Genuine BMW Wheel Center Cap - 68mm

T#:4539

Part#: 36136783536

In Stock

5% off MSRP $ 22.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.80 USD

Add to Wish List

Qty

5% off MSRP

$ 22.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.80 USD

Add to Wish List

This genuine BMW hub cap with roundel emblem snaps into the opening in the center of the wheel. Fits nearly every BMW wheel since 1992. Sold Individually.

Set of 4 BMW Hub Caps - E36 E46 E9X E39 E60 + More

T#:184009

Part#: 36136783536X4

In Stock

$ 83.99 USD

Add to Wish List

Qty

$ 83.99 USD

Add to Wish List

Set of four Genuine BMW wheel center cap with roundel emblem (Part number 36136783536). These snap into the opening in the center of the wheel.

This item fits the following BMWs:
2008+ E82 BMW 128i 135i
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006+ E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335i 335xi 335i xDrive M3
2007+ E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3
2007+ E93 BMW 328i 335i M3
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
2010+ F07 BMw 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011+ F10 BMw 528i 535i 535i xDrive 550i 550i xDrive
2004+ E63 BMW 645ci 650i M6
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2009+ F01 BMW 750i 750li 750i xDrive 750li xDrive 760li
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive48i X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less

Black Wheel Spacer & Bolt Kit - 15mm - Turner Motorsport

10X Entries Into Our F80 M3 Sweepstakes

T#:568463

Part#: 021460TMS03KT3

In Stock

Sale - Save 15% $ 196.99

This product was last offered at the strikethrough price on
06-14-2026

$ 167.40 USD

Add to Wish List

Qty

Sale - Save 15%

$ 196.99

This product was last offered at the strikethrough price on
06-14-2026

$ 167.40 USD

Add to Wish List

15MM (.59 inch) Wheel Spacer for BMW G11, G30, I01, I12, F48, F90 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market! Turner Wheel Spacer Features -- + hub-centric design, 1-piece spacer + precise tolerance fitment thanks to CAD process and CNC mill machine + aerospace grade aluminum light weight but very strong with a high resistance to corrosion + additional military-spec hardcoat for further corrosion resistance + innovative Quick Release pockets for easy removal (better than a chamfered back edge) + laser engraved size and part number for easy identification + stealthy anthracite or black color + extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) + Turner Motorsport track and street tested! + Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: (click to expand) How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: (click to expand) Spacer Specs: bolt pattern:5x112 center bore:66.6mm hubcentric?yes wheel pad size:normal Year & Model Applications (click to expand)

Show More Show Less

Turner Motorsport 12.5mm Black Wheel Spacer & Bolt Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:568464

Part#: 021460TMS03KT

In Stock

Sale - Save 42% $ 288.99

This product was last offered at the strikethrough price on
05-03-2026

$ 167.40 USD

Add to Wish List

Qty

Sale - Save 42%

$ 288.99

This product was last offered at the strikethrough price on
05-03-2026

$ 167.40 USD

Add to Wish List

15MM (.59 inch) Wheel Spacer for BMW G11, G30, I01, I12, F48, F90 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market! Turner Wheel Spacer Features -- + hub-centric design, 1-piece spacer + precise tolerance fitment thanks to CAD process and CNC mill machine + aerospace grade aluminum light weight but very strong with a high resistance to corrosion + additional military-spec hardcoat for further corrosion resistance + innovative Quick Release pockets for easy removal (better than a chamfered back edge) + laser engraved size and part number for easy identification + stealthy anthracite or black color + extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) + Turner Motorsport track and street tested! + Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: (click to expand) How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: (click to expand) Spacer Specs: bolt pattern:5 x 120 center bore:72.6mm hubcentric?yes wheel pad size:normal Year & Model Applications (click to expand)

Show More Show Less

Genuine BMW Roundel Valve Stem Caps - Set Of 4

T#:548001

Part#: 36122447401

In Stock

12% off MSRP $ 26.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 22.86 USD

Add to Wish List

Qty

12% off MSRP

$ 26.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 22.86 USD

Add to Wish List

Turner Motorsport Black Wheel Spacer & Bolt Kit - 20mm

10X Entries Into Our F80 M3 Sweepstakes

T#:568460

Part#: 021460TMS03KT7

In Stock

Sale - Save 20% $ 254.99

This product was last offered at the strikethrough price on
06-14-2026

$ 203.91 USD

Add to Wish List

Qty

Sale - Save 20%

$ 254.99

This product was last offered at the strikethrough price on
06-14-2026

$ 203.91 USD

Add to Wish List

20MM (.79 inch) Wheel Spacer for BMW G11, G30, I01, I12, F48, F90 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum light weight but very strong with a high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 112 center bore: 66.56mm hubcentric: yes wheel pad size: normal

Show More Show Less

Turner Black 17.5mm Wheel Spacers with Extended Bolts (Pair) - G11 G3...

