BMW Engine Parts for BMW A90 MKV Supra B58 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Conti Tech Rubber High-Pressure Hose
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:378830
Part#: N0202811
Ships in 3 Business Days
$ 34.84 USD
Free Shipping on orders $49 and up
7mm O.D X 2.5mm I.D.
Motiv Motorsports - Corporate Logo
T#:29201085
Part#: 200.1058
Ships in 4 Business Days
$ 794.00 USD
Free Shipping on orders $49 and up
Tensility Motorsports has developed a plug and play kit for the ReFlex+ that was engineered to meet our high quality standards. TMS has been approved by MOTIV to manufacturer harnesses and they will not void your warranty on MOTIV ReFlex+ products. With attention to detail in the selection of wiring, production standards, and quality assurance, TMS plug and play harnesses ensure a consistent and reliable installation for a hassle-free experience. Each harness kit includes all the necessary components to install and run a ReFlex+ Advanced I/O Controller on the vehicle it was designed for. The harness is divided into a few separate pieces for ease of installation and a very clean finished look. Main Harness: This section of the TMS harness kit includes plug and play connections to the vehicles Cam, Crank, and TMAP sensors, 6 injector runs for port injection, the ethanol content sensor connector, and DTM connections for all of the auxiliary inputs and outputs. CAN+ Power Splitter: A clean over-molded compact harness that provides a plug and play connection to your vehicles Body Domain Controller. This section is where the kit will get power, ground, and connect to the CANbus network. Auxiliary Cable Pack: Four additional cables are included to simplify future expansions such as additional sensors, methanol, NOS, fuel pump relays, etc. These 8 ft. cables plug directly into the unused ReFlex+ harness auxiliary ports Aux Out 1/2/3 and Aux In 4 (PSI).
Show More Show Less
Autel - Corporate Logo
T#:2914116
Part#: AL329
Ships in 1 Business Day
$ 49.99 USD
Free Shipping on orders $49 and up
OBDII Code Reader

Shaft Seal - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:638353
Part#: 11118604931
Ships in 1 Business Day
$ 28.99

This product was last offered at the strikethrough price on
08-26-2026

$ 26.99 USD
Free Shipping on orders $49 and up
$ 26.99 USD
Free Shipping on orders $49 and up

Vargas Turbo Technologies - Corporate Logo
T#:9416039
Part#: B58GCMID2-4-INS
Ships in 10 Business Days
$ 2,640.99 USD
Free Shipping on orders $49 and up
Ready to take your B58 to the next level? Don’t want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting B58 “GC” “GC-MID” and “GC+” turbocharger upgrade. VTT starts by keeping the great design elements of the factory B58 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else that could be improved upon. With the basics covered, VTT stepped it up a level adding in proprietary VTT changes and finished off by having all these parts cast to OE quality. What this means for you is serious B58 power made easy; GC’s are a drop-in B58 turbocharger upgrade that supports over 600WHP while maintaining factory spool and all factory connections including oil, water, downpipe, and charge pipe. NOTE: A tune is highly recommended to get the best performance out of this upgrade. Key Design Elements: All new castings with factory restrictions removed. No oversized wheels stuffed into factory housings here! GC is cold side and bearing housing only, GC+ is a complete unit Full 3' turbocharger inlet size with an included 3-4' silicone inlet elbow that removes ALL factory inlet restrictions 9 blade Mar-M 246 turbine wheel with the latest aero technology for increased flow while maximizing spool 9 blade “point-milled” compressor wheels with the latest aero technology to maximize flow while virtually eliminating surge Direct connection to ALL factory lines including oil, water, downpipe, and factory charge pipe Redesigned, and improved internal components including bearing housing oiling, and an upgraded thrust bearing NO CORE CHARGES. The new unit is sold to you outright. Keep your old unit in case you ever want to go back to stock. Or sell it to recoup your investment -it’s up to you! No long lead times; once fully released production units will be on the shelf for same to next day shipping (please inquire about stock levels when ordering) Full 12-month unlimited mileage/No Hassle Warranty. If you have an issue we will replace the unit no questions asked Turbocharger Purchase includes: 1 – VTT B58 “GC” turbocharger 1 – VTT B58 “GC” 3'-4' Silicone inlet elbow with adapters for factory connections 1 – 3' hose clamp for silicone inlet elbow 1 – 4' connector for inlet elbow for use with different intakes (if you are not sure you need this, order it just in case) 1 – Turbo Installation Kit from VTT
Show More Show Less
Burger Motorsports - Corporate Logo
T#:49822554
Part#: BMSB58OCCFCDV
Ships on Oct 26, 2026
$ 139.00 USD
Free Shipping on orders $49 and up
Keep crankcase vapors in check and your intake air clean with the BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit for the Gen2 B58. This upgrade ditches the flimsy factory venting in favor of a precision CNC-machined billet oil filler cap and dual-vent fittings engineered to handle increased crankcase pressure under boost. By diverting oil-laden vapors into a catch can instead of back through the intake, this system helps minimize carbon buildup, reduces oily contamination, and promotes more consistent performance as power levels climb. High-quality hoses and fittings ensure a secure, leak-free install that won’t collapse under pressure and maintains a clean, OE-plus appearance in the engine bay. An easy, effective upgrade for B58 enthusiasts looking for cleaner operation, improved engine longevity, and proven performance-focused design
Show More Show Less

