ECS Tuning Silicone Turbo Inlet Hose – MINI Cooper S/JCW N14 (R55-R59)

Upgrade your MINI Cooper N14 with our high-flow silicone turbo inlet hose, featuring increased internal volume for greater airflow, a smooth interior finish for an uninterrupted flow path, and more available air for your turbo to consume, resulting in enhanced performance and throttle response.

Unlike the factory plastic inlet hose, which degrades over time and was never engineered with performance in mind, the ECS Tuning replacement features a durable, 4-ply silicone construction with wire reinforcement to handle higher temperatures and boost levels. Reinforced sections help prevent flex and collapse under load, and a smooth internal profile with a counterbored outlet reduces turbulence for optimized airflow to the turbocharger.

ECS Tuning also addresses a known issue where the OEM hose can walk off the turbo inlet and ingest the included gasket, often leading to premature turbo failure. This upgraded design provides a much more secure fit and peace of mind for performance-minded MINI owners.

Product Features

Constructed from heavy-duty, 4-ply fiberglass-reinforced silicone

Designed to resist collapse, distortion, and degradation from heat, oil, and fuel exposure

Smooth interior walls and gradual taper ensure unimpeded, efficient airflow

Includes spacers/adapters to accommodate factory or common upgraded turbo sizes

Gloss black finish adds a clean, high-performance appearance to the engine bay

Stainless steel smooth-band hose clamps are included for secure installation

Engineered to handle continuous operating temperatures up to 250°F

Direct replacement for the OE turbo inlet hose—no tuning required

Kit Includes

(1) Silicone turbo inlet hose
(2) Silicone turbo inlet rings for size adaptation
(3) Smooth-band stainless steel hose clamps
Engineering and Development
Designed, tested, and quality-inspected at ECS Tuning’s in-house R&D facility in Wadsworth, Ohio. Utilizing precision tools like FARO laser scanning, SolidWorks 3D CAD modeling, and in-house rapid prototyping, ECS ensures perfect fitment and long-term durability.

Installation Notes
Installation is simple and fully reversible. Remove the stock inlet hose and install the ECS silicone hose using the included clamps and spacers as needed. No permanent modifications required.

Not legal for sale or use in California on any pollution-controlled motor vehicle in accordance with the California Air Resources Board (CARB).

Upgrade your Mini's performance with the M7 Speed COLD SIDE Intercooler Elbow Kit paired with the HOT SIDE Charge pipe in striking BLACK color. This comprehensive intercooler pipe kit optimizes airflow, ensuring maximum flow and minimal pressure drop from the turbo to the throttle body. Crafted from premium four-ply fabric reinforced 100% silicone material, this kit not only boosts power and throttle response but also enhances the under-hood aesthetics of your vehicle. By replacing OE parts, it eliminates high boost failures and removes the OE hose side muffler and cold side sound chamber for improved throttle response and increased mid-range to top-end power. The kit includes six high-quality lined stainless steel clamps, providing a complete solution for installation using basic hand tools.

• Maximizes airflow for increased power
• Improves throttle response and mid-range to top-end power
• High-quality four-ply fabric reinforced 100% silicone material
• Enhanced under-hood appearance
• Eliminates OE hose side muffler and cold side sound chamber
• Complete kit for easy installation with basic hand tools

Elevate your MINI's performance with this single piece CNC mandrel bent intake pipe, designed as a seamless replacement for the stock plastic intake pipe and its restrictive resonator. Crafted at the Forge UK HQ in Gloucester, this high-flow intake pipe offers enhanced airflow and can be seamlessly integrated with the OEM air box or the full Forge intake system (FMINDF56). The intake pipe boasts CNC machined outlets, ensuring a hassle-free direct fit for any OEM plug-in components like the blow by heater and vacuum take off.

Highlights:

• Precision-machined Turbo inlet coupler ensuring a good seal is achieved at the turbo inlet.
• High-quality 3-ply Silicone hose bellows design to allow for any engine movement.
• Single piece CNC mandrel bent pipe.
• CNC machined outlets.

MINI R55 to R61 CTS Turbo MINI Cooper S/JCW Throttle Pipe is designed to enhance your vehicle's performance by upgrading the factory throttle body inlet hose. This kit features a high-quality silicone throttle body inlet hose, designed to replace the stock hard plastic component for improved airflow and durability.

• High-Quality Silicone Construction: Provides superior flexibility and strength compared to factory hoses.
• Enhanced Airflow: Improves the efficiency of the throttle body by allowing smoother airflow.
• Durability: Resists high temperatures and pressures, ensuring long-lasting performance.
• Easy Installation: Direct replacement for the stock hose, with no modifications required.

This throttle pipe kit is an excellent choice for both performance enthusiasts and daily drivers seeking to boost the reliability and efficiency of their MINI Cooper S/JCW.