10X Entries Into Our F80 M3 Sweepstakes

T#:568462

Part#: 021460TMS03KT5

In Stock

Sale - Save 5% $ 207.99

This product was last offered at the strikethrough price on
06-14-2026

$ 197.54 USD

Add to Wish List

Qty

Sale - Save 5%

$ 207.99

This product was last offered at the strikethrough price on
06-14-2026

$ 197.54 USD

Add to Wish List

Our 17.5mm wheel spacers are lightweight, featuring a durable coating and quick release pockets for easy removal. Longer wheel bolts are required, included in this kit!

Genuine BMW Valve Stem Caps - "///M" Logo (Set of 4)

T#:44

Part#: 36110421543

Ships in 1-2 days

7% off MSRP $ 23.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.37 USD

Add to Wish List

Qty

7% off MSRP

$ 23.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.37 USD

Add to Wish List

Spruce up your wheels with these tire valve stem caps from BMW. These are Genuine BMW parts and feature the ///M Motorsport Logo.

Turner Black Wheel Spacer & Bolt Kit - 7.5mm - G11, G30, I01, I12, F4...

10X Entries Into Our F80 M3 Sweepstakes

T#:568466

Part#: 021460TMS02KT4

In Stock

Sale - Save 25% $ 204.99

This product was last offered at the strikethrough price on
06-14-2026

$ 153.67 USD

Add to Wish List

Qty

Sale - Save 25%

$ 204.99

This product was last offered at the strikethrough price on
06-14-2026

$ 153.67 USD

Add to Wish List

Our 7.5mm wheel spacers are lightweight, featuring a durable coating and quick release pockets for easy removal. Longer wheel bolts are required and included in this kit!

Turner Motorsport Black Wheel Spacer Pair - 5mm - G11, G30, I01, I12,...

10X Entries Into Our F80 M3 Sweepstakes

T#:553905

Part#: 021460TMS02-04

In Stock

Sale - Save 25% $ 149.99

This product was last offered at the strikethrough price on
06-14-2026

$ 112.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 149.99

This product was last offered at the strikethrough price on
06-14-2026

$ 112.49 USD

Add to Wish List

5MM (.19 inch) Wheel Spacer for BMW G11, G30, I01, I12, F48, F90 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Spacer Specs: bolt pattern: 5 x 112 center bore: 66.56mm hubcentric: yes wheel pad size: normal

Show More Show Less

15mm Wheel Spacers - Black (Pair)

10X Entries Into Our F80 M3 Sweepstakes

T#:553909

Part#: 021460TMS03-04

In Stock

Sale - Save 15% $ 151.99

This product was last offered at the strikethrough price on
06-14-2026

$ 129.19 USD

Add to Wish List

Qty

Sale - Save 15%

$ 151.99

This product was last offered at the strikethrough price on
06-14-2026

$ 129.19 USD

Add to Wish List

15MM (.59 inch) Wheel Spacer for BMW G11, G30, I01, I12, F48, F90 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market! Turner Wheel Spacer Features -- + hub-centric design, 1-piece spacer + precise tolerance fitment thanks to CAD process and CNC mill machine + aerospace grade aluminum light weight but very strong with a high resistance to corrosion + additional military-spec hardcoat for further corrosion resistance + innovative Quick Release pockets for easy removal (better than a chamfered back edge) + laser engraved size and part number for easy identification + stealthy anthracite or black color + extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) + Turner Motorsport track and street tested! + Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: (click to expand) How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: (click to expand) Spacer Specs: bolt pattern:5 x 112 center bore:66.6mm hubcentric?yes wheel pad size:normal Year & Model Applications (click to expand)

Show More Show Less

Turner Motorsport 7.5mm Black Wheel Spacers - G11, G30, I01, I12, F48...

10X Entries Into Our F80 M3 Sweepstakes

T#:553901

Part#: 021460TMS02-06

In Stock

Sale - Save 25% $ 131.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 131.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

Our 7.5mm wheel spacers are lightweight, featuring a durable coating and quick release pockets for easy removal. Longer wheel bolts are required!