Lisle - Corporate Logo
T#:5498468
Part#: 20300
Ships in 1 Business Day
$ 52.99

This product was last offered at the strikethrough price on
05-07-2026

$ 50.99 USD
Free Shipping on orders $49 and up
$ 50.99 USD
Free Shipping on orders $49 and up
A must have
King - Corporate Logo
T#:26504942
Part#: MB7779SM
In Stock at Vendor
$ 108.99 USD
Free Shipping on orders $49 and up
Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.
Show More Show Less

Kelford Cams - Corporate Logo
T#:25938619
Part#: KEL-HPVSK-B58
Ships in 3 Business Days
$ 699.99 USD
Free Shipping on orders $49 and up
Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm
Show More Show Less

Hazet - Corporate Logo
T#:640838
Part#: 1976
Ships in 1 Business Day
$ 102.99

This product was last offered at the strikethrough price on
05-07-2026

$ 99.99 USD
Free Shipping on orders $49 and up
$ 99.99 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:27838476
Part#: 11317617489KT2
Ships in 1-2 days
$ 681.99 USD
Free Shipping on orders $49 and up

Over time and extensive use, engine timing chains may stretch, raising the risk of significant engine damage. Our kit is designed to proactively address this issue, ensuring your vehicle's continued smooth operation. It features exclusively Genuine BMW parts, guaranteeing top-notch quality and reliability.

Included in the Kit:

Upper Timing Chain Guide Chain Tensioner Upper Timing Chain Oil Pump Timing Chain Lower Timing Chain Tensioner Chain Tensioner Guide Rail Guide Rail Upper Timing Chain Tensioner Guide Top Slide Rail Double Gear Sprocket

Show More Show Less
Genuine BMW - Corporate Logo
T#:14122760
Part#: 11418482270
Ships in 1-2 days
13% off MSRP $ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD
Free Shipping on orders $49 and up


Genuine BMW - Corporate Logo
T#:578395
Part#: 13518631642
Ships in 1-2 days
4% off MSRP $ 1,356.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,296.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 1,356.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,296.99 USD
Free Shipping on orders $49 and up
This is the stock fuel pump found on the B58TU Supra engine. It has increased flow that will support higher horsepower levels without the need for complex fuel system upgrades. Has been tested to support 600+WHP.
Show More Show Less
B58C Timing Tool
For Models With B58C Engine Only
Genuine BMW - Corporate Logo
T#:13990885
Part#: 83302471127
Ships in 1-2 days
$ 498.99 USD
Free Shipping on orders $49 and up
$ 498.99 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:527127
Part#: 11148605104
Ships in 1-2 days
5% off MSRP $ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD
Free Shipping on orders $49 and up

Genuine BMW - Corporate Logo
T#:28570848
Part#: 12138643360KT12
Ships in 1-2 days
$ 669.99 USD
Free Shipping on orders $49 and up
$ 669.99 USD
Free Shipping on orders $49 and up

Sluggish acceleration, misfires, and rusty terminals are symptoms of a worn coil. Located on the top of your engine, these coils should be inspected and replaced as needed or every 60,000 miles.

If you are replacing any aspect of your ignition system, it's best to replace all serviceable components. This kit includes ignition coils and spark plugs for a comprehensive service that is guaranteed to last.

