BMW A90 MKV Supra B58 3.0L

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

CNC Billet License Plate Bracket

T#:27105150

Part#: RE.061

In Stock

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.

Show More Show Less

Spark Plug Gapper Tool BMS Billet

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

BMW / MINI Jack Pad Adapters - Blue - Set Of 4

T#:31522930

Part#: BMWJACKPADBLUE4

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

330mm MOMO MOD.78 Steering Wheel

T#:301059

Part#: TMS301059

In Stock at Vendor

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

In Stock

$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Universal BMW Jack Pad Red - Set Of 4

T#:9803960

Part#: BMWJACKPADRED4

Ships in 2 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
Prevents damage to rocker panels or vehicle undercarriage
Made from solid billet aluminum for durability
Engraved Burger Motorsports logo for authenticity
Honeycomb grip pattern for stability during use

Show More Show Less

Billet Oil Filter Cap

T#:21045500

Part#: BMS-BOFC

In Stock

Starting at $ 79.00 USD

Add to Wish List

Starting at $ 79.00 USD

Add to Wish List

The Burger Motorsports billet aluminum B58 oil filter cover directly replaces your weak OE plastic cap for greater protection, ease of removal/install, and great looks under the hood. You can use a 3/8" inch drive ratchet or torque wrench to install and remove. The built-in 32mm hex head does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter insert. Anodized for protection. This quality part is a must for any serious BMW owner. Install: After removing the OEM oil filter cap, remove the filter and be sure to remove the plastic oil filter bypass valve and transfer it to the new BMS billet oil filter cap. Be sure to replace the exterior o-ring gasket also when installing. Features and Benefits Solid aluminum design is much stronger than brittle plastic Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter insert and o-ring Anodized for protection Looks great under the hood Available in black, red, silver, and blue Made in the USA

Show More Show Less

BMS Elite Charge Pipe - BMW Gen2 B58 3.0L (B58TU / B58C / B58D) ...

T#:21209828

Part#: B58G2CP

In Stock

Starting at $ 299.00 USD

Add to Wish List

Starting at $ 299.00 USD

Add to Wish List

Replace the failure prone plastic charge pipe that came on your car before it leaves you stranded! The BMS Elite B58TU charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It features a glossy black powder coat to coordinate with the engine bay and includes three 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. With a double o-ring seal design on the chargepipe flange that attaches to the turbo, this chargepipe is designed to withstand up to 40+psi of high boost. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware. Now available with or without a Turbosmart Raceport BOV! The blow-off valve version releases excess pressure in the charge pipes when letting off the gas. In addition to intoxicating sound, it reduces compressor surge and improves overall reliability at higher boost levels. Compatible with factory tuning, JB4, and flash tuning. What's Included with the NON-BOV kit ES4715295: (see below for BOV kit) (1) Upper charge pipe (1) Lower charge pipe (1) 3R2.5 silicone coupler (1) 2.5" Tbolt clamp (1) 3" Tbolt clamp (3) 1/8NPT plugs (1) M6x1x16mm bolt (2) M6x1x20mm bolts (2) Small O rings (1) Large O ring What's Included with the BOV kit ES4715315: (1) Turbosmart Blow-Off Valve (1) Lower charge pipe (1) Upper charge pipe with BOV flange (1) 3R2.5 silicone coupler (1) 2.5" Tbolt clamp (1) 3" Tbolt clamp (5) 1/8NPT plugs (1) M6x1x16mm bolt (2) M6x1x20mm bolts (2) Small O rings (1) Large O ring (1) BOV adapter + E clip (2) 90* 1/8NPT to 1/4" push lock fittings (1) 30" 1/4" tubing

Show More Show Less

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

BMW Jack Pad Silver - Set Of 4

T#:26438196

Part#: BMWJACKPADSILR4

Ships in 1 Business Day

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

BMC Performance Air Filter - G20, Supra

T#:641644

Part#: FB01054

In Stock at Vendor

$ 102.99 USD

Add to Wish List

Qty

$ 102.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

MOMO START Racing seat - ALL BMW & MINI

T#:583211

Part#: 1070BLK

Ships on Sep 9, 2026

$ 485.00 USD

Add to Wish List

Qty

$ 485.00 USD

Add to Wish List

MOMO Racing seats have bee proven to not only keep you in place, but also keep you alive. FIA 8855-1999 certification, Adjustable padding configuration, and 5 belt openings mean this seat can accommodate a wide range of Motorsport. The Start seat has a classic shape with aggressive side bolstering and a more upright seating position than the Super Cup.

Show More Show Less

Autosol Autosol Convertible Top Sealant and Protectant

T#:580275

Part#: AS7800

Back Ordered

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

The proper protection for your convertible top.