Turner Motorsport 10mm Black Wheel Spacers - G11, G30, I01, I12, F48,...

10X Entries Into Our F80 M3 Sweepstakes

T#:553908

Part#: 021460TMS02-08

In Stock

Sale - Save 5% $ 147.99

This product was last offered at the strikethrough price on
06-14-2026

$ 140.59 USD

Add to Wish List

Qty

Sale - Save 5%

$ 147.99

This product was last offered at the strikethrough price on
06-14-2026

$ 140.59 USD

Add to Wish List

Our 10mm wheel spacers are lightweight, featuring a durable coating and quick release pockets for easy removal. Longer wheel bolts are required!

12.5mm Big Pad Wheel Spacers - Black (Pair)

10X Entries Into Our F80 M3 Sweepstakes

T#:553904

Part#: 021460TMS03-02

In Stock

Sale - Save 53% $ 243.99

This product was last offered at the strikethrough price on
05-03-2026

$ 113.99 USD

Add to Wish List

Qty

Sale - Save 53%

$ 243.99

This product was last offered at the strikethrough price on
05-03-2026

$ 113.99 USD

Add to Wish List

12.5MM (.49 inch) Wheel Spacer for BMW G11, G30, I01, I12, F48, F90 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market! Turner Wheel Spacer Features -- + hub-centric design, 1-piece spacer + precise tolerance fitment thanks to CAD process and CNC mill machine + aerospace grade aluminum light weight but very strong with a high resistance to corrosion + additional military-spec hardcoat for further corrosion resistance + innovative Quick Release pockets for easy removal (better than a chamfered back edge) + laser engraved size and part number for easy identification + stealthy anthracite or black color + extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) + Turner Motorsport track and street tested! + Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 112 center bore: 66.56mm hubcentric: yes wheel pad size:normal

Show More Show Less

Vargas Turbo Wheel Stud Conversion Kit - G2X, A90/A91 Supra

2X Entries Into Our F80 M3 Sweepstakes

T#:641936

Part#: M14125-STUD

In Stock

$ 145.99 USD

Add to Wish List

Qty

$ 145.99 USD

Add to Wish List

Wheel studs are among the safest and beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go. With studs you won't have to worry about dropping your expensive wheels onto the brake rotor. This kit includes: M14x1.25 to M14x1.50 CONVERSION Wheel studs in Black (20) M14x.1..5 19mm Black opened ended lug nuts (20) *Note: Apply Medium duty lock-tite to the studs (short thread end) and torque to 25 ft/lb. Lug nuts should be torqued to OEM specifications. For your safety retorque all hardware (studs and nuts) after 25-50 Miles

Show More Show Less

Turner Motorsport Black 10mm Wheel Spacer & Bolt Kit - G11, G30, I01,...

10X Entries Into Our F80 M3 Sweepstakes

T#:568465

Part#: 021460TMS02KT2

In Stock

Sale - Save 10% $ 217.99

This product was last offered at the strikethrough price on
06-14-2026

$ 196.10 USD

Add to Wish List

Qty

Sale - Save 10%

$ 217.99

This product was last offered at the strikethrough price on
06-14-2026

$ 196.10 USD

Add to Wish List

Our 10mm wheel spacers are lightweight, featuring a durable coating and quick release pockets for easy removal. Longer wheel bolts are required and included in this kit!

Tire Valve For TPMS Systems

T#:641919

Part#: AUL1SENSOR

In Stock

Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

Qty

Sale - Save 29%

$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use

Turner Motorsport Black Wheel Spacer & Bolt Kit - 5mm

10X Entries Into Our F80 M3 Sweepstakes

T#:554398

Part#: 021460TMS02KT

In Stock

Sale - Save 25% $ 209.99

This product was last offered at the strikethrough price on
06-14-2026

$ 157.42 USD

Add to Wish List

Qty

Sale - Save 25%

$ 209.99

This product was last offered at the strikethrough price on
06-14-2026

$ 157.42 USD

Add to Wish List

5MM (.19 inch) Wheel Spacer for BMW G11, G30, I01, I12, F48, F90 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Spacer Specs: bolt pattern: 5 x 112 center bore: 66.56mm hubcentric: yes wheel pad size: normal

Show More Show Less

20mm Wheel Spacers - Black (Pair)

