BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW A90 MKV Supra B58 3.0L

Performance Valved Cat-Back Exhaust - Black Tips - A90 GR Supra 3.0L ...

Call In Or Chat For Best Price!

T#:19395571

Part#: D660-0096-BLK

Ships on Sep 17, 2026

11% off MSRP $ 1,968.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,749.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,968.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,749.99 USD

Add to Wish List

Evoke passion and excitement with the Dinan Valved exhausts for the GR Supra! Conveying the sweet sounds of a deep, rich, euphonious note that are unmistakably Dinan in addition to retaining the flexibility of valves, Dinan exhausts are the epitome of sound without sacrifice. Utilizing factory cut points and mounting mechanics, the Dinan exhaust system is a straightforward install with precision fitment just like you would expect straight from the manufacturer. Mounting and proper fitment is where the similarities to the factory exhaust end, however. Fabricated from brushed 100% T304 stainless steel, TIG welded and free of hydroformed pipe, the upgraded system is a marked improvement from its predecessor - both in terms of material/construction as well as in overall looks. For weight savings and simplicity, the stock single to dual pipe setup has been abandoned in favor of an enlarged, free flowing single pipe system. This pathway feeds into a muffler that limits frequencies associated with drone, as well as assists in altering the overall tone of the setup to deliver the signature low Dinan rumble. The no-nonsense design allows shocking versatility in sound levels when paired with features, like valves, often associated with more fanciful alternatives. The unabashedly spartan, yet effective, pipe layout forces gasses to escape from the rear out of massive dual, straight cut, 114.3 mm (4.5-inch) exhaust tips emblazoned with the laser engraved Dinan logo. The tip branding further cementing any lingering doubt that the system visible is something above and beyond stock-- if it was not already apparent by the blissful music permeating from them. Unquestionable enhancements to the overall chorus emitted through the Dinan system transcend all modes making the vehicle a delight to drive and enjoy. However, for those that wish to have options to limit the extraordinary soundtrack for late night or early morning arrivals/departures (or any number of other reasons) factory valve control is retained. This effectively makes the system behave similarly to a straight-pipe system that promotes maximum flow and volume when the valve is open and emit more subdued resonant vocals when the valve is closed, and exhaust gases are wholly redirected through the muffler. It is the perfect blend of civility when not pushing the car or the full spectrum of auditory delight when in it. No matter the situation, the Dinan valved cat-back exhaust system is the answer for the discerning enthusiast looking for sound without sacrifice. Features: Maximum gains of +6 HP and +5 ft-lb of torque Enjoyably louder, sportier sound Drone abatement technologies used to reduce cabin resonance Dual 4.5-inch (114.3mm) double-walled, black ceramic coated clamp-on tips with laser engraved Dinan logo Larger diameter piping for increased flow (83mm throughout primary run vs. 80mm at largest point) Factory resonator/collector removed for increased volume 10-pounds lighter than the stock system (Stock: 56-pounds vs. Dinan: 46-pounds) 100% 304 Stainless Steel construction Retains factory valve control Factory-like fitment with included mounting hardware

Show More Show Less

A90 Supra Experience Package

Call In Or Chat For Best Price!

T#:30197980

Part#: A90-SUPRA-E-B

Ships on Sep 9, 2026

$ 2,467.99 USD

Add to Wish List

Qty

$ 2,467.99 USD

Add to Wish List

Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go-to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power adders, the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience. Includes Dinan Exhaust Dinan Intake Dinan Turbo Inlet Strut Braces Throttle Booster Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +13 HP and +14 lb-ft of torque (Exhaust +Intake) Smoother, louder and sportier sound (Exhaust + Intake + Turbo Inlet) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonator between the catalyst and rear muffler for increased volume (Exhaust) 10 pounds lighter than the stock for an improved power-to-weight ratio (Exhaust) Reduced intake restriction for greater flow that allows increased turbo efficiency and greater power potential on modified builds (Intake + Turbo Inlet) Improved throttle response (Intake + Turbo Inlet) Increased chassis rigidity with decreased flex during cornering for improved handling and performance (Strut Braces) Customizable throttle mapping for enhances feel and acceleration (Throttle Booster) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge Includes Dinan Exhaust Dinan Intake Dinan Turbo Inlet Strut Braces Throttle Booster Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +13 HP and +14 lb-ft of torque (Exhaust +Intake) Smoother, louder and sportier sound (Exhaust + Intake + Turbo Inlet) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonator between the catalyst and rear muffler for increased volume (Exhaust) 10 pounds lighter than the stock for an improved power-to-weight ratio (Exhaust) Reduced intake restriction for greater flow that allows increased turbo efficiency and greater power potential on modified builds (Intake + Turbo Inlet) Improved throttle response (Intake + Turbo Inlet) Increased chassis rigidity with decreased flex during cornering for improved handling and performance (Strut Braces) Customizable throttle mapping for enhances feel and acceleration (Throttle Booster) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge

