N-Series Ultimate Performance Ignition Coil - Red - Set Of Six ...

T#:23714967

Part#: NSERIESIGNCOILKT

In Stock

$ 205.99 USD

Add to Wish List

Qty

$ 205.99 USD

Add to Wish List

Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.

Show More Show Less

Water Pump And Thermostat Kit - BMW N52 3.0L

T#:17073598

Part#: 11537549476KT

In Stock

Sale - Save 25% $ 424.99

This product was last offered at the strikethrough price on
05-03-2026

$ 318.83 USD

Add to Wish List

Qty

Sale - Save 25%

$ 424.99

This product was last offered at the strikethrough price on
05-03-2026

$ 318.83 USD

Add to Wish List

Includes everything you may need to replace your water pump and thermostat.

Billet Oil Filter Cap

T#:21045489

Part#: BMS-OFC

In Stock

Starting at $ 89.00 USD

Add to Wish List

Starting at $ 89.00 USD

Add to Wish List

The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA

Show More Show Less

N52 Oil Filter Housing Gasket Kit - Includes Oil Pressure Sensor ...

T#:15677580

Part#: 11427540759-KT

In Stock

Sale - Save 1% $ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.73 USD

Add to Wish List

Qty

Sale - Save 1%

$ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.73 USD

Add to Wish List

This kit includes: 1 Oil Filter Housing Gasket (11428637821) 1 M8x28 bolt (11427540759) 1 M8x43 bolt (11427540763) 1 M8x78 bolt (11427540758) 1 Oil Pressure Sensor (12617568480)

VANOS Solenoid Valve Kit - N52 N54 3.0L

T#:25805743

Part#: 11367585425TKT

In Stock

Sale - Save 25% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD

Add to Wish List

Qty

Sale - Save 25%

$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD

Add to Wish List

Failed solenoid valves can lead to numerous issues, such as sluggish acceleration, rough idle, loss of power, limp mode, and check engine lights. Luckily, these issues are easily fixed with our budget-friendly VANOS Solenoid Valve Kit. This kit contains two URO brand VANOS Solenoids, two sets of OEM Elring gaskets, and two Genuine BMW mounting bolts, all for less than the price of a single Genuine BMW Solenoid.

Show More Show Less

Liqui Moly Special Tec LL 5W-30 Oil Change Kit / Inspection I - N20, ...

T#:22130463

Part#: LMTECLLCHNGIN1KT

In Stock

$ 98.63 USD

Add to Wish List

Qty

$ 98.63 USD

Add to Wish List

Ensuring your driving machine remains in optimal condition necessitates consistent maintenance. BMW's recommended oil change interval depends on your driving habits. We recommend changing your oil after a maximum of 10,000 miles. For those engaging in aggressive or city driving, a 5,000-mile oil service interval is preferable. This kit comprises: Seven Liters of Liqui Moly Special Tec LL Engine Oil 5w-30 Engine Oil Filter Oil Drain Plug Gasket (included with filter kit) Sustain the flawless performance of your BMW with this high-quality service kit from Turner Motorsport.

Show More Show Less

BMS Billet Clutch Delay Valve (CDV) Delete - E8X/E9X

T#:2513299

Part#: BMWCLUTCHVAVLE

Ships in 1 Business Day

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Enhance the performance of your stick shift BMW with the BMS clutch valve, a must-have upgrade for serious BMW enthusiasts. This high-performance replacement replaces the factory clutch delay valve, resulting in quicker shifts, longer clutch life, and improved 0-60 times. Designed with CNC machined precision, it installs quickly using factory-like connections with no modifications required. Made in the USA, this clutch valve is essential for maximizing the driving experience of your BMW.