Kit Includes:

6 Genuine BMW Ignition Coils - 12138643360 6 Genuine BMW Spark Plugs - 12122455258 Genuine BMW Spark Plug Service Indicator Label - 01399791390

Show More Show Less

Genuine BMW - Corporate Logo
T#:56724745
Part#: 83195B683D4
Ships in 1-2 days
New Item
3% off MSRP $ 35.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 35.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD
Free Shipping on orders $49 and up
Proper surface preparation is vital when securing engine seals, oil pan gaskets, or plastic components on your BMW. Genuine BMW sourced Loctite 770 Surface Primer, designed to treat low-energy plastic and rubber elastomeric surfaces before applying bonding agents. Using this factory recommended primer ensures engine seals stay firmly positioned during assembly and holds up under rigorous engine bay heat and vibrations.
Show More Show Less
VIM Tools - Corporate Logo
T#:31887579
Part#: MSPM100
Ships in 9 Business Days
$ 166.99 USD
Free Shipping on orders $49 and up

The 12 Piece 3/8" Drive Magnetic Spark Plug Socket Set from VIM Tools is expertly designed for effortless spark plug removal and installation. Each of the 12 magnetic sockets in this set features a satin finish and is equipped with magnetic rings to securely hold the spark plug in place during use.

The sockets are neatly organized in a black and green EVA foam tray with clearly labeled sizes for quick identification.

The set includes a variety of socket types—metric, SAE, 6-point, 12-point, standard length, extra deep, thin wall, universal joint, and dual drive—making it versatile enough for use in a wide range of domestic and imported vehicles.

The spring-loaded universal joint design allows for easy access to spark plugs in tight or confined spaces, while the knurling on the socket body provides extra grip for hand turning. The 12-point 14mm sockets are easily distinguishable by their double knurling, saving you time on the job. Additionally, the dual drive feature lets you use either a 3/8" drive ratchet or a wrench for added flexibility.


Key Features:

  • Magnetic Ring Inserts: Securely hold spark plugs in place for easy removal and installation.
  • Versatile Socket Set: Includes metric, SAE, 6-point, 12-point, standard length, extra deep, thin wall, universal joint, and dual drive sockets.
  • Spring-Loaded Universal Joint: Provides easy access to spark plugs in confined spaces and prevents loosening.
  • Knurled Grip: Single and double knurling on socket bodies for better hand-turning control.
  • Convenient Organization: Sockets are laid in a black and green EVA foam tray with labeled sizes for quick identification.
  • Dual Drive Capability: Allows use with both a 3/8" drive ratchet and a wrench.


Includes:

**Note: All sockets are magnetic and 3/8" Drive**

  • 9/16"
  • 5/8"
  • 14mm
  • 13/16"
  • 16mm Thin Wall 6 Point
  • 14mm Thin Wall 12 Point
  • 9/16" Spring-Loaded UJ
  • 5/8" Spring-Loaded UJ
  • 14mm Spring-Loaded UJ
  • 9/16" Extra Deep 6" OAL
  • 14mm Extra Deep 6" OAL 12 Point
Show More Show Less

Genuine BMW - Corporate Logo
T#:50830147
Part#: 83195B77F71
In Stock
5% off MSRP $ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD
Free Shipping on orders $49 and up

Precision Raceworks - Corporate Logo
T#:31059467
Part#: 201-0396-BLU
Ships in 6 Business Days
$ 59.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks Billet Engine Oil Cap is a functional and stunningly stylish way to add a nice touch to any engine bay! Many people don't realize it but the OEM caps have a pressure release valve built into them. Precision Raceworks has designed their engine oil cap in a way that allows the re-use of the pressure release valve from your stock oil cap. These caps offer superior style and performance-grade components that guarantee a reliable fit every time. Durable billet aluminum construction provides long-lasting protection and dependability that will upgrade your engine bay for years to come.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38161705
Part#: 101-0258
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up

The Replacement Fuel Filter Element - Dual Open 6 Micron | Precision Raceworks is designed for high-performance fuel systems, providing efficient filtration to protect vital components in your BMW. With a 6-micron filtration capability, this element ensures that harmful debris and contaminants are removed, safeguarding fuel pumps, injectors, and other critical parts from damage. Whether you're racing or daily driving, this filter helps maintain optimal fuel flow, ensuring consistent engine performance under all conditions.

This dual open design fits seamlessly into Precision Raceworks inline fuel filters, offering reliable and efficient performance for both street and track applications. Easy to replace and designed for maximum protection, this filter element helps keep your fuel system in top condition, ensuring long-lasting performance and reliability.

