Showing 7513 results for ""

Sort By:

Mityvac - Corporate Logo
T#:585064
Part#: MTYMV5530
Ships in 6 Business Days
$ 274.99 USD
Free Shipping
$ 274.99 USD
Free Shipping
Designed to test compression in cylinder.
Spal - Corporate Logo
T#:598818
Part#: 30102113
In Stock at Vendor
$ 257.99 USD
Free Shipping
$ 257.99 USD
Free Shipping
2467 CFM. High performance puller fan with curved blades. This is a universal fan for applications that require more air flow or for engine compartments that have tight tolerances such as an aftermarket turbo set up that needs more clearance. This fan is universal and you must make it fit your application. It is not a direct bolt on. Made in Italy. Size: 16.25in x 15.75in x 3.5in Airflow (CFM): 2467
Show More Show Less

Upper Oil Separator Vent Tube
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:362022
Part#: 11617504535
Ships in 1 Business Day
$ 20.99 USD
Free Shipping on orders $49 and up
$ 20.99 USD
Free Shipping on orders $49 and up
The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate.
Show More Show Less

Permatex - Corporate Logo
T#:2958751
Part#: 25223
Ships in 1 Business Day
$ 54.99 USD
Free Shipping on orders $49 and up
Make leak-proof gaskets and return equipment to service immediately! Permatex premier instant gasket maker was designed as a replacement for conventional gaskets.
AGA Tools - Corporate Logo
T#:5189117
Part#: AGA-STA
Ships in 7 Business Days
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
Easily torque your driveshaft to specifications.

ATD Tools - Corporate Logo
T#:3657943
Part#: ATD3601
Ships in 1 Business Day
$ 59.99 USD
Free Shipping on orders $49 and up
Always have extra o-rings
Hawk - Corporate Logo
T#:16478
Part#: TMS16478
Ships on Nov 9, 2026
$ 389.99 USD
Free Shipping
$ 389.99 USD
Free Shipping
Hawk DTC-70 race pads have a heavy torque and high temperature compound with aggressive but controllable initial bite and brake modulation. These pads are intended for track-use only due to the very high-temperature ranges that they work in.
Show More Show Less


APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:201373
Part#: EC71910ET25AN
Ships in 5 Business Days
$ 469.00 USD
Free Shipping
$ 469.00 USD
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less
AFE - Corporate Logo
T#:44359952
Part#: 77-20007
In Stock
Sale - Save 7% $ 268.00

This product was last offered at the strikethrough price on
10-19-2026

$ 247.90 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 268.00

This product was last offered at the strikethrough price on
10-19-2026

$ 247.90 USD
Free Shipping on orders $49 and up
No more throttle lag!
Crankcase Vent Return Hose - E46 E39 E60 Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:12449
Part#: 11617504536
Ships in 1 Business Day
$ 31.99 USD
Free Shipping on orders $49 and up
$ 31.99 USD
Free Shipping on orders $49 and up

This is the BMW crankcase return line that goes from the intake manifold to the top CCV connecting hose. We also offer a complete CCV repair kit
Since the late 1800’s Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.


This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1997-2003 E39 BMW 525i 528i 530i
2004-2010 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2000-2006 E53 BMW X5 3.0i
1/2000-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2005 E85 BMW Z4 2.5i Z4 3.0i

Show More Show Less


Prosport Performance - Corporate Logo
T#:389626
Part#: 216EVOWGWT.F
Ships in 2 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Water Temperature Guage (80-280 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Green or White)
Show More Show Less
345x28 Brembo Brake Kit Slotted Rotors (Pair - Left and Right) ...
2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!
Brembo - Corporate Logo
T#:16463
Part#: BREMBO-345-28-SL
In Stock
$ 1,130.00 USD
Free Shipping
$ 1,130.00 USD
Free Shipping
Brembo replacement friction rings (no hat), only for a Brembo Brake Kit.
Ignition Projects - Corporate Logo
T#:1637696
Part#: IP-A122609
Ships in 5 Business Days
$ 1,055.00 USD
Free Shipping
$ 1,055.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less

