Turner Motorsport for BMW G82 M4 S58 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Turner Motorsport - Corporate Logo
T#:5471051
Part#: 00501TMS09
In Stock
Sale - Save 5% $ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD
Free Shipping
Sale - Save 5%
$ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD
Free Shipping
The stock Genuine BMW rear toe links (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Toe Links increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will effect toe settings, and the wide range of adjustment allows you to maximize grip on a track car and extend tire life on a street car. The factory rear toe arms utilize an eccentric bolt and washer for adjustment and lack precision and range. These toe links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. Best if tightened to 73.7 ft. lbs. (100 N/M). DO NOT OVERTORQUE! ECS is not liable for any issues due to overtorque. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA
Show More Show Less
High-Performance Ignition Service Kit - S58 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:21965997
Part#: TMSS58IGNKT
In Stock
Sale - Save 20% $ 500.99

This product was last offered at the strikethrough price on
06-14-2026

$ 401.09 USD
Free Shipping
Sale - Save 20%
$ 500.99

This product was last offered at the strikethrough price on
06-14-2026

$ 401.09 USD
Free Shipping
High-performance ignition kit for your S58 featuring spark plugs, Turner high-performance ignition coils, and dielectric grease to make sure you have no issues at your next maintenance interval! Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, and Spark). Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient, and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that gives your engine the performance and aesthetic you're looking for. Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engine's health, performance, and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy. Features and Benefits: Increased performance New spark plugs and grease Direct fitment Signature Turner Blue ignition coils
Show More Show Less
Turner Motorsport - Corporate Logo
T#:42604947
Part#: 036744LA
In Stock
Sale - Save 5% $ 1,810.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 1,719.58 USD
Free Shipping
Sale - Save 5%
$ 1,810.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 1,719.58 USD
Free Shipping

Harness unused potential. Drive with confidence. Engineered to maximize strength and cooling performance while utilizing the unused secondary factory differential mount for enhanced support and driveline stability.

Our Turner Motorsport Dual-Mount Differential Cover is purpose-built to reinforce one of the most critical components in the G8X M3/M4 drivetrain. From the factory, BMW includes a secondary bushing location in the rear subframe but leaves it unused. Our solution fully capitalizes on this overlooked feature, giving the differential a second point of support for improved rigidity, reduced movement, and enhanced driveline response under load.

This cover is more than just a mounting upgrade. It’s precision-machined from 6061-T6 billet aluminum for exceptional strength without unnecessary weight. An aggressive fin profile improves thermal efficiency, helping to lower fluid temperatures in high-stress environments. Inside, the cover features an embossed channel that mirrors the ring gear path, ensuring fluid stays in contact where it's needed most, improving cooling and lubrication in all conditions.

Whether you're carving corners on the street or pushing the limits on track, this differential cover is designed to keep your rear end cool, stable, and responsive.

Key Features and Benefits:

The dual-mount design utilizes the factory-provided secondary bushing location, adding critical support to reduce differential deflection, extend bushing life, and minimize wheel hop.
CNC-machined from 6061-T6 billet aluminum, offering high strength and a precise fit.
Built-in cooling fins increase surface area for improved heat dissipation and lower differential fluid temperatures.
Internally contoured to follow the ring gear profile, promoting consistent fluid coverage and effective lubrication.
Maintains a 1.1-liter fluid capacity, closely matching OEM specifications for ease of servicing.
Integrated -6 AN ports support the addition of an external differential cooler for increased fluid volume and extended service intervals.
Compatible with the factory differential fluid temperature sensor and includes provisions for 1/4” NPT aftermarket sensors.
Product Development:

Like all Turner Motorsport performance solutions, this differential cover was developed in-house by our dedicated Research and Development team. Designed, engineered, tested, and quality-inspected using advanced tools including FARO laser scanning for reverse engineering, SolidWorks 3D CAD modeling, in-house rapid prototyping, and extensive long-term testing, you can trust that this part meets the highest standards of fit, function, and durability.

From spirited street driving to full-throttle track days, the Turner Motorsport Dual-Mount Differential Cover ensures your G8X delivers the response, strength, and cooling capacity it needs when it matters most.

