Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.
This product was last offered at the strikethrough price on
05-13-2026
A faulty camshaft position sensor will result in timing issues and rough idle/engine operation or light up the check engine light. Get rid of your check engine light and restore smooth operation with this OEM VDO sensor.
OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x8.5" |
| Offset (mm): | 35 |
| Weight (lbs): | 21.9 |
| Profile: | 1, minimal dish |
| Wheel Specs | |
| Fitment: | Front or Rear |
| Size: | 19x8.5" |
| Offset (mm): | 35 |
| Weight (lbs): | 21.9 |
| Profile: | 1, minimal dish |
MINI R56 Front Left Loaded Front Strut provides a convenient and efficient solution for replacing your vehicle’s front strut, spring, and strut mount. This pre-assembled unit eliminates the need for special disassembling tools, as it comes fully assembled, allowing for a quicker and easier installation with standard hand tools.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
MINI R53 Loaded Front Strut - Front Right offers a convenient solution for replacing your front strut, spring, and strut mount with a pre-assembled unit. This fully assembled strut assembly eliminates the need for special disassembling tools, allowing for a quick and easy replacement using standard hand tools.
MINI R53 Loaded Front Left Strut offers a convenient, pre-assembled solution for replacing your front strut, spring, and strut mount. This fully assembled unit eliminates the need for special disassembling tools, allowing for a quick and straightforward installation with standard hand tools.
BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.
CI-R wheels consist of a pressure cast wheel surface and a flow formed rim structure. Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.
Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Satin Black and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.
Please Note: Aggressive fitment, may require fender rolling or pulling.
Specs:
This product was last offered at the strikethrough price on
05-03-2026
A faulty throttle body can cause poor engine operation or even complete failure to function. Replace your malfunctioning throttle body with a high quality OEM VDO unit to restore proper engine operation.
OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
MINI R56 Vacuum Pump VP00070 - 11668654605 is a high-quality metal control pump designed to mount to the side of the cylinder head block near the end of the cam. It is an ideal replacement for a noisy or malfunctioning unit, ensuring reliable operation and efficiency.
If your BMW encounters fuel pressure loss or starting problems despite having spark and a well-functioning engine, this unit, housed within the fuel tank, is a common replacement. Featuring a fuel pressure pump and a level sensor, this component ensures optimal running conditions for your vehicle. Please note, the product may come packaged as VDO or Continental.
Upgrade your Mini's worn-out axles with these high-quality replacement axle assemblies from GSP. Featuring new boots, CV joints, and shaft, these assemblies guarantee years of reliable service, keeping your Mini running smoothly on the road. Don't risk a broken axle or CV joint leaving you stranded – replace them today with GSP replacement axle assemblies. Plus, with no core charge, it's a hassle-free upgrade for your Mini's manual transmission.
Revitalize your Mini with GSP's Replacement Axle Assemblies, a perfect solution for worn-out axles. Featuring new boots, CV joints, and shaft, these assemblies ensure years of reliable service. Crafted by the same experts who manufactured your car's original equipment, these replacements guarantee factory-like performance. Don't risk a potential breakdown due to a failing axle or CV joint. Upgrade today to avoid unforeseen problems. This brand new axle shaft assembly doesn't require returning the old axle, as there's no core charge.
Elevate your BMW's BBS wheels with these replacement center caps, precisely fitting the 70mm specifications. These high-quality replacements are designed to seamlessly replace your existing center caps, providing a perfect fit for BBS wheels.
BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.
LM wheels consist of a pressure cast wheel surface and a flow formed rim structure. Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.
Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Silver with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.
Please Note: Aggressive fitment, may require fender rolling/pulling.
Specs:
This product was last offered at the strikethrough price on
06-22-2026
This product was last offered at the strikethrough price on
06-22-2026
This product was last offered at the strikethrough price on
08-26-2026
This product was last offered at the strikethrough price on
07-02-2026