  • 6-micron filtration – Effectively removes harmful contaminants, improving fuel system longevity
  • Dual open design – Provides balanced flow and efficient filtration for superior fuel system protection
  • Precision-engineered – Custom fit for Precision Raceworks inline fuel filters, ensuring easy installation
  • Durable construction – Built with high-quality materials to withstand demanding driving conditions
  • Protects critical components – Safeguards fuel pumps, injectors, and more from debris and impurities
  • Simple maintenance – Quick and easy to replace, ensuring your system performs at its best
  • Versatile usage – Suitable for both high-performance racing and daily driving

Fuel Filter Replacement Guidelines:

  • Racing applications: Inspect twice per season and replace as needed to maintain peak performance
  • Daily driving: Inspect at least once per year or every 6,000 miles for preventative maintenance

The Replacement Fuel Filter Element - Dual Open 6 Micron | Precision Raceworks is an essential upgrade to keep your BMW’s fuel system running smoothly and protected from contaminants.

Show More Show Less
NOCO - Corporate Logo
T#:641121
Part#: GBC010
Ships in 8 Business Days
24% off MSRP $ 32.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.94 USD
Free Shipping on orders $49 and up
24% off MSRP
$ 32.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.94 USD
Free Shipping on orders $49 and up

The NOCO GBC010 12V Accessory Kit is designed to connect directly to the XGC IN and OUT ports of NOCO Boost jump starters. This kit allows you to effortlessly power your preferred 12-volt devices directly from a GB70, GB150, GB250+, GB251+, or GB500+, such as a tire inflator, vacuum, coffee maker, fan, cooler, and more. Constructed from high-conductivity 16AWG 100% copper wire, it boasts a rated capacity of 15 amperes.


Features: 

  • Recharge NOCO Boost UltraSafe Lithium Jump Starters from a vehicles 12-volt power source.
  • Compatible with NOCO Boost UltraSafe Lithium Jump Starter models GB70, GB150 GB250+, GB251+ and GB500+.
  • Power 12-volt device like a tire inflator, vacuum and more.
  • High-conductivity 16 AWG copper wire and rated capacity of 15-amperes.
  • Molded strain reliefs prevent unwanted strain on the XGC wire connections.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
NOCO - Corporate Logo
T#:855031
Part#: GENPRO10X2
Ships in 8 Business Days
21% off MSRP $ 284.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.99 USD
Free Shipping on orders $49 and up
21% off MSRP
$ 284.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.99 USD
Free Shipping on orders $49 and up

The GENPRO10X2 is an upgraded version of our GEN2 with enhanced features. This model is 19% smaller yet delivers 33% more power, making it one of the most high-performing onboard marine battery chargers NOCO has ever produced. It's a two-bank onboard battery charger with a 20-amp rating (10 amps per bank) designed for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. You can independently charge and control each battery bank using selectable charging modes such as 12V, 12V AGM, 12V Lithium, and 12V Repair Mode, suitable for all types of lead-acid and lithium-ion batteries.


Features: 

  • A two-bank on-board battery charger rated at 20-amps for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries.
  • Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid batteries.
  • An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
  • Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts.
  • Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.
  • It's not just a trickle charger; it's an advanced battery maintainer. A fully automatic, worry-free battery charger for everyday use - 24/7 - with zero overcharge.
  • A simplified mounting system allows for quick and easy installations in any direction - even up-side-down - with an integrated anti-vibration backing to isolate shock, vibration, and noise.
  • A fully-sealed and waterproof onboard battery charger with an ingress protection rating of IP68, but has survived brutal life cycle testing, including thousands of hours underwater.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less


Precision Raceworks - Corporate Logo
T#:38161697
Part#: 622-0290-BLK
Ships in 9 Business Days
$ 269.99 USD
Free Shipping on orders $49 and up

BMW B58 / S58 Black Billet Engine Fluid Cap Set is a premium upgrade designed to enhance both the performance and aesthetics of your BMW’s engine bay. Crafted from high-quality billet aluminum, this cap set provides superior durability while replacing the factory plastic caps for a sleek, high-end look.

Engineered to maintain full OEM functionality, these caps integrate the original pressure relief valves, ensuring proper system operation. The deep black anodized finish adds a bold and aggressive appearance while offering excellent resistance to heat and corrosion.

