ECS Tuning presents magnetic drain plugs tailored for your BMW, equipped with a permanently mounted magnet to trap ferrous metal suspended in your oil. These plugs capture tiny particles, typically evading the oil filter, resulting in a cleaner engine. Over time, this saves your bearings and oil pump from unnecessary wear. Crafted from robust 7075-T6 aluminum, the ECS Tuning M12 magnetic drain plug boasts 80% more strength than the common 6061 aluminum.

• Permanently mounted magnet for metal particle trapping
• Cleaner engine and extended bearing life
• 7075-T6 aluminum construction for superior strength
• Captures metal particles from wearing or rebuilt engines
• Ideal for normal wear of reciprocating parts
• Torque to 18ft-lbs using a 17mm socket, like your stock drain plug

MSD Performance Coil Pack for MINI

Before ordering, check whether you need round or flat pin connectors for your MINI's coil pack. The type of pin is determined by the connectors that link the coil to the wiring harness. To check, slide the red locking tab to the right, press down on the tab, and pull the connector off the coil. Examine the pins to see if they are flat or round. Reattach the connector by pushing it back on until it clicks, then slide the red locking tab back to the locked position.

This high-performance coil pack is a popular upgrade among MINI owners looking to enhance their vehicle's performance over the stock coil. The installation requires removing the factory bolts from the old coil and modifying the MSD factory sleeves by drilling out 1/16" to fit the stock bolts.

Kits Include:

• MSD Coil Pack
• MSD Wire Set - Red
• Inductance: 7mH
• Maximum Voltage: 36,000 Volts
• Primary Resistance: 0.51 OHMs
• Secondary Resistance: 12K OHMs
• Turns Ratio: 77:1

Key Benefits:

• Upgraded performance over stock coil pack
• Enhances ignition efficiency and engine performance
• High voltage output of 36,000 volts for stronger sparks
• Low primary resistance of 0.51 OHMs for efficient energy transfer
• High secondary resistance of 12K OHMs for improved performance
• Durable construction for long-lasting use

Keep your engine running smoothly by eliminating abrasive metal particles from your oil with ECS Tuning's Magnetic Plugs. These expertly engineered plugs are designed in-house to ensure a perfect fit and feature a permanent magnet securely attached to the plug body. This magnet effectively attracts and retains even the tiniest abrasive and ferrous metal particles, preventing their circulation within your lubrication systems.

Metal particles can infiltrate lubricating and hydraulic systems due to various conditions, such as:

• Constant flaking from the normal wear of moving parts
• Residual particles left after boring or machining operations
• Chipping caused by sub-surface casting flaws
• Minute component breakdown due to stress usage

A combination of these factors can lead to the presence of metal particles, which, if left unaddressed, can cause excessive wear on crucial components. ECS Tuning's Magnetic Plugs effectively combat this issue, safeguarding your engine's internal components against excessive wear.

Don't let concerns about excessive wear trouble you. Instead, trust ECS Tuning's Magnetic Plugs to provide the protection your engine deserves. This drain plug comes complete with 1 aluminum crush washer, which is essential for every oil service. For future oil changes, consult ES1899296 for the required replacement.

Protect your drivetrain from premature wear by effectively eliminating abrasive metal particles from your fluid. ECS Tuning introduces Magnetic Plugs, expertly crafted for a perfect fit and featuring permanent magnets securely attached to the plug body. These magnets attract and retain tiny abrasive and ferrous metal particles, preventing their harmful circulation within your lubrication system.

Metal particles can infiltrate lubrication or hydraulic systems due to various factors, including normal wear and tear on moving parts, inadequate removal during flushing procedures, chipping from casting flaws, and component breakdown from stress usage. The combination of these factors can lead to metal particle presence, potentially causing excessive wear on critical components. ECS Tuning's Magnetic Plugs act as a crucial defense, preventing undue wear on your drivetrain's internal parts.

Ensure peace of mind and reduce wear with ECS Tuning's Magnetic Plugs.