Show More Show Less

Performance Valved Cat-Back Exhaust - Polished Tips - A90 GR Supra 3....

Call In Or Chat For Best Price!

T#:21045524

Part#: D660-0096

Ships on Sep 17, 2026

11% off MSRP $ 1,968.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,749.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,968.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,749.99 USD

Add to Wish List

Evoke passion and excitement with the Dinan Valved exhausts for the GR Supra! Conveying the sweet sounds of a deep, rich, euphonious note that are unmistakably Dinan in addition to retaining the flexibility of valves, Dinan exhausts are the epitome of sound without sacrifice. Utilizing factory cut points and mounting mechanics, the Dinan exhaust system is a straightforward install with precision fitment just like you would expect straight from the manufacturer. Mounting and proper fitment is where the similarities to the factory exhaust end, however. Fabricated from brushed 100% T304 stainless steel, TIG welded and free of hydroformed pipe, the upgraded system is a marked improvement from its predecessor - both in terms of material/construction as well as in overall looks. For weight savings and simplicity, the stock single to dual pipe setup has been abandoned in favor of an enlarged, free flowing single pipe system. This pathway feeds into a muffler that limits frequencies associated with drone, as well as assists in altering the overall tone of the setup to deliver the signature low Dinan rumble. The no-nonsense design allows shocking versatility in sound levels when paired with features, like valves, often associated with more fanciful alternatives. The unabashedly spartan, yet effective, pipe layout forces gasses to escape from the rear out of massive dual, straight cut, 114.3 mm (4.5-inch) exhaust tips emblazoned with the laser engraved Dinan logo. The tip branding further cementing any lingering doubt that the system visible is something above and beyond stock-- if it was not already apparent by the blissful music permeating from them. Unquestionable enhancements to the overall chorus emitted through the Dinan system transcend all modes making the vehicle a delight to drive and enjoy. However, for those that wish to have options to limit the extraordinary soundtrack for late night or early morning arrivals/departures (or any number of other reasons) factory valve control is retained. This effectively makes the system behave similarly to a straight-pipe system that promotes maximum flow and volume when the valve is open and emit more subdued resonant vocals when the valve is closed, and exhaust gases are wholly redirected through the muffler. It is the perfect blend of civility when not pushing the car or the full spectrum of auditory delight when in it. No matter the situation, the Dinan valved cat-back exhaust system is the answer for the discerning enthusiast looking for sound without sacrifice. Features: Maximum gains of +6 HP and +5 ft-lb of torque Enjoyably louder, sportier sound Drone abatement technologies used to reduce cabin resonance Dual 4.5-inch (114.3mm) double-walled, polished clamp-on tips with laser engraved Dinan logo Larger diameter piping for increased flow (83mm throughout primary run vs. 80mm at largest point) Factory resonator/collector removed for increased volume 10-pounds lighter than the stock system (Stock: 56-pounds vs. Dinan: 46-pounds) 100% 304 Stainless Steel construction Retains factory valve control Factory-like fitment with included mounting hardware

Show More Show Less

Universal Stainless Steel Straight Pipe - 2.5" OD - 24" Length ...

T#:587358

Part#: TMS24SPKT

In Stock

Sale - Save 25% $ 42.99

This product was last offered at the strikethrough price on
06-14-2026

$ 32.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 42.99

This product was last offered at the strikethrough price on
06-14-2026

$ 32.24 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 2.50" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability Overall Length (OAL) is approximately 24.00"

Show More Show Less

Prosport Titanium Exhaust Wrap - 2" x 50

T#:385019

Part#: HEA-WRAPKIT-50

Ships on Sep 11, 2026

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!