  • Precision-machined billet aluminum – Stronger and more durable than factory plastic caps
  • OEM pressure relief compatibility – Ensures safe and reliable system performance
  • Sleek black anodized finish – Adds a high-performance look to your engine bay
  • Heat and corrosion-resistant – Built to withstand extreme conditions for long-lasting reliability
  • Direct replacement design – Fully replaces factory caps for a seamless fit
  • Simple installation – Requires swapping OEM pressure relief valves for full functionality

Upgrade your BMW’s engine bay with the BMW B58 / S58 Black Billet Engine Fluid Cap Set, combining premium style with high-performance reliability.

Show More Show Less
Precision Raceworks - Corporate Logo
T#:38094344
Part#: 201-0177
Ships in 9 Business Days
$ 29.99 USD
Free Shipping on orders $49 and up
Perfect for upgrading or modifying your fuel delivery system, it offers effortless installation and long-lasting reliability in performance-driven builds
Precision Raceworks - Corporate Logo
T#:38161696
Part#: 622-0290-SIL
In Stock
$ 269.99 USD
Free Shipping on orders $49 and up

BMW B58 / S58 Silver Billet Engine Fluid Cap Set is a high-quality upgrade that replaces the factory plastic caps with durable billet aluminum for enhanced strength and a sleek, premium appearance. Designed for a perfect fit, this cap set enhances both the aesthetics and functionality of your BMW’s engine bay.

Unlike adhesive overlays or plastic replacements, these billet aluminum caps completely replace the OEM components while retaining essential pressure relief functionality. The precision-machined silver finish offers a refined look while providing superior resistance to heat, corrosion, and wear.

  • Direct replacement – Replaces OEM caps entirely for a factory-like fit
  • Sleek silver finish – Provides a clean, high-end appearance
  • Billet aluminum construction – Offers long-lasting durability and strength
  • OEM pressure relief compatibility – Maintains proper system function
  • Heat and corrosion-resistant – Engineered to withstand extreme conditions
  • Easy installation – Requires transferring OEM pressure relief valves for full functionality

Upgrade your BMW’s engine bay with the BMW B58 / S58 Silver Billet Engine Fluid Cap Set, the perfect blend of style and performance for enthusiasts who demand the best.

Show More Show Less

ARP - Corporate Logo
T#:54104145
Part#: 201-2501
Ships on Nov 12, 2026
New Item
8% off MSRP $ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD
Free Shipping on orders $49 and up
Secure your timing, protect your investment, and push your B58 to the limit with the reliability of ARP.

ATI Performance Products - Corporate Logo
T#:27605443
Part#: ATI-HPCD-B58
Ships on Oct 26, 2026
$ 389.99 USD
Free Shipping on orders $49 and up

Understanding the criticality of harmonic resonance in BMW inline-6 engines, ATI Performance Products has collaborated with VAC Motorsports to craft revolutionary dampers. Designed for BMW 2.5L, 2.8L, 3.0L, and 3.2L straight-6 engines in E36 and E46 M3, E9X, E6X, Z3s, and Z4s, these dampers tackle harmonic vibrations, unlocking heightened horsepower, torque, and longevity. Forget about broken oil pumps and timing chains!

Pairing seamlessly with VAC accessory pulleys, these 7" diameter dampers boast OEM-style timing alignment tabs, ensuring a direct fit over OEM balancers. Notably, all ATI Super Dampers exceed SFI 18.1 Safety Certification for competitive use, making them a must-have for BMW enthusiasts. Benefits extend to eliminating vibration issues with lightweight clutch and flywheel assemblies, reducing wear on bearings, engine accessories, and oil pumps, and harmonizing with underdrive pulleys.

Plus, each package includes the lightweight VAC Billet Crankshaft Pulley, proudly made in the USA for uncompromised quality assurance.

Show More Show Less
Powerflex Black Series - Corporate Logo
T#:15280258
Part#: PFF5-5452BLK
Ships on Oct 26, 2026
$ 97.99 USD
Free Shipping on orders $49 and up
PFF5-5452 Race Engine Mount Insert is a two-piece kit made using our Black 95A durometer material, designed to fill the void of the OE rubber mount to limit drivetrain movement and sharpen throttle response on standard or mildly tuned vehicles. Mount rigidity is increased by 100%. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Fits in OEM Part Number: 22116860465 & 22116860466
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38161737
Part#: 201-0406
Ships on Nov 2, 2026
$ 24.99 USD
Free Shipping on orders $49 and up
This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor
Spool Performance - Corporate Logo
T#:31291063
Part#: SP-B58-FX350-NEY
Special Order: No Guaranteed ETA
$ 2,348.00 USD
Free Shipping on orders $49 and up
The FX-350 is truly Plug and Play for all platforms we are offering and comes with all the lines and hardware needed for a clean easy install.

