BMW Z3 (1996-2002)

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

WHEEL STORAGE RACK:

Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

Fits up to 8½" wide wheels, depending on offset

TIRE STACK COVER:

This tire stack by Schwaben is the solution to keeping your tires and wheels clean while in storage.

• Works with 4 tire stacks and works great with our Schwaben Wheel Tree (ES2710754).
• Durable 150D coated material is rated for outdoor use.
• Cover is a large 32" wide X 46" tall.
• Fitted with a long 29" zipper up the side for easy installation and removal.
• Nylon draw string at the bottom allows for a good snug fit.
• Includes a handy storage pouch if not in use.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Removes and installs control arm bushings while leaving the control arm on the car.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Unleash Hidden Power with the Shark Injector for Your BMW

The Shark Injector is the ultimate solution for effortlessly boosting power and torque in your BMW. This software, meticulously dyno-tuned by BMW tuning legend Jim Conforti, is engineered to optimize high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. It delivers an elevated level of performance without compromising your BMW's integrity, making it the easiest way to unlock untapped potential.

Key Features:

• Dyno-tuned by BMW tuning legend Jim Conforti
• Raises the rev limit for increased performance
• Fine-tuned fuel and spark maps for superior engine responsiveness
• Easy plug-and-play installation with detailed instructions
• Compatible with high-octane pump gas (91+)

The Shark Injector is meticulously designed to safely improve performance while enhancing driveability and responsiveness. Installation is a breeze - simply connect a battery charger to ensure your car battery has backup power, plug in your Shark Injector, and initiate the process with the push of a button. While the Shark Injector replaces parts of the stock software, it also stores the original data in the unit for future use if needed. When the LED changes from red to green, you're ready to experience your BMW's enhanced performance.

The BMW M52TU engine is already finely tuned, but there are still ample opportunities to elevate your driving experience. Jim Conforti has expertly fine-tuned this Shark Injector to enhance various aspects, from fuel maps and ignition timing to VANOS operation. The result is an impressive addition of 15 HP and 12 lb/ft of torque. Engine response is significantly improved, and the rev limit is raised to 7,000 RPM. Additionally, the speed limiter is removed, unlocking your BMW's full potential. Enjoy a vastly improved driving experience, especially during part-throttle and wide-open throttle acceleration.

Performance Gains:

• +15 HP at 6,200 RPM
• +12 torque @ 3,500 RPM
• Rev limit raised to 7,000 RPM

It's important to note that Shark Injector software is ONLY compatible with NORTH AMERICAN SPEC BMWs and is not designed for EURO-SPEC BMWs.

EXTRACTOR:

The Schwaben 6.5 Liter Extractor empowers you with swift, hand-operated fluid extraction. Complete with two tubes of varying diameters to suit your unique needs, this system's vacuum release button guarantees seamless operation. Clearing 6.5 Liters (6.8 qts.) of fluid in minutes, it preserves a spotless, oil-free workspace. Its ingeniously designed pour spout ensures mess-free fluid disposal.

Features:

• Stability First: Equipped with a flip-out foot for steady usage, delivering precise extraction.
• Organized Efficiency: Integrated hose storage streamlines your extraction process.
• Perfectly Sized: A 41" main tube (3/8" OD) and two 35" extension tubes (1/4" and 3/16" OD) ensure versatility across applications.
• Beyond Extraction: It doubles as a brake bleeder with the optional ES3248036 Brake Bleeder Hose.
• LIFETIME REPLACEMENT: Like almost all Schwaben tools, this fluid extractor is backed by our lifetime replacement program should anything go wrong!

ADAPTER:

This adapter hose allows a quick and easy suction thru the bleeder screw. This hose has included shut off valve in hose.  This will improve your extractor capabilities and make it even more of an all-in-one tool!

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

3/8-INCH DRIVE LONG FLEX HEAD RATCHET:

This professional quality flex ratchet features a fine satin finish designed for durability and easy clean up. Special designed 72T gear mechanism uses only 5 degree of handle movement between gears. This is  especially useful in tight areas. Flex head has 7 detent positions in a 180 degree swing. Push button release holds socket tight until you are ready to release.  No more dropped sockets. Ratchet is a full 290mm ( 11") long for extra leverage.

