M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

Introducing the newly developed 100% silicone, four-ply fiber reinforced intake hose by M7 Speed, designed for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly improved airflow, and an almost unlimited service life. Besides its outstanding performance, it adds an impressive under-hood aesthetic that MINIs truly need.

The M7 intake hose stands out by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.

The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Maintains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.77” (45mm) ID at the turbo inlet.
• Easy DIY installation.

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

Upgrade your MINI with the M7 Speed 100% silicone four-ply fiber-reinforced intake hose, designed for MINIs with the N18 turbocharged engine. This direct OE replacement part provides superior durability, improved airflow, and an almost limitless service life. Plus, its sleek design adds an impressive under-hood WOW factor.

Key Features:

• Retains OE PCV connection location and size for seamless installation without modifications.
• No disruption to the PCV electrical connection, preventing any risk of triggering a Check Engine Light (DTC code).
• Complete kit with three stainless steel clamps and easy-to-follow installation instructions.
• Includes correct resistor pack to avoid CEL issues.
• Made from 100% silicone, resistant to oil and most chemicals.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber-reinforced construction for maximum strength and durability.
• 33% larger inside flow volume compared to the stock part.
• Smooth inner surface and transitions for better airflow to the turbocharger.
• Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN).
• Sizes: 2.75” [70mm] ID at the MAF sensor, 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

M7 Speed proudly introduces its new 100% silicone four-ply fiber reinforced intake hose, designed specifically for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly better airflow, and an almost unlimited service life. It not only performs exceptionally well but also adds an impressive under-hood aesthetic that MINIs truly need.

The M7 intake hose stands out from other similar products by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This feature ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and straightforward installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.

The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Maintains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.97” (50mm) ID at the turbo inlet.
• Easy DIY installation.

M7 Speed Silicone Intake Hose for N14 Turbocharged MINIs

Elevate your MINI's performance and style with the M7 Speed 100% silicone four-ply fiber reinforced intake hose. This direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds the coveted under-hood WOW factor that MINIs need.

M7 Speed proudly introduces its newly developed intake hose designed for all MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose ensures a seamless integration into your MINI's engine bay while providing exceptional performance.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size. This means you can install it without any modifications, ensuring no disruption to the PCV electrical connection and eliminating the risk of initiating a DTC code (Check Engine Light). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions for hassle-free setup.

Crafted from 100% silicone materials resistant to oil and most chemical damage, this intake hose is designed for high-temperature continuous service up to 300°F (149°C). Its four-ply fiber reinforced construction ensures maximum strength and durability. With no modifications or cutting required for installation, this hose offers a 33% larger inside flow volume compared to the stock part, promoting better airflow to the turbocharger.

Key Features:

• Direct OE replacement part
• Superior durability
• Improved airflow
• Virtually unlimited service life
• Retains stock PCV connection location and size
• Easy DIY installation
• Available in four standard M7 colors
• Dimensions: 2.75” (70mm) ID at the MAF sensor, 1.97” (46mm) ID at the turbo inlet

Upgrade Your MINI with the Ultimate MAXX-FLO(TM) Fresh Air System!

Introducing the M7 Speed MAXX-FLO(TM) Fresh Air System, the ultimate upgrade for Generation 2 MINIs! Upgrade your MINI's performance with our latest offering, designed to fit all R55 through R59 MINIs with N14 & N18 Turbocharged engines, as well as the R60 Countryman and R61 Paceman. Our system replaces the restrictive stock air box with a precision-fabricated aluminum frame, seamlessly connecting to factory mounting points for easy installation. Say goodbye to the problems found in other aftermarket systems and hello to improved airflow, engine performance, and great sound.

• Sturdy Construction: Heavy gauge aluminum & TIG welded construction.
• Durable Finish: Matte black super durable powder coat finish with a laser cut stainless steel M7 medallion.
• High Flow Filter: 12" long x 5 " diameter dual stage super high flow/low restriction washable foam filter.
• Optional Filter: 8" long x 6" dia pleated washable filter available.
• Color Choices: 100% silicone connection elbow available in BLACK, BLUE, RED.
• MAF Sensor Location: MAF sensor stays in the stock location, no modifications necessary.
• Secure Mounting: Air filter element securely mounts to a sturdy metal adapter tube.
• Optional Accessories: Optional M7 R56 Vortex 2 Scoop and Turbo Heat Shield available (sold separately).
• Ease of Installation: Easy to install.
• Made in the USA: 100% Made in The USA.

Tech Notes:

• Optional MAF Spacer/Adapter required for vehicles without a MAF Sensor.
• Removal of factory blocking plate recommended when using a stock scoop.

Emissions Notes:

• This product has passed C.A.R.B. approval.
• Not legal for street use in California and other states that have adopted California Emissions Standards under Section 177 of the Federal Clean Air Act of 1970.
• Intake systems are subject to governmental regulation in certain states. For legal use, CARB Executive Order (EO) number is required.

Upgrade your MINI today with the M7 Speed MAXX-FLO (TM) Fresh Air System and experience enhanced performance and style! Access Secret Premium Dashboard

Complete Your MINI's Intake System with Our Premium Silicone Kit

This kit includes the intake boot, hot side boot, and cold side elbow to complete your intake system in silicone. It also provides a matching set for your engine bay.

This direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor that MINIs need.

M7 Speed Silicone Intake Hose

M7 Speed proudly introduces its 100% silicone, four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose offers unmatched durability, better airflow, and a long service life.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without modifications. This design prevents disruption to the PCV electrical connection, eliminating the risk of a DTC code (Check Engine Light). Each kit includes three stainless steel clamps and easy-to-follow installation instructions.

Note: This part fits only MINIs equipped with the N18 turbocharged engine with one large PCV vent hose connecting the intake hose to the cam cover. It also includes a sensor kit for the heater sensor on later N18 models, ensuring no CEL issues.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions for better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor, 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

• Enhances performance and efficiency for BMW and MINI vehicles
• Maximizes power output while ensuring engine safety
• Internal MAP sensor for precise control
• 35PSI maximum pressure capacity for reliability
• Improves horsepower, torque, and fuel economy