Fischer and Plath - Corporate Logo
T#:403883
Part#: 07119963151
Ships in 1 Business Day
$ 3.99

This product was last offered at the strikethrough price on
05-07-2026

$ 2.99 USD
Free Shipping on orders $49 and up
$ 2.99 USD
Free Shipping on orders $49 and up
A12x17-CU

Lisle - Corporate Logo
T#:641698
Part#: LIS12390
Ships in 6 Business Days
$ 59.99 USD
Free Shipping on orders $49 and up
Tool comes with both 1/2" and 3/8" drive.
Corteco - Corporate Logo
T#:591600
Part#: 11237564969
Ships in 1 Business Day
$ 355.99 USD
Free Shipping
$ 355.99 USD
Free Shipping
Reduces vibrations and connects accessories

Hawk - Corporate Logo
T#:25008
Part#: TMS25008
Back Ordered
$ 197.99 USD
Free Shipping
$ 197.99 USD
Free Shipping
Hawk Blue racing pads are among the most aggressive track pads on the market. The formula for the friction material ensures a high level of braking performance especially at elevated temperatures. Hawk Blue pads have been a favorite of club racers for over a decade. Few pads can match their torque output at race temps. These pads do not work well when cold and will be abrasive to your rotors.

Features and Characteristics:
+ very high friction / torque performance
+ medium temp range
+ up to 1000*F
+ abrasive metallic content that requires heat
+ good, predictable modulation at high temps

REAR Brake Pad Applications:
2001-2006 E46 BMW 330i 330Ci 330Xi
2001-2006 E46 BMW M3
1999-2004 E39 BMW M5
2007 E60 BMW 525i
1995-2001 E38 BMW 740i, 740i Sport, 740iL
2004-2010 E83 BMW X3 2.5i, X3 3.0i, X3 3.0si
1999-2006 E53 BMW X5 3.0i, X5 4.4i
2007-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
2000-2003 E52 BMW Z8 Roadster
Show More Show Less
Nissens - Corporate Logo
T#:373949
Part#: 17113415693
Ships in 2 Business Days
$ 191.46

This product was last offered at the strikethrough price on
05-11-2026

$ 178.96 USD
$ 178.96 USD

380x34 Brembo Brake Kit Slotted Rotors (Pair - Left and Right) ...
2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!
Brembo - Corporate Logo
T#:16467
Part#: BREMBO-380-34-SL
In Stock
$ 1,570.00 USD
$ 1,570.00 USD
Brembo replacement friction rings (no hat), only for a Brembo Brake Kit. Price includes Left and Right discs with hardware.

Coolant Hose - Cylinder Head to T-Stat Housing
2X Entries Into Our F80 M3 Sweepstakes
URO Premium - Corporate Logo
T#:587667
Part#: 11537552339PRM
Ships in 1 Business Day
$ 27.99 USD
Free Shipping on orders $49 and up
Replace your leaking coolant hose
Performance Tool - Corporate Logo
T#:2242238
Part#: W352
Ships in 1 Business Day
$ 32.99 USD
Free Shipping on orders $49 and up
Heat treated alloy steel.
Hawk - Corporate Logo
T#:216182
Part#: TMS216182
Ships on Nov 9, 2026
$ 496.99 USD
Free Shipping
$ 496.99 USD
Free Shipping
The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics.
Show More Show Less


ARP - Corporate Logo
T#:4309
Part#: 100-9942
In Stock at Vendor
$ 202.99 USD
Free Shipping
$ 202.99 USD
Free Shipping
We highly recommend using a stretch gauge when installing rod bolts and other fasteners, where it is possible to measure the length of the fastener.
Performance Tool - Corporate Logo
T#:1809133
Part#: W80575
Ships in 1 Business Day
$ 17.62 USD
Free Shipping on orders $49 and up
Comfortable vinyl grip handles.
CTEK - Corporate Logo
T#:6460300
Part#: 56-958
In Stock at Vendor
$ 179.99 USD
Free Shipping on orders $49 and up
The MUS 4.3 POLAR (Part No. 56-958) has been specially developed to offer excellent all-around charging with special cold weather performance and adapted AC and DC cables to handle severe cold down to -22°F (-30°C).
Show More Show Less