10X Entries Into Our F80 M3 Sweepstakes

T#:553912

Part#: 021460TMS03-08

In Stock

Sale - Save 20% $ 164.99

This product was last offered at the strikethrough price on
06-14-2026

$ 131.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 164.99

This product was last offered at the strikethrough price on
06-14-2026

$ 131.99 USD

Add to Wish List

20MM (.79 inch) Wheel Spacer for BMW G11, G30, I01, I12, F48, F90 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Spacer Specs: bolt pattern: 5 x 112 center bore: 66.56mm hubcentric: yes wheel pad size: normal

Show More Show Less

Turner Silver 12.5mm Wheel Spacers - G11 G30 I01 I12 F48 F90 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:553910

Part#: 021460TMS03-01

In Stock

Sale - Save 3% $ 145.99

This product was last offered at the strikethrough price on
05-03-2026

$ 141.61 USD

Add to Wish List

Qty

Sale - Save 3%

$ 145.99

This product was last offered at the strikethrough price on
05-03-2026

$ 141.61 USD

Add to Wish List

Our 12.5mm wheel spacers are lightweight, featuring a durable coating and quick release pockets for easy removal. Longer wheel bolts are required!

Turner Black 17.5mm Wheel Spacers - G11 G30 I01 I12 F48 F90

10X Entries Into Our F80 M3 Sweepstakes

T#:553915

Part#: 021460TMS03-06

In Stock

Sale - Save 5% $ 162.99

This product was last offered at the strikethrough price on
06-14-2026

$ 154.84 USD

Add to Wish List

Qty

Sale - Save 5%

$ 162.99

This product was last offered at the strikethrough price on
06-14-2026

$ 154.84 USD

Add to Wish List

Our 17.5mm wheel spacers are lightweight, featuring a durable coating and quick release pockets for easy removal. Longer wheel bolts are required!

Autel Universal Rubber TPMS Sensor - Set Of Four

T#:3529121

Part#: AUL1SENSORKT

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

Turner Motorsport Silver Wheel Spacer & Bolt Kit - 12.5mm

10X Entries Into Our F80 M3 Sweepstakes

T#:568470

Part#: 021460TMS03KT2

In Stock

Sale - Save 3% $ 193.94

This product was last offered at the strikethrough price on
06-14-2026

$ 188.12 USD

Add to Wish List

Qty

Sale - Save 3%

$ 193.94

This product was last offered at the strikethrough price on
06-14-2026

$ 188.12 USD

Add to Wish List

12.5MM (.49 inch) Wheel Spacer for BMW G11, G30, I01, I12, F48, F90 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market! Turner Wheel Spacer Features -- + hub-centric design, 1-piece spacer + precise tolerance fitment thanks to CAD process and CNC mill machine + aerospace grade aluminum light weight but very strong with a high resistance to corrosion + additional military-spec hardcoat for further corrosion resistance + innovative Quick Release pockets for easy removal (better than a chamfered back edge) + laser engraved size and part number for easy identification + stealthy anthracite or black color + extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) + Turner Motorsport track and street tested! + Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: (click to expand) How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: (click to expand) Spacer Specs: bolt pattern:5 x 112 center bore:74.1mm hubcentric?yes wheel pad size:normal Year & Model Applications (click to expand)

Show More Show Less

M Sport Wheel Emblem (Genuine BMW) 18mm x 10mm

T#:1129

Part#: 36112228660

In Stock

6% off MSRP $ 11.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10.39 USD

Add to Wish List

Qty

6% off MSRP

$ 11.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10.39 USD

Add to Wish List

This self-adhesive backed emblem features the iconic BMW M logo and is used on all of the factory M Sport wheels, such as original M3 wheels, M5 wheels, M6 wheels, and many M wheels offered for non-M cars, such as the 740i Sport, and 330i sport & zhp packages (and others). Replace those missing or damaged ///M emblems with NEW factory fresh ones. It only takes a few seconds. Simply peel off the backing paper, and stick them on your wheels. These are the Genuine BMW emblems (not the shoddy / illegal knock-offs you'll find offered elsewhere for nearly the same price). These are sold individually, so be sure to order enough for all of your wheels (and your tool box!)

Installation Tip: We suggest cleaning the surface you are sticking this wheel emblem to before adhering it. This ensures the adhesive makes a tight bond, and your new M wheel emblems won't be going anywhere.