Show More Show Less

Turner Motorsport - Corporate Logo
T#:568465
Part#: 021460TMS02KT2
In Stock
Sale - Save 10% $ 217.99

This product was last offered at the strikethrough price on
06-14-2026

$ 196.10 USD
Free Shipping
Sale - Save 10%
$ 217.99

This product was last offered at the strikethrough price on
06-14-2026

$ 196.10 USD
Free Shipping
Our 10mm wheel spacers are lightweight, featuring a durable coating and quick release pockets for easy removal. Longer wheel bolts are required and included in this kit!

Turner 3.5" Universal Double Wall Exhaust Tip w/ Chrome Finish ...
10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:599665
Part#: 026374TMS02-01
In Stock
Sale - Save 3% $ 89.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.29 USD
Free Shipping
Sale - Save 3%
$ 89.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.29 USD
Free Shipping
Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model. Features & Specifications: 2.5" Inner Diameter 3.5" Outer Diameter Chrome Finish Double Wall Construction Angle Cut Style Includes Stainless Steel Exhaust Clamp
Show More Show Less
Turner Motorsport - Corporate Logo
T#:21275554
Part#: 049478LA03-04KT1
In Stock
Sale - Save 10% $ 227.96

This product was last offered at the strikethrough price on
06-14-2026

$ 205.16 USD
Free Shipping
Sale - Save 10%
$ 227.96

This product was last offered at the strikethrough price on
06-14-2026

$ 205.16 USD
Free Shipping
Universal exhaust tips with a swivel adjustability to fine tune your exhaust. 2.5" Inlet & a 3.5" Double Wall, Angle Cut Outlet

Turner 4" Universal Double Wall Exhaust Tip W/ Brushed Stainless Fini...
10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:5175772
Part#: 026374TMS02-12
In Stock
Sale - Save 11% $ 83.99

This product was last offered at the strikethrough price on
06-14-2026

$ 75.00 USD
Free Shipping
Sale - Save 11%
$ 83.99

This product was last offered at the strikethrough price on
06-14-2026

$ 75.00 USD
Free Shipping

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Brushed Finish
Double Wall Construction
Slant Cut Style
Includes Stainless Steel Clamp

Show More Show Less
Turner Motorsport - Corporate Logo
T#:13036529
Part#: 013859LA10
In Stock
Sale - Save 3% $ 2,042.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,981.70 USD
Free Shipping
Sale - Save 3%
$ 2,042.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,981.70 USD
Free Shipping
At Turner, all our Carbon Fiber Intake Systems are top-of-the-line custom-engineered products that we develop in house. Our G8x Intake is no exception. Turner Carbon Fiber Intakes start with a 3D scan of the factory intake and engine bay. Our engineers use these 3D images of the chassis to design the intake in SolidWorks modeling software. Using a Flow Bench, our Intake is then airflow tested against the factory intake, to ensure optimal airflow improvement against stock. The final product is a beautiful and functional Carbon Fiber Intake, CAD designed for perfect integration with the OEM inlet ducting and stock mounting locations and proven to flow better than factory.

Our G8x carbon fiber airbox sport entirely carbon fiber construction, with a removable carbon fiber lid for easy air filter access. Our enclosed carbon fiber intake systems are also proven to lower intake temps vs. open filter intakes. Plus, they further enhance the appearance of the engine bay, by adding more beautiful carbon fiber. The carbon airbox and lid is manufactured using 2X2 twill weave carbon fiber and protected with a gloss finish clear coat for UV resistance. The Best part? The airbox mount in the stock location with all supplied hardware included.

The oval intake tube design matches the OE look, allowing the intake to be used with the factory structural brackets that the intake goes through. However, the cross-sectional area of the Turner Carbon Fiber intake tube is greater than the stock intake tube, with a smooth interior for even better flow. The carbon intake tube is manufactured using 2X2 twill weave carbon fiber, and the intake tube is protected by a gloss finish clear coat for UV protection.