FX250 Stage 2 Clutch Kit *Door Buster - Open Box*
For vehicles with 6 speed 22 Spline Transmission and Production Date From 03/2003
Clutch Masters - Corporate Logo
T#:567164
Part#: 03051-HD0F-D
Ships in 3 Business Days
$ 621.99 USD
Free Shipping on orders $49 and up
$ 621.99 USD
Free Shipping on orders $49 and up

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

  • Extra long life street system
  • Holding capacity 70% over stock
  • Heavy-Duty reinforced pressure plate
  • Sprung organic/fiber tough disc


All Clutch Masters clutch kits come complete with:

  • Pressure Plate
  • Clutch Disc
  • Throw-out Bearing
  • Pilot Bearing or Bushing
  • Alignment Tool
  • Pressure Plate Bolts


This clutch kit does not include a flywheel. Requires use of single mass flywheel 

Fitment in following BMWs:This item fits the following BMWs: 
2003-2005 E46 BMW 330i 330ci  only for 6-speed manual transmission  *Door Buster Special - New Product*

Show More Show Less

CTEK - Corporate Logo
T#:6460304
Part#: 56-915
In Stock at Vendor
$ 28.99 USD
Free Shipping on orders $49 and up
Don't scratch your paint with your battery tender.
SnowPerformance - Corporate Logo
T#:21374112
Part#: SNO-N1400
In Stock
$ 31.99

This product was last offered at the strikethrough price on
09-29-2026

$ 28.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 31.99

This product was last offered at the strikethrough price on
09-29-2026

$ 28.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up

URO - Corporate Logo
T#:592961
Part#: 11617533399
Ships in 1 Business Day
$ 22.99 USD
$ 22.99 USD
Connecting Hose from Vent Valve
QuickJack - Corporate Logo
T#:403117
Part#: 5300863
Ships in 4 Business Days
$ 86.00 USD
Free Shipping
$ 86.00 USD
Free Shipping

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads. If the blocks included with the QuickJack lift system have a hard time reaching the jack points of the vehicle, these can be used to help properly reach and support the vehicle on the lift.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 2" tall x 3" wide

Show More Show Less

Powerflex Black Series - Corporate Logo
T#:384020
Part#: PFR5-4613BX2
Ships in 1 Business Day
$ 93.99 USD
Free Shipping
$ 93.99 USD
Free Shipping

Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. ​

This part fits the following BMWs:
2000-2006 E46 ALL
2003 - 2006 E83 X3 2.5i X3 3.0i
2007 - 2010 E83 X3 3.0i X3 3.0si

Show More Show Less

QuickJack - Corporate Logo
T#:3150961
Part#: 5210259
Ships in 4 Business Days
$ 30.00 USD
Free Shipping on orders $49 and up
Urethane rubber is an ultra-durable material that, compared to other rubber types and plastic, produces much less noise when it rolls across hard surfaces. Sold in sets of 4.
Corteco - Corporate Logo
T#:592060
Part#: 22113421296
Ships in 1 day
$ 161.99

This product was last offered at the strikethrough price on
08-13-2026

$ 126.99 USD
Free Shipping
$ 126.99 USD
Free Shipping
Keep your engine securely mounted
Corteco - Corporate Logo
T#:592081
Part#: 22313422956
Ships in 1 day
$ 67.99

This product was last offered at the strikethrough price on
08-13-2026

$ 49.87 USD
Free Shipping on orders $49 and up
$ 49.87 USD
Free Shipping on orders $49 and up
Rubber mount that secures the transfer case to the crossmember


BMW E36 Z3 Stage 1 Single Sprung Organic Clutch and Flywheel Kit ...
For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
XClutch - Corporate Logo
T#:24776628
Part#: XKBM24508-1A
Ships in 2 Business Days
$ 1,440.99 USD
Free Shipping
$ 1,440.99 USD
Free Shipping

BMW E36 Z3 Stage 1 Single Sprung Organic Clutch and Flywheel Kit from Turner Motorsport offers a high-performance solution with a lightweight design for improved throttle response and exceptional torque capacity. Ideal for high-performance racing applications, this kit provides the ultimate balance between drivability and power.