MMX Performance - Corporate Logo
T#:29035359
Part#: MMR17-1502
Special Order: No Guaranteed ETA
$ 81.99 USD
Free Shipping on orders $49 and up
Get rid of the notorious B58 oil filter disintegration problem forevermore with the MMR Performance Oil Filter. By replacing the factory paper filter element with MMR’s advanced high-flow, high-filtration stainless steel filter unit, you will protect your engine from the big bills (and potentially worse) caused by the OE filter’s collapse failure. The oil filters on BMW’s B58 & B57 3.0 6-cylinder engines (both petrol and diesel) suffer from a well-documented quality problem with the factory paper-element oil filter. At service time, when removal of the filter is attempted, the bottom section frequently breaks away from the disintegrated filtration material. This leaves the broken base stuck in the oil filter housing and an expensive removal/replacement job to extract the remains and fit a new housing. Such is the problem that there’s even an official BMW technical bulletin to warn their dealers of this. The MMR replacement Oil Filter is a pretty special replacement filter. It fixes this annoying problem once and for all. The MMR Oil Filter element is made from a pleated high-flow stainless steel micronic filter cloth – a medical-grade material guaranteed to filter out oil contamination right down to 20 Microns, ensuring far better protection than paper-based filters can achieve. As well as this exceptional filtration, the filter material allows for five times the flow of comparable paper oil filters. Its design provides consistent filtering across entire filter surface. The failure of the factory oil filter generally just leads to a large bill to extract the damaged remnants. However, more worryingly, it has occasionally been known to lead to broken pieces of filter media running through the small oilways and orifices of the engine’s lubrication system, risking blocking the oil running round the bearings and VANOS system and causing much greater mechanical damage before it is caught. The MMR Oil Filter is a reusable unit which can be used over and over again. As long as it is thoroughly cleaned at each oil change, it will last the lifetime of the vehicle and keep on protecting the engine just as it did when new. However, proper cleaning is not necessarily a DIY job, as it requires the use of a suitable solvent to break down the old oil, and cleaning from the inside out with compressed air to remove any risk of debris remaining. If you have any doubts about this, we recommend as best-practice to change filter with every oil-change. The MMR Oil Filter is a lifetime reusable filter. But to resuse and avoid any future loss of filtration or oil flow, it is essential that it is thoroughly cleaned at each oil change as follows: Remove MMR Oil Filter from filter housing Remove 3x O-Rings from MMR Oil Filter prior to Step 3, as fuel will degrade and cause damage to these rubber/Viton components. Soak the filter one of the following fluids for 5-10 minutes – Petrol/Gasoline or Carb Cleaner or Soap and Water Agitate/stir every few minutes until the outer surface is free of any engine debris Dry the filter using compressed air, blow air through the filter, (do not press the compressed air gun against the filter, keep at least a 10mm gap from nozzle to filter) starting from the inside out, then at an angle on the outside of the screen to further remove any remaining particles or cleaning solution. Once dry, reinstall O-Rings (MMR advices replacement of these O-Rings every oil service - See ES4810064) and refit into oil filter housing and engine. If you have any doubt about your ability to perform this sequence, we recommend replacing the filter element with each oil change.
Show More Show Less

Beru - Corporate Logo
T#:14982199
Part#: 121200405516KT
Back Ordered
$ 95.99 USD
Free Shipping on orders $49 and up
$ 95.99 USD
Free Shipping on orders $49 and up
Rein Engine Oil Filter Housing Cap CPL0070
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:34181283
Part#: 11427926064
In Stock
$ 25.99 USD
Free Shipping on orders $49 and up

The Engine Oil Filter Housing Cap CPL0070 is a vital component for BMW vehicles, designed to provide a secure and effective seal for the engine oil filter housing. This high-quality cap is essential for maintaining optimal engine performance by preventing oil leaks and ensuring proper oil pressure. Perfect for both professional mechanics and DIY enthusiasts, the Engine Oil Filter Housing Cap CPL0070 is an indispensable part of routine maintenance for BMW owners focused on vehicle longevity.

Crafted from durable materials, this oil filter housing cap is engineered to withstand the demanding conditions typical of BMW engines. Its precise design guarantees an excellent fit, allowing for easy installation and straightforward replacements. Available from Turner Motorsport, this product is a reliable choice for those looking to enhance their engine’s performance.