Show More Show Less

Titanium Exhaust Wrap - 2" X 25'

T#:385025

Part#: HEA-WRAPKIT-25

Ships in 1 Business Day

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!

Key Features:

2" wide x 1/16" thick
Durable, tightly woven, 100% fiberglass
Reduce under hood temperatures
Protect other engine components
Protect your hands/arms from burns
Each roll comes with 5 FREE, 14" long stainless steel zip ties

Show More Show Less

Prosport Gold Heat Reflective Tape - 2" x 15'

T#:385020

Part#: HEA-GWRAP-15

Back Ordered

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Constructed of laminated light-weight glass cloth, this gold reflective heat tape is designed to reflect 80% of radiant heat. With excellent pliability, this tape is easy to install. It's as simple as peel and stick.

Show More Show Less

Universal Stainless Steel 90 Degree Pipe - 3.0" OD

T#:587361

Part#: TMS3090PKT

In Stock

Sale - Save 10% $ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 36.89 USD

Add to Wish List

Qty

Sale - Save 10%

$ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 36.89 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 3.0" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability Minimum Leg Length - 8.25" Bend Radius - 4.75" @ 90° angle

Show More Show Less

Universal Exhaust Pipe Reducer - 3" OD To 60mm ID

T#:587351

Part#: TMS3060ER2KT

In Stock

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Connect your differently sized exhaust pipes quick and easy with this T304 stainless steel exhaust pipe reducer. PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features a raw finish 3.0" OD (Butt) To 60mm ID (slip) connections 1.5mm (.060") wall thickness tubing for durability Length on 60mm ID side - 2.25" Length on 3.0" OD side - 3.50"

Show More Show Less

Stainless Steel V-Band Clamp - 3.0"

T#:587341

Part#: TMS30VBKT

In Stock

Sale - Save 60% $ 54.99

This product was last offered at the strikethrough price on
06-14-2026

$ 21.99 USD

Add to Wish List

Qty

Sale - Save 60%

$ 54.99

This product was last offered at the strikethrough price on
06-14-2026

$ 21.99 USD

Add to Wish List

Ensure you are building your custom exhaust system with only the best! This V-Band Clamp is made completely of T304 stainless steel for high strength and corrosion resistance and comes with zinc-coated hardware. PART DESIGN Weld Rings are made from T304 Stainless Steel for corrosion resistance Weld Rings are 3.0" inside diameter (ID) to slip over a 3.0" OD tube Weld Rings feature a unique "centering ring" on the ID to aid in the alignment of assembly V-Band clamp is T304 Stainless Steel Securing hardware is Zinc-coated steel with high-temp poly. lock nut INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.

Show More Show Less

Stainless Steel V-Band Clamp - 2.5"

T#:587344

Part#: TMS25VBKT

In Stock

Sale - Save 25% $ 49.99

This product was last offered at the strikethrough price on
06-14-2026

$ 37.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 49.99

This product was last offered at the strikethrough price on
06-14-2026

$ 37.49 USD

Add to Wish List

Ensure you are building your custom exhaust system with only the best! This V-Band Clamp is made completely of T304 stainless steel for high strength and corrosion resistance and comes with zinc-coated hardware. PART DESIGN Weld Rings are made from T304 Stainless Steel for corrosion resistance Weld Rings are 2.5" inside diameter (ID) to slip over a 2.5" OD tube Weld Rings feature a unique "centering ring" on the ID to aid in the alignment of assembly V-Band clamp is T304 Stainless Steel Securing hardware is Zinc-coated steel with high-temp poly. lock nut INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.

