BMW Wheels - Genuine & Performance for MINI

Upgrade your BMW or MINI with Replacement Wheel Bolts, available in striking black. Whether you're aiming for a quick styling enhancement or need to replace lost stock bolts, these are an ideal choice. Designed with a standard conical seat, they seamlessly fit OEM applications, ensuring compatibility and a stylish appearance.

Benefits:

• Quick styling upgrade for your vehicle
• Sleek black finish for an enhanced look
• Compatible with BMW and MINI models
• Standard conical seat design for OEM fitment

The E-Z Chamfer deburring tool, constructed from High Speed Steel (HSS), is designed to eliminate burrs and ridges from threaded rods, bolts, pipes, and bar stock. Its size range of 0.7” – 1.5” (18-38mm) allows efficient removal of threads and burrs, creating a smooth chamfer for effortless nut and die insertion. Compatible with mild, hard, very hard, stainless, and super hard steels, it delivers optimal results when used with slow drill speeds and moderate pressure on most materials. To extend the tool's lifespan, it's advisable to operate at speeds below 800RPM and refrain from using impact drivers. Typically, only 1-3 threads need chamfering for a clean start.

Additionally, E-Z Chamfer sizes between 18-24mm require a speed of 600RPM, those ranging from 23-29mm perform optimally at 400RPM, and sizes from 30-38mm are best suited for a speed of 300RPM.

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point long reach deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

This complete set of extra deep sockets work great on cars equipped with extended studs. They also work as a long wheel nut socket for those deeply recessed nuts in wheels.

Features:

• 17mm, 19mm and 21mm socket in a sturdy blow molded case
• All sockets are 1/2" drive and a full 5-15/16 ( 150MM ) long
• Sockets are designed with inner bore to accept a 5" long stud

Handsome sockets are shop tough, plated to resist corrosion, and color-coded for fast identification. Set takes up less room in your tool box than conventional torque sticks, and comes in a handy blow-molded case for portability and easy organization.

Torque-limiting socket set prevents over-tightening of wheel bolts and lug nuts. Attach them to your ½-inch breaker bar or impact gun and tighten the wheel bolts or lugs until the socket stops tightening at 74 ft-lb (100 Nm). Then final-tighten the wheel fasteners to the recommended specification using a torque wrench.

Features:

• 17, 19, and 21 mm six-point impact sockets to fit most metric wheel bolt heads and lug nuts.
• Combine these with our Protecta Sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

Schwaben Protecta Sockets have color coded mar-free exterior sleeve  that prevent nicks and scratches left by plain metal sockets. Internal spring loaded magnet holds lug nut in place.

Features:

• 17mm, 19mm and 21mm Sockets included in a blow molded case.
• All sockets are 1/2" drive
• 3-3/8" ( 86mm) long

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Schwaben 17mm Protecta Socket is a high-quality tool designed for professional mechanics and DIY enthusiasts alike. This socket features a protective coating to safeguard against damage to fasteners and surfaces, making it ideal for use in delicate applications. Its precision fit ensures optimal performance and reliability.

• Protective Coating: Safeguards against damage to fasteners and surrounding surfaces.
• Precision Fit: Ensures optimal performance and prevents slipping or rounding off.
• Durable Construction: Built to withstand rigorous use in professional settings.
• Versatile Use: Ideal for both professional mechanics and DIY enthusiasts.

This tire stack by Schwaben is the solution to keeping your tires and wheels clean while in storage.

Features:

Durable 150D coated material rated for outdoor use. The cover is large, at 32" wide by 46" tall. Fitted with a long 29" zipper up the side for easy installation and removal. An adjustable nylon draw string allows for a good, snug fit. Includes a handy storage pouch if not in use. WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

This comprehensive set features nine drivers designed to fit a wide range of common wheel bearings. Simply flip the discs to use them for seal installation. Comes in a handy clamshell case for easy storage.

Includes:

• 1.565" Driver
• 1.750" Driver
• 1.965" Driver
• 2.325" Driver
• 2.470" Driver
• 2.555" Driver
• 2.830" Driver
• 2.995" Driver
• 3.180" Driver
• Driver Tool
• Blow Molded Case