Show More Show Less

APR Valve Stem Caps - Set Of 4 - Silver

Call In Or Chat For Best Price!

T#:31125602

Part#: MS100178

In Stock

Sale - Save 10% $ 15.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 14.36 USD

Add to Wish List

Qty

Sale - Save 10%

$ 15.99

This product was last offered at the strikethrough price on
09-29-2026

$ 14.36 USD

Add to Wish List

APR Valve Stem Caps - Set Of 4 - Silver are a stylish and functional upgrade for any vehicle. This set includes four high-quality aluminum valve stem caps, each engraved with the distinctive APR logo. These caps are designed to enhance the appearance of your wheels while providing durability and reliability.

Stylish Appearance: Each cap features a sleek silver finish and an engraved APR logo, adding a touch of elegance to your vehicle.
Durable Construction: Made from high-quality aluminum, these valve stem caps are built to withstand harsh conditions and resist corrosion.
Easy Installation: Simple to install and compatible with most standard valve stems.
Enhanced Wheel Aesthetics: Upgrades the look of your wheels with a subtle yet impactful design.
Functional Protection: Helps protect valve stems from dirt and moisture, ensuring consistent performance.

This set of valve stem caps is an excellent choice for anyone looking to add a refined touch to their vehicle's wheels.

Show More Show Less

Genuine BMW Wheels Rubber Valve 36121116326

T#:12766

Part#: 36121116326

In Stock

$ 6.28 USD

Add to Wish List

Qty

$ 6.28 USD

Add to Wish List

Used on a wide variety of both BMW and MINI wheels. Best to replace whenever new tires are being installed.

Genuine BMW Rubber Valve - L=42,5Mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E60 M5,E63 M6,E46 M3,E70 X5M,E71 X6M,E82 1M Coupe,E85 Z4M,E53 48IS,E30,E34,E36,E38,E39,E46,E53 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3i12

Show More Show Less

APR Valve Stem Caps - Set Of 4 - Gunmetal

Call In Or Chat For Best Price!

T#:31092523

Part#: MS100179

In Stock

Sale - Save 10% $ 15.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 14.36 USD

Add to Wish List

Qty

Sale - Save 10%

$ 15.95

This product was last offered at the strikethrough price on
09-29-2026

$ 14.36 USD

Add to Wish List

APR Valve Stem Caps - Set Of 4 - Gunmetal offer a stylish and functional upgrade for any vehicle. These high-quality aluminum valve stem caps come in a sleek gunmetal finish and feature an engraved APR logo, which adds a touch of sophistication to your wheels.

Material: Made from durable aluminum for long-lasting performance
Design: Engraved APR logo adds a distinctive look
Finish: Gunmetal color enhances the visual appeal of your wheels
Set Includes: 4 valve stem caps for a complete upgrade
Compatibility: Fits most standard valve stems

These APR Valve Stem Caps are designed to provide both aesthetics and durability, making them a great choice for enhancing your vehicle's style.

Show More Show Less

APR Black Valve Stem Caps - Pack of 4

Call In Or Chat For Best Price!
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:22987107

Part#: MS100197

In Stock

Sale - Save 10% $ 15.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 14.36 USD

Add to Wish List

Qty

Sale - Save 10%

$ 15.99

This product was last offered at the strikethrough price on
05-10-2026

$ 14.36 USD

Add to Wish List

APR Black Valve Stem Caps are a stylish and functional upgrade for your vehicle's wheels. Sold as a set of four, these high-quality aluminum caps feature an engraved APR logo on each cap. Designed to add a touch of customization to your vehicle, they also serve a practical purpose.

Premium Quality: Made from durable aluminum for long-lasting performance.
Enhanced Aesthetics: Features an engraved APR logo for a sleek and stylish look.
Functional Design: Helps protect valve stems from dirt and moisture.
Easy Installation: Simple to install and compatible with most standard valve stems.

Upgrade your vehicle with APR Black Valve Stem Caps to enhance both style and functionality.

Show More Show Less

Genuine BMW Conical Seat 14x1.25x27mm Wheel Bolt - BMW & MINI ...

T#:568412

Part#: 36136890324

In Stock

$ 8.28 USD

Add to Wish List

Qty

$ 8.28 USD

Add to Wish List

This is a Genuine BMW replacement black wheel bolt perfect for replacing a rusted or damaged bolt or as an upgrade from a silver wheel bolt.

