82040R - Snow Performance Tee Adapter Fitting

T#:2317847

Part#: SNO-82040R

In Stock at Vendor

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol In...

T#:21374123

Part#: SNO-211-BRD

In Stock at Vendor

$ 909.99 USD

Add to Wish List

Qty

$ 909.99 USD

Add to Wish List

Water/Methanol Nozzle - 1.5GPH

T#:21374121

Part#: SNO-N0150

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

High Flow Water-Methanol Solenoid Upgrade - 4AN Fittings

T#:21308462

Part#: 40060-BRD

In Stock

$ 73.00 USD

Add to Wish List

Qty

$ 73.00 USD

Add to Wish List

Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: 100% Methanol Resistant Stainless Steel Construction Comes with (2) 1/8" NPT to 4AN Fittings & Mounting Hardware Can Be Used With All Snow Performance Water Methanol Injection Kits & Upgrades Highest Flowing Water Methanol Solenoid On The Market U.S.A Made

Show More Show Less

Stage 3 Boost Cooler (Direct Injection) - Braided Line

T#:14651267

Part#: SNO-320-BRD

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

High Flow Water Methanol Check Valve (Nylon Line)

T#:21374130

Part#: SNO-8CV

Ships in 6 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...

T#:590418

Part#: 30-3304

In Stock at Vendor

11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Qty

11% off MSRP

$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

Enhances performance and efficiency for BMW and MINI vehicles
Maximizes power output while ensuring engine safety
Internal MAP sensor for precise control
35PSI maximum pressure capacity for reliability
Improves horsepower, torque, and fuel economy

Show More Show Less

Black High Temp Nylon Water Methanol Tubing - 20'

T#:20815165

Part#: SNO-80088

Special Order: No Guaranteed ETA

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Snow Performance 20' Bag High Temp Nylon Water Methanol Tubing 100% Methanol Resistant 800 PSI Burst Rating Black

Billet 100 Micron Water Methanol Filter

T#:21374114

Part#: SNO-38FIL

Special Order: No Guaranteed ETA

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

Water-Methanol Braided SS Line Trunk Mount Upgrade (4AN SS Braided Li...

T#:21308470

Part#: SNO-40012-BRD

In Stock at Vendor

28% off MSRP $ 218.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 156.99 USD

Add to Wish List

Qty

28% off MSRP

$ 218.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 156.99 USD

Add to Wish List

Water-Methanol Braided SS Line Trunk Mount Upgrade (4AN SS Braided Line Systems) is designed to relocate your standard 3QT Snow Performance Water-Methanol Tank or any custom tank to the trunk of your vehicle. This upgrade includes everything necessary to safely move and secure your water-methanol system.

Comprehensive Kit: Includes 15 feet of stainless steel braided line, a high-flow solenoid upgrade, and all required AN fittings.
Durable Construction: Features high-quality, stainless steel braided lines for superior strength and resistance to wear.
Enhanced Performance: Designed to ensure optimal performance and reliability of your water-methanol system when relocated.
Easy Installation: Provides all necessary components for a straightforward trunk mount installation.
Versatile Application: Suitable for moving standard and custom water-methanol tanks to the trunk of any vehicle.

Show More Show Less

E6000 Sealant (.18 Oz)

T#:21374144

Part#: SNO-90001

In Stock

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

AEM Water/Methanol Injection System

T#:20815164

Part#: 30-3326

In Stock at Vendor

11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

Qty

11% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector

Show More Show Less

Water/Methanol Injection Hose - 20'

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

3GPH Water-Methanol Nozzle

T#:21374115

Part#: SNO-N0300

Ships on Sep 16, 2026

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Snow Performance 1/8NPT-1/4 Quick Connect Fitting

T#:2317850

Part#: SNO-82082R

In Stock at Vendor

23% off MSRP $ 12.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.99 USD

Add to Wish List

Qty

23% off MSRP

$ 12.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.99 USD

Add to Wish List

4AN "T" Fitting

T#:21374143

Part#: SNO-806-BRD

In Stock at Vendor

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Stage 3 Boost Cooler (EFI - Port Injection) - Nylon Line

