The ECS MINI Coilover Line was designed with the daily driver in mind! Focused on improving the performance and aesthetics of your vehicle without forgetting comfort. With 32 levels of available damping and height adjustments tailored to each car, ECS coilovers are right in that sweet spot of firm and compliant while giving you an aggressive look and vastly improved handling.

The ECS Tuning Performance Coilover System provides a sport-tuned, height, damping, and body adjustable suspension with substantial performance benefits using high-quality materials and coatings to replace your worn suspension, all while giving your vehicle that perfect ride height!

Spring Rates: Front is 6kg/mm, Rear is 6kg/mm

PERFORMANCE FEATURES:

32 levels of rebound damping adjustment
Adjustable front sway bar end links
Lowering Adjustment of: 1.5" - 4"
Heat treated, progressive rate coil springs.
Adjustable damping, monotube shocks/struts paired with optimized progressive rate coil springs gives your vehicle road-sticking grip with reduced body roll for exceptional confidence in your vehicle's handling. With your vehicle's new, lower ride height the center of gravity is now moved lower, further improving handling performance
Adjustable front bodies allow you to set the ride height while maintaining correct spring pre-load
Adjustable front and rear bodies allow the shock to operate in the correct valving range, regardless of ride height

PRODUCT DESIGN:

Strut and shock bodies finished with a durable gloss black powder coat for good looks and great longevity
Threaded portions are are zinc-coated for optimum corrosion protection against rain and salt (finish will vary between clear or black zinc coatings depending on availability)
Coil springs are powder-coated Reflex Silver Metallic finish for durability
Red anodized, billet aluminum spring seats with locking collars allow for quick, on the car, adjustability with the included spanner wrenches
Anodized adjustable sway bar end links with heavy duty bushings
Self-locking, zinc-coated flanged nuts used for shock & strut shaft pins
Zinc coated strut mount securing nuts included
Rear shock adjuster housings are black E-coated for durability
Zinc-coated lower spring perches
Integrated bump stops and dust boots

The ECS MINI Coilover Line was designed with the daily driver in mind! Focused on improving the performance and aesthetics of your vehicle without forgetting comfort. With 32 levels of available damping and height adjustments tailored to each car, ECS coilovers are right in that sweet spot of firm and compliant while giving you an aggressive look and vastly improved handling.

The ECS Tuning Performance Coilover System provides a sport-tuned, height, damping, and body adjustable suspension with substantial performance benefits using high-quality materials and coatings to replace your worn suspension, all while giving your vehicle that perfect ride height!

Spring Rates: Front is 6kg/mm, Rear is 6kg/mm

PERFORMANCE FEATURES:

32 levels of rebound damping adjustment
Adjustable front sway bar end links
Integrated camber plates for +/-1.5 degrees of adjustment to dial in your fitment and alignment
Lowering Adjustment of: 1.0" - 4.0"
Heat treated, progressive rate coil springs.
Adjustable damping, monotube shocks/struts paired with optimized progressive rate coil springs gives your vehicle road-sticking grip with reduced body roll for exceptional confidence in your vehicle's handling. With your vehicle's new, lower ride height the center of gravity is now moved lower, further improving handling performance
Adjustable front bodies allow you to set the ride height while maintaining correct spring pre-load
Adjustable front and rear bodies allow the shock to operate in the correct valving range, regardless of ride height

PRODUCT DESIGN:

Strut and shock bodies finished with a durable gloss black powder coat for good looks and great longevity
Threaded portions are are zinc-coated for optimum corrosion protection against rain and salt (finish will vary between clear or black zinc coatings depending on availability)
Coil springs are powder-coated Reflex Silver Metallic finish for durability
Red anodized, billet aluminum spring seats with locking collars allow for quick, on the car, adjustability with the included spanner wrenches
Anodized adjustable sway bar end links with heavy duty bushings
Self-locking, zinc-coated flanged nuts used for shock & strut shaft pins
Zinc coated strut mount securing nuts included
Rear shock adjuster housings are black E-coated for durability
Zinc-coated lower spring perches
Integrated bump stops and dust boots

Due to their soft rubber construction, OE strut mounts are known to wear at an accelerated rate. Many high-mileage vehicles fall victim to strut mount failure, which is commonly associated with annoying clunks, groans, or rattles from the front suspension.

With this issue in mind, ECS Tuning developed their heavy-duty front strut mount with upgraded, higher durometer rubber to resolve sloppy handling and increase longevity. Manufactured precisely within OEM tolerances, these mounts are a perfect fit for your MINI.

