Oiling System for BMW A90 MKV Supra B58 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Tasked with keeping everything properly lubricated, the oiling system is one of the most if not THE most fundamental parts of the engine. Make sure that everything is in good working order and flowing properly to ensure your engine has a long and trouble-free service life.

Sub-Categories

Sort By:

Genuine BMW Oil Filter Housing Gasket Set - BMW B58 3.0L (F & G-C...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:8045893
Part#: 11428583896KT
Ships Today
$ 108.99 USD
Free Shipping
$ 108.99 USD
Free Shipping
A common issue with multiple BMW engines is a leaky oil filter housing. Over time, gaskets become dry and brittle allowing oil to leak into your engine compartment. Replace these gaskets and stop having to top off your oil every month!
Show More Show Less
BMW B58 Magnetic Billet Oil Filter Housing Cap - Clear Anodized ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Paradigm Engineering - Corporate Logo
T#:5269540
Part#: OILCAPB58CLEAR
Ships in 5 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Paradigm Engineering’s B58 oil filter housing cap directly augments your vehicle's oil filtration system and serves as a diagnostic tool. Each B58 oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Nickel plated neodymium rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter and could be an indication of a serious issue within your engine.
Show More Show Less
VTT F Series B58 Engine Catch Can - W/ -6 Drain Valve
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:18236100
Part#: VTTB58CATCH1
Ships in 10 Business Days
$ 377.99 USD
Free Shipping
$ 377.99 USD
Free Shipping
VTT is proud to present our F Series B58 engine catch can setup. This kit includes our renowned modular catch can, a precision CNC-machined 6061 aluminum bracket, VTT CNC banjo fittings, robust 5-ply silicone hoses, and push-lock fittings. Installation is simple and takes approximately 30 minutes to 2 hours, depending on your experience, requiring the replacement of just one factory hose with the provided VTT hoses. The result is a clean, OEM-quality fit and finish. What distinguishes our kit from others is the use of high-quality AN fittings and VTT’s custom banjo adapters, delivering unmatched durability and performance.
Show More Show Less

Magnetic Billet Oil Filter Housing Cap For B58 - Red Anodized ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Paradigm Engineering - Corporate Logo
T#:5269542
Part#: OILCAPB58RED
Ships in 1-3 days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Paradigm Engineering’s B58 oil filter housing cap directly augments your vehicle's oil filtration system and serves as a diagnostic tool. Each B58 oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Nickel plated neodymium rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter and could be an indication of a serious issue within your engine.
Show More Show Less

Mishimoto Universal 10 Row Oil Cooler
For custom applications only. Not a direct bolt on.
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Mishimoto - Corporate Logo
T#:378421
Part#: MMOCU
In Stock
$ 410.99 USD
Free Shipping
$ 410.99 USD
Free Shipping
This universal oil cooler from Mishimoto is far superior to the factory unit with its 11" x 2.76" x 1.97" core. Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes 4 feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Mishimoto Automotive is a leading manufacturer of aftermarket performance cooling products. The company was established back in 2003 with one goal. That goal was to provide customers with quality cooling system upgrades that work on the track and on the road. At Mishimoto, you never have to worry about the quality of the product you are installing. This kit is universal and is not a direct bolt on. *For custom applications only. Not a direct bolt on. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
ECS Tuning Billet Aluminum Oil Filter Housing Cap - B58 3.0L ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
ECS - Corporate Logo
T#:392750
Part#: 017306ECS01
In Stock
Sale - Save 15% $ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 127.49 USD
Free Shipping
Sale - Save 15%
$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 127.49 USD
Free Shipping

BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.

 

Here is a link to the original Genuine BMW oil filter cap if you are looking for that instead.

Show More Show Less

VTT BMW G Series Billet Oil Cap - Blue Anodized
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:641130
Part#: OILCAPBLUE1
In Stock
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.
Show More Show Less
VTT BMW G Series Billet Oil Cap - Red Anodized
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:641120
Part#: OILCAPRED1
Ships in 10 Business Days
$ 62.99 USD
Free Shipping
$ 62.99 USD
Free Shipping
Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.
Show More Show Less

Mishimoto 19 Row Universal Oil Cooler
For custom applications only. Not a direct bolt on.
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Mishimoto - Corporate Logo
T#:378414
Part#: MMOCUL
In Stock at Vendor
$ 536.99 USD
Free Shipping
$ 536.99 USD
Free Shipping
Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:51813315
Part#: VTT-TI-DRAIN
In Stock
New Item
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.
Oil Drain Plug Repair Add On kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5175729
Part#: AGA-ODP-14-16-K
Ships in 7 Business Days
$ 446.99 USD
Free Shipping
$ 446.99 USD
Free Shipping
Don't let a cross threaded drainplug ruin your day!
CSF Universal Large Single-Pass Oil Cooler - Universal Application ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Universal fitment design - modifications may be necessary to run this cooler
CSF - Corporate Logo
T#:53608839
Part#: 8371
Ships in 3 Business Days
New Item
$ 499.00 USD
Free Shipping
$ 499.00 USD
Free Shipping
CSF redesigned this cooler and went with a more traditional inlet/outlet orientation. The new single pass design features high efficiency and high durability, but with vertically oriented inlet and outlet connections.
Show More Show Less