T#:21374154

Part#: SNO-310

In Stock at Vendor

$ 729.99 USD

Add to Wish List

Qty

$ 729.99 USD

Add to Wish List

WMI Inline Filter

T#:21176933

Part#: BMS-WMI-FIL

Ships on Sep 16, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

BMS Water/Methanol Port Injection (WMI) Kit - S58

T#:21308440

Part#: WMIK-S58

Ships on Sep 16, 2026

Starting at $ 1,899.00 USD

Add to Wish List

Starting at $ 1,899.00 USD

Add to Wish List

The Fuel-It! S58 BMW Port Injection Kit is the ultimate fueling solution for your S58 powered BMW. It adds six supplemental low-pressure fuel injectors allowing fueling of up to 1000+ whp using water/methanol blends. This kit includes stainless steel BMS Elite braided lines. They feature an inner Teflon seal for leak-free operation, stainless steel braid, a black outer nylon mesh for abrasion resistance and a stealthy look. These lines not only look great they are also equipped with BMS Elite AN fittings and can withstand extreme pressure and temperature conditions. The included Burger Motorsports DDP 5800 water/methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. Stealth Tank for G20 G22 & G80 M3 & G82 M4 BMW tucks neatly in the side pocket of your trunk! This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Features & Benefits Included tank leaves trunk completely clear for full use of space Super low profile design tucks neatly into the existing left side trunk cavity 3.5 Gallon (13.25 liters) capacity Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance. DDP 5800 pump mounts directly to the tank Includes 2-way vented black plastic cap Includes all mounting hardware What's included: (1) Fuel-It! S58 Billet Fuel Rail (6) 550cc Fuel Injectors (1) 15' Stainless steel braided water/Methanol line with black nylon sheathing (1) BMS Water/Methanol Pump (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) -6AN ORB fitting (1) -6AN ORB plug (2) 1/8" NPT plugs (3) 14 x 1 Stainless steel screws to secure the rail to your manifold (1) Injector installation jig (1) 8 x 3/4" screw for the installation jig (1) 21/64 drill bit to open the factory injector bosses (1) Superlube® (1) BMS JB4 Port Injection Controller (7) Wire nuts (1) inline fuse holder (1) 12V Relay (1) 15' of red power wire (1) 15' of black power wire 3.5 Gallon Tank: What's included: (1) 3.5 Gallon Stealth Tank (1) 2-way vented black plastic filler cap (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male (1) 18" of 1/4" nylon meth line (2) Powder coated stainless lower bracket (2) Rubber lower bracket grommets (2) BMS custom bell washers (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long (1) Plastic upper bracket (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) Billet 1/4 push male to -4AN male 90º (pump out) (1) 1/4 push male to female 90º (pump in) (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis) (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis) (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)

Show More Show Less

Water/Methanol Port Injection Kit - S58

Requires modification for tank fitment!

T#:21209840

Part#: BMS-MPIKS58

Ships on Sep 16, 2026

Starting at $ 1,699.00 USD

Add to Wish List

Starting at $ 1,699.00 USD

Add to Wish List

Make tremendous amounts of power on pump gas! The Fuel-It! S58 BMW Port Injection Kit is the ultimate fueling solution for your S58 powered BMW. It adds six supplemental low-pressure fuel injectors allowing fueling of up to 1000+ whp using water/methanol blends. This kit includes stainless steel BMS Elite braided lines. They feature an inner Teflon seal for leak-free operation, stainless steel braid, a black outer nylon mesh for abrasion resistance and a stealthy look. These lines not only look great they are also equipped with BMS Elite AN fittings and can withstand extreme pressure and temperature conditions. The included Burger Motorsports DDP 5800 water/methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. Stealth Tank for G20 G22 & G80 M3 & G82 M4 BMW tucks neatly in the side pocket of your trunk! This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve available as well. Throw in a jug of boost juice to get on your way to power! Features & Benefits Included tank leaves trunk completely clear for full use of space Super low profile design tucks neatly into the existing left side trunk cavity 3.5 Gallon (13.25 liters) capacity Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance. DDP 5800 pump mounts directly to the tank Includes 2-way vented black plastic cap Includes all mounting hardware What's included: (1) Fuel-It! S58 Billet Fuel Rail (6) 550cc Fuel Injectors (1) 15' Stainless steel braided water/Methanol line with black nylon sheathing (1) BMS Water/Methanol Pump (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) -6AN ORB fitting (1) -6AN ORB plug (2) 1/8" NPT plugs (3) 14 x 1 Stainless steel screws to secure the rail to your manifold (1) Injector installation jig (1) 8 x 3/4" screw for the installation jig (1) 21/64 drill bit to open the factory injector bosses (1) Superlube® (1) BMS JB4 Port Injection Controller (7) Wire nuts (1) inline fuse holder (1) 12V Relay(1) 15' of red power wire (1) 15' of black power wire (1) 3.5 Gallon Stealth Tank (1) 2-way vented black plastic filler cap (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male (1) 18" of 1/4" nylon meth line (2) Powder coated stainless lower bracket (2) Rubber lower bracket grommets (2) BMS custom bell washers (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long (1) Plastic upper bracket (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) Billet 1/4 push male to -4AN male 90º (pump out) (1) 1/4 push male to female 90º (pump in) (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis) (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis) (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)