Features:

Reduces deflection: Increases vehicle handling and cornering dynamics by removing deflection within the strut mount. Increases longevity: Upgraded rubber construction makes for a stiffer mount, less prone to cracking and general degradation. Developed in-house: Designed and tested by ECS Tuning engineers, this mount is sure to outlast an OE replacement. Upgrade to a better strut mount without sacrificing ride comfort! Improve longevity and ride control all at once.

Termed as a guide mount or front strut support, this vital component might be the source of those troublesome suspension noises such as squeaks or clunks as it wears over time. Serving for both passenger and driver sides, this mount attaches to the top of the strut, revealing the end thread when the spring and strut are compressed and locked. Professional installation is recommended. Compatible with EDC/DDC (Electronic Dampening Control) systems. FEBI, renowned as an OEM supplier, guarantees quality and compatibility.

Benefits:

• Reduces suspension noise (squeaks, clunks)
• Compatible with both passenger and driver sides
• Works with EDC/DDC systems
• Provided by FEBI, an OEM supplier

M7 Strut Reinforcement Plates 53-510101 are the ultimate solution for MINI owners facing the common issue of strut tower mushrooming caused by heavy impacts from shocks and low aspect ratio tires. Over time, MINI's shock towers can develop a convex shape, disrupting suspension alignment and leading to a noticeable pull to one side. The M7 Strut Reinforcement Plates (SRPs) address this problem by reinforcing the sheet metal and shock top plate, creating a durable surface that resists bending, even during hard impacts.

Designed specifically for the R50 Base Model Cooper, the R52 Convertible, and the R53 Cooper S, these SRPs are an essential upgrade for any MINI enthusiast. Constructed from CNC machined billet aluminum and black anodized for durability, the 1/2" (13mm) thick plates cover the entire surface of the strut tower, distributing loads evenly and providing peace of mind.

Whether you drive your MINI daily or push it to the limits on the track, M7 Strut Reinforcement Plates offer a cost-effective preventative measure against expensive suspension repairs. Easy to install in less than 20 minutes, the SRPs use the stock nuts for mounting and come with instructions that also guide you through fixing existing mushrooming.

• Prevents strut tower mushrooming
• Constructed from CNC machined billet aluminum
• Black anodized for long-lasting durability
• Covers the entire strut tower surface
• Designed for R50, R52, and R53 MINI models
• Easy installation with stock nuts
• Made in the USA

If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.

Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.

This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.

The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.

We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.

Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.

Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.

The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).

If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!

Please note:

• You cannot buy the SRPs and attach the cross-bar at a later time.
• The brace does not directly fit on the R50 and R52 Non-"S" Cooper due to limited hood clearance of the non-supercharged cars. It will fit but may push up on the hood slightly, requiring molding or cutting of the hood insulation after installation.
• Trimming of the underhood insulation material may be required to fully clear this brace. This is a very tight space.

Enhance your BMW's handling with M7 MAXX-G Adjustable Swaybar Endlinks designed for lowered or raised MINIs. Crafted from forged SAE 4340 alloy steel, these endlinks offer superior strength and symmetry in cornering performance, allowing bind-free suspension travel and improved chassis balance. The adjustability feature ensures proper alignment, maximum grip, and neutralized sway bars for consistent balance in left and right-hand turns.

Benefits:

• Superior strength with forged alloy steel construction
• Symmetric cornering performance enhancement
• Bind-free suspension travel and better alignment
• Adjustable length for precise chassis tuning
• Corrosion-resistant black anodized finish
• Proudly made in the USA

M7 Speed Suspension Product for Generation 2 MINI Cooper Models (R55-R59)

M7 Speed proudly introduces a unique suspension product for the popular Generation 2 MINI Cooper models R55 through R59. These affordable vehicles are becoming the choice for many entry-level modifiers in the German performance car segment, and they are great for Rally Cross.

Engineered to transform the mild-mannered MINI into a more capable and versatile daily driver, this product is perfect for today’s lifestyle. Whether it's for spirited adventure motoring, weekend overlanding, living off the grid, or tackling pothole-riddled urban streets, the M7 Speed 2" Lift Kit makes it possible. By installing this lift kit, the MINI is elevated by 2 inches, plus an additional lift from larger diameter tires (up to an extra 1.5 inches). No additional modifications are required—simply bolt it in, perform a realignment, and enjoy! Add aftermarket wheels and larger tires to create a unique, durable, and practical vehicle that everyone will love.

The M7 Speed Stage 1 Kit includes everything needed for the transformation. This kit features precision-fabricated lift blocks and a set of MAXX-G heavy-duty adjustable front sway bar links. These shorter links are necessary to prevent suspension bind that can occur with stock-length sway bar links.