Key Benefits:

  • Specifically designed for BMW vehicles to ensure compatibility and a perfect fit
  • Prevents oil leaks, helping maintain optimal oil pressure for engine health
  • Made from high-quality materials for enhanced durability and longevity
  • Easy installation process allows for quick maintenance and replacements
  • Ideal for both professional mechanics and DIY car enthusiasts
  • Available from Turner Motorsport, a trusted supplier of BMW parts

The Engine Oil Filter Housing Cap CPL0070 is an essential upgrade for any BMW owner aiming to protect their engine and ensure it runs smoothly.

Show More Show Less
CP Carrillo - Corporate Logo
T#:40478118
Part#: CAR-CRS-B58-XT
Back Ordered
$ 2,299.99 USD
Free Shipping on orders $49 and up
Ensure your engine can handle the power and all the boost thrown at it with these 5150 AutoSport Pro-Xtreme connecting rods manufactured by CP Carrillo. These rods are precision-engineered for high horsepower and high RPM applications, ensuring superior durability for turbocharged builds, drag racing, or street/strip use.
Show More Show Less


Universal Piston Ring Compressor
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:25805755
Part#: 3592SCH01A
In Stock
Sale - Save 23% $ 20.99

This product was last offered at the strikethrough price on
04-26-2026

$ 16.14 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 20.99

This product was last offered at the strikethrough price on
04-26-2026

$ 16.14 USD
Free Shipping on orders $49 and up

The Schwaben Universal Piston Ring Compressor is a must-have tool for easily and precisely compressing piston rings.

Standing 4 inches high, this compressor features two spring steel bands that provide evenly distributed pressure across all piston rings, accommodating pistons ranging from 60 mm to 175 mm in diameter. Designed for use on all passenger vehicles, this tool ensures efficient and reliable compression.

**Note** For the Schwaben Piston Ring Filer, check out T25805754!


Key Features:

  • Versatile Capacity: Handles most pistons from 60 mm to 175 mm in diameter.
  • Even Pressure Distribution: Two spring steel bands equally distribute tension for easy and effective compression.
  • Durable Construction: Made from sheet steel for long-lasting performance.
  • User-Friendly: Features an easy thumb release locking mechanism for quick and secure operation.
  • Universal Application: Suitable for use on all passenger vehicles.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Genuine BMW - Corporate Logo
T#:28583
Part#: 07119963132
In Stock
2% off MSRP $ 2.42

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.37 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 2.42

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.37 USD
Free Shipping on orders $49 and up


Genuine BMW Gasket Ring
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6,F01,F02,F10,F12,F13,F15,F80 M3,F82 M4,F83,i12


Genuine BMW - Corporate Logo
T#:78250
Part#: 51127070202
In Stock
$ 1.99 USD
Free Shipping on orders $49 and up


Genuine BMW Clip Nut - M6-Zns3
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E39 M5,E60 M5,E63 M6,E46 M3,E70 X5M,E71 X6M,E82 1M Coupe,E85 Z4M,E53 48IS,E30,E34,E36,E38,E39,E46,E53 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i12

Show More Show Less

Mini Screw Clamp
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:367185
Part#: 21014
In Stock
Sale - Save 26% $ 3.99

This product was last offered at the strikethrough price on
05-02-2026

$ 2.96 USD
Free Shipping on orders $49 and up
Sale - Save 26%
$ 3.99

This product was last offered at the strikethrough price on
05-02-2026

$ 2.96 USD
Free Shipping on orders $49 and up
Ideal for low pressure hoses. This hose clamp could be used on many vehicles for many different purposes.
CTA Tools - Corporate Logo
T#:641668
Part#: CTA2554
In Stock
$ 8.55

This product was last offered at the strikethrough price on
08-23-2026

$ 7.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 8.55

This product was last offered at the strikethrough price on
08-23-2026

$ 7.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
High quality steel blades with 4 different patterns for removal & installation of O-Rings, Oil Seals & more

77-85mm - 3/4" Band Hose Clamp
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:377877
Part#: 003402ECS07A-05
In Stock
Sale - Save 25% $ 25.99

This product was last offered at the strikethrough price on
06-13-2026

$ 19.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 25.99

This product was last offered at the strikethrough price on
06-13-2026

$ 19.49 USD
Free Shipping on orders $49 and up

Upgrade your BMW's hose clamps with the 77-85mm - 3/4" Band Hose Clamp from Turner Motorsport. These full 304 stainless steel clamps offer convenience and quality without the dealership price tag. German-style T-bolts allow for easy adjustment to your required diameter, ensuring a secure fit every time.

