Wheel Tools and Storage for MINI

This professional-grade deluxe fender roller allows you to gently and gradually flatten your inner fender lips in order to increase your fender to tire clearance.

This new deluxe fender roller has been designed to fit most applications.

This is the perfect tool for:

If you want to lower your vehicle
If you want wider-than-stock wheels
If you are going to use wheel spacers or decreased offset
Will work with bolt patterns of 4x100 and 5x100 up to 4x114.3 and 5x130 with 12mm or 14mm lug bolts.

By rolling the fender lip flat, you can lower your car further, and give your car a wider stance, without your tires rubbing on the inside of the fender.

Fully adjustable for use on vehicles of different ride heights, offsets, and wheel bolt patterns.

Use of a heat gun is recommended to soften the fender surface during the rolling process and prevent paint cracking.

Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

Features:

• Reversible ½-inch drive click-to-stop
• Torque range of 10 to 150 ft-lb
• Accurate to within +/-4%
• 18 inches in length with a convenient carry case

Our aluminum wheel hanger makes it easy to remove and install wheels. Just thread the hanger stud into a wheel bolt hole and hang the wheel safely while you rotate tires or remove them for service or vehicle repair. (It's also great for keeping wheel bolt holes aligned on cars with spacers.)

Features:

• Longer & Lighter
• Made of 6061-T6 aluminum
• Anodized for hardness and good looks
• Knurled, non-slip handle has a drilled hole so you can hang it on a pegboard hook in your garage

Better still, order two: one for your garage and another for the emergency tool kit in you trunk.

This complete set of extra deep sockets work great on cars equipped with extended studs. They also work as a long wheel nut socket for those deeply recessed nuts in wheels.

Features:

• 17mm, 19mm and 21mm socket in a sturdy blow molded case
• All sockets are 1/2" drive and a full 5-15/16 ( 150MM ) long
• Sockets are designed with inner bore to accept a 5" long stud

WHEEL STORAGE RACK:

Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

Fits up to 8½" wide wheels, depending on offset

TIRE STACK COVER:

This tire stack by Schwaben is the solution to keeping your tires and wheels clean while in storage.

• Works with 4 tire stacks and works great with our Schwaben Wheel Tree (ES2710754).
• Durable 150D coated material is rated for outdoor use.
• Cover is a large 32" wide X 46" tall.
• Fitted with a long 29" zipper up the side for easy installation and removal.
• Nylon draw string at the bottom allows for a good snug fit.
• Includes a handy storage pouch if not in use.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

Fits up to 8½" wide wheels, depending on offset

Introducing the TPMS Starter Kit! Dive into TPMS servicing with ease using the included TPMS service tool and four sensors. Plus, enjoy peace of mind with our LIFETIME REPLACEMENT program, ensuring this kit remains by your side for the long haul!

T1000 TPMS SERVICE TOOL:

The FOXWELL T1000 TPMS Service Tool is designed to to activate OEM/Universal TPMS sensors, retrieve TPMS sensor data (sensor ID, tire pressure, temperature, battery condition and OE part number), relearn 98% sensor IDs, program FOXWELL T10-sensor to replace bad sensors and test Remote Keyless Entry Key Fobs.

Features:

• Activate 98% OEM/Universal TPMS sensors
• Programs FOXWELL T10 Sensors: Copy by Activation; Manual Create; Auto Create
• 3 TPMS Relearning Methods: Self learning; indirect learning; static learning.
• Fast Reading Sensor Data: Include sensor ID, tire pressure, temperature, battery, frequency, etc.
• Key Fob Testing Tool: Precisely test 315MHz and 433MHz key fobs to ensure whether it is perfectly running
• Solid and Rugged Construction: Well-constructed with materials designed to handle harsh work environments
• Intuitive and Easy Instructions: Easy to navigate and operate with clear instructions and detailed user manual
• Protective Blow Molding Box: Prevent your scanner from damage

With this TPMS programming tool, you can program FOXWELL T10 TPMS sensors to meet the specifications of a particular vehicle before new sensor installation and relearn. 3 different sensor programming methods are supported by the FOXWELL T1000 TPMS Service Tool: Copy by Activation; Manual Create; Automatic Create. (Note: T1000 will only program a replacement sensor if it is a FOXWELL T10 sensor.)