Extended Spark Plug Socket

T#:391150

Part#: SUU884506

In Stock

9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

Qty

9% off MSRP

$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

3/8" drive socket with 5/8" opening for most spark plugs

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

BMS Billet Intake For B58 - Z4/ Supra - Red

T#:38857229

Part#: BMS-B58BI-R

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Unlock up to 8whp with this plug-and-play air intake system, designed to enhance power, throttle response, and turbo spool while delivering an aggressive turbo sound under acceleration. Crafted from CNC-machined billet aluminum and anodized black for a sleek finish, this intake features a reusable S&B high-flow inverted cone filter for maximum airflow. The OEM cold air intake tube remains fully functional, ensuring optimal efficiency. Key Features & Benefits: ✅ Adds up to 8whp for increased performance ✅ Enhances throttle response & turbo spool ✅ Dramatic sound improvement – hear your turbo spool up ✅ High-quality CNC-machined billet aluminum construction ✅ Sleek black anodized finish for a clean look ✅ Reusable S&B high-flow inverted cone filter ✅ Quick & fully reversible installation in minutes 🔧 Made in the USA – Built for Performance Enthusiasts! 🔥

Show More Show Less

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

7 pc. 3/8" Dr. Spark Plug Socket Set

T#:641915

Part#: 8845D

Ships in 6 Business Days

$ 141.99 USD

Add to Wish List

Qty

$ 141.99 USD

Add to Wish List

Complete set of spark plug sockets.

Active Autowerke Catted Downpipe - B58 A90 Supra

T#:588008

Part#: A90CATDP

Ships in 3 Business Days

$ 1,424.99 USD

Add to Wish List

Qty

$ 1,424.99 USD

Add to Wish List

This downpipe has been proven to increase power by 18hp with a stock tune and upwards of 50hp with an aftermarket tune!

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Sep 2, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

MOMO MOD.78 Suede Steering Wheel - 330mm & 350mm

T#:338958

Part#: TMS1350

In Stock at Vendor

Starting at $ 279.00 USD

Add to Wish List

Starting at $ 279.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable and slip resistant black suede covering, and thumb recesses for comfort and control.

Show More Show Less

Akrapovic Titanium Slip-On Exhaust - A90 Supra

T#:588005

Part#: AKRS-TY/T/1H

Ships in 3 Business Days

$ 4,604.99

This product was last offered at the strikethrough price on
06-18-2026

$ 4,374.99 USD

Add to Wish List

Qty

$ 4,374.99 USD

Add to Wish List

An Axle-back slip-on system made from titanium for reduced weight and increased performance.

Active Autowerke Full Exhaust System - A90 Supra

Please call in with VIN before purchase

T#:2542968

Part#: 11-565

Ships in 3 Business Days

$ 2,089.99 USD

Add to Wish List

Qty

$ 2,089.99 USD

Add to Wish List

The A90 Supra exhaust system features a single 3.5 midpipe which improves flow while providing an aggressive tone to the exhaust note. The Brushed Stainless single-exit tips give this exhaust a high cosmetic appeal. This system maintains the factory valve, allowing you to be stealthy for those early mornings and long drives.

Show More Show Less

BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit - G2X/G42/A...

T#:49822554

Part#: BMSB58OCCFCDV

Ships on Sep 2, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Keep crankcase vapors in check and your intake air clean with the BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit for the Gen2 B58. This upgrade ditches the flimsy factory venting in favor of a precision CNC-machined billet oil filler cap and dual-vent fittings engineered to handle increased crankcase pressure under boost. By diverting oil-laden vapors into a catch can instead of back through the intake, this system helps minimize carbon buildup, reduces oily contamination, and promotes more consistent performance as power levels climb. High-quality hoses and fittings ensure a secure, leak-free install that won’t collapse under pressure and maintains a clean, OE-plus appearance in the engine bay. An easy, effective upgrade for B58 enthusiasts looking for cleaner operation, improved engine longevity, and proven performance-focused design

Show More Show Less

Burger Motorsports Billet Intake - A90 Supra G29 Z4

T#:588195

Part#: BMSA90INF

Ships on Sep 2, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Sep 2, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Autosol Convertible Top Cleaning Kit

T#:16450

Part#: 7950

Ships in 9 Business Days

$ 60.99 USD

Add to Wish List

Qty

$ 60.99 USD

Add to Wish List

Autosol's Convertible Top Cleaning Kit is a complete restoration kit for your canvas convertible top and plastic rear window. This package is an all-in-one solution for cleaning and protecting the fabric convertible top. Package includes Convertible Top Cleaner, Convertible Top Impregnating Agent (sealant and protectant), and Plastic Scratch Remover. First use the cleaner to remove dirt and stains. Then follow-up with the fabric treatment to preserve the color and protect against UV damage. Remove scratches, clean, and polish the plastic window back to its original clarity. Autosol is Made in Germany, and an OEM supplier to BMW for many of their Genuine BMW car care products.

Show More Show Less

3/8" Dr. External Star Impact Socket Set

T#:5269512

Part#: 3670SED

Ships on Sep 9, 2026

$ 65.99 USD

Add to Wish List

Qty

$ 65.99 USD

Add to Wish List

CR-MO alloy steel for long life

1/2" Drive 24mm Universal Impact Socket

T#:5229449

Part#: 224UMD

Ships on Sep 9, 2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Deep Impact Socket on a swivel.

