BMW & MINI Rear Brake Rotors - Pair 11.02" (280x10)

Restore braking performance and safety with the BMW & MINI Rear Brake Rotors - Pair 11.02" (280x10), essential components for BMW and MINI vehicles.

• Enhanced Braking Performance: Provides smooth and consistent braking action.
• Quality Construction: Made from durable materials for reliability and longevity.
• Direct Replacement: Designed to fit BMW and MINI vehicles precisely.
• Compatible with Various Brake Pads: Ideal for both daily driving and performance applications.

Upgrade your BMW or MINI with confidence using the BMW & MINI Rear Brake Rotors - Pair 11.02" (280x10), ensuring safe and reliable braking performance.

If you're noticing pulsating brakes, grinding noises, or visible rotor wear, it's crucial to replace your worn brake rotors promptly. Alongside rotor replacement, inspecting calipers, pads, and brake lines is recommended for optimal braking efficiency.

MINI R56 Rear Brake Pads Set P06052 provides an excellent upgrade for enhancing braking performance in your Mini. These brake pads are engineered to meet or exceed the standards of original equipment, delivering superior safety, performance, and comfort.

• OE-Equivalent Performance: Matches or exceeds the performance of the original equipment, ensuring reliable braking power.
• Brembo Quality Assurance: Manufactured by Brembo, known for their high standards of quality and performance in braking systems.
• ECE-R90 Certification: Certified for safety and reliability, providing peace of mind with every stop.
• Enhanced Safety: Designed to deliver consistent braking performance and reduce stopping distances.
• Improved Comfort: Engineered to minimize noise and vibration for a smoother driving experience.

Upgrade your Mini's braking system with the MINI R56 Rear Brake Pads Set P06052, offering the trusted quality and performance you expect from Brembo.

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
2008-2013 E82/88 BMW 135i, 128 with BMW Performance caliper conversion
2006-2009 E9X BMW Submodels with BMW Performance caliper conversion

Upgrade your Mini's braking system with the Genuine Mini R56 Brake Master Cylinder. This OEM part ensures reliable performance and precise braking control for Mini R56 models. Engineered to Mini's exact specifications, it provides seamless integration and enhanced safety on the road. With durable construction and efficient hydraulic operation, this brake master cylinder maintains optimal braking efficiency, ensuring a smooth and responsive braking experience.

• Genuine OEM part for reliability
• Ensures precise braking control
• Seamless integration with Mini R56 models
• Durable construction for long-lasting performance
• Enhances safety and braking efficiency

Upgrade your Mini with the Genuine Mini Brake Master Cylinder for improved braking performance.

BRAKE CALIPER PISTON TOOL SET:

The Schwaben 18-piece disk brake retractor tool kit screws brake caliper pistons back into their bores to make room needed for new brake pads. An essential tool for working on calipers with threaded pistons, the kit comes with both right-hand and left-hand thread screw jacks, press plate, and 15 different diameter press disks to fit a wide variety of vehicles, both import and domestic, including Audi, BMW, Ford, GM, Honda, Mazda, Mitsubishi, Subaru, Toyota, Volkswagen and others.

Made of 100 percent chromalloy steel for strength, durability, and long service life.

PROTECTA SOCKET SET:

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

CALIPER HOOK SET:

• Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.
• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

When it comes to replacing components in your Brembo High Performance or Racing Brake system, prioritizing authenticity is crucial. Utilizing Genuine Brembo Replacement Parts is paramount for maintaining optimal performance, safety, and longevity of your braking system and its components.

• Genuine Brembo Replacement Parts ensure the highest quality and compatibility.
• Non-Brembo parts may compromise braking system performance and safety.

Collar Nut | Self-Locking is a vital component used in various suspension locations on BMW and MINI vehicles. This 8mm hex nut provides reliable performance and secure fastening for suspension systems.

• Self-Locking Feature: Ensures that the nut remains securely fastened under vibration and stress.
• Durable Construction: Designed to withstand the demands of automotive suspension systems.
• Versatile Use: Suitable for various locations in the suspension system of BMW and MINI vehicles.
• Precision Fit: 8mm hex size for accurate and easy installation.