With the oval design of the intake tube, the custom air filter had to be designed for this intake system. The air filter is specially designed to seal against the carbon fiber airbox, eliminating any opening for hot air to enter the airbox! We created a conical hi-flow reusable air filter; featuring 8 ply oiled cotton gauze construction to maximize filtration efficiency. This filter features a Bellmouth (velocity stack) filter flange inlet to reduce turbulence in order to maximize flow.

Overall, the less restrictive intake design allows for more flow to the engine. The Drivers side Stock intake flows 336.2 CFM @ -15 inH20. The Drivers side Turner intake flows 374.3 CFM @ -15 inH20. This is about a 12% increase over stock The Passenger side stock intake flows 274.2 CFM @ -15 inH20.The Passenger side Turner intake flows 296.3 CFM @ -15 inH20. This is about an 8% increase over stock. Flows over 10% more air than factory intake system!

Our G8x M2/M3/M4 Carbon Fiber Intakes not only look great but they also really perform. Transform your vehicle's performance and appearance today!


Features:

Carbon fiber airboxes and intake tubes, with gloss clear coat for UV protection
CAD-Designed for perfect Integration
Includes Turbo Inlets
Custom high flow air filters specially designed to seal against the carbon fiber airboxes, eliminating any opening for hot air to enter the airboxes.
Key Benefits:

- CAD designed Intake System for perfect integration with the OEM inlet ducting and stock mounting locations.

Carbon Fiber Intake Tubes
- Carbon fiber intake tubes replace factory plastic turbo inlet pipes. The carbon tubes feature a smoother interior without corrugations for increased flow.

- The integrated carbon flange allows secure mounting of the tubes to the carbon air boxes.

- The intake tubes are manufactured using 2x2 twill weave carbon fiber for a great look in the engine bay.

- The inlet tubes are protected by a gloss finish clear coat for UV protection.

- The carbon intake tubes are connected to the turbo by a 4-ply reinforced silicone coupler and 6061-T6 black anodized aluminum flange that utilizes the factory o-ring and retaining clip.

Air Boxes
- Carbon fiber airboxes are manufactured using 2X2 twill weave carbon fiber and protected with a gloss finish clear coat for UV resistance to match the intake tube.

- Air box mounts in stock location with supplied hardware.

Air Filter
- Conical hi-flow reusable air filter; featuring 8 ply oiled cotton gauze construction to maximize filtration efficiency.

- Bellmouth (velocity stack) filter flange inlet to reduce turbulence in order to maximize flow.

Performance:

- The less restrictive intake design allows for more flow to the engine.

Drivers side Stock intake flows 336.2 CFM @ -15 inH20.

Drivers side Turner intake flows 374.3 CFM @ -15 inH20.

This is about a 12% increase over stock

Passenger side stock intake flows 274.2 CFM @ -15 inH20.

Passenger side Turner intake flows 296.3 CFM @ -15 inH20.

This is about an 8% increase over stock
Show More Show Less

Turner Stainless Steel Brake Lines - Rear - G80/G82/G83
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:2765526
Part#: 008614LA02
In Stock
Sale - Save 3% $ 107.99

This product was last offered at the strikethrough price on
06-14-2026

$ 104.75 USD
Free Shipping
Sale - Save 3%
$ 107.99

This product was last offered at the strikethrough price on
06-14-2026

$ 104.75 USD
Free Shipping
Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner - 3.5" Mirror Chrome Swivel Exhaust Tips - Set of 4
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:21275556
Part#: 049478LA03-01KT1
In Stock
Sale - Save 5% $ 267.96

This product was last offered at the strikethrough price on
06-14-2026

$ 254.56 USD
Free Shipping
Sale - Save 5%
$ 267.96

This product was last offered at the strikethrough price on
06-14-2026

$ 254.56 USD
Free Shipping
Universal exhaust tips with a swivel adjustability to fine tune your exhaust. 2.5" Inlet & a 3.5" Double Wall, Angle Cut Outlet
Turner Stainless Steel Brake Lines - Front - G80/G82/G83
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:2765525
Part#: 008614LA01
In Stock
$ 118.99 USD
Free Shipping
$ 118.99 USD
Free Shipping
Turner has developed a zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less
Turner Motorsport - Corporate Logo
T#:5471062
Part#: 00501TMS021
In Stock
Sale - Save 3% $ 300.99

