This seal is found where the driveshaft connects to the differential.

Genuine BMW Shaft Seal - 50X78X10/15
 

This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E38,E39,E53 X5,E63,E65,E70 X5,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F30,F32,F33,F36
 

Stage 2 MINI Cooper S R52 R53 Clutch Kit

Upgrade your Mini's clutch system with the Stage 2 MINI Cooper S R52 R53 Clutch Kit. Engineered for performance, this clutch kit is designed to handle increased power and torque levels. Enjoy smoother engagements and improved durability, even under high-performance driving conditions.

• Specifically designed for MINI Cooper S R52 R53 models
• Handles increased power and torque levels
• Ensures smoother engagements
• Improved durability for high-performance driving
• Engineered for optimal performance

Are you noticing clutch slipping issues in your Mini, even though the slave cylinder and pedal seem fine? It might be time to replace the clutch to restore your Mini's functionality. Don't let a slipping clutch compromise your driving experience. Invest in a replacement clutch to bring your Mini back to its optimal working condition.

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Elevate your BMW MINI Cooper S/JCW 2.0L's performance with this lightweight clutch master flywheel, weighing just 25 lbs. Crafted to reduce rotational mass, this flywheel upgrade significantly enhances engine response and acceleration, providing an amplified driving experience.

• Lightweight design for reduced rotational mass
• Improves engine response and acceleration
• Enhances overall driving performance

Put an end to annoying clutch chatter with this brand-new dual mass flywheel. When you install this system, you'll experience a significant reduction in the effort required when shifting gears.

It's important to note that these dual mass flywheels cannot be resurfaced. If any wear is detected during a clutch replacement, they should be replaced. This flywheel comes in a 228mm diameter, offering a whole new shifting experience for your car.

Upgrade your clutch system and enjoy smoother gear changes with this dual mass flywheel.

Upgrade your Mini's clutch system with JMTC's MINI Cooper S Solid Flywheel Conversion Clutch Kit, a superior alternative to the OEM dual mass flywheel and clutch kit. Engineered for durability and performance, this clutch and solid single mass flywheel replacement ensures reliable power transmission and smoother engagements. Benefits include:

• Direct replacement for OEM dual mass flywheel and clutch kit.
• Interchangeable with OEM clutch sets and components.
• Steel surface can be refinished on the steel flywheel; friction area can be replaced on the aluminum flywheel.
• Enhanced durability and reliability compared to OEM dual mass flywheel.
• Absence of catastrophic failures common in dual mass flywheels.
• Four times thicker friction surface area for better heat absorption and distribution.
• Longer lifespan and reduced risk of glazing the clutch.
• Suitable for street, track, and strip driving.

Features:

• Clutches made with Clutchtex Kevlar and Miba Ceramics.
• Extended life Ceramic clutch pad.
• Includes clutch disc, clutch disc centering tool, pressure plate, release bearing, pressure plate bolts, and steel flywheel.
• Kevlar clutch pads require break-in period; Ceramic pads fully mated in 10-20 miles.

JMTC recommends ordering an installation kit and a new master clutch cylinder for optimal performance and longevity of the clutch system.

MINI R56 Stage 4 MINI Clutch Kit - FX400 03635-HDCL-SK is a high-performance upgrade designed to enhance the clutch system in the MINI R56. This Stage 4 clutch kit by Clutch Masters offers a significant increase in holding capacity, providing 70% more clamping force than the stock clutch. It features a heavy-duty reinforced pressure plate and a Hi-Leverage™ pressure ring design for improved performance and durability. The sprung disc and steel-backed ceramic lining deliver exceptional engagement and longevity, making it an ideal choice for high-performance street driving.

• 70% increased holding capacity over stock for superior performance
• Heavy-duty reinforced pressure plate for enhanced durability
• Hi-Leverage™ pressure ring design for improved clamping force
• Sprung disc and steel-backed ceramic lining for reliable engagement
• Ideal for high-performance street driving

Upgrade your Mini with the MINI R Chassis Stage 4 S Clutch Kit - FX400 03635-HDC6-SK, designed for enthusiasts seeking enhanced performance and durability. This high-performance clutch kit offers superior handling of increased torque and horsepower, making it ideal for both street and track use. Engineered with advanced friction materials, it provides exceptional durability and heat resistance under extreme conditions. The Stage 4 S Clutch Kit ensures precise engagement and improved pedal feel, delivering a responsive driving experience that meets the demands of aggressive driving styles.

• Designed for increased torque and horsepower
• Superior handling and durability
• Advanced friction materials for heat resistance
• Precise engagement and improved pedal feel
• Ideal for street and track enthusiasts

Enhance your Mini's performance with the Stage 4 S Clutch Kit for reliable and responsive driving.

Ensure a secure and precise fitting for your Mini by utilizing 4 hexagon screws with part number #07 11 9 906 109. These screws are vital for securing and ensuring the proper installation of the product, delivering an ideal fit.

Benefits:

• Secure installation
• Ensures proper fitting