K&N Aerosol Air Filter Cleaning Kit provides a simple and effective solution to preserve and maintain your K&N air filter, ensuring it delivers optimal performance for a lifetime. This cleaning kit is specifically designed to clean and restore the airflow efficiency of your reusable air filter, saving you money by eliminating the need to purchase replacement filters.

The K&N Aerosol Air Filter Cleaning Kit includes a powerful degreaser that effectively removes dirt, grime, and contaminants from your air filter. Once cleaned, the kit’s specialized oil is used to recoat the filter, ensuring it continues to trap harmful particles while allowing maximum airflow.

Regular maintenance with this kit not only extends the life of your air filter but also enhances your engine’s performance by maintaining high air flow and exceptional filtration. Easy to use, the K&N Aerosol Air Filter Cleaning Kit is an essential tool for keeping your air filter in top condition.

• Lifetime filter maintenance: Extends the lifespan of your K&N air filter, eliminating the need for replacements.
• Improved engine performance: Restores airflow efficiency for optimal engine operation.
• Cost-effective solution: Saves money by allowing you to maintain your existing air filter.
• Easy application: Simple-to-use aerosol spray for cleaning and re-oiling.

Genuine MINI Rubber Bushing - 11617593928

Explore the Genuine MINI Rubber Bushing - 11617593928, designed to optimize your Mini's performance. This essential rubber mount bushing, situated on the intake manifold and intake box, efficiently connects the intake system while minimizing vibrations.

Benefits:

• Enhances intake system connectivity
• Reduces vibrations for smoother operation
• Ensures durability and longevity

Upgrade your Mini's performance with the Genuine MINI Rubber Bushing - 11617593928.

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

Introducing the newly developed 100% silicone, four-ply fiber reinforced intake hose by M7 Speed, designed for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly improved airflow, and an almost unlimited service life. Besides its outstanding performance, it adds an impressive under-hood aesthetic that MINIs truly need.

The M7 intake hose stands out by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.

The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Maintains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.77” (45mm) ID at the turbo inlet.
• Easy DIY installation.

Enhance your Mini's performance with this brand new replacement air filter element designed for the M7 R53 Cold Air Intake System, R55-R61 MAXX-FLO Intake, and the R56 AGS-R Ram Air System. Pre-oiled for convenience, it comes with a new clamp, making installation a breeze. Improve airflow and maintain optimal engine efficiency with this high-quality air filter element.

• Direct replacement for M7 R53 Cold Air Intake System, R55-R61 MAXX-FLO Intake, and R56 AGS-R Ram Air System
• Pre-oiled for immediate use
• Includes new clamp for hassle-free installation
• Enhances airflow for improved engine performance
• Maintains optimal engine efficiency

M7 Speed Silicone Intake Hose for N14 Turbocharged MINIs

Elevate your MINI's performance and style with the M7 Speed 100% silicone four-ply fiber reinforced intake hose. This direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds the coveted under-hood WOW factor that MINIs need.

M7 Speed proudly introduces its newly developed intake hose designed for all MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose ensures a seamless integration into your MINI's engine bay while providing exceptional performance.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size. This means you can install it without any modifications, ensuring no disruption to the PCV electrical connection and eliminating the risk of initiating a DTC code (Check Engine Light). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions for hassle-free setup.

Crafted from 100% silicone materials resistant to oil and most chemical damage, this intake hose is designed for high-temperature continuous service up to 300°F (149°C). Its four-ply fiber reinforced construction ensures maximum strength and durability. With no modifications or cutting required for installation, this hose offers a 33% larger inside flow volume compared to the stock part, promoting better airflow to the turbocharger.

Key Features:

• Direct OE replacement part
• Superior durability
• Improved airflow
• Virtually unlimited service life
• Retains stock PCV connection location and size
• Easy DIY installation
• Available in four standard M7 colors
• Dimensions: 2.75” (70mm) ID at the MAF sensor, 1.97” (46mm) ID at the turbo inlet

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

M7 Speed proudly introduces its new 100% silicone four-ply fiber reinforced intake hose, designed specifically for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly better airflow, and an almost unlimited service life. It not only performs exceptionally well but also adds an impressive under-hood aesthetic that MINIs truly need.

The M7 intake hose stands out from other similar products by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This feature ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and straightforward installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.

The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Maintains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.97” (50mm) ID at the turbo inlet.
• Easy DIY installation.

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

Upgrade your MINI with the M7 Speed 100% silicone four-ply fiber-reinforced intake hose, designed for MINIs with the N18 turbocharged engine. This direct OE replacement part provides superior durability, improved airflow, and an almost limitless service life. Plus, its sleek design adds an impressive under-hood WOW factor.