  • Lightweight Design: Enhances throttle response and overall driving dynamics.
  • High Torque Capacity: Supports up to 340 ft/lbs of torque, making it suitable for performance-driven applications.
  • Precision Engineering: Features the latest pressure plate design and friction material for optimal balance between drivability and performance.
  • Enhanced Pedal Feel: Carefully analyzed pivot point and diaphragm design ensure positive pedal feel and increased clamping force.

Specifications:

  • Clutch Disc Diameter: 9.448"
  • Clutch Disc Spline: 10
  • Disc Material: Organic
  • Disc Type: Sprung Solid
  • Input Shaft Diameter: 1.140625"
  • Flywheel Step: -3.8mm
  • Maximum Torque Capacity: 340 ft/lbs
  • Recommended Use: Street Use

Includes:

  • Single Mass Flywheel
  • 1 Sprung Organic Clutch Disc
  • Pressure Plate
  • Flywheel Bolts
  • Pressure Plate Bolts
  • Release Bearing
  • Alignment Tool
  • Clutch Spline Grease

XClutch performance upgrades are developed with over 30 years of experience and advanced testing facilities, offering top-notch engineering for both street and race applications.

Show More Show Less
Performance Tool - Corporate Logo
T#:1809155
Part#: W41021
Ships in 1 Business Day
$ 59.99 USD
Free Shipping on orders $49 and up
Ratchet style for easy adjustments.
Lisle - Corporate Logo
T#:5512194
Part#: 44210
Ships in 6 Business Days
$ 58.99 USD
Free Shipping on orders $49 and up
Allows Technicians to Compress the Emergency Brake Cable Spring with One Hand.

Power Steering Pulley - E83 E60 530i E60 525i
2X Entries Into Our F80 M3 Sweepstakes
URO Premium - Corporate Logo
T#:639431
Part#: 32427516848PRM
Ships in 1 Business Day
$ 65.99 USD
Free Shipping on orders $49 and up
Commonly damaged during pump removal due to a weak plastic design, the power steering pulley needs to be perfectly true and round to avoid throwing a belt. Replacement alleviates problems associated with a damaged pulley. Made of heavy duty aluminum vs OE plastic High-strength metal construction withstands brutal engine heat and vibration Durable surface finish resists corrosion Manufactured to OE power steering pump pulley dimensions for proper clearances and belt alignment As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Power Steering Pulley - D=116mm This item fits the following BMW Chassis: E83 X3
Show More Show Less

Performance Tool - Corporate Logo
T#:1809157
Part#: W54204
Ships in 1 Business Day
$ 27.99 USD
Free Shipping on orders $49 and up
Professional quality heavy duty construction for long service life.
Valvetronic Designs - Corporate Logo
T#:53149956
Part#: UVM.63MM.X2
Back Ordered
New Item
$ 599.99 USD
Free Shipping
$ 599.99 USD
Free Shipping
Unlock the true sound of your engine with the Valvetronic Designs universal valved muffler kit, a premium T304 stainless steel solution that offers the perfect balance between aggressive performance and neighborhood-friendly quiet at the push of a button.
Show More Show Less

WeatherTech - Corporate Logo
T#:401012
Part#: 42260
Ships in 2 Business Days
$ 142.99 USD
Free Shipping
$ 142.99 USD
Free Shipping

Cargo/Trunk Liners are custom fit laser measured cargo trunk mats designed to keep spills, dirt and grease away from your vehicle's interior and feature a raised lip that keeps spills contained in the liner.

Weathertech has made a name for themselves for having the highest-quality products with the best customer service they can offer. Proudly manufactured in America, they hold very tight engineering tolerances to allow a perfect fit in every application. With a product range from TechShade® (windshield sun shades), to trunk mats, and their world-famous laser measured floor liners, Weathertech has the products you're looking for!

