Fuel Pump for BMW G87 M2 S58 3.0L

Clear BMW chassis

Please ensure your correct model is selected

BMW fuel pumps run at a very high pressure in order to properly supply the injectors with fuel. A failed pump will allow the car to crank, but wont kick over. Turner Motorsports carries Genuine BMW pumps that will have you back on the road in no time.
Sort By:

DeatschWerks 340 LPH In-Tank Fuel Pump with a Universal Set Up Kit ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
This is Universal and Not a direct replacement for the Genuine Pump!
DeatschWerks - Corporate Logo
T#:6091453
Part#: 9-301-1000
In Stock
$ 169.00 USD
Free Shipping
$ 169.00 USD
Free Shipping
DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. The DW300 is DeatschWerks' flagship standard fitment in-tank pump. The DW300 flows 340lph at 40psi and is a popular choice for e85 applications or wherever the highest flowing standard fitment in-tank pump is needed. Quiet operation and pulse width modulation compatibility are delivered via the turbine impeller and computer balanced armature. E85 compatibility is built in via the carbon commutators and a fully encapsulated armature. All DW fuel pumps are backed by a 3-yr no fault warranty. Features: Weight 12.6 oz (360grams) 7.7mm ID/11mm OD inlet fitting Outlet 5/16" Hose Clamp Single Scroll Composite Turbine All instructions are also provided on DeatschWerks' website.
Show More Show Less
DeatschWerks 255 LPH In-Tank Fuel Pump W/ Universal Set Up Kit ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.
DeatschWerks - Corporate Logo
T#:34919033
Part#: 9-201-1000
In Stock
$ 112.99

This product was last offered at the strikethrough price on
01-22-2026

$ 109.00 USD
Free Shipping on orders $49 and up
$ 109.00 USD
Free Shipping on orders $49 and up
Supra HPD6 High Pressure Fuel Pump - Bosch
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Bosch - Corporate Logo
T#:13069374
Part#: 13518631642
In Stock at Vendor
$ 727.94 USD
Free Shipping on orders $49 and up
This is the stock fuel pump from the Toyota Supra B58. It is designed to flow significantly more than the one that came in your 3 series and will allow you to reach high horsepower levels without the risk of running lean.
Show More Show Less

G-Series BMW & Supra A9x Billet Fuel Pump Top Hat
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:38161730
Part#: 601-0316
In Stock
$ 305.99

This product was last offered at the strikethrough price on
01-22-2026

$ 299.99 USD
Free Shipping on orders $49 and up
$ 299.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks BMW G-Series & A9x Toyota Supra Billet Tophat maximizes fuel system performance with up to three high-flow ports and 12-wire compatibility, offering versatile pump configurations to suit any setup.
Show More Show Less

Walbro Ultra High-Performance Fuel Pump - (Universal E85 Ethanol) - T...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Walbro - Corporate Logo
T#:23020149
Part#: F90000295
Back Ordered
$ 203.99 USD
Free Shipping on orders $49 and up

New DCSS 39/50 High-Performance Pump – F90000295

  • Highest flow in-tank brushed fuel pump offering from TI Automotive / Walbro
  • No Internal check valve - ideal for racing applications to build oil pressure prior to start-up
  • Featuring award-winning DCSS technology
  • E85 compatible
  • High-pressure relief setting - supports supercharger and turbo applications
  • Capable of supporting 900+HP at 60PSI naturally aspirated applications
  • Complete Pump and kit combination – TCD495

Fuel: GAS & E85

Horsepower: 900+ at 60PSI, naturally aspirated applications

Over All Pump Length: 131mm

Main Housing Diameter: 39mm

Lower Housing Diameter: 50mm

Fuel Inlet Diameter: 11mm OD

Fuel Outlet Diameter: 11mm OD

Flow Rate: 535LPH at 40psi

Test Voltage: 13.5 Volts

Show More Show Less
Precision Raceworks Universal Adjustable Fuel Pressure Regulator W/ 1...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:38195449
Part#: 501-0043
In Stock
$ 159.99 USD
Free Shipping on orders $49 and up
Adjust your fuel pressure as needed. Thanks to the 1:1 boost reference, fuel pressure will increase as boost pressure increases, ensuring fuel delivery remains optimal under all conditions.