Show More Show Less

Universal Stainless Steel J-Pipe - 2.5" OD

T#:587362

Part#: TMS25JPKT

In Stock

Sale - Save 5% $ 46.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.64 USD

Add to Wish List

Qty

Sale - Save 5%

$ 46.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.64 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 2.5" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability U-Bend Centerline Radius - 3.50" @ 180° angle Leg Length "A" - 5.0" Leg Length "B" - 5.50" Leg Length "C" - 7.0"

Show More Show Less

Universal Exhaust Pipe Reducer - 3" ID To 60mm OD

T#:587350

Part#: TMS3060ER1KT

In Stock

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Connect your differently sized exhaust pipes quick and easy with this T304 stainless steel exhaust pipe reducer. PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features a raw finish 3.0" ID (Slip) To 60mm OD (Butt) connections 1.5mm (.060") wall thickness tubing for durability Length on 60mm OD side - 2.25" Length on 3.0" ID side - 3.50"

Show More Show Less

Universal Stainless Steel Straight Pipe - 3.0" OD - 24" Length ...

T#:587359

Part#: TMS30SPKT

Ships on Mar 22, 2027

Sale - Save 25% $ 47.99

This product was last offered at the strikethrough price on
06-14-2026

$ 35.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 47.99

This product was last offered at the strikethrough price on
06-14-2026

$ 35.99 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 3.0" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability Overall Length (OAL) is approximately 24.00"

Show More Show Less

Universal Stainless Steel J-Pipe - 3.0" OD

T#:587363

Part#: TMS30JPKT

Ships on Mar 22, 2027

Sale - Save 5% $ 53.99

This product was last offered at the strikethrough price on
05-03-2026

$ 51.29 USD

Add to Wish List

Qty

Sale - Save 5%

$ 53.99

This product was last offered at the strikethrough price on
05-03-2026

$ 51.29 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 3.0" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability U-Bend Centerline Radius - 5.0" @ 180° angle Leg Length "A" - 5.0" Leg Length "B" - 9.50" Leg Length "C" - 10.5"

Show More Show Less

Universal Exhaust Pipe Reducer - 3" ID To 65mm OD

T#:587349

Part#: TMS3065ERKT

In Stock

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Connect your differently sized exhaust pipes quick and easy with this T304 stainless steel exhaust pipe reducer. PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features a raw finish 3.0" ID (Slip fit) X 65mm OD (Butt) connections 1.5mm (.060") wall thickness tubing for durability Length on 65mm OD side - 2.25" Length on 3.0" ID side - 3.50"

Show More Show Less

Dinan Heavy Duty Exhaust Band Clamp - 2.75" (70mm)

Call In Or Chat For Best Price!

T#:38688901

Part#: D662-9228

In Stock

8% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Qty

8% off MSRP

$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Perfect for the do-it-yourself customer looking for a band clamp that allows for a 360º pressure connection, this clamp fits the build. Created from stainless steel, the clamp allows for connecting to 70mm (2.75") via a swedged pipe, and provides even clamping pressure and seal around the entire pipe. This makes for a simple install, or a quick removal should the need arise.

Show More Show Less

Prosport Fiberglass Exhaust Wrap - Black - 2" x 50'

T#:385018

Part#: HEA-WRAPKIT-BLK

Ships in 10 Business Days

$ 28.00 USD

Add to Wish List

Qty

$ 28.00 USD

Add to Wish List

Constructed of durable, tight-woven fiberglass, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility.

Show More Show Less

Akrapovic Titanium Slip-On Exhaust - A90 Supra

T#:588005

Part#: AKRS-TY/T/1H

Ships in 3 Business Days

$ 4,604.99

This product was last offered at the strikethrough price on
06-18-2026

$ 4,374.99 USD

Add to Wish List

Qty

$ 4,374.99 USD

Add to Wish List

An Axle-back slip-on system made from titanium for reduced weight and increased performance.

Prosport Fiberglass Exhaust Wrap - White - 2" x 50'

T#:385017

Part#: HEA-WRAPKIT-WHT

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Constructed of durable, tight-woven fiberglass, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility.

Show More Show Less

Dinan Heavy Duty Exhaust Band Clamp - 3.00" (76mm)

Call In Or Chat For Best Price!

T#:38688902

Part#: D662-9237

Special Order: No Guaranteed ETA

8% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Qty

8% off MSRP

$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Perfect for the do-it-yourself customer looking for a band clamp that allows for a 360º pressure connection, this clamp fits the build. Created from stainless steel, the clamp allows for connecting to 76mm (3") via a swedged pipe, and provides even clamping pressure and seal around the entire pipe. This makes for a simple install, or a quick removal should the need arise.

