BMW Z Series E36/7 (1996-2002)

Rear Shock Mounts (RSM) HP Aluminum/Rubber - E30, E36, E46, Z3, Z4 (P...

T#:3666

Part#: JTD909

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

MOMO Steering Wheel Hub Adapter for E34, E36 3 series & Z3

T#:1610

Part#: 2008

In Stock

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

This hub adapter allows installation of a MOMO steering wheel (or any steering wheel that uses the same 6 bolt pattern / specs of a MOMO) to an E36 3 series and Z3. Includes everything pictured -- hub, slip ring, and hardware.

This is the most correct hub to use for any E36 Street car. It has the built-in copper contact riing for the horn and a tab for cancelling the turn signals. Because this hub was originally designed for an E36 without an airbag, it will require resistors t keep the SRS warning light off. Resistors are available at any local electronics store for just a few dollars. All that is needed for installation is some basic knowledge of wiring connections. This hub features a crushable base, not a solid piece, making it safer for street cars.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less

AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than h...

T#:340098

Part#: AEROCATCH

In Stock

$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD

Add to Wish List

Starting at $ 82.99 USD

Add to Wish List

As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.

Show More Show Less

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 ...

T#:389645

Part#: 192416-1J

In Stock

$ 380.00 USD

Add to Wish List

Qty

$ 380.00 USD

Add to Wish List

Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

330mm MOMO MOD.78 Steering Wheel

T#:301059

Part#: TMS301059

In Stock at Vendor

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

Tire Valve For TPMS Systems

T#:641919

Part#: AUL1SENSOR

In Stock

Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

Qty

Sale - Save 29%

$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use

Momo Race Airleather Shift Knob - Black

T#:388419

Part#: RACAIR

In Stock

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

Momo Race Airleather shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. High quality black perforated Endurance leather, and a silver anodized aluminum base. The Race knob favors over-hand or palm shifting as opposed to a two-finger grip. The shape rests comfortably in your palm and the soft leather is a pleasant touch. This knob is 7.3oz, heavier than most factory BMW or MOMO knobs. Comes with installation kit, ready to install.

Show More Show Less

Active Autowerke Rotrex Traction Fluid - One Liter

T#:397307

Part#: 12-032

Ships in 1 Business Day

$ 240.00 USD

Add to Wish List

Qty

$ 240.00 USD

Add to Wish List

Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).

Show More Show Less

Momo Shadow Shift Knob

T#:1787

Part#: SUBKCA

Ships on Sep 4, 2026

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

Momo Shadow Carbonlook/Leather shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. This knob features a carbon fiber style top and high quality black airleather with black anodized base. The Shadow knob favors over-palm shifting (the palm over the top of the knob). This knob is 4.5oz, slight heavier than stock. Comes with installation kit, ready to install.

Show More Show Less

MOMO START Racing seat - ALL BMW & MINI

T#:583211

Part#: 1070BLK

Ships on Aug 17, 2026

$ 485.00 USD

Add to Wish List

Qty

$ 485.00 USD

Add to Wish List

MOMO Racing seats have bee proven to not only keep you in place, but also keep you alive. FIA 8855-1999 certification, Adjustable padding configuration, and 5 belt openings mean this seat can accommodate a wide range of Motorsport. The Start seat has a classic shape with aggressive side bolstering and a more upright seating position than the Super Cup.

Show More Show Less

MOMO Mod.08 Steering Wheel - Black - 350mm Suede

T#:343229

Part#: R1908/35S

Ships on Aug 18, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable suede covering, and an ergonomic feel for comfort and control. An ideal size for most cars and drivers, and made by renowned MOMO Italy. This is a most attractive and low cost solution. Hub adapter required.

Show More Show Less

MOMO Steering Wheel Hub Adapter for E36, Z3

T#:1179

Part#: 2011

Ships on Oct 15, 2026

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

This hub adapter allows installation of a MOMO steering wheel (or any steering wheel that uses the same 6 bolt pattern / specs of a MOMO) to an E36 3 series and Z3. Includes everything pictured -- hub, slip ring, and hardware.

This hub is best suited to a track-only car. It does not have the brass contact ring for the horn or a turn signal cancellation feature (in some cars these are not needed - the horn and turn signals are wired into the column). It does not have crushable hub.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less

Autel Universal Rubber TPMS Sensor - Set Of Four

T#:3529121

Part#: AUL1SENSORKT

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 1 Business Day

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

MOMO MOD.78 Suede Steering Wheel - 330mm & 350mm

T#:338958

Part#: TMS1350

In Stock at Vendor

Starting at $ 279.00 USD

Add to Wish List

Starting at $ 279.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable and slip resistant black suede covering, and thumb recesses for comfort and control.