Vader Solutions Low Pressure Fuel Pump Upgrade - G42 G20 G22 B58, G80...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vader Solutions - Corporate Logo
T#:37251110
Part#: VSLPFPB58S58
Special Order: No Guaranteed ETA
$ 650.00 USD
Free Shipping on orders $49 and up
Introducing the Vader Solutions Fuel System Upgrade for S58 powered M2, M3, and M4's and G-Chassis B58 models. This uses the same design and engineering that went into developing our popular A90 Supra Fuel System Upgrade. This kit is the best solution in terms of fueling, no additional fuel lines required outside of the fuel tank. The stock G-Series fuel line is 3/8" already from the factory, no need to replace that and add a regulator. BMW from the factory uses an electronic dampener/regulator combo, so this eliminates the need for aftermarket FPR. Super smooth install once the pump is removed and wiring is a breeze. We also DO NOT use zip-ties like the competitors do. We made it easy for you guys no matter what setup you're running in terms of fuel pump activation. Fuel System upgrade is required over 500-550WHP
Show More Show Less
Multi-Pump Fuel Surge Tank (MPFST)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Radium Engineering - Corporate Logo
T#:31059457
Part#: 20-1440
In Stock at Vendor
$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping

DeatschWerks DW400 In-Tank Fuel Pump W/ Universal Set Up Kit ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
DeatschWerks - Corporate Logo
T#:5389791
Part#: 9-401-1001
In Stock at Vendor
$ 239.00 USD
Free Shipping
$ 239.00 USD
Free Shipping
The DW400 surpasses the 400LPH benchmark by delivering an industry leading in-tank flow of 415LPH at 40psi. Even more importantly, the DW400 delivers 31% more flow than its nearest competitor, the Walbro 450 "e85", at pressures between 70 and 100 psi. The DW400 has a 46mm diameter width and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.
Show More Show Less

Vacuum Gauge and Fuel Pump Tester
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Lisle - Corporate Logo
T#:5498468
Part#: 20300
In Stock at Vendor
$ 52.99

This product was last offered at the strikethrough price on
05-07-2026

$ 50.99 USD
Free Shipping on orders $49 and up
$ 50.99 USD
Free Shipping on orders $49 and up
A must have
Precision Raceworks Upgraded Hybrid Primary Fuel Pump - Stage 2.5 - G...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:38161754
Part#: 622-0284-G8X
Ships on Jun 19, 2026
$ 999.99 USD
Free Shipping on orders $49 and up
Precision Raceworks' G-Series G8x High-Performance Primary Fuel Pump Kits are designed for enthusiasts running all blends of E85. They are also perfect for those seeking a streamlined setup with a single fuel line supplying both the high-pressure fuel pump and port injection. This Stage 2.5 bucketed/bucketless hybrid fuel pump kit delivers 486 LPH at 5 Bar and includes everything needed for a quick and hassle-free upgrade for your stock pump. It retains the OEM brushless pump inside the bucket while integrating a Walbro 525 (F90000285) fuel pump externally, supporting up to 950whp on pump gas and 900whp on 100% E85.
Show More Show Less
Stage 3 Low Pressure Fuel Pump
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Spool Performance - Corporate Logo
T#:28604061
Part#: SP-S58-S3LPFP
Special Order: No Guaranteed ETA
$ 1,399.00 USD
Free Shipping on orders $49 and up


PFS F97/F98 Drop In Brushless LPFP Upgrade - 1000whp Capable ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:26938343
Part#: PFS-LPFP-X3/4M-N
Ships on Jun 19, 2026
$ 1,763.99 USD
Free Shipping
$ 1,763.99 USD
Free Shipping
PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for the F9X X3/4M. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every single pump is then fully tested on our flow bench to ensure proper function before shipping -you’re going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Brand new build: You keep your old pump, we send you a brand-new PFS bucket
Show More Show Less
Precision Raceworks Stand Alone Auxiliary Fuel System - Dual Walbro 5...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:35559421
Part#: 601-0341
Ships in 9 Business Days
$ 2,172.99