Show More Show Less

Stainless Steel Weld-In Oxygen Sensor Bung - M18x1.5mm

T#:587345

Part#: TMS02BUNGKT

In Stock

Sale - Save 25% $ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD

Add to Wish List

Finish your custom exhaust with this T304 stainless steel weld-in oxygen sensor bung. PART DESIGN CNC-cut from T304 Stainless Steel for corrosion resistance Radiused to match 2.50"-3.00" OD tubing for ease of welding Threaded for M18x1.5mm RH oxygen sensors INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.

Show More Show Less

Turner 4" Universal Double Wall Exhaust Tip w/ Brushed Finish ...

Not vehicle specific. You MUST measure prior to purchasing!

T#:599666

Part#: 026374TMS02-10

In Stock

Sale - Save 20% $ 63.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 63.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.19 USD

Add to Wish List

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model. Features & Specifications: 2.5" Inner Diameter 4.0" Outer Diameter Brushed Finish Double Wall Construction Angle Cut Style Includes Stainless Steel Exhaust Clamp

Show More Show Less

Turner Double Wall Slash Cut Exhaust Tip - 2.75 Inlet - 3.5 OD - Step...

Not vehicle specific. You MUST measure prior to purchasing!

T#:9642112

Part#: 026732TMS03-10

In Stock

Sale - Save 10% $ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD

Add to Wish List

Introducing the beautiful Titanium Black Chrome Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads! Universal / custom fit. Not direct replacement of factory tips on factory exhaust. Must measure your existing pipe diameter and clearance.

Show More Show Less

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Ste...

Not vehicle specific. You MUST measure prior to purchasing!

T#:5189169

Part#: 026732TMS02-13

In Stock

Sale - Save 10% $ 173.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.59 USD

Add to Wish List

Qty

Sale - Save 10%

$ 173.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.59 USD

Add to Wish List

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Stepped Left - Chrome brings a sleek and stylish upgrade to BMW exhaust systems. This high-quality exhaust tip features a striking chrome finish and a rolled angle, stepped design that adds both aesthetics and performance to your vehicle. Its precision design ensures a perfect fit and a bold look. With a 3.0-inch inlet and 3.0-inch outer diameter, this exhaust tip is designed to enhance the visual appeal of your BMW's exhaust system.

Premium Chrome Finish: Adds a high-gloss, polished look to your vehicle’s exhaust.
Rolled Angle Design: Provides a stylish and aggressive appearance.
Stepped Left Design: Ensures a precise fit and a distinctive look.
3.0-Inch Inlet & Outer Diameter: Perfectly matches BMW exhaust systems for a seamless upgrade.
Durable Construction: Built to withstand the elements and maintain its shine.

Show More Show Less

Turner Double Wall Slash Cut Exhaust Tip - 2.75 Inlet - 3.5 OD - Step...

Not vehicle specific. You MUST measure prior to purchasing!

T#:9642111

Part#: 026732TMS03-11

Ships on Oct 29, 2026

Sale - Save 10% $ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD

Add to Wish List

Introducing the beautiful Titanium Black Chrome Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design sure to turn heads!

3.5" Universal Brushed Aluminum Swivel Exhaust Tip

Can be used on any 2.5" exhaust piping. Measure before ordering.

T#:13957902

Part#: 049478LA03-04

In Stock

Sale - Save 10% $ 56.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 56.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.29 USD

Add to Wish List

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

3.5" Universal Black Chrome Swivel Exhaust Tip

Can be used on any 2.5" exhaust piping. Measure before ordering.

T#:39802151

Part#: 049478LA03-02

In Stock

Sale - Save 10% $ 69.99

This product was last offered at the strikethrough price on
06-14-2026

$ 62.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 69.99

This product was last offered at the strikethrough price on
06-14-2026

$ 62.99 USD

Add to Wish List

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Ste...

Not vehicle specific. You MUST measure prior to purchasing!

T#:3047555

Part#: 026732TMS03-13

In Stock

Sale - Save 10% $ 162.99

This product was last offered at the strikethrough price on
06-14-2026

$ 146.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 162.99

This product was last offered at the strikethrough price on
06-14-2026

$ 146.69 USD

Add to Wish List

We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips!