This product was last offered at the strikethrough price on
06-14-2026

$ 291.96 USD
Free Shipping
Sale - Save 3%
$ 300.99

This product was last offered at the strikethrough price on
06-14-2026

$ 291.96 USD
Free Shipping
If you plan to upgrade your sway bar, we highly recommend complementing this purchase with the new Turner Performance Front Sway Bar End Links! While great for a daily driver, the stock BMW end links (31308091445 & 31308091446) aren't as strong as we'd desire them to be to stand up to demanding track use and abuse. These upgraded Adjustable End Links feature massive Teflon-lined FK 1/2" bearings to provide the highest load capacity for use with stiffer aftermarket sway bars. Heat-treated Chromoly High Misalignment Studs connect to the sway bar and offer extreme articulation capability (65 degrees) to prevent the end links from binding when used with different adjustment holes on aftermarket sway bars. Thanks to their adjustable design, these allow you to eliminate preload on the sway bars. Preload can result from uneven settling of springs or uneven suspension heights from corner weighting/leveling. Blue Anodized 6061-T6 Aluminum Turnbuckles work in conjunction with the left and right-hand threaded rod ends for simple and precise adjustment. NOTE: These end links are designed to work with vehicles that are at the stock ride height or slightly lowered (less than 1 inch).
Show More Show Less


Turner - 3.5" Mirror Chrome Swivel Exhaust Tips - Set of 2
Can be used on any 2.5" exhaust piping. Measure before ordering.
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:21275557
Part#: 049478LA03-01KT
In Stock
Sale - Save 5% $ 133.99

This product was last offered at the strikethrough price on
06-14-2026

$ 127.28 USD
Free Shipping
Sale - Save 5%
$ 133.99

This product was last offered at the strikethrough price on
06-14-2026

$ 127.28 USD
Free Shipping

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less
Turner S58 Gloss Carbon Fiber Engine Cover - G80 M3 G82 M4
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:6924284
Part#: 001644TMS01
In Stock
Sale - Save 10% $ 856.99

This product was last offered at the strikethrough price on
06-14-2026

$ 771.29 USD
Free Shipping
Sale - Save 10%
$ 856.99

This product was last offered at the strikethrough price on
06-14-2026

$ 771.29 USD
Free Shipping
At Turner we love the S58 and we love carbon fiber. The answer was clear we need to combine the two and the result is amazing. Our carbon engine cover looks so good on the S58 and can transform the appearance of your engine bay in just minutes. One of the first things you do with a new car is take care of all the simple modifications to get the best out car without taking it apart. Simply remove your factory engine cover and transfer the factory "M" badge on to your new carbon fiber engine cover and check one modification off the list! Our Turner S58 Carbon Engine cover starts with mold of the original engine cover to get the best factory-form fitment possible. The cover is made from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. Be sure to check out our other incredible carbon fiber pieces we offers to enhance your G80 M3 or G82 M4.
Show More Show Less
20mm Wheel Spacers - Black (Pair)
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:553912
Part#: 021460TMS03-08
In Stock
Sale - Save 20% $ 164.99

This product was last offered at the strikethrough price on
06-14-2026

$ 131.99 USD
Free Shipping
Sale - Save 20%
$ 164.99

This product was last offered at the strikethrough price on
06-14-2026

$ 131.99 USD
Free Shipping
20MM (.79 inch) Wheel Spacer for BMW G11, G30, I01, I12, F48, F90 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Spacer Specs: bolt pattern: 5 x 112 center bore: 66.56mm hubcentric: yes wheel pad size: normal
Show More Show Less