Benefits:

Replaces factory clutch delay valve for improved performance
Quicker shifts and improved 0-60 times
Longer clutch life
Easy installation with factory-like connections
Made in the USA

Show More Show Less

Genuine BMW Oil Change Kit / Inspection I - N52, N54, N55

T#:22789662

Part#: OILCHGN5XKT

In Stock

$ 114.99 USD

Add to Wish List

Qty

$ 114.99 USD

Add to Wish List

Ensure your driving machine's peak performance with regular maintenance. Turner Motorsport offers a comprehensive service kit to keep your BMW in top shape. With varying oil change intervals based on driving habits, this kit includes:

Seven Liters of BMW Synthetic Engine Oil
Engine Oil Filter
Oil Drain Plug Gasket (Included with filter kit)

For optimal results, we recommend an oil change every 10,000 miles, or every 5,000 miles for aggressive or city driving. Trust Turner Motorsport to provide the quality and precision your BMW deserves.

Show More Show Less

Spark Plug Gapper Tool BMS Billet

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

BMW / MINI Jack Pad Adapters - Blue - Set Of 4

T#:31522930

Part#: BMWJACKPADBLUE4

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Performance Brake Fluid Flush Kit - Level 3

T#:15677547

Part#: 007237SCH01A-KT

Ships on Oct 12, 2026

Sale - Save 9% $ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD

Add to Wish List

Qty

Sale - Save 9%

$ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD

Add to Wish List

Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.

Show More Show Less

Automatic Transmission Service Kit - Level 2 - BMW GA6L45R Transmissi...

For vehicles equipped with automatic transmission GA6L45R

T#:23748159

Part#: 24117593565TKT

In Stock

Sale - Save 7% $ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 185.08 USD

Add to Wish List

Qty

Sale - Save 7%

$ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 185.08 USD

Add to Wish List

Includes all the necessary components for a complete transmission service with Liqui Moly fluid Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission filter 7 quarts Liqui Moly Top Tec 1800 automatic transmission fluid Drain plug Fill plug

Show More Show Less

Titanium Coolant Bleeder Screw Upgrade

T#:38621407

Part#: BMS-TCBS

Back Ordered

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Replace your fragile OEM plastic coolant bleeder screw, which is prone to cracking and failure, with a premium titanium upgrade built for strength and style under the hood. Factory plastic components weaken over time due to constant heat cycles, leading to brittleness and potential failure. Our titanium replacement delivers superior durability, being twice as strong as aluminum yet 45% lighter than steel, ensuring unmatched resilience and long-term reliability for your coolant system. More than an upgrade, it’s a must-have for engine longevity. CNC-machined from solid titanium, each screw features a laser-etched Burger Motorsports logo and is hand-burned to create unique color patterns—no two are alike. A heavy-duty replacement O-ring is included for a perfect fit.

Show More Show Less

Rear License Plate Holder Kit

T#:15744044

Part#: 51118122522KT

In Stock

Sale - Save 6% $ 61.99

This product was last offered at the strikethrough price on
05-03-2026

$ 58.43 USD

Add to Wish List

Qty

Sale - Save 6%

$ 61.99

This product was last offered at the strikethrough price on
05-03-2026

$ 58.43 USD

Add to Wish List

Do you need to keep that license plate in place, but don’t have the proper holder on your BMW or MINI? If so you will need this bracket to hold the plate in place. This mounts to the trunk is fitted with two screw into the gold metal center holes and 4 bolts to the license plate holes to complete fitment of your plate.

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW N52 ...

T#:22130432

Part#: 11287530314TKT

Ships in 6 Business Days

Sale - Save 18% $ 127.99

This product was last offered at the strikethrough price on
05-03-2026

$ 104.71 USD

Add to Wish List

Qty

Sale - Save 18%

$ 127.99

This product was last offered at the strikethrough price on
05-03-2026

$ 104.71 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

Oil Pump Chain - E36 E46 E34 E39 Z3 Z4

T#:14529

Part#: 11417576915

In Stock

$ 45.89 USD

Add to Wish List

Qty

$ 45.89 USD

Add to Wish List

This is an OEM oil pump chain for BMW's with the M50/M52/M54/S50/S52 6 cylinder engine. We recommend replacing the oil pump chain any time you remove the oil pump from the car.