• Copy by Activation
  • If your original sensor works and can be activated. You could use this method to program a new sensor. It will clone the original ID to the new FOXWELL T10 sensor.
• Copy by Manual Input:
  • If you know the original sensor ID, you could input the ID to program new sensor.
• Auto Create 1-16 Sensors
  • If you don't know the original sensor ID or your original sensor was bad, you could choose this method. Install new sensor ID--program new sensor-->perform TPMS learning and let the car recognize new sensor 

The FOXWELL T1000 TPMS Service Tool can be used as a professional TPMS relearn scanner, to relearn almost all known sensor IDs, which is compatible with 99% of vehicles equipped with TPMS and extremely popular among car repair ships and DIY car owners. To ensure compatibility with different vehicles, 3 types for TPMS sensor relearning are offered: 1) self learning; 2) indirect learning; 3) static learning. These 3 learning methods will be easy to operate because the instructions of the scanner is fairly clear and intuitive.

• Self Learning:
  • T1000 provides the easy relearn procedure instruction to simplify the auto-relearn process if your vehicle is able to learn single or multiple TPMS sensor IDs. For some vehicles, the “Relearn” function can be completed automatically by driving, which makes it quite easy to do a complete set of sensor replacement operations on your own.
• Indirect Learning:
  • This method can only be operated in the car. When you don't have tire pressure sensors, the T1000 TPMS relearn tool will provides a learning method to operate in the car to reset the tire pressure light. The learning method will vary from each vehicle.
• Static Learning:
  • T1000 allows the new TPMS sensor IDs to be transferred without driving a vehicle. You can trigger the sensors when the vehicle is in learn mode by our TPMS Tool T1000.

Notice:

• FOXWELL T1000 doesn't support OBD relearn. It is not compatible with any OBD function.
• If you need to perform sensor cloning function, you should know your old sensor ID first. If not, you could use another scanner to scan the old sensor ID first, then use FOXWELL T1000 to perform sensor cloning.

METAL T10 TPMS SENSORS:

The Foxwell TPMS sensor integrates 315MHz and 433MHz dual frequency and can replace more than 96% of the OEM sensors on the market. Sensors can easily be activated and programmed by any TPMS tool on the market. 

Features:

• Metal valve stem.
• 315MHz and 433MHz dual frequency.
• High precision air valve to avoid air leakage.
• 0-30 degree adjustability. 
• Build in battery with an extended service life (more than 5 years)
• Temperature reading range -40F - 257F
• Pressure monitoring range 0 to 130.53psi
• Weight - 12G

Introducing the Lokithor JA301 – your go-to all-in-one handheld jump pack and air compressor for tackling roadside issues. Engineered with a patented unique design, this device prioritizes durability and versatile functionality. Its padded handgrip not only ensures a comfortable flashlight-like hold but also makes it suitable for hanging in your garage, campsite, or any location where extra illumination is crucial. The clear and bright interface provides instant insights into the battery charge level and tire pressure as you inflate.

Compact in size, the JA301 is easily storable in your vehicle, ready to rescue you when faced with a flat tire in need of air. With the ability to fill at least one tire and still retain ample battery power for a jump start, it ensures you won't be stranded. Even when stored in your car during extreme temperatures, this reliable tool guarantees consistent performance (see storage temps below). The Lokithor JA301 emerges as the ultimate roadside assistance solution, preventing you from being caught off guard with a dead battery or flat tire. Let this versatile tool tackle significant problems effortlessly.

Features:

• Charging: Charges your phone or other devices with its long battery life.
• Air Inflator: Will inflate your tires without the need to carry around a huge compressor or relying on a tiny digital inflator.
• Jump Starter: Powers up your battery in a pinch.
• Flashlight: Lights up whatever situation you're in: from family gathering to roadside emergency.

Includes:

• Main JA301 Unit
• Jumper Cables
• Air Hose
• Charging Cable
• Accessory Bag
• User Manual

Specifications:

• Battery Capacity: 74Wh
• Starting Voltage: 12V
• Starting Current: 1000A
• Peak Current: 2000A
• Pressure Range: 10-150 psi
• Sensor Accuracy: +/- 2 psi
• Storage Temp: -4°F to 122°F
• Gas Engine Rating: up to 8L
• Diesel Engine Rating: up to 6L

Correct toe settings contribute to both stable steering and even tire wear. The SPC Performance wheel toe bar tool is designed to prevent vehicle drifting and ensure uniform tire wear. It includes a steel bar equipped with sliding adjusters and pointers to accurately assess the vehicle's toe alignment.

For wider wheel bases use T#386442!

Introducing the TPMS Starter Kit! Dive into TPMS servicing with ease using the included TPMS service tool and four sensors. Plus, enjoy peace of mind with our LIFETIME REPLACEMENT program, ensuring this kit remains by your side for the long haul!

T1000 TPMS SERVICE TOOL:

The FOXWELL T1000 TPMS Service Tool is designed to to activate OEM/Universal TPMS sensors, retrieve TPMS sensor data (sensor ID, tire pressure, temperature, battery condition and OE part number), relearn 98% sensor IDs, program FOXWELL T10-sensor to replace bad sensors and test Remote Keyless Entry Key Fobs.

