MINI B38/B36 JMTC Refurbished Turbocharger offers a complete overhaul to restore turbocharger performance to a like-new condition. JMTC's refurbishment process includes a thorough cleaning and replacement of all internal components that may have been worn or damaged, such as turbine shaft bearings, thrust bearings, pressure seals, cartridges, and end housings. Components not meeting stringent standards are replaced, ensuring optimal performance.

• Thorough Overhaul: Includes cleaning and replacement of all internal components to ensure reliable functionality.
• High-Quality Parts: Only components meeting strict quality standards are used, with damaged parts replaced.
• Extended Warranty: Refurbished units retain JMTC's full warranty for added peace of mind.

Additional Recommendations:

• Pre-Installation Tips: For optimal results, JMTC recommends refurbishing the OEM catalytic converter or using a high-flow downpipe and installing a new oil line. This helps prevent recurrence of previous issues and ensures the turbo operates at its best.

JMTC Super S F56 Turbocharger for MINI

For MINI enthusiasts seeking a powerful upgrade, the JMTC Super S F56 turbocharger is engineered for both street and track performance. Designed with a 50mm compressor and a 9-blade high-flow turbine, this turbocharger offers rapid boost and significant power gains at higher RPMs. It maintains the quick response of the original turbo while delivering increased torque and horsepower.

Key Benefits:

• Billet Compressor: Ensures high durability and performance.
• High Flow 9-Blade Lightened Turbine: Provides quick spooling and efficient power delivery.
• High Strength Internals: Designed to withstand higher pressures.
• Upgraded 360-Degree Bearing: Enhances reliability and performance.
• High-Temperature Alloy Turbine Housing: Resists heat for consistent performance.
• Water-Cooled Bearing Housing: Improves cooling and longevity.
• Quick Spooling Dual Scrolling Housing: Reduces lag and enhances responsiveness.
• Power Increase: Up to 300 BHP for Cooper S and 320 BHP for JCW with supporting mods and ECU tuning.

Important Notes:

• The turbocharger does not include an electric actuator; use the one from your old turbo.
• For optimal results, consider refurbishing your OEM catalytic converter or using a high-flow downpipe. Installing a new oil line is also recommended to prevent future issues.
• Turbocharger rebuilds include a complete overhaul and replacement of any worn or damaged components, with a full warranty on rebuilt parts.

JM Turbo Cooper - Extreme GTD47 K04 Turbocharger Upgrade

JM Turbo Cooper offers the Extreme GTD47 K04 turbocharger upgrade designed to deliver outstanding reliability and high-performance gains for the 2007+ MINI Cooper. This upgrade is a top choice for Mini and Peugeot owners, providing exceptional power output for applications exceeding 280hp.

Update: The improved gasket design on the back side now features a seamless gasket inset, and the package includes a new gasket for your convenience.

The JMTC Extreme GTD47 upgrade boasts a high-pressure, high-flow, dual-scrolling turbo that features a substantial 50mm compressor wheel. This design ensures maximum boost at the top end of the RPM range, making it ideal for track, off-road, and extreme street applications. The large GTX exhaust turbine complements the setup, delivering extra boost at high RPMs and preventing torque loss compared to the stock K03 turbine.

Whether you seek extreme track performance, drag strip dominance, or unrivaled street upgrades, this turbocharger is the perfect choice. It offers impressive torque and durability, outperforming many other options on the market. To fully unleash its potential, we recommend pairing it with one of our aftermarket exhaust systems.

It's important to note that to harness the additional power, a custom tune is required. Running without a tune will result in minimal to no HP gain.

Estimated Power Gains:

• Approximately 60hp with a tune, intercooler, downpipe, cold air intake, new plugs, basic maintenance, and carbon blasting/cleaning.
• 120hp or more with all the above modifications, plus a ported head, larger valves, ICE pipe, intercooler, and a 3"+ or larger exhaust system.

Extreme GTD Upgrade Features:

• Brand new turbo!
• 47mm billet compressor
• High-flow GTX exhaust turbine
• High-strength K04 internals
• Upgraded 360-degree bearing
• Designed for higher pressure
• High-temperature alloy turbine housing
• Dual-scrolling turbine housing
• Water-cooled bearing housing

For engine and turbocharger reliability, JMTC recommends a 3.0" or larger downpipe/exhaust size for the GTD turbochargers. Please avoid using the stock downpipe or stock-sized catalytic converter.

The OEM intake boot can be used with the removal of the inner sleeve for N14 engines. For N18 engines, the OEM boot at the turbo connection will need to be heated and expanded slightly, which can be done with a heat gun. This turbocharger also fits AEM intake, NM Eng intake, and Forge Intake (Boot). Please note that the hose might need to be warmed and stretched over with a hose expander.

MINI R55 to R59 JMTC MCS Refurbished Turbocharger N18

The MINI R55 to R59 JMTC MCS Refurbished Turbocharger N18 offers exceptional performance with its high-flow twin-scroll turbine and extended tip compressor. This turbocharger enhances boost response, delivering significant torque and power gains across the entire power band. Designed for early spool-up and sustained high RPM performance, it achieves optimal results when paired with an aftermarket exhaust system.

• High-flow twin-scroll turbine for superior performance
• Extended tip compressor wheel for improved boost and response
• High-temperature alloy turbine housing for durability
• Water-cooled bearing housing for enhanced cooling
• Includes $100 core charge, refundable upon core return

Additional Information:

• MCS OEM/Interchange Part Numbers: 53039880163, 53039880118, 53039700163, 53039880181, 53039700181, 53039880118, 53039700118, 53039710163
• Product video available

Notes:

• New oil supply line recommended for optimal performance
• Optional refurbished catalytic converter available for extended 2-year warranty
• Refurbished parts may show signs of previous use, including scratches or imperfections
• CNC work done before porting; exact port matching within 100 microns cannot be guaranteed

The JMTCs S45 F56 turbocharger was designed with the street and track enthusiast in mind. We started with our huge 50mm compressor and upgraded quick spool high flow turbine to give you full boost quick and a huge amount of power at the top end. We also designed it to maintain the quick response of the original turbo but deliver much more torque and power.