IWIS is a leader in complex engine parts. Using advanced techniques in research and design allows IWIS to offer parts that not only repair but ultimately improve the way your engine runs.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
1996-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 Z3 BMW M Roadster M Coupe
2003-2006 E85 BMW Z4 2.5i Z4 3.0i

Show More Show Less

Titanium Exhaust Wrap - 2" X 25'

T#:385025

Part#: HEA-WRAPKIT-25

Ships in 1 Business Day

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!

Key Features:

2" wide x 1/16" thick
Durable, tightly woven, 100% fiberglass
Reduce under hood temperatures
Protect other engine components
Protect your hands/arms from burns
Each roll comes with 5 FREE, 14" long stainless steel zip ties

Show More Show Less

BMW N52 Valve Cover & PCV Valve Refresh Kit

T#:21735875

Part#: VALVECVRN52KT

In Stock

Sale - Save 12% $ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 411.03 USD

Add to Wish List

Qty

Sale - Save 12%

$ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 411.03 USD

Add to Wish List

Maintaining the peak performance and reliability of your BMW N52 engine is essential for a smooth and enjoyable driving experience. One of the most effective ways to achieve this is by replacing critical components like the valve cover, crankcase vent hose, angle connector with heating element, and cylinder sleeve. In this article, we'll delve into the numerous benefits of upgrading these vital parts, ensuring your BMW N52 operates at its best. Optimized Engine Performance: Replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve enhances your BMW N52's engine performance. The valve cover plays a crucial role in sealing the engine, preventing oil leaks and ensuring optimal valve operation. When you upgrade these components, you reduce the risk of performance-robbing oil leaks and maintain precise valve timing, resulting in improved horsepower and torque. Enhanced Reliability: Reliability is paramount for any BMW owner. These components, when aged or damaged, can lead to severe engine issues. By replacing them, you significantly reduce the likelihood of unexpected breakdowns or costly repairs, ensuring your BMW N52 engine runs smoothly and reliably for years to come. Improved Fuel Efficiency: An efficiently operating engine not only performs better but also consumes less fuel. The replacement of these components leads to better combustion, reduced emissions, and ultimately improved fuel efficiency. This means fewer trips to the gas station and a lighter environmental footprint. Reduced Maintenance Costs: Regular maintenance and repairs can add up over time. By proactively replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve, you mitigate the risk of more extensive engine damage that could lead to expensive repairs down the road. In the long term, this can translate into significant cost savings. Extended Engine Lifespan: The longevity of your BMW N52 engine is directly tied to the quality and condition of its components. When you invest in high-quality replacements, you're effectively extending the lifespan of your engine. This not only preserves the value of your BMW but also allows you to enjoy its performance for years to come. Precise Temperature Control: The angle connector with heating element is vital for maintaining optimal engine temperature, especially in cold weather. A malfunctioning or worn-out connector can disrupt temperature control, affecting engine performance. Replacing this component ensures consistent and precise temperature management. Customized Upgrades: When replacing these components, you have the opportunity to choose high-performance or specialized alternatives, allowing you to customize your BMW N52 to your preferences. Whether you prioritize power, efficiency, or specific driving conditions, there are options available to tailor your engine's performance accordingly. Included in the BMW N52 Valve Cover & PCV Valve Refresh Kit: 6 Cylinder Sleeves 1 Alternator Mounting Screw Set 1 Angle Connector with Heating Element 1 Valve Cover - Gasket Included 1 Crankcase Vent Hose

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

Ships in 1 Business Day

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

OEM IWIS Lower Timing Chain - E36, E46, E39, Z3 E60

T#:362220

Part#: 11311432176

In Stock

$ 83.99

This product was last offered at the strikethrough price on
06-08-2026

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

IWIS is a leader in complex engine parts. Using advanced techniques in research and design allows IWIS to offer parts that not only repair, but ultimately improve the way your engine runs.

Iwis Timing Chain - Upper

T#:1196187

Part#: 11311432177S1

In Stock at Vendor

$ 41.76

This product was last offered at the strikethrough price on
05-11-2026

$ 40.86 USD

Add to Wish List

Qty

$ 40.86 USD

Add to Wish List

The timing chain in any vehicle can begin to stretch and rattle over time. This is a common issue, and though BMW says it is a lifetime part, most enthusiasts decide to change them. If you need only the timing chain instead of a kit, ECS Tuning has your replacement.