Other Features Include:

3.0 Inlet
3.0 Outer Diameter
Black chrome Finish
Left Stepped Design
Rolled Angle Design

Show More Show Less

Turner 3.5" Universal Single Wall Exhaust Tip w/ Brushed Finish ...

Not vehicle specific. You MUST measure prior to purchasing!

T#:599664

Part#: 026374TMS04-01

In Stock

Sale - Save 10% $ 71.99

This product was last offered at the strikethrough price on
06-14-2026

$ 64.79 USD

Add to Wish List

Qty

Sale - Save 10%

$ 71.99

This product was last offered at the strikethrough price on
06-14-2026

$ 64.79 USD

Add to Wish List

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model. Features & Specifications: 2.5" Inner Diameter 3.5" Outer Diameter Brushed Finish Single Wall Construction Straight Cut Style Includes Stainless Steel Exhaust Clamp

Show More Show Less

Turner Motorsport Double Wall Slash Cut Exhaust Tip - 2.5 Inlet - 3.0...

Not vehicle specific. You MUST measure prior to purchasing!

T#:9642109

Part#: 026732TMS02-01

Ships on Sep 24, 2026

Sale - Save 15% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.39 USD

Add to Wish List

Qty

Sale - Save 15%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.39 USD

Add to Wish List

Introducing the beautiful Mirrored Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads!

Show More Show Less

4.0" Universal Black Chrome Swivel Exhaust Tip

Can be used on any 2.5" exhaust piping. Measure before ordering.

T#:39802152

Part#: 049478LA01-02

In Stock

$ 68.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 68.99 USD

Limited Qty Sale

Add to Wish List

Universal 2.5" inlet to 4.0" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

3.5" Universal Mirror Chrome Swivel Exhaust Tip

Can be used on any 2.5" exhaust piping. Measure before ordering.

T#:16109206

Part#: 049478LA03-01

In Stock

Sale - Save 5% $ 66.99

This product was last offered at the strikethrough price on
06-14-2026

$ 63.64 USD

Add to Wish List

Qty

Sale - Save 5%

$ 66.99

This product was last offered at the strikethrough price on
06-14-2026

$ 63.64 USD

Add to Wish List

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner 4" Double Wall Exhaust Tip - Polished Black Chrome Finish ...

Not vehicle specific. You MUST measure prior to purchasing!

T#:5175767

Part#: 026374TMS01-08

In Stock

Sale - Save 21% $ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 73.99 USD

Add to Wish List

Qty

Sale - Save 21%

$ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 73.99 USD

Add to Wish List

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Black Chrome Finish
Double Wall Construction
Straight Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner Motorsport Double Wall Straight Cut Exhaust Tip - 3.0 Inlet - ...

Not vehicle specific. You MUST measure prior to purchasing!

T#:9642119

Part#: 026732TMS06-17

In Stock

Sale - Save 53% $ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 70.02 USD

Add to Wish List

Qty

Sale - Save 53%

$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 70.02 USD

Add to Wish List

Introducing the beautiful Brushed Stainless Straight Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a straight cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!

Show More Show Less

Double Wall Slash Cut Exhaust Tip - 3.0 Inlet - 3.5 OD - Stepped Righ...

Not vehicle specific. You MUST measure prior to purchasing!

T#:9642120

Part#: 026732TMS02-17

In Stock

Sale - Save 31% $ 130.99

This product was last offered at the strikethrough price on
05-03-2026

$ 89.99 USD

Add to Wish List

Qty

Sale - Save 31%

$ 130.99

This product was last offered at the strikethrough price on
05-03-2026

$ 89.99 USD

Add to Wish List

Introducing the beautiful Mirrored Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads!

Show More Show Less

Turner Motorsport BMW Double Wall Slash Cut Exhaust Tip - 2.5 Inlet -...

Not vehicle specific. You MUST measure prior to purchasing!

T#:2119655

Part#: 026732TMS06-01

In Stock

Sale - Save 10% $ 128.99

This product was last offered at the strikethrough price on
06-14-2026

$ 116.09 USD

Add to Wish List

Qty

Sale - Save 10%

$ 128.99

This product was last offered at the strikethrough price on
06-14-2026

$ 116.09 USD

Add to Wish List

Introducing the beautiful Brushed Stainless Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a slash cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!