Features:

• Activate 98% OEM/Universal TPMS sensors
• Programs FOXWELL T10 Sensors: Copy by Activation; Manual Create; Auto Create
• 3 TPMS Relearning Methods: Self learning; indirect learning; static learning.
• Fast Reading Sensor Data: Include sensor ID, tire pressure, temperature, battery, frequency, etc.
• Key Fob Testing Tool: Precisely test 315MHz and 433MHz key fobs to ensure whether it is perfectly running
• Solid and Rugged Construction: Well-constructed with materials designed to handle harsh work environments
• Intuitive and Easy Instructions: Easy to navigate and operate with clear instructions and detailed user manual
• Protective Blow Molding Box: Prevent your scanner from damage

With this TPMS programming tool, you can program FOXWELL T10 TPMS sensors to meet the specifications of a particular vehicle before new sensor installation and relearn. 3 different sensor programming methods are supported by the FOXWELL T1000 TPMS Service Tool: Copy by Activation; Manual Create; Automatic Create. (Note: T1000 will only program a replacement sensor if it is a FOXWELL T10 sensor.)

• Copy by Activation
  • If your original sensor works and can be activated. You could use this method to program a new sensor. It will clone the original ID to the new FOXWELL T10 sensor.
• Copy by Manual Input:
  • If you know the original sensor ID, you could input the ID to program new sensor.
• Auto Create 1-16 Sensors
  • If you don't know the original sensor ID or your original sensor was bad, you could choose this method. Install new sensor ID--program new sensor-->perform TPMS learning and let the car recognize new sensor 

The FOXWELL T1000 TPMS Service Tool can be used as a professional TPMS relearn scanner, to relearn almost all known sensor IDs, which is compatible with 99% of vehicles equipped with TPMS and extremely popular among car repair ships and DIY car owners. To ensure compatibility with different vehicles, 3 types for TPMS sensor relearning are offered: 1) self learning; 2) indirect learning; 3) static learning. These 3 learning methods will be easy to operate because the instructions of the scanner is fairly clear and intuitive.

• Self Learning:
  • T1000 provides the easy relearn procedure instruction to simplify the auto-relearn process if your vehicle is able to learn single or multiple TPMS sensor IDs. For some vehicles, the “Relearn” function can be completed automatically by driving, which makes it quite easy to do a complete set of sensor replacement operations on your own.
• Indirect Learning:
  • This method can only be operated in the car. When you don't have tire pressure sensors, the T1000 TPMS relearn tool will provides a learning method to operate in the car to reset the tire pressure light. The learning method will vary from each vehicle.
• Static Learning:
  • T1000 allows the new TPMS sensor IDs to be transferred without driving a vehicle. You can trigger the sensors when the vehicle is in learn mode by our TPMS Tool T1000.

Notice:

• FOXWELL T1000 doesn't support OBD relearn. It is not compatible with any OBD function.
• If you need to perform sensor cloning function, you should know your old sensor ID first. If not, you could use another scanner to scan the old sensor ID first, then use FOXWELL T1000 to perform sensor cloning.

RUBBER T10 TPMS SENSORS:

The Foxwell TPMS sensor integrates 315MHz and 433MHz dual frequency and can replace more than 96% of the OEM sensors on the market. Sensors can easily be activated and programmed by any TPMS tool on the market. 

Features:

• Rubber valve stem.
• 315MHz and 433MHz dual frequency.
• High precision air valve to avoid air leakage.
• 0-30 degree adjustability. 
• Build in battery with an extended service life (more than 5 years)
• Temperature reading range -40F - 257F
• Pressure monitoring range 0 to 130.53psi
• Weight - 12G

The E-Z Chamfer deburring tool, constructed from High Speed Steel (HSS), is designed to eliminate burrs and ridges from threaded rods, bolts, pipes, and bar stock. Its size range of 0.7” – 1.5” (18-38mm) allows efficient removal of threads and burrs, creating a smooth chamfer for effortless nut and die insertion. Compatible with mild, hard, very hard, stainless, and super hard steels, it delivers optimal results when used with slow drill speeds and moderate pressure on most materials. To extend the tool's lifespan, it's advisable to operate at speeds below 800RPM and refrain from using impact drivers. Typically, only 1-3 threads need chamfering for a clean start.

Additionally, E-Z Chamfer sizes between 18-24mm require a speed of 600RPM, those ranging from 23-29mm perform optimally at 400RPM, and sizes from 30-38mm are best suited for a speed of 300RPM.