Turner Motorsport - Corporate Logo
T#:5471046
Part#: 00501TMS04
Ships on Feb 5, 2027
$ 672.99 USD
Free Shipping
$ 672.99 USD
Free Shipping
The stock Genuine BMW front "upper" control arms (31108095667 & 31108095668) are great for standard daily driving and occasional spirited driving, but tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics. In order to address this issue, Turner now offers new Performance Front Tension Rods with upgraded FK Spherical Bearings! These tension rods offer multiple benefits over stock control arms, helping to keep your BMW under control and on the track. The biggest upgrade over the stock control arm is the replacement of the rubber bushing with JMX hardened Teflon-lined low-friction FK Spherical Bearings. This allows for smooth control arm articulation, without the standard mushy feel you'd expect from rubber bushings. As a result, you get a more responsive feel that inspires confidence lap after lap! The PTFE liner is chemically bonded to the inner diameter of the race. The liner offers a very high load carrying capacity and has greatly increased dynamic wear characteristics, offering robust reliability for both street and track use. Another benefit of these Performance Tension Rods is increased caster adjustment, allowing precise alignment for optimal turn-in response and to compensate for variances between left and right caster. Adjustable Tension Rod Features: Gun drilled and Blue Anodized 2024 Aluminum links to reduce unsprung weight Rotating 6061-T6 Aluminum Clamp design Hardened JMX high misalignment low friction 3-piece Teflon lined FK Heim joints/rod ends Stainless steel anti-dive spacers ASTM A574 socket head cap bolts are used for maximum articulation with a minimum tensile strength of 170,000 psi Sold as a pair. Made in the USA.
Show More Show Less

Turner Motorsport - Corporate Logo
T#:20551649
Part#: 008621LA03-01
In Stock
Starting at $ 1,105.99 USD
Free Shipping
Starting at $ 1,105.99 USD
Free Shipping

Performance Catback Exhaust for pure unrestricted power and sound. This exhaust takes out all of the stop gates and pairs with the S58 for an iconic driving experience.

If you have driven an S58 car, even in stock form it feels like the sky is the limit.(If you haven't driven one, we are not sure why you are even looking into this exhaust)

When your driving an S58 equipped car such as the G80 M3 you can put your foot to the floor and it feels like the car would keep going and going, possibly with no limit. The G80 driving experience is great but there is always room for improvement. if dropping over 40lbs from just your exhaust and the gain in flow alone aren't enough to sell you, no problem. From enhancing the exhaust with smoother flow paths and taking out the bulky and restrictive muffler we saw gains up to 10hp and 14lb of torque on the stock ecu with zero tuning. Now that there are options for plug and play tunes as well as unlocking your ECU for custom tuning there is a much larger upside for power improvements. You will have to find the other restrictions holding you back from more power because it wont be the exhausts fault, this is as free flowing as it gets.

Here at Turner our mission was to amplify the G80/G82 with a proper catback exhaust system. To accomplish this goal, our engineers increased flow, reduced weight by 26lbs, and delivered an exhaust system that captures the full unrestricted sound of the sonorous twin turbo inline-6 S58 engine. The increase in flow was gained from dual 3.0" 304 stainless steel exhaust pipes that feed into straight-through free flowing rear section. We specifically designed this catback with flow in mind to ensure the exhaust would never be a restriction. Weight reduction is achieved by replacing the factory piping with lightweight 304ss for a more-than-modest weight advantage. The best part of the Race Inspired catback is the capability to perform far beyond the point that the factory exhaust. All of this plus the direct fitment and straight forward installation leads to our Turner Race Inspired Catback exhaust being the clear answer in your mission to find the best exhaust for your S58 powered G80 or G82.

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
3.0"OD Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Weight savings over the OEM exhaust system:
OEM Catback (without tips): 62 lbs
Turner Stainless Race Catback (without tips): 36 LBS!
26 lb weight reduction!
Performance:

Mid range torque and power increase 3600-4200 RPM
Torque gains: +14 ft/lbs @ 3850 RPM
Horsepower gains: +10 HP @ 3850 RPM
Smoother horsepower and torque delivery from 3000-6500 RPM
26 lb weight reduction for faster 0-60 ​
Performance Paired with Turner S58 Intake:

Mid range torque and power increase 3600-4200 RPM
Torque gains: +23 ft/lbs @ 3850 RPM
Horsepower gains: +17 HP @ 3850 RPM
All increases in power and torque were done a stock ECU with no tuning.