This turbocharger not only delivers high torque in the low to mid-range but you will also see a power increase at higher RPM. No torque or power loss like you see with the original small 43mm turbo. If you are looking for a great street, track, or strip upgrade that delivers full race performance this is the turbo for you. Don’t be left at the starting line by any other car and get one our S45 turbos today.

S45 Specs

• 50/67mm Billet High flow compressor
• Quick Spooling 45/40mm High Flow exhaust turbine
• High strength internals with 360deg bearing
• Designed for higher pressure and high temperature turbine housing
• Water cooled bearing housing and quick spooling dual scrolling housing
• New electronic wastegate actuator (new turbo only, DV/BOV not included)

Requirements

• 3" full exhaust (to increase life of the turbo and the engine)
• ECU tuning (to increase preset power due to ECU load limits) - Please contact JM Turbo Cooper for local and regional tuners that require a custom tune for it to perform. JM Turbo Cooper
• One step colder spark plugs
• New oil supply line (to increase life of the turbo)

For engine and turbocharger reliability reasons JMTC requires a 3" or larger exhaust (from turbo to exhaust tip, no exceptions). As well as installing a new oil line and one step colder spark plugs. Tuning is not required but will be will help the turbo and engine reach their full potential. Price Includes the core charge of $250 that will be refunded when a rebuttable core is returned to JMTC. Refurbished turbos do not come with a wastegate actuator or one that has not been tested.

Super SF56 Upgraded Turbocharger - New by JM Turbo Cooper is the ultimate performance upgrade for BMW enthusiasts. Engineered for both street and track use, this turbocharger features a massive 50mm compressor and upgraded 9-blade lightened high-flow turbine. It delivers quick full boost and significant power gains throughout the RPM range, maintaining quick response and enhancing torque and power over the original turbo.

• Massive 50mm billet compressor for increased airflow
• Upgraded 9-blade lightened turbine for improved performance
• High-strength internals and upgraded 360-degree bearing
• Designed for higher pressure and temperature alloy turbine housing
• Water-cooled bearing housing for durability
• Quick spooling dual scrolling housing for optimal response

Upgrade your BMW with the Super SF56 Upgraded Turbocharger for unparalleled performance and power gains.

Upgrade your Mini's turbocharger system with the All New Boost Tee by Turbosmart, a redesigned and more compact version of the beloved Boost Tee. With a 33% smaller and ergonomic design, it retains the beloved features like the Gate Feature for optimal boost response, anti-tamper locking, and user-friendly operation. Here are the key benefits:

• Pneumatic bleed valve allowing increased boost on turbocharger systems
• Suitable for internal and external wastegate systems
• Achieves 100-200% boost increase over base spring pressure
• Proven detent system for defined boost control
• Locking mechanism for secure boost level setting
• Manufactured in Australia from High-Grade Brass and Billet Aluminum
• Simple, elegant, and robust solution for boost control and maximum response

This Boost Tee is a value-packed upgrade for your Turbocharged engine, ensuring reliable and precise boost control for enhanced performance.

Enhance Your Vehicle with Our Turbocharger Assembly

Discover the power of our turbocharger assembly, a complete package designed to boost your vehicle's performance. This assembly includes the waste gate actuator and the electric valve with a gasket, making it a comprehensive solution.

Key Features:

• Comprehensive turbocharger assembly for enhanced performance.
• Includes waste gate actuator and electric valve with gasket.
• Mounts at the front of the engine on the exhaust manifold.
• Seamless connection to the intake system.
• Manufactured by OEM for guaranteed quality and compatibility.

Discover the incredible JMTCs Super 42 high-pressure, high-flow dual-scrolling turbo upgrade by JM Turbo Cooper, designed for enthusiasts craving peak performance. With a substantial 42mm compressor, this turbocharger is engineered to deliver early and extended boost compared to the JWC turbo, resulting in outstanding response, torque, and power gains across the entire power band. The 42mm design also ensures an added kick at the top end when you need it most, making it the ultimate choice for those seeking an extreme street upgrade that delivers full race performance. It provides impressive torque, quick spooling, and extended durability. For race applications, consider pairing it with one of our aftermarket exhaust systems to unlock its full potential.

It's important to note that unlocking the extra power requires a custom tune. Running this turbo without a tune will result in minimal to no HP gain.

Estimated Performance Gains:

• Approximately 60hp with a custom tune, intercooler, downpipe, cold air intake, new plugs, basic maintenance, and carbon blasting/cleaning.
• 100hp+ (All of the above) in combination with a ported head, larger valves, ICE pipe, intercooler, and a 2.3/4"+ exhaust.

Please ensure you have a cleaned or new aftermarket catalytic converter and intercooler to avoid potential boost codes.

Key Features of the Upgraded Turbo:

• Brand new turbo with a 42mm compressor
• Lightened high-flow exhaust turbine
• High-strength K04 internals
• Upgraded 360-degree bearing
• Designed for higher pressure
• High-temperature alloy turbine housing
• Dual-scrolling turbine housing
• Water-cooled bearing housing
• Compatible with OEM Intake Boot (N14) and N18 Engines with some adjustments
• Fits AEM intake, NM Eng intake, and Forge Intake (Boot) Hose with minor adjustments.