  • Made of durable 304 stainless steel for long-lasting performance
  • German-style T-bolt design for easy size adjustment
  • Convenient band widths for versatile applications
  • Quality alternative to dealership pricing
Show More Show Less
LK-2M 2 Pin Connector Package
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:40072446
Part#: LK2M
In Stock
Sale - Save 29% $ 6.99

This product was last offered at the strikethrough price on
06-14-2026

$ 4.94 USD
Free Shipping on orders $49 and up
Sale - Save 29%
$ 6.99

This product was last offered at the strikethrough price on
06-14-2026

$ 4.94 USD
Free Shipping on orders $49 and up

Includes connector housing with terminals and seals. Commonly used for the engine oil pressure switch.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Show More Show Less

Genuine BMW - Corporate Logo
T#:6377
Part#: 07119901299
In Stock
$ 2.99 USD
Free Shipping on orders $49 and up
GENUINE BMW HEX HEAD SCREW 07119901299

Febi Oil Filter - Priced Each - B58 3.0L
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:17605194
Part#: 11427826799
In Stock
$ 10.50

This product was last offered at the strikethrough price on
09-18-2026

$ 10.49 USD
Free Shipping on orders $49 and up
$ 10.49 USD
Free Shipping on orders $49 and up
Febi has a comprehensive range of oil filters that are OE-matching quality. The best possible filtration performance always guarantees optimal engine operation. If you are changing your filter, check ECS Tuning's website for high-quality replacement lubricants. Pick up ECS Tuning's own magnetic drain plug trap and capture shavings before they make it through your engine and to the filter.
Show More Show Less
Performance Work Gloves - Large
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:32284515
Part#: 3422SCH02A
In Stock
Sale - Save 25% $ 16.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 16.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.74 USD
Free Shipping on orders $49 and up

Schwaben Professional Mechanic's Work Gloves provide exceptional hand protection with a perfect balance of durability and comfort.

Designed for precision, these gloves offer high dexterity, making it easy to handle even the smallest parts. The tailored elastic cuff with a hook-and-loop closure ensures a secure and comfortable fit.

The textured latex coating on the palm and fingertips delivers superior grip and tactile feedback, while the breathable spandex backing and knit top allow for all-day comfort.

The durable synthetic leather palm enhances longevity, and the unique graphic design reflects the drifting culture of Euro car enthusiasts.

Note: See manufacturers information tab for sizing chart.


Key Features:

  • High Dexterity: Perfect for picking up small parts with ease.
  • Secure Fit: Tailored elastic cuff with a hook-and-loop closure.
  • Enhanced Grip: Textured latex coating on palm and fingertips.
  • All-Day Comfort: Breathable spandex backing and knit top.
  • Durable Design: Synthetic leather palm for extended wear.
  • Unique Style: Graphic design inspired by the drifting culture of Euro owners.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Hella - Corporate Logo
T#:592716
Part#: 7424011
In Stock
$ 17.99 USD
Free Shipping on orders $49 and up

Upgrade the sound of your BMW or MINI with the Hella Horn - High-Tone. This high-quality horn delivers a powerful and attention-grabbing sound, enhancing safety on the road. Designed for easy installation, it provides a quick and effective way to improve the audible presence of your vehicle.

  • Powerful and attention-grabbing sound
  • Enhances safety on the road
  • Easy installation for convenience
  • Compatible with BMW and MINI models
  • High-quality construction for durability

Enhance the audible presence of your BMW or MINI with the Hella Horn - High-Tone, ensuring you're heard when it matters most.

Show More Show Less


Schwaben Black Mechanics Gloves - Large
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:366782
Part#: 010337SCH02A
In Stock
Sale - Save 25% $ 22.99

This product was last offered at the strikethrough price on
05-02-2026

$ 17.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 22.99

This product was last offered at the strikethrough price on
05-02-2026

$ 17.24 USD
Free Shipping on orders $49 and up

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

  • High dexterity
  • Elastic hook and loop strap
  • Textured latex finger tips for grip
  • Breathable material
Show More Show Less
Fischer and Plath Gasket Ring
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:362383
Part#: 07119963201
In Stock
$ 0.82 USD
Free Shipping on orders $49 and up
A14x18-CU