3/8" Dr. Universal Impact Swivel Joint

T#:2528135

Part#: 3301D

Ships on Sep 9, 2026

5% off MSRP $ 26.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.89 USD

Add to Wish List

Qty

5% off MSRP

$ 26.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.89 USD

Add to Wish List

Designed for impact use

14 Pc. Full Polish SAE Angle Head Wrench Set

T#:642035

Part#: 9914A

Ships on Sep 9, 2026

$ 113.91 USD

Add to Wish List

Qty

$ 113.91 USD

Add to Wish List

Radius V-Groove design creates an anti-slip while also preventing round-off.

7-Piece Oxygen Sensor Socket Set

T#:5282862

Part#: 2850

Back Ordered

11% off MSRP $ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD

Add to Wish List

Qty

11% off MSRP

$ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD

Add to Wish List

Easily removes vacuum switches, oil pressure sending units, brake light switches, and oxygen sensors on most car models

MOMO Mod.08 Steering Wheel - Black - 350mm Suede

T#:343229

Part#: R1908/35S

Ships on Sep 10, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable suede covering, and an ergonomic feel for comfort and control. An ideal size for most cars and drivers, and made by renowned MOMO Italy. This is a most attractive and low cost solution. Hub adapter required.

Show More Show Less

MOMO Mod.88 Steering Wheel - Black - 350mm

T#:1863

Part#: TMS1863

Special Order: No Guaranteed ETA

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

MOMO Mod.88 Steering Wheel for track/competition use. An evolution to the hugely popular Mod 78 wheel. This wheel features a flat bottom for more leg clearance and better grip. It has a slightly oblong 350mm diameter rim with black suede covering.

Show More Show Less

MOMO Tuner Steering Wheel - Black Spoke 320mm

T#:388375

Part#: TUN32BK0B

Special Order: No Guaranteed ETA

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control. An ideal size for most cars and drivers, and made by renowned MOMO Italy. This is a most attractive and low cost solution. Hub adapter required.

Show More Show Less

MOMO Racing Prototipo 6C Steering Wheel - Black Leather Grip With Car...

T#:14122757

Part#: PRO35BK1C

Special Order: No Guaranteed ETA

$ 569.00 USD

Add to Wish List

Qty

$ 569.00 USD

Add to Wish List

MOMO Racing Prototipo 6C carbon fiber steering wheel feature spokes wrapped in genuine carbon fiber with smooth premium quality leather for the grip. MOMO individually selects hides from only the best suppliers to ensure they meet their high standards.

Show More Show Less

MOMO Team Steering Wheel

T#:390888

Part#: TEA-MOMO

Ships on Sep 21, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Mod.07 Steering Wheel

T#:339964

Part#: TMS21537

Ships on Sep 21, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

MOMO Mod 07 steering wheel is inspired by classic rally cars. Featuring a deep 70mm dish layout to put the wheel rim closer to the driver. Having the wheel closer to the driver means better leverage for quick steering corrections The Mod 07 has a standard 30mm round rim in either leather or suede.

Show More Show Less

MOMO Prototipo Steering Wheel - Silver - 350mm

T#:388372

Part#: PRO35BK0S

Special Order: No Guaranteed ETA

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Automatico Shift Knob - Leather/Chrome

T#:388399

Part#: AUTOBK1

Special Order: No Guaranteed ETA

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

MOMO Automatico leather shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. High quality black Endurance leather with bright chrome base. The Automatico knob favors over-palm shifting (the palm over the top of the knob) or pistol grip shifting. This knob is 9.8oz, heavier than most MOMO or factory BMW knobs. Comes with installation kit, ready to install.

Show More Show Less

MOMO Monte Carlo Steering Wheel - Red - 350mm

T#:388364

Part#: MCL35BK3B

Special Order: No Guaranteed ETA

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Daytona Racing Seat - All BMW

T#:585740

Part#: 1073KIT

Ships on Sep 21, 2026

Starting at $ 775.00 USD

Add to Wish List

Starting at $ 775.00 USD

Add to Wish List

MOMO Racing seats have bee proven to not only keep you in place, but also keep you alive. FIA 8855-1999 certification, Adjustable padding configuration, and 5 belt openings mean this seat can accommodate a wide range of Motorsport.

Show More Show Less

MOMO Tuner Steering Wheel

T#:340479

Part#: TUN35BK0B

Ships on Sep 21, 2026

Starting at $ 239.00 USD

Add to Wish List

Starting at $ 239.00 USD

Add to Wish List

The MOMO Tuner steering wheels combine the best features of all of the MOMO wheels. Stylish and functional, they give an immediate upgrade in steering feel and response while upgrading the aesthetics of your interior at the same time.

Show More Show Less

MOMO Prototipo Steering Wheel - Black - 350mm

T#:1040

Part#: PRO35BK2BLACK

Special Order: No Guaranteed ETA

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

MOMO Prototipo Black steering wheel. 350mm diameter (13.8 inches). Soft black leather rim with black anodized aluminum spokes. A beautiful addition to any interior. Perfect for vintage BMWs and Porsches because of its period-correct look.

Wheel hub adapter required.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results