Show More Show Less

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

AutoLink AL529HD

T#:2914129

Part#: AL529HD

Ships in 6 Business Days

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

Autel’s latest member of its code reader family of tools, the AL529HD can not only diagnose OBDII/EOBD-compatible vehicles but also heavy duty vehicles utilizing SAE-J1939 and SAE-J1708 protocols.

Adjustable Rear Camber/Toe Bushings

T#:582353

Part#: 192026G

In Stock

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Replacement Bushings for Rear Shock Tower Mounts

T#:1386

Part#: JTD909-75-KIT

Ships on Aug 11, 2026

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).

Show More Show Less

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36...

T#:389647

Part#: 192416-2L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36...

T#:389646

Part#: 192416-3L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

MOMO Tuner Steering Wheel - Black Spoke 320mm

T#:388375

Part#: TUN32BK0B

Special Order: No Guaranteed ETA

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control. An ideal size for most cars and drivers, and made by renowned MOMO Italy. This is a most attractive and low cost solution. Hub adapter required.

Show More Show Less

MOMO Automatico Shift Knob - Leather/Chrome

T#:388399

Part#: AUTOBK1

Special Order: No Guaranteed ETA

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

MOMO Automatico leather shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. High quality black Endurance leather with bright chrome base. The Automatico knob favors over-palm shifting (the palm over the top of the knob) or pistol grip shifting. This knob is 9.8oz, heavier than most MOMO or factory BMW knobs. Comes with installation kit, ready to install.

Show More Show Less

MOMO Prototipo Steering Wheel - Silver - 350mm

T#:388372

Part#: PRO35BK0S

Special Order: No Guaranteed ETA

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Combat Evo Shift Knob - Red

T#:388410

Part#: CTERED

Special Order: No Guaranteed ETA

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

Momo Combat Anatomic Leather shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. High quality black Endurance leather, red stitching, red insert, with black anodized base. The Combat knob favors two-finger or pistol grip shifting. The shape allows two or more fingers to rest under the head of the knob - a more ergonomic shape than the factory shift knobs. This knob is 6.2oz, slightly heavier than the ZHP knob. Comes with installation kit, ready to install.

Show More Show Less

MOMO Racing Prototipo 6C Steering Wheel - Black Leather Grip With Car...

T#:14122757

Part#: PRO35BK1C

Special Order: No Guaranteed ETA

$ 569.00 USD

Add to Wish List

Qty

$ 569.00 USD

Add to Wish List

MOMO Racing Prototipo 6C carbon fiber steering wheel feature spokes wrapped in genuine carbon fiber with smooth premium quality leather for the grip. MOMO individually selects hides from only the best suppliers to ensure they meet their high standards.

Show More Show Less

MOMO Mod.07 Steering Wheel

T#:339964

Part#: TMS21537

Ships on Aug 27, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

MOMO Mod 07 steering wheel is inspired by classic rally cars. Featuring a deep 70mm dish layout to put the wheel rim closer to the driver. Having the wheel closer to the driver means better leverage for quick steering corrections The Mod 07 has a standard 30mm round rim in either leather or suede.

Show More Show Less

MOMO Nero Shift Knob - Black

T#:388415

Part#: NERBK1

Special Order: No Guaranteed ETA

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

Momo Nero shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. High quality black Top Grain leather on the lower half, black enamel insert, and a rubberized top piece with the MOMO logo. The Nero knob favors over-hand or palm shifting as opposed to a two-finger grip. The shape rests comfortably in your palm and the soft leather is a pleasant touch. This knob is 7.3oz, heavier than most factory BMW or MOMO knobs. Comes with installation kit, ready to install.

Show More Show Less

MOMO Nero Shift Knob - Short

T#:598528

Part#: MOM-NERBK1-R

Special Order: No Guaranteed ETA

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

MOMO Mod.88 Steering Wheel - Black - 350mm

T#:1863

Part#: TMS1863

Special Order: No Guaranteed ETA

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

MOMO Mod.88 Steering Wheel for track/competition use. An evolution to the hugely popular Mod 78 wheel. This wheel features a flat bottom for more leg clearance and better grip. It has a slightly oblong 350mm diameter rim with black suede covering.