Part of our LIFETIME REPLACEMENT PROGRAM

1/2-INCH DRIVE LONG FLEX HEAD RATCHET:

This 1/2" drive flex head ratchet features a fine satin finish designed for durability and easy clean up. Special designed 72T gear mechanism uses only 5 degree of handle movement between gears. This is  especially useful in tight areas. Flex head has 9 detent positions in a 180 degree swing. Push button release holds socket tight until you are ready to release.  No more dropped sockets. 

Part of our LIFETIME REPLACEMENT program

Stage 3 Performance Software for E36 M3, MZ3 (HFM/Cam Kit) (stock S52 manifold)

Conforti Shark Injector performance software tuned for our Stage 3 OBD2 package: Schrick camshafts, "24lb" injectors, Porsche 3.5" HFM, and intake. This software is tuned around the stock S52 intake manifold. For keeping the most useable torque we recommend using the stock manifold over the M50 part.

With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.

Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
 

Shark Injector Installation Instructions

(click to expand)

Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.

Shark Injector FAQ

(click to expand)

Shark Injector FAQ

This item fits the following BMWs:
1996-1999 E36 BMW M3

You may be able to upgrade the Shark Injector file to another version to better meet your tuning needs. Depending on the model we may have better tunes for things such as intakes, larger air sensors, camshafts, headers, and others. For a small fee the current Shark Injector tune can be removed and a new file added instead (the original Shark file you were using would no longer be available). To do this, we need the car restored to stock settings with the current Shark Injector and then returned to us (updating via USB is not yet available). Sharks that were not Restored to stock cannot be upgraded and the unit will be returned to you (at your expense). We also perform other work on the Shark Injector while it is here, including diagnostic tests and re-packaging with the most current instructions. The Shark that you get back is virtually new and ready to be reinstalled!

To get started, review the catalog of current Shark Injector files for one that better matches your tuning spec.
1. Enter the new tuning file in the form below. Include any other relevant information.
2. Click the Update Price or Add To Cart button.
3. Complete the online transaction with your address and payment information.
4. A Turner Motorsport sales rep will contact you after your order has been submitted. Do not send in your Shark Injector until someone has contacted you with a reference number and return shipping address.

Turn-around time for upgrades is typically the same day we receive it. UPS Ground is the normal return shipping method unless you specify faster shipping on your order. 

Helpful Links:

• Shark Injector File List - listing of all Shark Injector files by vehicle model. Select a file from this list to upgrade to.
• Shipping Instructions - specific instructions for packaging and shipping. Also includes a contact form to include when you send back your Shark.
• Emissions Waiver - some tunes require this emissions/smog waiver before we can program the new file to your Shark. These are noted in the catalog listing in the links above. Print and include this Waiver when you send in your Shark.

Shark Injector installation instructions

Stage 4 Performance Software for E36 M3 (Turner HFM + Cams + Headers Kit)

Conforti Shark Injector performance software tuned for our Stage 4 OBD2 package: Schrick camshafts, performance headers, "24lb" injectors, Porsche 809 3.5" HFM, and intake. This software is tuned around the stock S52 intake manifold. For keeping the most useable torque we recommend using the stock manifold over the M50 part.

With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.

Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
Performance Headers (TMS Shorty Headers or similar)
 

Shark Injector Installation Instructions

(click to expand)

Shark Injector installation instructions 
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.

Shark Injector FAQ

(click to expand)

Shark Injector FAQ

This item fits the following BMWs:
1996-1999 E36 BMW M3

Elevate your BMW's performance effortlessly with the Shark Injector—the ultimate solution for adding power and torque. Engineered by BMW tuning legend Jim Conforti, this software is optimized for high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. Unleash the potential of your BMW with these features:

• Safe performance improvement without drawbacks
• Raised rev limit for heightened performance
• Fine-tuned fuel and spark maps for superior factory performance
• Plug-and-play solution with easy installation in approximately an hour
• Detailed instructions provided for hassle-free setup
• Compatible with "24lb" injectors, Porsche 809 3.5" HFM (0 280 217 809), Schrick camshafts, and M50 intake manifold
• Exclusive compatibility with NORTH AMERICAN SPEC BMWs

Installation is a breeze—connect a battery charger, plug in your Shark Injector, and start the process. This innovative solution replaces stock software, storing original data for future use. When the LED turns from red to green, your BMW is ready to deliver enhanced performance.