Stage 1 Kit Includes:

• 2" Lift Kit with high-strength assembly hardware (2 front riser blocks, 2 rear riser blocks)
• Set of MAXX-G Heavy Duty Adjustable Front Sway Bar Links
• Hardware kit with high-strength, proper-length bolts and new locking nuts

Features:

• Engineered using 3D CAD software and finite element simulation for proper fitment and safe, fail-proof performance
• CNC laser-cut parts
• Lightweight fabricated steel design
• Black urethane powder coating for corrosion protection and a quality appearance
• Designed for easy bolt-on installation, complete with all new high-strength hardware and installation instructions

MAXX-G Adjustable Sway Bar:

• Enhances cornering performance, provides bind-free suspension travel, improves suspension alignment, and overall chassis balance
• Features sealed and permanently lubricated forged steel ball stud & socket ends for easy installation
• Includes a military-grade aluminum adjuster sleeve with opposing RH & LH threads for simple length adjustments
• Replaceable link ends make maintenance easy

M7 Speed is the world leader in MINI adventure motoring, overlanding, and ultimate performance products. Renowned for exceptional customer service and product innovation, M7 Speed is dedicated to engineering and producing high-quality, easy-to-install aftermarket performance products. Located in Mooresville, North Carolina, also known as Race City USA, M7 Speed is at the epicenter of North American motorsports.

Upgrade your MINI Countryman or Paceman with the Stage 1 Bundle from M7 Speed, combining industry-leading suspension components for ultimate performance. This bundle includes M7's solid billet aluminum lift kit and MAXX-G adjustable sway bar links, designed specifically for the R60 Countryman and R61 Paceman models. Enjoy enhanced road clearance, improved cornering performance, and easy installation with this comprehensive bundle.

• Stage 1 Bundle includes lift kit and adjustable sway bar links
• Lift kit raises your MINI Countryman or Paceman by 2 inches for increased road clearance
• Precision-engineered components ensure proper fitment and safe performance
• Adjustable sway bar links improve cornering performance and suspension alignment
• Easy bolt-on installation with all necessary hardware included

Improve Your MINI's Grip with the M7 Rear Chassis Brace!

Enhance your MINI's handling by stiffening its chassis with the newly redesigned M7 Rear Chassis Brace. This upgrade is crucial for maximizing tire grip, allowing your suspension components—such as springs, shocks, and sway bars—to function optimally and keep your tires in better contact with the ground, resulting in improved grip.

• Enhanced Handling: Achieve better handling performance on both the street and the track by adding the M7 Rear Chassis Brace to your MINI's chassis.
• Triangulated Design: The fully triangulated design ensures maximum stiffness and stability, providing enhanced control during cornering and maneuvering.
• Lightweight Construction: Crafted from lightweight materials used in race car construction, the M7 Rear Chassis Brace adds rigidity without compromising your MINI's agility.
• Easy Installation: Designed for hassle-free installation, this brace can be easily mounted to your MINI's chassis with basic hand tools, allowing you to hit the road or track in no time.

Upgrade your MINI's chassis with the M7 Rear Chassis Brace and experience a significant improvement in grip and handling.

Enhance Your MINI's Suspension with M7 MAXX-G Adjustable Swaybar Endlinks

Enhance the performance of your MINI's suspension with the M7 MAXX-G Adjustable Swaybar Endlinks. Whether your MINI is lowered or raised, these endlinks offer improved cornering performance, suspension alignment, and overall chassis balance. Engineered with forged alloy steel housings and permanently lubricated ball stud & socket design, they provide durability and bind-free suspension travel. The hex-shaped aluminum body allows for easy adjustment with hand tools, ensuring safe and precise tuning. These endlinks are quieter and longer-lasting compared to typical spherical rod ends, offering superior performance and reliability.

Benefits:

• Forged alloy steel main body for strength and durability
• Permanently lubricated and sealed OEM style ball stud & socket design
• Adjustable length for precise chassis tuning
• Hex-shaped aluminum body for easy adjustment with hand tools
• Bright Black Anodized for corrosion protection

Ensure optimal suspension performance with Genuine MINI Stabilizer Links. Designed to transfer control for your suspension and adjust to road conditions, these links play a crucial role in maintaining stability and reducing play in the joints. When old links develop play or produce clunking noises, it's time for replacement. Each stabilizer link connects from the sway bar end to the front strut section, providing improved handling and reduced noise.

• Genuine MINI parts for reliable performance and durability
• Reduces play and clunking noises in the suspension system
• Ensures stability and control while driving
• Easy replacement process for enhanced driving experience