Showing 8728 results for ""

Lightweight flywheel and upgraded clutch kit for improved throttle response, acceleration, and clutch feel - the perfect setup for daily-driven vehicles with up to 400 Ft/lbs of torque.

This performance clutch and flywheel kit utilizes an upgraded ECS E34 M5 clutch kit with their in-house engineered flywheel to fit all M5x and S5x motors with a 5-speed transmission. By eliminating the dual-mass flywheel and replacing it with a single-mass you are able to eliminate the slack and extra weight of the flywheel for a quicker throttle response and acceleration. Their upgraded clutch kit utilizes all the best features of the original M5 clutch with an upgraded pressure plate and clutch disc, with the new clutch you have a better, more engaged clutch pedal feel, engagement, and longevity.

Whether you're replacing a worn-out clutch or upgrading for increased power handling, this E34 M5 clutch and flywheel kit offers a reliable solution for enhanced pedal feel, power capacity, and overall driving satisfaction.

Paired with a modified geometry flywheel, the E34 M5 style clutch is ideally suited for most E36, E46, and others using the same powertrain. It checks all the boxes for essential clutch replacement features. While some aftermarket options may address slipping issues and worn-out clutches, they often sacrifice pedal feel, providing little to no resistance. A soft clutch not only kills the driving experience of your BMW but also reduces confidence when pushing the car to its limits.

On the contrary, you might be in the market for an upgraded clutch to handle your modified engine/forced induction builds. You go from an OE or aftermarket clutch option that has a lackluster and soft pedal feel to the complete opposite side of the spectrum, a very stiff clutch that grabs like an on-and-off switch making the clutch a pain almost undrivable on the street resulting in your favorite car turning into your least favorite car to drive.

The E34 M5 clutch and flywheel kit balances performance with practicality, ensuring a satisfying driving experience whether you're maintaining your BMW or preparing it for increased power demands.

Kit Contents:

Single Mass Flywheel - E34 M5 Clutch Geometry
Performance Clutch Disc and Pressure plate
Throw-out Bearing
Pilot Bearing
Clutch Alignment Tool
Flywheel Bolts - Qty 8
Pressure Plate Botls - Qty 6
Clutch features:

Torque Capacity (Crankshaft):
400 Ft / Lbs
Clutch Disc:
240mm Full face, performance organic friction material with integrated copper for enhanced heat dissipation and a long component life
OE-like friction backing plate design for smooth engagement with dual-stage damping springs to reduce gear noise and driveline chatter, and for smooth engagement
Pressure Plate
Increased clamp force over OEM, rated at 1,729lbs of pressure
Flywheel features:

Eliminates factory dual mass
Improved throttle response
Improved acceleration
Hardened 4140 Chromoly Steel
Designed for use with any E34 M5 pressure plate and clutch for OE-type clutch feel
Weighs in at just 16.5lbs vs Factory Dual Mass - 25.3 lbs
SFI certified
Fitment:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (5-speed)
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i (5-speed)

Pair with T#363031 or any flywheel designed to be used with the E34 M5 clutch.

Upgraded clutch kit to be used with E34 M5 architecture flywheels. Designed for factory and upgraded street car applications to handle up to 375 Ft/lbs at the crank.

Whether you're replacing a worn-out clutch or upgrading for increased power handling, this E34 M5 clutch kit offers a reliable solution for enhanced pedal feel, power capacity, and overall driving satisfaction.

Paired with a modified geometry flywheel, the E34 M5 style clutch is ideally suited for most E36, E46, and others using the same powertrain. It checks all the boxes for essential clutch replacement features. While some aftermarket options may address slipping issues and worn-out clutches, they often sacrifice pedal feel, providing little to no resistance. A soft clutch not only kills the driving experience of your BMW but also reduces confidence when pushing the car to its limits.

On the contrary, you might be in the market for an upgraded clutch to handle your modified engine/forced induction builds. You go from an OE or aftermarket clutch option that has a lackluster and soft pedal feel to the complete opposite side of the spectrum, a very stiff clutch that grabs like an on-and-off switch making the clutch a pain almost undrivable on the street resulting in your favorite car turning into your least favorite car to drive.