Aluminum 3-Ton Jack Stands With Mechanic's Folding Ground Pad - Set Of 2 are designed for exceptional performance and convenience in automotive maintenance. These lightweight aluminum jack stands provide robust support, while the mechanic's folding ground pad ensures comfort during vehicle work.

• Lightweight Construction: Each jack stand weighs only 4.7 lbs, making them easy to handle without sacrificing strength.
• Durable Design: All-aluminum construction with heavy-duty flanged bases ensures stability and safety for loads up to 3 tons.
• Adjustable Heights: Features 6 locking positions with a minimum height of 10.6 inches and a maximum height of 15.4 inches.
• Secure Load: Extra heavy-duty load pin with a posi lock ball mechanism keeps the pin securely in place.
• Large Base: Equipped with a 7-inch diameter base for enhanced stability.
• Mechanic’s Ground Pad: Provides comfort with high-density foam and a heavy-duty cover that resists oils and fluids. Measures 17"W x 47"L when unfolded and includes built-in carrying handles.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Experience Peak Performance with Shark Injector for BMW

Unleash the full potential of your BMW's power and torque effortlessly with the Shark Injector, your ultimate solution for a performance boost. Expertly dyno-tuned by BMW legend Jim Conforti, this software is meticulously crafted for high-octane (91+) pump gas, prioritizing mid-range torque and high-RPM horsepower. Explore the benefits:

• Optimized Performance: Fine-tuned fuel and spark maps ensure your BMW outperforms its factory state.
• Enhanced Driveability: Safely improves performance while maintaining driveability and responsiveness.
• Simple Installation: Plug-and-play solution with easy installation in approximately one hour.
• Battery Charger Compatibility: Easily install by plugging in a battery charger for backup power.
• Original Data Preservation: Shark Injector retains original data, ensuring flexibility for future use.

Revitalize your BMW's performance hassle-free with Shark Injector's expertly crafted software.

Stage 3+ Performance Software for E36 328i/is/ic, E39 528i, and Z3 2.8 (M50 Manifold + M3 Cam Kit)

Conforti Shark Injector performance software tuned for the awesome OBD2 package: M50 manifold, M3 S52 camshafts, and intake. This software makes full use of the benefits of the M50 manifold when used with cams and intake. Without the software, you're not getting the full effect of these upgrades in the upper rev range. The stock software, or a regular Shark Injector, is tuned for low-end torque using the stock manifold and cams. It's like a marathon runner in a 40-yard dash: he'll put in a good effort but won't be the quickest! Special attention was paid to the low-end and mid-range too so that torque was not lost with the M50 manifold.

With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.

Required:
E36 M3 MZ3 S52 stock camshafts
M50 intake manifold
 

Shark Injector Installation Instructions

(click to expand)

Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.

Shark Injector FAQ

(click to expand)

Shark Injector FAQ

This item fits the following BMWs:
1996-1999 E36 BMW 328i 328ic 328is
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW 2.8

• Horsepower and torque gains
• Faster and smoother throttle response
• Top speed limiter removed
• Optional convenience features
• Extremely easy to install/uninstall
• Reversible and reusable

Performance software is a must-have upgrade on your MZ3 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

The MZ3 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. Choose between a stock or raised 8,100 RPM rev limit. The top speed limiter is removed. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine.

The Shark Injector plugs into the diagnostic port inside the Z3 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

MZ3 Dyno
Power and Torque Gains
Stock: 253.2 rear wheel Horsepower, 223.1 rear wheel Torque
Sharked: 266.1 rear wheel Horsepower, 229.8 rear wheel Torque
Peak Gain 12.9 HP and 6.7 Torque @ the wheels.
A Max gain of 14.0 lb/ft rear wheel torque @ 4340 rpm

This item fits the following BMWs:
2001-2002 Z3 BMW Z3 M Roadster M Coupe (US model only)

COMBINATION WRENCH SET:

Quality combination wrenches are a must when doing any kind of automotive work.

Features:

• A complete set from 8 to 19 mm 
• Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
• Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
• Includes sturdy wrench holder for easy storage

SCRAPER, HOOK, AND PICK SET:

Some of the most popular uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips. This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

• 3" Blade MINI Awl, 90°, Hook, and Curve
• 6" Blade Awl, 90°, Hook, and Curve
• 6" x 1" wide scraper

Everything in this kit comes with LIFETIME REPLACEMENT.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.