BMW Maintenance & Tune-Up Parts for MINI

Engineered with an exclusive full-synthetic ester formula, these top-tier products are meticulously crafted to cater to various vehicles, including passenger cars, light trucks, performance vehicles, and marine applications. Offering an unparalleled level of quality, they boast an extensive range of viscosity options, ensuring the highest standards in the current market.

• Full-synthetic ester formula suitable for diverse vehicle types
• Exceptional protection, efficiency, and extended drain intervals
• Outstanding wear protection and friction reduction in varied conditions
• High detergency for increased cleanliness and prolonged drain intervals
• Enhanced fuel economy, improved ring seal, and elevated power output
• Unmatched high temperature stability and oxidation resistance for superior lubrication
• Natural high viscosity index providing a thicker oil film in crucial engine components
• Reduced evaporation, ensuring improved efficiency and ring seal
• Blended with polyol ester base stocks for multi-grade properties and enhanced lubricity
• Compatible with both conventional and synthetic motor oils
• Recommended for API SN/SM/SL/SJ/SH/SG/CF and ACEA A3/B3/B4 specifications

MSD Performance Coil Pack for MINI

Before ordering, check whether you need round or flat pin connectors for your MINI's coil pack. The type of pin is determined by the connectors that link the coil to the wiring harness. To check, slide the red locking tab to the right, press down on the tab, and pull the connector off the coil. Examine the pins to see if they are flat or round. Reattach the connector by pushing it back on until it clicks, then slide the red locking tab back to the locked position.

This high-performance coil pack is a popular upgrade among MINI owners looking to enhance their vehicle's performance over the stock coil. The installation requires removing the factory bolts from the old coil and modifying the MSD factory sleeves by drilling out 1/16" to fit the stock bolts.

Kits Include:

• MSD Coil Pack
• MSD Wire Set - Red
• Inductance: 7mH
• Maximum Voltage: 36,000 Volts
• Primary Resistance: 0.51 OHMs
• Secondary Resistance: 12K OHMs
• Turns Ratio: 77:1

Key Benefits:

• Upgraded performance over stock coil pack
• Enhances ignition efficiency and engine performance
• High voltage output of 36,000 volts for stronger sparks
• Low primary resistance of 0.51 OHMs for efficient energy transfer
• High secondary resistance of 12K OHMs for improved performance
• Durable construction for long-lasting use

Keep your engine running smoothly by eliminating abrasive metal particles from your oil with ECS Tuning's Magnetic Plugs. These expertly engineered plugs are designed in-house to ensure a perfect fit and feature a permanent magnet securely attached to the plug body. This magnet effectively attracts and retains even the tiniest abrasive and ferrous metal particles, preventing their circulation within your lubrication systems.

Metal particles can infiltrate lubricating and hydraulic systems due to various conditions, such as:

• Constant flaking from the normal wear of moving parts
• Residual particles left after boring or machining operations
• Chipping caused by sub-surface casting flaws
• Minute component breakdown due to stress usage

A combination of these factors can lead to the presence of metal particles, which, if left unaddressed, can cause excessive wear on crucial components. ECS Tuning's Magnetic Plugs effectively combat this issue, safeguarding your engine's internal components against excessive wear.

Don't let concerns about excessive wear trouble you. Instead, trust ECS Tuning's Magnetic Plugs to provide the protection your engine deserves. This drain plug comes complete with 1 aluminum crush washer, which is essential for every oil service. For future oil changes, consult ES1899296 for the required replacement.

Protect your drivetrain from premature wear by effectively eliminating abrasive metal particles from your fluid. ECS Tuning introduces Magnetic Plugs, expertly crafted for a perfect fit and featuring permanent magnets securely attached to the plug body. These magnets attract and retain tiny abrasive and ferrous metal particles, preventing their harmful circulation within your lubrication system.

Metal particles can infiltrate lubrication or hydraulic systems due to various factors, including normal wear and tear on moving parts, inadequate removal during flushing procedures, chipping from casting flaws, and component breakdown from stress usage. The combination of these factors can lead to metal particle presence, potentially causing excessive wear on critical components. ECS Tuning's Magnetic Plugs act as a crucial defense, preventing undue wear on your drivetrain's internal parts.

Ensure peace of mind and reduce wear with ECS Tuning's Magnetic Plugs.

This is Red Line's latest synthetic transmission fluid that is compatible with BMW's MTF-LT3 transmission fluid. This is the transmission fluid used in both manual and automatic transmissions since the mid-2000's. To confirm, check the decal located on the side of your transmission. Price is per quart.

Synthetic D6 ATF is a lower viscosity version of the D4ATF and is designed for better fuel efficiency in CAFE testing. Dexron VI requires a different approach to a conventional ATF formulation. Rather than beginning with a 7.5 cSt fluid and allowing a viscosity loss in use to drop to 5.5 cSt, the Dexron VI fluid requires a starting viscosity of less than 6.4 and a final drop to no less than 5.5 cSt. Red Line D6 will drop to no less than 6.1 cSt. Since the final viscosity after use of these fluids are similar, Dexron VI fluids can be used where Dexron III fluids were previously recommended (with the exception of some manual transmission applications, our customers report).

D6 ATF also provides significantly improved gear protection and will provide a GL-4 level of gear protection. The balanced frictional characteristics provide smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.

Suitable replacement for the following BMW part numbers: BMW ATF 3 BMW ATF 3+ 83220142516 (M-1375.4) 83222152426 (M-L12108) 83220432807 83220397114 MTF-LT-3 83222289720 83222305397 ZF Lifeguard 6/6 PLUS 8 ZF6/8

CVT (Multitronic) Automatic Transmission Fluid - 1 Quart is essential for maintaining the performance and longevity of your Mini's transmission. Regular replacement of your transmission fluid can prevent premature wear and potential damage to your gearbox. Adhering to the manufacturer's recommended service interval is crucial to ensure optimal performance.

• Maintains transmission performance and longevity
• Prevents premature wear and gearbox damage
• Adheres to manufacturer's service intervals
• Easy to use 1-quart bottle
• Suitable for Mini's transmission with a capacity of 4.54 liters

This 0W-40 engine oil is ideal for BMW vehicles, offering swift flow throughout the engine for quick starts and enhanced wear protection. Its ester base lubricates engine components with precision, reducing wear and tear, while its detergents and dispersants effectively cleanse deposits, holding them until the next oil change. Specifically formulated for modern road cars and light trucks, it meets the specifications of most late-model BMW models and is also suitable for VW/Audi 500.00,502.00, 503.01, 505.00. Recommended for API SN/SM/SL/CF and ACEA A3/B3/B4 standards, this oil ensures top-notch performance and longevity for your BMW's engine.

• Swift flow for fast starts and wear protection
• Ester base reduces engine wear
• Cleanses deposits effectively
• Suitable for modern road cars and light trucks
• Meets specifications for late-model BMW models
• Compatible with VW/Audi 500.00,502.00, 503.01, 505.00
• Recommended for API SN/SM/SL/CF and ACEA A3/B3/B4 standards

Clickhere for SI-1 Tech Info