Kit Contents:

Dual 3" 304SS Exhaust piping from secondary cats.
X pipe replacing middle muffler sections for better sound, performance and weight savings.
Straight through "Race inspired" rear section
Optional Turner Slant Cut or Straight Cut Exhaust tips - 3.0" Inlet, 4.0" Outlet
Clamps and Hardware for an OEM+ install
Optional Exhaust Pipe Hanger Removal Pliers

Show More Show Less
Turner Motorsport - Corporate Logo
T#:5471061
Part#: 00501TMS020
In Stock
Sale - Save 3% $ 910.99

This product was last offered at the strikethrough price on
06-14-2026

$ 883.66 USD
Free Shipping
Sale - Save 3%
$ 910.99

This product was last offered at the strikethrough price on
06-14-2026

$ 883.66 USD
Free Shipping
The stock Genuine BMW front "lower" control arms (31108095665 & 31108095666) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics. In order to address this issue, Turner now offers new Performance Adjustable Front Lower Control Arms! These control arms offer multiple benefits over stock control arms, helping to keep your BMW under control and on the track. In order to get the most out of your BMW M3/M4, these new control arms provide roll center, camber, and track width adjustment to dial in your alignment for optimal handling! Additionally, the ball joint angle has been corrected to allow for full articulation. Stainless Steel spacers are provided to correct roll center for lowered vehicles. The use of FK Rod Ends and High Misalignment Spherical Bearings eliminates the flex and binding found in the OEM control arms while allowing smooth articulation. Another great feature of these control arms is the Double Adjuster Lock Down. This allows camber and track width settings to be adjusted and locked in without the use of finicky jam nuts. This double adjuster is machined from 4130 Chromoly; gun-drilled to reduce weight, then electroless nickel plated for corrosion resistance. A ride height sensor bracket is also integrated to maintain factory ride height sensor location, regardless of the length of the arm to keep BMW's chassis electronics happy. Front Lower Control Arm Features: Lightweight 6061-T6 Billet Aluminum Electroless nickel plated 4130 Chromoly Double Adjuster for quick adjustment Correct ball joint angle for full articulation Rotating Clamp design allows for easy access to lock down alignment settings Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends Multiple size Stainless Steel roll center spacers for precise adjustment Sold as a pair. Made in the USA.
Show More Show Less

Turner Motorsport Double Wall Slash Cut Exhaust Tip - 2.75 Inlet - 3....
10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:9383738
Part#: 026732TMS02-10
In Stock
Sale - Save 8% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.49 USD
Free Shipping
Sale - Save 8%
$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.49 USD
Free Shipping
Introducing the beautiful Mirrored Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads!
Show More Show Less
Turner Motorsport - Corporate Logo
T#:553910
Part#: 021460TMS03-01
In Stock
Sale - Save 3% $ 145.99

This product was last offered at the strikethrough price on
05-03-2026

$ 141.61 USD
Free Shipping
Sale - Save 3%
$ 145.99

This product was last offered at the strikethrough price on
05-03-2026

$ 141.61 USD
Free Shipping
Our 12.5mm wheel spacers are lightweight, featuring a durable coating and quick release pockets for easy removal. Longer wheel bolts are required!

Turner Motorsport - Corporate Logo
T#:637496
Part#: 007340LA02
In Stock
Sale - Save 3% $ 132.99