Show More Show Less

Iwis Oil Pump Chain

T#:375888

Part#: 11417584079

In Stock

$ 63.99 USD

Add to Wish List

Qty

$ 63.99 USD

Add to Wish List

Should be replaced any time the oil pump is removed or chain noise is detected

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Prosport Titanium Exhaust Wrap - 2" x 50

T#:385019

Part#: HEA-WRAPKIT-50

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!

Show More Show Less

Rear Differential Mounts - OEM/Meyle HD Rubber - E46, X3, Z4 ...

T#:339943

Part#: E46-MY-DIFF

In Stock

$ 88.99

This product was last offered at the strikethrough price on
02-26-2026

Starting at $ 55.99 USD

Add to Wish List

Starting at $ 55.99 USD

Add to Wish List

These rubber bushings from Meyle are a direct replacement for the stock differential bushings in the E46 3-series, E83 X3 SAV, and Z4 Roadster. If your original bushings are worn (likely around 100,000 miles) these are a great replacement upgrade. The front bushings are the stock OEM type rubber bushings. The rear bushing is a Meyle HD upgrade over stock - about 15% stiffer than the originals. This means the bushing will not flex and twist as much. This puts more power to the wheels since power is no longer used up for 'torquing' the bushing. These are not race bushings; the rubber material is perfectly suitable for street use.

The non-M E46/E83/Z4 models use three differential mounts - two front bushings in the subframe and one rear mount in the diff cover. This set of bushings covers all three. You can opt to include new mounting hardware in the Options list below.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Roadster

Show More Show Less

Prosport Gold Heat Reflective Tape - 2" x 15'

T#:385020

Part#: HEA-GWRAP-15

Back Ordered

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Constructed of laminated light-weight glass cloth, this gold reflective heat tape is designed to reflect 80% of radiant heat. With excellent pliability, this tape is easy to install. It's as simple as peel and stick.

Show More Show Less

Tire Valve For TPMS Systems

T#:641919

Part#: AUL1SENSOR

In Stock

Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

Qty

Sale - Save 29%

$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use

IWIS Chain Tensioner - With Gasket Ring - BMW N52 N54 N55 3.0L ...

T#:43378595

Part#: 11317584723

In Stock at Vendor

$ 100.99

This product was last offered at the strikethrough price on
05-07-2026

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

Over time, your engine timing components begin to wear out. Tensioners weaken, chains can stretch, and timing chain guides can wear down. All of these lead to the possibility of the timing chain jumping teeth on the sprockets, causing your timing to shift. This could result in rough idle and reduced engine power, or even complete engine failure. Prevent damage to your engine with new timing components, such as this IWIS timing chain tensioner. Note, we recommend replacing timing components every 100K miles, or sooner, depending on the condition of the timing components.

Show More Show Less

BMS Pedal Tuner - N52, N54, N55 (Manual Transmission)

T#:20155613

Part#: BMSPBT-M

Ships on Aug 10, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

52mm Prosport Electrical Oil Pressure Gauge - Clear Lens/White LED ...

T#:31390598

Part#: PSTOP270-12

In Stock at Vendor

$ 45.00 USD

Add to Wish List

Qty

$ 45.00 USD

Add to Wish List

52mm Prosport Electrical Oil Pressure Gauge - Clear Lens/White LED provides precise monitoring of engine oil pressure, ensuring that drivers can detect issues before they become catastrophic. This high-quality gauge is crucial for tracking engine performance and preventing potential damage.

Accurate Oil Pressure Monitoring: Measures oil pressure from 0-100 PSI, helping to prevent engine damage by providing early warnings.
Clear Lens: Offers a clear and unobstructed view of the gauge readings, making it easy to monitor engine health at a glance.
White LED Backlighting: Enhances readability in low-light conditions with a bright and clear display.
Complete Kit: Includes sender, mounting hardware, visor, decals, and instructions for easy installation.
Durable Construction: Designed to withstand the demands of high-performance driving and continuous use.

