Home
Wheels
Wheel Bolts & Stud Conversions

BMW Wheel Bolts, Wheel Studs and Nuts for BMW A90 MKV Supra B58 3.0L

Clear BMW chassis

Any time you use a wheel spacer you MUST have a longer wheel bolt or wheel stud to properly fasten the wheel to the hub. We offer extended wheel spacer bolts in silver and black finish in a variety of lengths to fit many spacer sizes. We're up to date on the different thread sizing as well - 12x1.5, 14x1.25, and 14x1.5 so we can supply wheel bolts for just about any BMW or MINI.

Add the spacer thickness to your stock bolt length and that is your ideal extended bolt length. We generally sell bolts by spacer thickness but there may be exceptions. It's always best to measure from the wheel bolt you're currently using. When we list the total length of a bolt it's from the base of the mounting seat to the tip. To be considered safe, a 12x1.5 wheel bolt needs 10mm (6.5 turns) of thread engaged; a 14x1.25 or 14x1.5 bolt needs 12mm (9.0 and 7.5 turns) of engaged thread.

Sub-Categories

Sort By:

Conical Seat To Ball Seat Adapter - Set Of 20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:591025

Part#: MHCBAKT1

In Stock

Sale - Save 20% $ 39.99

This product was last offered at the strikethrough price on
05-03-2026

$ 31.84 USD

Add to Wish List

Qty

Sale - Save 20%

$ 39.99

This product was last offered at the strikethrough price on
05-03-2026

$ 31.84 USD

Add to Wish List

Vargas Turbo Wheel Stud Conversion Kit - G2X, A90/A91 Supra

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641936

Part#: M14125-STUD

In Stock

$ 145.99 USD

Add to Wish List

Qty

$ 145.99 USD

Add to Wish List

Wheel studs are among the safest and beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go. With studs you won't have to worry about dropping your expensive wheels onto the brake rotor. This kit includes: M14x1.25 to M14x1.50 CONVERSION Wheel studs in Black (20) M14x.1..5 19mm Black opened ended lug nuts (20) *Note: Apply Medium duty lock-tite to the studs (short thread end) and torque to 25 ft/lb. Lug nuts should be torqued to OEM specifications. For your safety retorque all hardware (studs and nuts) after 25-50 Miles

Show More Show Less

Turbo-Lock Blue Medium Threadlocker (10ml Bottle)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:215383

Part#: 11-010BC

In Stock

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Threadlocker is essential when doing any work to your car, especially prepping it for the track. Loose bolts should never happen! If you are a do-it-youselfer, or do much wrench turning, then you know about threadlocker (generically known as "locktite" or by the brand name Loctite). You also know a little goes a long way. This small bottle of Palm Labs Turbo-Lock blue threadlock is perfect for that small job -- or a few small jobs! This tube has 10 mL (0.34 fluid ounces) of moderate temp, medium-strength threadlocker. This bottle comes with two ways to apply: with a squeeze or with the included brush. There are just too many different uses for this, and no mechanic or DIYer, should be without some in his or her toolbox.

Red or Blue threadlocker? Red is the highest strength so use it when the fastener will not be removed regularly or ever again. The Red will need a great amount of force to break free and maybe even heat. Blue is the medium strength and will break free with hand tools. Use it for fasteners that need extra locking protection but will be removed / disassmebled on a semi-regular basis.

Palm Labs Turbo-Lock Blue Features:

color: blue

Anaerobic Thread-locking Compound

permanent

medium strength

moderate temperature resistant

oil resistant

primerless

acceptable up to 20mm (3/4") bolts
Equivalent or superior to Loctite 242.

MSDS Data Sheet
Technical Data Sheet

Show More Show Less

Conical Seat To Ball Seat Adapter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:591022

Part#: MHCBA

In Stock

Sale - Save 20% $ 1.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 1.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1.59 USD

Add to Wish List

Turbo-Lock Red High-Strength Threadlocker (10ml Bottle)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:215382

Part#: 12-010BC

In Stock

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Threadlocker is essential when doing any work to your car, especially prepping it for the track. Loose bolts should never happen! If you are a do-it-youselfer, or do much wrench turning, then you know about threadlocker (generically known as "locktite" or by the brand name Loctite). You also know a little goes a long way. This small bottle of Palm Labs Turbo-Lock red threadlock is perfect for that small job -- or a few small jobs! This tube has 10 mL (0.34 fluid ounces) of high-temp, high-strength threadlocker. This bottle comes with two ways to apply: with a squeeze or with the included brush. There are just too many different uses for this, and no mechanic or DIYer, should be without some in his or her toolbox.

Red or Blue threadlocker? Red is the highest strength so use it when the fastener will not be removed regularly or ever again. The Red will need a great amount of force to break free and maybe even heat. Blue is the medium strength and will break free with hand tools. Use it for fasteners that need extra locking protection but will be removed / disassmebled on a semi-regular basis.

Palm Labs Turbo-Lock Series 13-OR Features:

color: red/orange

Anaerobic Thread-locking Compound

permanent

high strength

high temperature resistant

oil resistant

primerless

acceptable up to 20mm (3/4") bolts
Equivalent or superior to Loctite 262.

MSDS Data Sheet
Technical Data Sheet

Show More Show Less

Extended Wheel Bolt - M12x1.5 - 35mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:50899204

Part#: BFI-906-LUG

Ships on Jun 25, 2026

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Specifically engineered for vehicles utilizing a wheel stud conversion.

E-Z Chamfer - Large

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21604316

Part#: CTA3840

Ships on Jun 19, 2026

$ 91.99 USD

Add to Wish List

Qty

$ 91.99 USD

Add to Wish List

The E-Z Chamfer deburring tool, constructed from High Speed Steel (HSS), is designed to eliminate burrs and ridges from threaded rods, bolts, pipes, and bar stock. Its size range of 0.7” – 1.5” (18-38mm) allows efficient removal of threads and burrs, creating a smooth chamfer for effortless nut and die insertion. Compatible with mild, hard, very hard, stainless, and super hard steels, it delivers optimal results when used with slow drill speeds and moderate pressure on most materials. To extend the tool's lifespan, it's advisable to operate at speeds below 800RPM and refrain from using impact drivers. Typically, only 1-3 threads need chamfering for a clean start.

Additionally, E-Z Chamfer sizes between 18-24mm require a speed of 600RPM, those ranging from 23-29mm perform optimally at 400RPM, and sizes from 30-38mm are best suited for a speed of 300RPM.

Show More Show Less

H&R Wheel Stud

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:567076

Part#: 1254554

Ships on Jun 25, 2026

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

12 X 1.5 X 45mm

Select Vehicle

Purpose

Category

Home
Wheels

Wheel Bolts & Stud Conversions

Brand

Price

Special Offers

Shipping