This product was last offered at the strikethrough price on
06-14-2026

$ 129.00 USD
Free Shipping
Sale - Save 3%
$ 132.99

This product was last offered at the strikethrough price on
06-14-2026

$ 129.00 USD
Free Shipping
What is often mistaken for brake fade or fluid boiling, can actually be rubber brake lines expanding under pressure. Even when brand new, factory rubber brake hoses expand under pressure, requiring increased fluid volume and more pedal travel for the desired stopping force. This expansion is even more prominent in aged and weathered rubber hoses. Turner Motorsport Stainless Steel brake lines are engineered and assembled with braided stainless steel mesh and offer superior expansion resistance and reinforcement. The resistance to expansion creates a firmer pedal, and a more direct pedal feel. The signature blue polymer coating provides additional protection from the elements and abrasion, which is common with the constant movement of suspension and braking systems. When you buy brake lines, you want them to last for years to come. Conventional SS lines will corrode the first time they are exposed to water, regardless of how much you spend. Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake line also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel! All Turner brake lines are engineered to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are manufactured on dedicated, DOT-compliant brake equipment and each is tested to 3000 psi before being shipped. Turner Motorsport stocks a huge inventory of premium brake components, including pads, rotors, shoes, drums, hoses, hard lines, fluids, hardware, hi-temp lubricants, all the way up to complete brake rebuild kits. Everything you need to perform a professional quality brake service, you can find at Turner Motorsport! Technical features: Fully compliant with DOT Standards (MVSS-1006) Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) Zinc-Nickel coating for maximum corrosion resistance Low profile connectors for clean and recessed look
Show More Show Less

Turner Motorsport - Corporate Logo
T#:10518788
Part#: 026374TMS02-12KT
In Stock
Sale - Save 8% $ 335.99

This product was last offered at the strikethrough price on
06-14-2026

$ 310.36 USD
Free Shipping
Sale - Save 8%
$ 335.99

This product was last offered at the strikethrough price on
06-14-2026

$ 310.36 USD
Free Shipping

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Brushed Stainless Finish
Double Wall Construction
Slant Cut Style
Includes Stainless Steel Clamp

Show More Show Less
Turner Motorsport - Corporate Logo
T#:10518787
Part#: 026374TMS02-08KT
Ships on Oct 29, 2026
Sale - Save 5% $ 383.96

This product was last offered at the strikethrough price on
06-14-2026

$ 364.76 USD
Free Shipping
Sale - Save 5%
$ 383.96

This product was last offered at the strikethrough price on
06-14-2026

$ 364.76 USD
Free Shipping

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Polished Black Chrome Finish
Double Wall Construction
Slant Cut Style
Includes Stainless Steel Clamp

Show More Show Less
Turner Motorsport Silver Wheel Spacer & Bolt Kit - 12.5mm
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:568470
Part#: 021460TMS03KT2
In Stock
Sale - Save 3% $ 193.94

This product was last offered at the strikethrough price on
06-14-2026

$ 188.12 USD
Free Shipping
Sale - Save 3%
$ 193.94

This product was last offered at the strikethrough price on
06-14-2026

$ 188.12 USD
Free Shipping
12.5MM (.49 inch) Wheel Spacer for BMW G11, G30, I01, I12, F48, F90 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market! Turner Wheel Spacer Features -- + hub-centric design, 1-piece spacer + precise tolerance fitment thanks to CAD process and CNC mill machine + aerospace grade aluminum light weight but very strong with a high resistance to corrosion + additional military-spec hardcoat for further corrosion resistance + innovative Quick Release pockets for easy removal (better than a chamfered back edge) + laser engraved size and part number for easy identification + stealthy anthracite or black color + extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) + Turner Motorsport track and street tested! + Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: (click to expand) How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: (click to expand) Spacer Specs: bolt pattern:5 x 112 center bore:74.1mm hubcentric?yes wheel pad size:normal Year & Model Applications (click to expand)
Show More Show Less


Turner Motorsport Gift Cards
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:350917
Part#: TMSGC
In Stock
Starting at $ 5.00 USD
Free Shipping
Starting at $ 5.00 USD
Free Shipping

Turner Motorsport has Gift Cards available for everyone on your shopping list! They are available in any amount you choose - simply select your denomination, add to cart, and you're off to the races.

Each Turner Motorsport Gift Card features a dramatic photograph of a Turner Motorsport BMW.

Show More Show Less
Turner Motorsport Racing Sticker Pack - Choose Your Color
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:41492594
Part#: TMSSTICKERPK
Ships in 4 Business Days
Sale - Save 25% $ 25.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 19.49 USD
Free Shipping
Sale - Save 25%
$ 25.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 19.49 USD
Free Shipping
We race our BMWs and we want to help you race your own! Sign up for our Race Credit Program and take advantage of in-store credit to help keep you and your BMW on track.