Show More Show Less

MOMO Team Steering Wheel

T#:390888

Part#: TEA-MOMO

Ships on Aug 27, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Monte Carlo Steering Wheel - Red - 350mm

T#:388364

Part#: MCL35BK3B

Special Order: No Guaranteed ETA

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Tuner Steering Wheel

T#:340479

Part#: TUN35BK0B

Ships on Aug 27, 2026

Starting at $ 239.00 USD

Add to Wish List

Starting at $ 239.00 USD

Add to Wish List

The MOMO Tuner steering wheels combine the best features of all of the MOMO wheels. Stylish and functional, they give an immediate upgrade in steering feel and response while upgrading the aesthetics of your interior at the same time.

Show More Show Less

MOMO Daytona Racing Seat - All BMW

T#:585740

Part#: 1073KIT

Ships on Aug 27, 2026

Starting at $ 775.00 USD

Add to Wish List

Starting at $ 775.00 USD

Add to Wish List

MOMO Racing seats have bee proven to not only keep you in place, but also keep you alive. FIA 8855-1999 certification, Adjustable padding configuration, and 5 belt openings mean this seat can accommodate a wide range of Motorsport.

Show More Show Less

MOMO Prototipo Steering Wheel - Black - 350mm

T#:1040

Part#: PRO35BK2BLACK

Special Order: No Guaranteed ETA

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

MOMO Prototipo Black steering wheel. 350mm diameter (13.8 inches). Soft black leather rim with black anodized aluminum spokes. A beautiful addition to any interior. Perfect for vintage BMWs and Porsches because of its period-correct look.

Wheel hub adapter required.

Show More Show Less

MOMO Prototipo Steering Wheel

T#:390875

Part#: PRO35BK

Ships on Sep 3, 2026

Starting at $ 269.00 USD

Add to Wish List

Starting at $ 269.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Monte Carlo Steering Wheel - Black - 350mm

T#:1864

Part#: MCL35BK1B

Special Order: No Guaranteed ETA

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

MOMO Monte Carlo Steering Wheel. 350mm diameter (13.8 inches). Black leather rim with black anodized center. A beautiful and classic steering wheel upgrade.

Requires a wheel hub adapter, choose one below.

Show More Show Less

MOMO Monte Carlo Steering Wheel

T#:390872

Part#: MCL35BKXB

Ships on Aug 27, 2026

Starting at $ 239.00 USD

Add to Wish List

Starting at $ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. The MOMO Monte Carlo is a seminal classic MOMO wheel design. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

APR Black Valve Stem Caps - Pack of 4

Call In Or Chat For Best Price!
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:22987107

Part#: MS100197

In Stock

11% off MSRP $ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD

Add to Wish List

Qty

11% off MSRP

$ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD

Add to Wish List

APR Black Valve Stem Caps are a stylish and functional upgrade for your vehicle's wheels. Sold as a set of four, these high-quality aluminum caps feature an engraved APR logo on each cap. Designed to add a touch of customization to your vehicle, they also serve a practical purpose.

Premium Quality: Made from durable aluminum for long-lasting performance.
Enhanced Aesthetics: Features an engraved APR logo for a sleek and stylish look.
Functional Design: Helps protect valve stems from dirt and moisture.
Easy Installation: Simple to install and compatible with most standard valve stems.

Upgrade your vehicle with APR Black Valve Stem Caps to enhance both style and functionality.

Show More Show Less

APR Valve Stem Caps - Set Of 4 - Silver

Call In Or Chat For Best Price!

T#:31125602

Part#: MS100178

In Stock

11% off MSRP $ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD

Add to Wish List

Qty

11% off MSRP

$ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD

Add to Wish List

APR Valve Stem Caps - Set Of 4 - Silver are a stylish and functional upgrade for any vehicle. This set includes four high-quality aluminum valve stem caps, each engraved with the distinctive APR logo. These caps are designed to enhance the appearance of your wheels while providing durability and reliability.

Stylish Appearance: Each cap features a sleek silver finish and an engraved APR logo, adding a touch of elegance to your vehicle.
Durable Construction: Made from high-quality aluminum, these valve stem caps are built to withstand harsh conditions and resist corrosion.
Easy Installation: Simple to install and compatible with most standard valve stems.
Enhanced Wheel Aesthetics: Upgrades the look of your wheels with a subtle yet impactful design.
Functional Protection: Helps protect valve stems from dirt and moisture, ensuring consistent performance.

This set of valve stem caps is an excellent choice for anyone looking to add a refined touch to their vehicle's wheels.

Show More Show Less

APR Valve Stem Caps - Set Of 4 - Gunmetal

Call In Or Chat For Best Price!

T#:31092523

Part#: MS100179

In Stock

11% off MSRP $ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD

Add to Wish List

Qty

11% off MSRP

$ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD

Add to Wish List

APR Valve Stem Caps - Set Of 4 - Gunmetal offer a stylish and functional upgrade for any vehicle. These high-quality aluminum valve stem caps come in a sleek gunmetal finish and feature an engraved APR logo, which adds a touch of sophistication to your wheels.