Show More Show Less
Lemforder - Corporate Logo
T#:592146
Part#: 31103443128
Ships in 1-2 days
$ 185.69

This product was last offered at the strikethrough price on
07-08-2026

$ 159.99 USD
Free Shipping
$ 159.99 USD
Free Shipping
Does not include ball joint

Victor Reinz - Corporate Logo
T#:369954
Part#: 11127501304
In Stock at Vendor
$ 100.99

This product was last offered at the strikethrough price on
05-07-2026

$ 84.99 USD
Free Shipping on orders $49 and up
$ 84.99 USD
Free Shipping on orders $49 and up
Just the head gasket

Hawk - Corporate Logo
T#:25016
Part#: TMS25016
Back Ordered
$ 320.99 USD
Free Shipping
$ 320.99 USD
Free Shipping
The Hawk HT10 compound combines the high torque levels of the aggressive Hawk Blue with a revised friction compound that makes it easier to modulate and wears nicer on rotors. The HT10 remains consistent over a wide range of temps and can even work when cold. It's been a popular pad for racers looking for the performance of a Hawk Blue but is not as harsh on rotors.

Features and Characteristics:
+ very high torque performance
+ high temp range
+ up to 1300*F
+ mild abrasive metallic content does not require high heat to work
+ excellent modulation at high temps+ a 'friendly and easy' pad to use

These Front Hawk Blue Racing Brake Pads fit the following BMWs:
2001-2005 E46 BMW 330i 330Ci 330xi
2003-2006 E46 BMW M3
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2006-2008 Z4 BMW Z4 3.0si
2003-2009 Z4 BMW M Roadster & M Coupe (S54)
Show More Show Less
Prosport Performance - Corporate Logo
T#:389630
Part#: 216EVOAFRWB4.9
Ships in 1 Business Day
$ 241.99 USD
Free Shipping
$ 241.99 USD
Free Shipping

The EVO series from ProSport Gauges utilizes the latest Bosch wideband 02 sensor -5 wire heated LSU 4.9. This gauge offers a 10.0:1 to 20.0:1 AFR readings; the widest range on the market! Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • AFR digital Gauge
  • Bosch 4.9  5 wire heated O2 sensor
  • Weld in Bung
  • Instructions
  • Wiring harness(Gauge to O2 sensor) 10 feet long
  • Plug and play wiring harness
  • Decals
  • 0-5 volt output signal for data logging
Show More Show Less
Future Classic - Corporate Logo
T#:28038219
Part#: FCWHEELPIN1415
In Stock
$ 19.99 USD
Limited Qty Sale
Free Shipping
$ 19.99 USD
Limited Qty Sale
Free Shipping

For all of us who grew up with lug bolt-equipped cars, it can be a pain to re-install wheels. With no studs to guide the wheel onto the hub, you're left searching for that perfect alignment all while blindly trying to find a lug bolt to thread into place. Not a pleasant experience.

Future Classic's wheel hangers allow you to thread two guide pins into the hub to make re-installing wheels a breeze. We have created a guide pin for each of the most popular thread pitches, each size features a ridged body to prevent the wheel from falling off the hub once it is seated. A perfect accessory set for every tool kit.

Product Details:

Makes fitting lug bolt-equipped wheels much easier M14x1.5 thread pitch Aluminum construction Threaded end with ridged body to prevent wheel travel Sold as a set of two

Show More Show Less


Victor Reinz - Corporate Logo
T#:377137
Part#: 11340035853
Ships in 3 Business Days
$ 58.99 USD
Free Shipping on orders $49 and up
Stop burning oil at start-up
Clutch masters Stage 4 Clutch And Flywheel Kit- FX400
For vehicles with 6 speed 22 Spline Transmission and Production Date From 03/2003
Clutch Masters - Corporate Logo
T#:567196
Part#: 03CM3-HDCL-AK
Ships in 3 Business Days
$ 1,193.99 USD
$ 1,193.99 USD

Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.

  • FX400 (Stage 4)

  • High performance street system

  • Holding capacity 70% over stock

  • Heavy-Duty reinforced pressure plate

  • Hi-Leverage™ pressure ring design

  • Sprung hub/cushioned disc

  • Steel-backed Ceramic Lined Sprung Disc friction material

Fitment in following BMWs:This item fits the following BMWs: 
2003-2005 E46 BMW 330i 330ci  only for 6-speed manual transmission 

Show More Show Less