VTT BMW G Series Billet Oil Cap - Black Anodized
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:641127
Part#: OILCAPBLK1
Ships in 10 Business Days
$ 62.99 USD
Free Shipping
$ 62.99 USD
Free Shipping
Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.
Show More Show Less
CSF High-Performance Transmission Oil Cooler - A90/G20/G29
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
CSF - Corporate Logo
T#:5802180
Part#: 8183
Special Order: No Guaranteed ETA
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
CSF is the world leader in cooling technology. From its experience starting with the transmission in the BMW F8X M3, M4, and M2 Comp, CSF applied several different features exclusive to its manufacturing technologies. An innovative dual-core design allows for a 240% increase in core volume, resulting in maximum performance and maintaining optimal shifting during extreme racing conditions – from road racing to the drag strip. Features: 5.4mm Tall Multi-Louvered Fin vs. OEM 7mm 1-Row Super-High Pressure 16mm 9-Channel Microtube for Optimal Oil Flow and Maximum Surface Area Contact 129mm Overall Height vs. OEM 125mm Utilizes OEM Top/Bottom Rubber Seals for Optimal Airflow OEM Style “Quick Connect” Inlet/Outlet Connections Drop-in Fit Requires No Modifications to Install Compared to OE: 240% Increase in Core Volume 130% Increase in Fluid Capacity Compared to OEM (CSF 550ml vs. OEM ~240ml) Two 16mm Stacked Cores = 32mm Core Width (44mm Overall Width) vs. OEM 15mm Core Width Rear Cooler: 15 Rows vs. OEM 12 Rows Front Cooler: Additional 12 Rows
Show More Show Less
Vargas Billet Oil Drain Adapter - -10AN Male - BMW B58
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:52094563
Part#: VTT-FAB-040-AN
Ships in 10 Business Days
New Item
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
The VTT-FAB-040 is a high-performance billet aluminum adapter flange specifically engineered for the BMW B58 engine platform.

VTT -6 Dual Drain Valves - VTT Modular Catch Cans with -6 ORB bottom ...
For vehicles with VTT Modular PCV/Catch Can Systems
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:52270288
Part#: OCC1DUADRAVAL
Ships in 10 Business Days
New Item
$ 53.99 USD
Free Shipping
$ 53.99 USD
Free Shipping
Upgrade your engine bay’s efficiency with the Vargas Turbo Technologies -6 Dual Drain Valve system.

VTT Billet Oil Cap Crankcase Vent Adapter - Screw In - BMW S58, B58TU...
For vehicles with VTT Billet & Cast Valve Covers
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:52270290
Part#: OC16OADAPSC
Ships in 10 Business Days
New Item
$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping
Engineered for those who demand total control over their PCV system, the VTT Screw-In Oil Cap Adapter provides a robust solution for crankcase ventilation.
Vargas Engine Catch Can Kit - Toyota A90/91 Supra
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:51778125
Part#: VTT-SUPRA-CC-1
Ships in 10 Business Days
New Item
$ 369.99 USD
Free Shipping
$ 369.99 USD
Free Shipping
The VTT A90/91 Supra Engine Catch Can is an essential upgrade for any B58 owner looking to safeguard their engine’s longevity and performance.

24-270X Accusump Pro Electric Valve Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Canton Racing - Corporate Logo
T#:590562
Part#: 24-270X
Ships on Jun 25, 2026
$ 228.00 USD
Free Shipping
$ 228.00 USD
Free Shipping
CTS Turbo A90/A91 Billet Cap Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
CTS - Corporate Logo
T#:35256035
Part#: CTS-ACC-SUPRAKIT
Special Order: No Guaranteed ETA
$ 135.99 USD
Free Shipping
$ 135.99 USD
Free Shipping

CTS Turbo A90/A91 Billet Cap Kit enhances the aesthetic appeal of your Toyota Supra A90/A91 engine bay while maintaining functionality and durability. Designed to replace the standard OEM plastic caps, this billet cap kit is crafted from high-quality 6061-T6 billet aluminum and finished with a sleek black anodized coating for a clean, refined look. With a direct-fit design, installation is straightforward and requires no tools.

  • Transforms the engine bay with a premium appearance
  • Made from durable 6061-T6 billet aluminum for longevity
  • Black anodized finish for a sleek and sophisticated style
  • Direct replacement design ensures easy installation
  • Includes CTS-ACC-010, CTS-ACC-011, CTS-ACC-012, and CTS-ACC-013

Upgrade your Toyota Supra A90/A91 with the CTS Turbo A90/A91 Billet Cap Kit and add a touch of style to your engine bay effortlessly.

Show More Show Less