Show More Show Less

E46 / E53 / E39 / E83 M54 Performance Ignition Service Kit

T#:22130469

Part#: M54PERFINGSRVKT

In Stock

Sale - Save 25% $ 243.35

This product was last offered at the strikethrough price on
05-03-2026

$ 182.83 USD

Add to Wish List

Qty

Sale - Save 25%

$ 243.35

This product was last offered at the strikethrough price on
05-03-2026

$ 182.83 USD

Add to Wish List

This BMW Ignition coil is engineered with core windings optimized to enhance firepower and facilitate a faster, more efficient combustion process. This results in increased torque in the lower RPM range and enhanced horsepower in the upper range. The extent of these improvements will vary depending on your BMW engine's current condition, but you'll undoubtedly notice the difference. Additionally, it contributes to improved fuel economy. Ensure your engine runs smoothly and operates at its peak with an ignition service kit from Turner Motorsport. This comprehensive kit comprises 4 Bosch ignition coils with plug boots, Bosch spark plugs, and a packet of American Grease Stick dielectric grease. As an assurance of quality, all Bavarian Autosport brand parts are backed by a 2-year warranty.

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

Improved Racing BMW Oil Cooler Thermostat (180F)

T#:27171935

Part#: IRTHERM

Back Ordered

Starting at $ 318.99 USD

Add to Wish List

Starting at $ 318.99 USD

Add to Wish List

Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.

Show More Show Less

Rear Wheel Bearing for E36 M3, E46 M3, 330 and E46 xi, E38, E83 ...

T#:338100

Part#: 33411090505

In Stock

$ 74.99

This product was last offered at the strikethrough price on
02-19-2026

Starting at $ 59.98 USD

Add to Wish List

Starting at $ 59.98 USD

Add to Wish List

This is a replacement rear wheel bearing for all:
1992-1998 E36 BMW M3
1999-2005 E46 BMW 325xi 330i 330ci 330xi M3
1995-2001 E38 BMW 740i 740il 750il
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
1997-2002 Z3 BMW M Roadster M Coupe
2003-2008 E85 BMW Z4 M Roadster M Coupe
2000-2003 E52 BMW Z8 Roadster

Rear wheel bearings are sold individually, and 2 are required per car.

Show More Show Less

Gear Selector Valve Replacement Kit - BMW E9X E82/88 w/ GA6L45R Autom...

T#:24344795

Part#: GA6L45RGSVKT

In Stock

$ 453.99 USD

Add to Wish List

Qty

$ 453.99 USD

Add to Wish List

A common failure point that causes the loss of gear selection, this kit includes everything needed to replace the gear selector valve connected to your transmission valve body.

OEM Ignition Service Kit - BMW M54 2.5L 3.0L

T#:30497158

Part#: 12131712219OEMKT

In Stock

$ 253.99 USD

Add to Wish List

Qty

$ 253.99 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug. To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OEM quality components, replacing any potential fault points in your ignition system for peak performance!

Show More Show Less

Genuine BMW 17" Emergency Spare Wheel/Tire Set - E60 E61 E83 ...

T#:41289780

Part#: 36116758778T

In Stock

$ 254.99 USD

Add to Wish List

Qty

$ 254.99 USD

Add to Wish List

Includes Genuine BMW 17x4" ET18 steel wheel with mounted and balanced Kumho 135/80/17 tire.

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four ...

T#:31158762

Part#: WBFI77-E88-501

Ships in 2 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

Provide a polished, high-quality look by covering the open center hole
Are machined from 6061-T5611 aluminum for superior strength and durability
Feature a hand-brushed finish for a seamless OEM appearance
Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
Are sold in sets of four, with center caps not included

Show More Show Less

BMW Jack Pad Silver - Set Of 4

T#:26438196

Part#: BMWJACKPADSILR4

Ships in 1 Business Day

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

In Stock

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

7cm Universal Fender Flares - Pair

T#:23020133

Part#: EL7

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

Enhance Vehicle Appearance with Clinched Fender Flares

Crafted from impact-resistant ABS plastic, Clinched manufactures fender flares akin to OE bumpers, ensuring both durability and lightweight properties. These adaptable fender flares offer universal fitting, suitable for various vehicle makes and models with minimal adjustments. Choose between seamlessly blending them with the car's body or showcasing them with visible rivets and edges.