Genuine BMW E34 / M5 Badge D=70mm - 36131122132

T#:8212

Part#: 36131122132

In Stock

6% off MSRP $ 15.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 14.99 USD

Add to Wish List

Qty

6% off MSRP

$ 15.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 14.99 USD

Add to Wish List

Genuine BMW E34 / M5 Badge D=70mm

Ensure authenticity and style with the Genuine BMW E34 / M5 Badge D=70mm. This emblem, designed specifically for BMW E34 and M5 models, adds a touch of sophistication to your vehicle's exterior. Elevate your BMW's appearance with this genuine badge from BMW.

Genuine BMW emblem for authenticity and quality
Specifically designed for BMW E34 and M5 models
Adds sophistication and style to your vehicle's exterior
Easy installation for hassle-free upgrade
Enhances the appearance of your BMW

Genuine BMW Badge - D=70mm
This item fits the following BMW Chassis:
E34 M5,E34

Show More Show Less

Genuine BMW Wheel Bolt Black - 36136795153

T#:215964

Part#: 36136795153

Ships in 1-2 days

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Genuine BMW Wheel Bolt Black - 36136795153

E-Z Chamfer - Large

T#:21604316

Part#: CTA3840

Ships on Oct 27, 2026

$ 91.99 USD

Add to Wish List

Qty

$ 91.99 USD

Add to Wish List

The E-Z Chamfer deburring tool, constructed from High Speed Steel (HSS), is designed to eliminate burrs and ridges from threaded rods, bolts, pipes, and bar stock. Its size range of 0.7” – 1.5” (18-38mm) allows efficient removal of threads and burrs, creating a smooth chamfer for effortless nut and die insertion. Compatible with mild, hard, very hard, stainless, and super hard steels, it delivers optimal results when used with slow drill speeds and moderate pressure on most materials. To extend the tool's lifespan, it's advisable to operate at speeds below 800RPM and refrain from using impact drivers. Typically, only 1-3 threads need chamfering for a clean start.

Additionally, E-Z Chamfer sizes between 18-24mm require a speed of 600RPM, those ranging from 23-29mm perform optimally at 400RPM, and sizes from 30-38mm are best suited for a speed of 300RPM.

Show More Show Less

Supra Flush Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:588734

Part#: A90FLUSH1TKT

In Stock

Sale - Save 42% $ 577.99

This product was last offered at the strikethrough price on
05-03-2026

$ 334.80 USD

Add to Wish List

Qty

Sale - Save 42%

$ 577.99

This product was last offered at the strikethrough price on
05-03-2026

$ 334.80 USD

Add to Wish List

Wheel Storage Rack With Casters With Tire Stack Cover

T#:26505028

Part#: 003639SCH01A02KT

In Stock

Sale - Save 18% $ 97.99

This product was last offered at the strikethrough price on
05-05-2026

$ 79.99 USD

Add to Wish List

Qty

Sale - Save 18%

$ 97.99

This product was last offered at the strikethrough price on
05-05-2026

$ 79.99 USD

Add to Wish List

WHEEL STORAGE RACK:

Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

Fits up to 8½" wide wheels, depending on offset

TIRE STACK COVER:

This tire stack by Schwaben is the solution to keeping your tires and wheels clean while in storage.

Works with 4 tire stacks and works great with our Schwaben Wheel Tree (ES2710754).
Durable 150D coated material is rated for outdoor use.
Cover is a large 32" wide X 46" tall.
Fitted with a long 29" zipper up the side for easy installation and removal.
Nylon draw string at the bottom allows for a good snug fit.
Includes a handy storage pouch if not in use.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Seasonal Tire Tote (set of 4)

10X Entries Into Our F80 M3 Sweepstakes

T#:3463

Part#: 00036

In Stock

Sale - Save 18% $ 71.99

This product was last offered at the strikethrough price on
06-13-2026

$ 58.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 18%

$ 71.99

This product was last offered at the strikethrough price on
06-13-2026

$ 58.99 USD

Limited Qty Sale

Add to Wish List

Tire carrying and storage system that alleviates the mess and strain of seasonal tire change.

Benefits:
�+�Protects clothing from tire and brake residue
�+�Easier to carry tire
�+�Protects vehicle interior from tire & brake residue
�+�Organizes garage
�+�One size fits all
�+�Extends the life of the tire
�+�Machine Washable
+�Rugged long lasting construction

Kit Includes : - Four Tire Bags, fit most passenger vehicles. (22" through 31" tire)

Show More Show Less