Show More Show Less

2.5 Gal. Water-Methanol Tank Upgrade - Quick-Connect Fittings ...

T#:598939

Part#: SNO-40014

In Stock at Vendor

$ 140.99 USD

Add to Wish List

Qty

$ 140.99 USD

Add to Wish List

Nozzle Holder Straight (Rectangle Style)

T#:21308474

Part#: SNO-900

Ships in 1 Business Day

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Straight, rectangular single nozzle holder. 1/8" NPT.

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

T#:21176934

Part#: BMS-WMI-SOL

Ships on Sep 16, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

Water/Methanol Nozzle - 2.5GPH

T#:21374122

Part#: SNO-N0250

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Snow Performance 7 Gallon Reservoir (incl. brackets/check valve/tubin...

T#:21374142

Part#: 40016

In Stock at Vendor

28% off MSRP $ 218.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 156.99 USD

Add to Wish List

Qty

28% off MSRP

$ 218.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 156.99 USD

Add to Wish List

Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol In...

T#:3047546

Part#: SNO-211

In Stock at Vendor

$ 702.99 USD

Add to Wish List

Qty

$ 702.99 USD

Add to Wish List

Snow Performance Methanol Injection Ring - All BMW

T#:589571

Part#: SNO-40111.40112

Ships in 2 Business Days

Starting at $ 359.98 USD

Add to Wish List

Starting at $ 359.98 USD

Add to Wish List

Choose either V-band or hose camp style rings to add methanol injection easily to almost any vehicle.

Boost Cooler Stage 2.5 Progressive Water/Methanol Injection Kit - no ...

T#:21374113

Part#: SNO-210-BRD-T

In Stock at Vendor

$ 687.99 USD

Add to Wish List

Qty

$ 687.99 USD

Add to Wish List

Snow Performance Water Tank Upgrade - 7gal

T#:21308472

Part#: SNO-40016-BRD

Ships in 2 Business Days

$ 260.99 USD

Add to Wish List

Qty

$ 260.99 USD

Add to Wish List

7 gal. water-methanol tank upgrade braided stainless line (w/brackets, solenoid, hose & all necessary fittings) (15lx17hx9w)

BMS 3.5 Gallon Stealth Water/Methanol Injection (WMI) Tank

T#:20815187

Part#: BMW35G28

Ships on Sep 16, 2026

Starting at $ 279.00 USD

Add to Wish List

Starting at $ 279.00 USD

Add to Wish List

Safe, sleek, and ready to install out of the box! Your choice of color and accessories! This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve (ES4714530) Burger Motorsports DDP 5800 water methanol alcohol Injection pump (ES4714532) Features & Benefits Leaves trunk completely clear for full use of space Super low profile design tucks neatly into the existing left side trunk cavity 3.5 Gallon (13.25 liters) capacity Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance. DDP 5800 pump mounts directly to the tank (pump sold separately) Tank dimensions: L 20.5" x W 11" X H 13.5" What's included: (1) Stealth Tank (1) 2-way vented black plastic filler cap (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male (1) 18" of line (2) Powder coated stainless lower bracket (2) Rubber lower bracket grommets (2) BMS custom bell washers (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long (1) Plastic upper bracket (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (2) 1/4 push male to female 90º to pump in (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis) (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis) (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)

Show More Show Less

Water Injection 26.5l Trunk Mounting Kit - ProLine

T#:37892117

Part#: SP30121PRO

Special Order: No Guaranteed ETA

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

Union Tee

T#:640585

Part#: 82040

Special Order: No Guaranteed ETA

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Super Atomizing Water/Methanol Injection Nozzles

T#:20815192

Part#: BMS.SA.WMI.NOZ

Ships on Sep 29, 2026

Starting at $ 40.00 USD

Add to Wish List

Starting at $ 40.00 USD

Add to Wish List

With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.

Show More Show Less