles seeking cooling over a wide range, especially beneficial for direct-injected engines to remove carbon buildup on valves. Key benefits include:

Precise injection control for improved performance
OEM-approved water methanol injection pump for durability
100% methanol-resistant components for long-lasting use
Guaranteed leak-free operation with ACU-SEAL compression fittings
Increases induction charge density and fuel octane levels for full power

Show More Show Less

High Flow Water-Methanol Check Valve 4AN Fittings

T#:21374126

Part#: SNO-8CV-BRD

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

14GPH Water-Methanol Nozzle

T#:21374112

Part#: SNO-N1400

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Water Methanol Controller (Boost) - VC-30

T#:21308475

Part#: SNO-60400

In Stock at Vendor

$ 184.99 USD

Add to Wish List

Qty

$ 184.99 USD

Add to Wish List

Water Methanol Controller (Boost) - VC-30 is a sophisticated progressive controller that includes a digital display and boost sensor for precise water/methanol injection. Designed for BMW vehicles, this controller adjusts the injection rate based on boost pressure, ensuring optimal performance and cooling.

Precision Injection: The VC-30 proportionally injects water/methanol based on boost pressure, providing accurate delivery for cooling and performance improvements.
Adjustable Settings: Features adjustable start and full points for customizable engagement and delivery curves to meet engine requirements.
Enhanced Cooling: Improves drivability and cooling benefits across a wide range, making it especially beneficial for direct-injected engines.
Carbon Build-Up Reduction: Effectively removes 100% of carbon build-up on valves, enhancing engine longevity and performance.
Digital Display: Includes a user-friendly digital display for monitoring and adjusting settings.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW G82 M4 S58 3.0L

Sub-Categories

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results