Upgrade your Mini's intake system with the M7 Speed Silicone Intake Hose Kit, including the intake boot, hot side boot, and cold side elbow kit. Crafted from 100% silicone materials resistant to oil and chemicals, this kit offers superior durability, improved airflow, and virtually unlimited service life. Benefits include:

• Direct OE replacement part for easy installation.
• Superior durability and airflow compared to stock parts.
• Retains stock PCV connection location and size.
• No modifications or cutting required for installation.
• 33% larger inside flow volume for enhanced performance.
• Available in four standard M7 colors for customization.
• Easy DIY installation with included stainless steel clamps and instructions.

Upgrade Your MINI with the M7 Speed Cold Side Lower Intercooler Elbow

Introducing the new Cold Side Lower Intercooler Elbow by M7 Speed for all Generation 2 MINI Coopers equipped with a 1.6-liter turbocharged engine. Crafted with the same high-quality four-ply fabric reinforced 100% silicone material as other popular M7 silicone hose products, this OE replacement elbow offers enhanced durability and performance.

Key Features:

• Direct factory OE replacement with no modifications required
• Smooth and larger bend compared to the convoluted molded rubber OE part
• Resistant to age, oil reaction, high boost applications, and environmental damage
• Designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure
• Includes one silicone elbow and two high-quality lined stainless steel clamps
• Easy installation with basic hand tools
• Currently available only in BLACK

Upgrade your MINI's performance with the M7 Speed Cold Side Lower Intercooler Elbow, designed to replace the OE rubber elbow prone to failure over time. With its durable silicone construction and easy installation, this elbow is perfect for high-performance MINIs running increased boost.

M7 Pre-Intercooler Charge Pipe for MINI

Upgrade your MINI's performance with the M7 Pre-Intercooler Charge Pipe, a silicone hose designed to replace the stock piping between the turbocharger's outlet and the intercooler's inlet. Unlike OEM parts that feature restrictive piping and baffles, this charge pipe ensures uninterrupted airflow for enhanced turbocharger sound and performance.

Benefits:

• Smooth inner walls and mandrel bends allow uninterrupted airflow
• Enhances turbocharger sound for a more exhilarating driving experience
• Dyno-tested gains of 3.6 horsepower and 11.3 ft-lb of torque at the wheels
• Available in BLACK, RED, and BLUE to complement your MINI's engine bay
• Proudly made in the USA for quality assurance

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI's performance with the M7 Speed 100% silicone four-ply fiber reinforced intake hose, a direct OE replacement part designed to enhance durability, airflow, and service life. Not only does it improve performance, but it also adds a sleek under-hood WOW factor that MINIs desperately need.

M7 Speed proudly introduces its newly developed intake hose for all MINIs equipped with the N14 turbocharged engine, available in four standard M7 colors (BLACK, RED, BLUE, and GREEN). Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, ensuring hassle-free installation without any modifications. This eliminates the risk of triggering a Check Engine Light (DTC code) by disrupting the PCV electrical connection. The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part only fits MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for high temperature (300°F [149°C]) continuous service.
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
• Easy DIY installation.

BMW F56 B46 B48 JCW Charge And Boost Pipes are designed to elevate your Mini Cooper's performance to new heights. Tailored specifically for the F55, F56, F57, and F54 models, these pipes are crafted to enhance airflow and durability, delivering optimal turbocharged efficiency. Turner Motorsport's Charge and Boost Pipes minimize restrictions, resulting in improved throttle response and increased power output. Upgrade your Mini with these precision-engineered pipes to enjoy superior turbo performance and a sleek, high-quality appearance.

• Enhanced Airflow: Boosts airflow for optimal turbocharged efficiency.
• Increased Power Output: Reduces restrictions for better throttle response and power.
• Durable Construction: Engineered for lasting performance and reliability.
• Sleek Design: Adds a high-quality, attractive look to your Mini Cooper.

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI with the M7 Speed 100% silicone four-ply fiber-reinforced intake hose, designed as a direct OE replacement part for all MINIs equipped with the N14 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds a striking under-hood WOW factor that MINIs desperately need.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for hassle-free installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a Check Engine Light (DTC code). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for high temperature (300°F [149°C]) continuous service.
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
• Easy DIY installation.

MINI N14 N18 1.6L High Flow Pre-Intercooler Charge Pipe - Red is designed to replace the stock piping between the turbocharger's outlet and the intercooler's inlet. This silicone hose eliminates restrictive factory piping and baffles, allowing for uninterrupted airflow and improved performance.

• Enhances airflow from turbocharger to intercooler
• Smooth inner walls and mandrel bends for optimal air path
• Increases horsepower and torque
• Reveals the pure sound of the turbo
• Made from durable silicone material
• Available in multiple colors: Black, Red, Blue, Green
• Proudly made in the USA

Enhance your Mini's performance and durability with Forge Motorsport's Silicone Hoses. When rubber hoses deteriorate, they compromise engine integrity and performance. Forge's Silicone Hoses feature an optimized internal bore design, eliminating restrictions and ensuring peak engine performance.

• Silicone construction prevents deterioration and cracking
• Maximized internal bore removes restrictions for optimal performance
• Enhances engine durability and longevity
• Compatible with various Mini models