Key Features:

• Retains OE PCV connection location and size for seamless installation without modifications.
• No disruption to the PCV electrical connection, preventing any risk of triggering a Check Engine Light (DTC code).
• Complete kit with three stainless steel clamps and easy-to-follow installation instructions.
• Includes correct resistor pack to avoid CEL issues.
• Made from 100% silicone, resistant to oil and most chemicals.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber-reinforced construction for maximum strength and durability.
• 33% larger inside flow volume compared to the stock part.
• Smooth inner surface and transitions for better airflow to the turbocharger.
• Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN).
• Sizes: 2.75” [70mm] ID at the MAF sensor, 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

Enhance Your MINI's Intake System!

This kit includes the intake boot, hot side boot, and cold side elbow kit to complete the intake system in silicone. It's also a perfect matching set for your engine bay.

This is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.

M7 Speed Silicone Intake Hose

M7 Speed proudly introduces its newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Offered in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose provides exceptional durability, improved airflow, and a long service life.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing the OE hose and connector to be installed without any modifications. This design eliminates any disruption to the PCV electrical connection, preventing the risk of triggering a DTC code (Check Engine Light). Each kit includes three stainless steel clamps and easy-to-follow installation instructions.

Note: This part is only compatible with MINIs equipped with the N18 R60 R61 turbocharged engine with one large PCV vent hose connected from the intake hose to the cam cover. The kit also includes a sensor kit for the heater sensor on later N18 models, ensuring no CEL.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions for better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor, 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is an essential upgrade for Mini enthusiasts looking to enhance the performance of their MINI N18 1.6L engine. This high-quality charge pipe, in sleek black finish, is designed to increase airflow and reduce turbo lag for improved throttle response and power delivery.

Crafted with precision engineering and durable materials, the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black ensures a perfect fit and reliable performance. It effectively increases the efficiency of the intercooler system, allowing for cooler and denser intake air for better engine performance.

• Enhances performance of MINI N18 1.6L engine
• Increases airflow and reduces turbo lag
• Improves throttle response and power delivery
• Sleek black finish adds aesthetic appeal
• Crafted with precision engineering and durable materials
• Ensures perfect fit and reliable performance

Investing in the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is a smart choice for Mini owners looking to unlock the full potential of their vehicle's engine.

Upgrade Your MINI's Intake System!

This kit includes the intake boot, hot side boot, and cold side elbow kit to complete the intake system in silicone. It's also a perfect matching set for your engine bay.

This is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.

M7 Speed Silicone Intake Hose

M7 Speed announces the release of its newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Offered in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.

Unique Benefits:

• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.

Specifications:

• Inner Diameter at MAF Sensor: 2.75” [70mm]
• Inner Diameter at Turbo Inlet: 1.97” [50mm]

Easy DIY installation.

Additional Features:

• Made from 100% silicone materials resistant to oil and most chemical damage.
• Designed for high temperature (300°F

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit to fully upgrade your intake system with matching silicone parts for your engine bay.

Introducing M7 Speed’s newly developed 100% silicone, four-ply fiber-reinforced intake hose for MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. It not only boosts performance but also adds a striking under-hood WOW factor that MINIs crave.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without modifications. This means no disruption to the PCV electrical connection, preventing any risk of triggering a Check Engine Light (DTC code). The kit includes three stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, which has one large PCV vent hose connected from the intake hose to the cam cover.

Features:

• Made from 100% silicone, resistant to oil and most chemicals
• Designed for continuous service at high temperatures (300°F [149°C])
• Four-ply fiber-reinforced construction for maximum strength and durability
• Retains stock PCV connection location and size for easy installation
• No modifications or cutting required for installation
• 33% larger inside flow volume compared to the stock part
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger
• Available in four standard M7 colors
• 2.75” [70mm] ID at the MAF sensor and 1.97” [50mm] ID at the turbo inlet
• Easy DIY installation

Upgrade your Mini's intake system with the M7 Speed Silicone Intake Hose Kit, including the intake boot, hot side boot, and cold side elbow kit. Crafted from 100% silicone materials resistant to oil and chemicals, this kit offers superior durability, improved airflow, and virtually unlimited service life. Benefits include:

• Direct OE replacement part for easy installation.
• Superior durability and airflow compared to stock parts.
• Retains stock PCV connection location and size.
• No modifications or cutting required for installation.
• 33% larger inside flow volume for enhanced performance.
• Available in four standard M7 colors for customization.
• Easy DIY installation with included stainless steel clamps and instructions.