Show More Show Less

Turner Motorsport Double Wall Rolled Angle Tip - 2.75 Inlet 3.0 OD - ...

Not vehicle specific. You MUST measure prior to purchasing!

T#:9642113

Part#: 026732TMS03-07

In Stock

Sale - Save 28% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.60 USD

Add to Wish List

Qty

Sale - Save 28%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.60 USD

Add to Wish List

We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous black chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips! Other Features Include: 2.75 Inlet 3.0 Outer Diameter 7" Combined Width Black Chrome Left Stepped Design Double Wall Design Rolled Angle 290mm overall lenth

Show More Show Less

Turner Motorsport Double Wall Slash Cut - 2.5 Inlet 3.0 OD - Stepped ...

Not vehicle specific. You MUST measure prior to purchasing!

T#:2119656

Part#: 026732TMS06-02

In Stock

Sale - Save 26% $ 125.99

This product was last offered at the strikethrough price on
05-03-2026

$ 92.99 USD

Add to Wish List

Qty

Sale - Save 26%

$ 125.99

This product was last offered at the strikethrough price on
05-03-2026

$ 92.99 USD

Add to Wish List

Introducing the beautiful Brushed Stainless Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed finish and features a slash cut, stepped design. The brushed finish and slash cut design is sure to turn heads!

Show More Show Less

Turner - 3.5" Black Chrome Swivel Exhaust Tips - Set of 2

T#:39802150

Part#: 049478LA03-02KT

In Stock

Sale - Save 10% $ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.98 USD

Add to Wish List

Qty

Sale - Save 10%

$ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.98 USD

Add to Wish List

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner Motorsport Double Wall Straight Cut Exhaust Tip - 3.0 Inlet - ...

Not vehicle specific. You MUST measure prior to purchasing!

T#:9642118

Part#: 026732TMS06-16

In Stock

Sale - Save 15% $ 152.99

This product was last offered at the strikethrough price on
06-14-2026

$ 130.04 USD

Add to Wish List

Qty

Sale - Save 15%

$ 152.99

This product was last offered at the strikethrough price on
06-14-2026

$ 130.04 USD

Add to Wish List

Introducing the beautiful Brushed Stainless Straight Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a straight cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!

Show More Show Less

Turner - Single Wall Straight Cut Exhaust Tip - 2.5 Inlet - 3.0 OD - ...

Not vehicle specific. You MUST measure prior to purchasing!

T#:9642108

Part#: 026732TMS01-02

Ships on Oct 29, 2026

Sale - Save 31% $ 101.99

This product was last offered at the strikethrough price on
05-03-2026

$ 69.99 USD

Add to Wish List

Qty

Sale - Save 31%

$ 101.99

This product was last offered at the strikethrough price on
05-03-2026

$ 69.99 USD

Add to Wish List

Introducing the beautiful Brushed Straight Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed finish and features a straight cut, stepped design. The brushed finish and slash cut design is sure to turn heads!

Show More Show Less

Turner Motorsport Double Wall Slash Cut Exhaust Tip - 2.5 Inlet - 3.0...

Not vehicle specific. You MUST measure prior to purchasing!

T#:9642107

Part#: 026732TMS02-02

In Stock

Sale - Save 10% $ 126.99

This product was last offered at the strikethrough price on
06-14-2026

$ 114.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 126.99

This product was last offered at the strikethrough price on
06-14-2026

$ 114.29 USD

Add to Wish List

Introducing the beautiful Mirrored Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads!

Show More Show Less

Turner - Dual Tip Double Wall Slash Cut Exhaust Tip - 3.0 Inlet - 3.5...

Not vehicle specific. You MUST measure prior to purchasing!