Installation involves rivets and bolts, requiring drilling and cutting of the original fenders for proper fitting. Utilize a heat gun or hair dryer to heat and mold the flares, allowing them to conform to the factory body lines. Their remarkable pliability distinguishes them from fiberglass flares.

Show More Show Less

Rubber Gasket - 10 Meters

T#:31522979

Part#: RUBBER-BLK10

Special Order: No Guaranteed ETA

$ 100.00 USD

Add to Wish List

Qty

$ 100.00 USD

Add to Wish List

Rubber Gasket - 5 Meters

T#:28968876

Part#: RUBBER-BLK5

Special Order: No Guaranteed ETA

$ 50.00 USD

Add to Wish List

Qty

$ 50.00 USD

Add to Wish List

Rubber Gasket - 5 Meters

Rubber Gasket - 5 Meters is a versatile sealing solution suitable for various applications. This high-quality rubber gasket comes in a 5-meter length, providing ample material for multiple projects. With its durable construction and flexible design, it offers excellent sealing properties, ensuring protection against moisture, dust, and other contaminants. Whether for automotive, industrial, or household use, this rubber gasket is a reliable choice for sealing needs.

Versatile sealing solution for various applications
5-meter length provides ample material for multiple projects
Durable construction ensures long-lasting performance
Flexible design offers excellent sealing properties
Protects against moisture, dust, and other contaminants

Upgrade your sealing solutions with the Rubber Gasket - 5 Meters and enjoy reliable protection in automotive, industrial, or household applications.

Show More Show Less

Extended Spark Plug Socket

T#:391150

Part#: SUU884506

In Stock

9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

Qty

9% off MSRP

$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

3/8" drive socket with 5/8" opening for most spark plugs

ACM A/C Expansion Valve - E46, E83

For vehicles with production date from 03/1999

T#:370958

Part#: 64503452759

Ships in 3 Business Days

$ 58.99

This product was last offered at the strikethrough price on
05-07-2026

$ 56.99 USD

Add to Wish List

Qty

$ 56.99 USD

Add to Wish List

Part of the a/c system

Ignition Service Kit - E9x, E82, E88, E70, E83

T#:41425001

Part#: 12138616153T1KT

In Stock

$ 282.99

This product was last offered at the strikethrough price on
02-26-2026

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

Comes with coil packs, dialectic grease and spark plugs for an all inclusive kit for servicing your BMW!

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

ACM A/C Pressure Sensor

T#:370959

Part#: 64539181464

In Stock

10% off MSRP $ 56.57

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 50.99 USD

Add to Wish List

Qty

10% off MSRP

$ 56.57

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 50.99 USD

Add to Wish List

Part of the A/C system

10cm "Muscle" Universal Fender Flares - Pair

T#:23152012

Part#: MS10

Special Order: No Guaranteed ETA

$ 290.00 USD

Add to Wish List

Qty

$ 290.00 USD

Add to Wish List

Clinched Universal Fender Flares

Crafted from high-quality, impact-resistant ABS plastic, Clinched manufactures universal fender flares suitable for various makes and models, including BMWs. These flares, akin to OE bumpers, offer exceptional strength combined with lightweight properties. Universally designed, they require minimal customization for installation. You have the option to seamlessly blend them with your car's body or leave them with exposed rivets and edges for a distinct look. Please note, installation involves drilling and cutting the original fenders. Using a heat gun (or hair dryer) aids in molding the flares to conform to your vehicle's factory body lines, thanks to their high pliability, setting them apart from fiberglass alternatives.

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Aug 10, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW X Series E83 (2004-2010)

Sub-Categories

Benefits:

Enhance Vehicle Appearance with Clinched Fender Flares

Rubber Gasket - 5 Meters

Clinched Universal Fender Flares

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results