Material: Made from durable aluminum for long-lasting performance
Design: Engraved APR logo adds a distinctive look
Finish: Gunmetal color enhances the visual appeal of your wheels
Set Includes: 4 valve stem caps for a complete upgrade
Compatibility: Fits most standard valve stems

These APR Valve Stem Caps are designed to provide both aesthetics and durability, making them a great choice for enhancing your vehicle's style.

Show More Show Less

Maxi TPMS Kit With Sensors

T#:5663676

Part#: AULTS508K1

Ships in 6 Business Days

$ 739.99 USD

Add to Wish List

Qty

$ 739.99 USD

Add to Wish List

Pinpoint and replace bad TPMS Sensors

MaxiBAS BT506

T#:2914145

Part#: BT506

Ships in 6 Business Days

$ 402.99 USD

Add to Wish List

Qty

$ 402.99 USD

Add to Wish List

The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b

Show More Show Less

MaxiSys Ultra

T#:2914136

Part#: MSULTRA

Ships in 6 Business Days

$ 12,306.99 USD

Add to Wish List

Qty

$ 12,306.99 USD

Add to Wish List

The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence.

Maxivideo MV400

T#:2914140

Part#: MV400-55

Ships in 6 Business Days

$ 405.99 USD

Add to Wish List

Qty

$ 405.99 USD

Add to Wish List

This premier Autel MaxiVideo MV400 digital videoscope is an ideal tool for examining difficult- to- reach areas normally hidden from sight.

Autel MaxiTPMS TS508WFK-1 TPMS Diagnostic Tool

T#:40782369

Part#: AUL-TS508WFK-1

Ships in 6 Business Days

$ 419.99 USD

Add to Wish List

Qty

$ 419.99 USD

Add to Wish List

The TS508WFK-1 is a TPMS service tool that features Quick and Advance modes of TPMS service and a TPMS status screen. It can read/activate/relearn all known sensors, has 4 methods of MX-Sensor programming, and performs placard value resets on supported vehicles. This scanner displays on-tool MX-Sensor relearn procedures including OBDII and can do key fob signal tests. The TS508WFK-1 includes an OBDII cable, a 1-year tool warranty, and free lifetime software updates are available with purchase.

Show More Show Less

Seatbelt 6-point Race Harness Receptacles - Macht Schnell

T#:338507

Part#: 79.20.150K

Ships on Aug 20, 2026

Starting at $ 174.00 USD

Add to Wish List

Starting at $ 174.00 USD

Add to Wish List

Many racing series and event organizers are requiring 5 or 6-point harnesses in their events now. Attaching the anchor points to the seat base is a desired alternative to drilling holes in your floor and carpet*. This set includes the 6-point anchor to attach to the Macht Schnell floor mount as well as side attachments for either a bolt-in or snap-in harness.

* - note that most racing harness manufacturers will advise that drilling through the floor is the best method for mounting harnesses. This allows you to locate the mount in the ideal location and angle to fit your driving position. The proper installation is paramount to ensure the harness works correctly in an impact.

Sold per seat.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

MOMO Mod.Drift Steering Wheel - Black Suede - 330mm

T#:31622637

Part#: R1907/33S

Special Order: No Guaranteed ETA

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Momo Prototipo - 370mm - Black Leather/Anodized Spoke/White Stitching...

T#:8294094

Part#: MO-PRO37BK2B

Special Order: No Guaranteed ETA

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

Features: 370mm diameter Rich black leather Brushed black anodized spoke finish 39mm dish White stitching Classic MOMO logo Pre-drilled 6 hole design that will work with MOMO and other compatible 6 hole hub steering wheel adapters. Prototipo is the ideal choice for classic vehicles of all generations. At the NEW 370mm diameter, the unique, timeless design is the perfect choice for both long driving trips or a performance GT car. The iconic holes in your choice of black or silver spokes make this black leather-gripped steering wheel lighter to handle. The hand-sewn parallel white stitching runs the perimeter of the entire steering wheel. The laser-engraved "Prototipo" on the spokes and yellow MOMO logo on the embossed horn button provide the ultimate finishing details of this classic MOMO steering wheel.

Show More Show Less

MOMO Monte Carlo Steering Wheel - Red - 320mm

T#:388365

Part#: MCL32BK3B

Special Order: No Guaranteed ETA

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control. An ideal size for most cars and drivers, and made by renowned MOMO Italy. This is a most attractive and low cost solution. Hub adapter required.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Z3 (1996-2002)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results