Stock-Size Piston Ring Set for Engine Head Repair

When it comes to engine head repair or rebuilding, this piston ring set is the perfect choice. Designed to be of stock size, it ensures a precise fit and reliable performance.

Key Details:

• One set of piston rings is needed for each piston.
• If your engine head contains four pistons, you'll require four sets to complete the repair.

MINI N18 1.6L Piston - (0 Size) Priced Each 081 PI 00110 000

A crucial component for Mini vehicles, ensuring optimal engine performance and reliability. Engineered with precision and durability, this piston is designed to withstand the demands of the N18 1.6L engine.

• Genuine Mini quality guarantees reliability and longevity
• Precision engineering ensures perfect fit and compatibility
• Enhances engine performance for a smooth and efficient operation
• Priced affordably for cost-effective maintenance

Upgrade your MINI with the M7 Oil Catch Can Kit__xxSTARTxx__/h1

The newly updated R55 through R57 Oil Catch Can kit for MINIs equipped with the N14 engine comes with a "designed-to-fit" stainless steel bracket, mounting hardware and pre-assembled hoses. Installation is super easy...no drilling and no special tools are needed. NOTE: This kit has been redesigned to fit on the firewall directly behind the outlet of the airbox. It uses the factory tab located on the firewall."Forum experts and social hysteria" say an OCC is not needed but we beg to differ. Why do so many MINI owners suffer from carbon buildup on their intake valve? The answer is oil being recycled through the intake tract to be burned. With the M7 Oil Catch Can, your MINI Cooper's engine will be protected from excessive oil and hydrocarbon buildup which leads to performance-hindering oil film and sludge along your intake tract, on your engine control sensors and on your engine's intake valves. Because the 2007 & up MINI is direct injection the intake valves do not benefit from the cleaning action provided by the gasoline as in older port injection engines. Now all the oil blow-by burns onto the intake valves and builds up into a flow choking hydrocarbon mess. The end result is loss of power and a very expensive repair bill. This oil film & sludge can appear in other critical places throughout the engine-- such as the intercooler-- where clean surfaces are critical for maximized heat transfer and on your MAF sensor (Mass Air Flow) where the film will cause the sensor to send a false signal to your ECU killing performance.

By capturing excess oil vapor and particles, the M7 Oil Catch Can ensures that oil film and sludge will not become a factor in your vehicle's performance. If you don't think your engine is pumping oil back through your intake system, remove the breather tube and look at all the oil!. The breather tube connects directly to you intake hose and directs this oily mess back through your engine to be burned.

Now with our exclusive "Exact-Fit" pre-assembled hose kit and brackets installation is super-easy.

Features:

• Pre-assembled hose assemblies.
• Stainless steel bracket and mounting hardware
• Eliminate intake tract oil contamination and intake valve damage.
• Prevent pre-mature sensor failure
• Keep engine performance at peak levels
• Billet Aluminum Construction
• Bright Black Anodized Finish
• Laser Etched M7 Logo

The M7 Oil Catch Can is not only functional is a work of automotive performance ART! It is CNC machined from billet aluminum and adds a sharp look to your engine compartment.

All hoses, brackets, clamps, necessary fittings and easy to follow detailed step-by-step instructions are available on this page in .PDF format. The design includes an oil drain plug and an easy to view sight tube which indicated the oil level within the can. The hoses are high quality "Made in the USA" automotive grade designed to withstand the rigors of the under-hood environment and to not degrade when exposed to oil. Beware of other "low cost" catch can systems that use silicone hoses because oil and silicone are not compatible. Silicone hoses will will eventually deteriorate and make an absolute mess of your engine compartment.

Bosch Part 9747 Spark Plugs (ZR 5 SI 332)

Resolve poor idle and engine misfire issues with Bosch Part 9747 Spark Plugs, also identified as ZR 5 SI 332. These spark plugs effectively tackle problems arising from worn electrodes and excessive carbon buildup, ensuring improved fuel efficiency and smoother engine operation.

Benefits:

• Addresses poor idle and engine misfire issues
• Combats excessive carbon buildup
• Enhances fuel efficiency
• Ensures reliable ignition for smoother engine operation

Regularly replacing worn spark plugs is crucial for optimal engine function, making Bosch Part 9747 an essential component of routine maintenance.

Genuine MINI N18 Valve Cover Gasket Set is a top-quality replacement part specifically designed for MINI vehicles with the N18 engine. This set ensures a perfect fit and optimal performance, maintaining the integrity of your engine and preventing oil leaks.

• Ensures a reliable seal to prevent oil leaks
• Designed for a precise fit for MINI N18 engines
• Made from high-quality materials for durability
• Helps maintain engine performance and efficiency
• Easy to install with comprehensive instructions

Upgrade your MINI with the Genuine MINI N18 Valve Cover Gasket Set and experience improved engine reliability and performance.

K&P Engineering High Performance Stainless Steel Micronic Oil Filter w/ Machine Finished End Caps is an advanced solution for superior oil filtration in automotive applications. This filter is designed to offer exceptional protection against oil contamination, ensuring optimal engine performance and longevity.

• High-Quality Stainless Steel Construction: Made from medical-grade type 304 stainless steel micronic filter cloth, which filters down to 35 microns and provides a high flow rate of 1.9 gallons per minute per square inch.
• Cleanable and Reusable: Unlike paper filters, this stainless steel filter can be washed and reused, offering both cost savings and environmental benefits.
• Consistent Filtration: Delivers reliable filtering performance across the entire filter surface, maintaining engine protection.
• Superior Filtration Performance: Achieves excellent ASTMF316 filtration standards and includes magnetic prefiltering to capture metallic particles.
• Billet Aluminum Filter Case: Acts as an oil cooler (where applicable) and adds durability.
• Progressive Rate Bypass: Combined with high flow characteristics, this feature prevents unfiltered oil from bypassing the filter during cold starts and high RPMs.
• Easy Contamination Inspection: Allows for straightforward inspection of engine contamination levels.
• Proven Track Record: Trusted in motorsports, military, and aerospace applications.

Please note: For older caged-type filters, a newer filter housing is required. Ensure the larger hole insert is installed on the housing cap for proper fitment.