This product was last offered at the strikethrough price on
05-13-2026

$ 1,949.99 USD
Free Shipping on orders $49 and up
$ 1,949.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks M2/M240i (G87/G42) Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection! Since direct injection came out on modern BMWs, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory-programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential. Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check. With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on! Features & Benefits Billet Aluminum top hat with 3 high-flow fuel ports Dedicated fuel pump(s) for port injection system Optimal pump location resistant to fuel slosh under acceleration Fully adjustable 1:1 scaling billet fuel pressure regulator 10-micron USA made Microglass fuel filter (Ideal for E85) Smooth bore high flow PTFE fuel feed & return lines (AN6) All billet connections for both fuel line fittings and top-hat Plug and play connectors inside and outside* the top hat Configurable pump activation harness (see instructions for more details) Increased injector flow (when using 1:1 regulator feature vs static) Compatible with all stock or upgraded primary fuel pumps Easily expandable and upgrade-able for more fuel All components and parts feature 100% Ethanol Compatibility The AFS.800 dedicated auxiliary fuel system comes with all** necessary components to provide dedicated fuel system for port injection. Featuring Two Walbro 535’s (F9000295) fuel pumps with a combined flow of 800LPH at 3 bar. Pump flow 43.5 psi-a : 800 lph Recommended base pressure: 43.5 psi-g Maximum Fuel Pressure: 110 psi-g Number of Fuel Output Ports: 2 Number of Fuel Return Ports: 1 Pump 1: Walbro 535 (F90000295) Pump 2: Walbro 535 (F90000295) Available (unused) Electrical Connections: 2* Total System Weight:14 lbs (including fuel lines and wiring harness) **The AFS kits are designed for use with a port injection kit where the fuel rail is mounted above the manifold. To use with a plate-style spacer PI, please reach out to us directly at 713-770-6977 or [email protected]
Show More Show Less
Precision Raceworks Upgraded Hybrid Primary Fuel Pump - Stage 2 - G80...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:38161753
Part#: 601-0289-G8X
Ships in 10 Business Days
$ 649.99 USD
Free Shipping on orders $49 and up
Precision Raceworks' G-Series G8x High-Performance Primary Fuel Pump Kits are designed for enthusiasts running all blends of E85. They are also perfect for those seeking a streamlined setup with a single fuel line supplying both the high-pressure fuel pump and port injection. This Stage 2 bucketed/bucketless hybrid fuel pump kit delivers 450 LPH at 5 Bar and includes everything needed for a quick and hassle-free upgrade from the stock pump. It retains the OEM brushless pump inside the bucket while integrating a Walbro 450 (F90000274) fuel pump externally, supporting up to 850whp on pump gas and 800whp on 100% E85.
Show More Show Less

Precision Raceworks Stand Alone Auxiliary Fuel System - Walbro 535 Pu...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:35559420
Part#: 601-0342
Ships in 10 Business Days
$ 1,574.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks M2/M240i (G87/G42) Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection! Since direct injection came out on modern BMWs, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory-programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential. Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check. With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on! Features & Benefits Billet Aluminum top hat with 3 high-flow fuel ports Dedicated fuel pump(s) for port injection system Optimal pump location resistant to fuel slosh under acceleration Fully adjustable 1:1 scaling billet fuel pressure regulator 10-micron USA made Microglass fuel filter (Ideal for E85) Smooth bore high flow PTFE fuel feed & return lines (AN6) All billet connections for both fuel line fittings and top-hat Plug and play connectors inside and outside* the top hat Configurable pump activation harness (see instructions for more details) Increased injector flow (when using 1:1 regulator feature vs static) Compatible with all stock or upgraded primary fuel pumps Easily expandable and upgrade-able for more fuel All components and parts feature 100% Ethanol Compatibility The AFS.460 dedicated auxiliary fuel system comes with all** necessary components to provide a dedicated fuel system for port injection. Featuring a single Walbro 535 (F9000295) fuel pump which flows 460LPH at 3 bar. Pump flow 43.5 psi-a : 460 lph Recommended base pressure: 43.5 psi-g Maximum Fuel Pressure: 110 psi-g Number of Fuel Output Ports: 2 Number of Fuel Return Ports: 1 Pump 1: Walbro 535 (F90000295) Pump 2: N/A Available (unused) Electrical Connections: 4* Total System Weight: 11 lbs (including fuel lines and wiring harness) **The AFS kits are designed for use with a port injection kit where the fuel rail is mounted above the manifold. To use with a plate-style spacer PI, please reach out to us directly at 713-770-6977 or [email protected]
Show More Show Less

Precision Raceworks Stand Alone Auxiliary Fuel System - Dual Walbro 4...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:47679265
Part#: 601-0350
Ships in 10 Business Days
New Item
$ 1,799.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks M2/M240i (G87/G42) Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection! Since direct injection came out on modern BMWs, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory-programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential. Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check. With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on!
Show More Show Less
Supra HPD6 High Pressure Fuel Pump
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bremmen Parts - Corporate Logo
T#:53997748
Part#: 13518631642
Special Order: No Guaranteed ETA
New Item
Sale - Save 20% $ 399.99

This product was last offered at the strikethrough price on
05-30-2026

$ 319.99 USD
Sale - Save 20%
$ 399.99

This product was last offered at the strikethrough price on
05-30-2026

$ 319.99 USD
Oem upgraded fuel pump

PFS G8X Drop In Brushless LPFP Upgrade - 1000whp Capable
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:26938293
Part#: PFS-LPFP-G8X-NEW
Back Ordered
$ 1,763.99 USD
Free Shipping
$ 1,763.99 USD
Free Shipping
PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for G -Series S58. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every single pump is then fully tested on our flow bench to ensure proper function before shipping -you’re going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Brand new build: You keep your old pump, we send you a brand new PFS bucket
Show More Show Less