T#:9642117

Part#: 026732TMS02-16

In Stock

Sale - Save 10% $ 133.99

This product was last offered at the strikethrough price on
06-14-2026

$ 120.59 USD

Add to Wish List

Qty

Sale - Save 10%

$ 133.99

This product was last offered at the strikethrough price on
06-14-2026

$ 120.59 USD

Add to Wish List

Dual Tip Wall Slash Cut Exhaust - 3.0 Inlet - 3.5 OD - Stepped Left - Mirror is the perfect upgrade for those looking to enhance their vehicle's aesthetics and performance. Crafted with a stunning mirror finish, this exhaust tip features a sleek slash cut and stepped left design that adds a touch of sophistication to your vehicle. Its double-wall construction ensures durability and a premium look, making it a must-have for any car enthusiast.

Enhanced Appearance: Mirror finish provides a polished, high-end look.
Durable Construction: Double-wall design for long-lasting performance.
Precision Fit: 3.0-inch inlet and 3.5-inch outer diameter for a perfect fit.
Stylish Design: Slash cut and stepped left design for a unique, aggressive appearance.
Easy Installation: Designed for straightforward installation on compatible vehicles.

Show More Show Less

Turner 3.5" Brushed Aluminum Swivel Exhaust Tips - Set of 2

Can be used on any 2.5" exhaust piping. Measure before ordering.

T#:21275555

Part#: 049478LA03-04KT

In Stock

Sale - Save 10% $ 113.98

This product was last offered at the strikethrough price on
06-14-2026

$ 102.58 USD

Add to Wish List

Qty

Sale - Save 10%

$ 113.98

This product was last offered at the strikethrough price on
06-14-2026

$ 102.58 USD

Add to Wish List

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner Motorsport Double Wall Slash Cut Exhaust Tip - 2.75 Inlet - 3....

Not vehicle specific. You MUST measure prior to purchasing!

T#:9642115

Part#: 026732TMS06-07

In Stock

Sale - Save 39% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 74.02 USD

Add to Wish List

Qty

Sale - Save 39%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 74.02 USD

Add to Wish List

Introducing the beautiful Brushed Stainless Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a slash cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!

Show More Show Less

Turner 3.5" Universal Double Wall Exhaust Tip w/ Chrome Finish ...

Not vehicle specific. You MUST measure prior to purchasing!

T#:599665

Part#: 026374TMS02-01

In Stock

Sale - Save 3% $ 89.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.29 USD

Add to Wish List

Qty

Sale - Save 3%

$ 89.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.29 USD

Add to Wish List

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model. Features & Specifications: 2.5" Inner Diameter 3.5" Outer Diameter Chrome Finish Double Wall Construction Angle Cut Style Includes Stainless Steel Exhaust Clamp

Show More Show Less

Turner - 3.5" Black Chrome Swivel Exhaust Tips - Set of 4

T#:39802153

Part#: 049478LA03-02KT1

In Stock

Sale - Save 10% $ 279.99

This product was last offered at the strikethrough price on
06-14-2026

$ 251.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 279.99

This product was last offered at the strikethrough price on
06-14-2026

$ 251.96 USD

Add to Wish List

Set of 4 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner - 3.5" Brushed Aluminum Swivel Exhaust Tips - Set of 4 ...

T#:21275554

Part#: 049478LA03-04KT1

In Stock

Sale - Save 10% $ 227.96

This product was last offered at the strikethrough price on
06-14-2026

$ 205.16 USD

Add to Wish List

Qty

Sale - Save 10%

$ 227.96

This product was last offered at the strikethrough price on
06-14-2026

$ 205.16 USD

Add to Wish List

Universal exhaust tips with a swivel adjustability to fine tune your exhaust. 2.5" Inlet & a 3.5" Double Wall, Angle Cut Outlet

Turner 4" Universal Double Wall Exhaust Tip w/ Chrome Finish ...

Not vehicle specific. You MUST measure prior to purchasing!

T#:599667

Part#: 026374TMS02-02

In Stock

Sale - Save 3% $ 91.99

This product was last offered at the strikethrough price on
06-14-2026

$ 89.23 USD

Add to Wish List

Qty

Sale - Save 3%

$ 91.99

This product was last offered at the strikethrough price on
06-14-2026

$ 89.23 USD

Add to Wish List

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model. Features & Specifications: 2.5" Inner Diameter 4.0" Outer Diameter Chrome Finish Double Wall Construction Angle Cut Style Includes Stainless Steel Exhaust Clamp

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW A90 MKV Supra B58 3.0L

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results