The E34 M5 clutch kit balances performance with practicality, ensuring a satisfying driving experience whether you're maintaining your BMW or preparing it for increased power demands.

Kit Contents:

Performance Clutch Disc and Pressure plate
Throw-out Bearing
Clutch Alignment Tool
Pilot Bearing
Clutch features:

Torque Capacity (Crankshaft):
375 Ft / Lbs
Clutch Disc:
240mm Full face, performance organic friction material with integrated copper for enhanced heat dissipation and a long component life
OE-like friction backing plate design for smooth engagement with dual-stage damping springs to reduce gear noise and driveline chatter, and for smooth engagement
Pressure Plate:
Increased clamp force over OEM, rated at 1,729lbs of pressure
Throw-out Bearing:
OE spec for ease of installation and reliable operation
Clutch Alignment Tool:
BMW small 10 spline design, made for perfect fitment into the crank bore
Perfect clutch disc spline and size, easy removal with pull tab
​Not all aftermarket clutch kits include this proper alignment tool! We ensured you received the proper tool for trouble-free installation!
Fitment:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (5-speed)
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i (5-speed)
1977-1989 E24 BMW M6
1982-1988 E28 BMW M5
1987-1995 E34 BMW M5

ECS Performance Clutch and Flywheel Kit – Built for Precision and Power

Step up your BMW’s driving experience with the ECS Performance Clutch and Flywheel Kit, engineered for drivers who demand improved throttle response, stronger engagement, and seamless power delivery. Featuring a modified E34 M5 clutch setup paired with an expertly crafted single-mass flywheel, this kit is designed to enhance both the feel and performance of M5x and S5x engines with 5-speed transmissions.

The single-mass flywheel replaces the bulky, factory dual-mass version, significantly reducing rotational weight for quicker throttle response and sharper acceleration. This kit retains the robustness of the M5 clutch but ups the ante with a reinforced pressure plate and clutch disc, giving you not only increased power handling but also a highly responsive pedal feel for precision control.

Perfect for both clutch replacements and power upgrades, the ECS Performance Clutch and Flywheel Kit transforms your driving experience without sacrificing pedal feel or adding unwanted stiffness. Say goodbye to spongy or overly rigid aftermarket options—this setup strikes the balance that enthusiasts crave, giving you both reliability and satisfaction behind the wheel.

Kit Contents:

Single Mass Flywheel with E34 M5 Clutch Geometry Upgraded Clutch Disc and Pressure Plate Throw-out Bearing and Pilot Bearing Clutch Alignment Tool Flywheel and Pressure Plate Bolts Clutch Highlights:

Torque Capacity: 375 ft-lbs at the crank 240mm Performance Clutch Disc: Organic friction material with copper for heat dissipation and durability OE-Like Backing Plate: Provides smooth engagement and reduced driveline chatter Reinforced Pressure Plate: Holds 1,729 lbs of pressure for a firm, predictable pedal Flywheel Highlights:

Single-Mass Construction: Replaces the heavy factory dual-mass flywheel 4140 Chromoly Steel: Lightweight yet robust (16.5 lbs vs. factory 25.3 lbs) Enhanced Response and Acceleration SFI Certified Developed with Precision: Engineered and quality-tested by ECS Tuning in our Ohio facility, this kit reflects the best in performance engineering. Utilizing advanced tools like FARO laser scanning and 3D CAD modeling, we ensure precision fitment, durability, and consistent results for every driver.

Polyurethane Transmission Mount Set - Street Performance

Your transmission mounts are the backbone of your drivetrain. Stock rubber mounts often degrade quickly, leading to excess movement, mis-shifts, and, in some cases, even chassis damage. ECS Tuning’s Street Performance Polyurethane Transmission Mount Set offers an upgraded solution built for street and track performance alike.

Constructed from high-quality polyurethane and 304 stainless steel, these mounts are crafted to withstand the demands of high-torque and forced-induction setups, minimizing deflection and giving you more direct power delivery. With a 70A durometer rating, these mounts offer the best of both worlds—stiff enough to handle aggressive driving but still comfortable for daily commutes. For track-focused builds, we also offer a stiffer 80A version (sold separately).

Key Features:

Improved Stability: Reduced transmission movement for fewer mis-shifts and over-revs Polyurethane Construction: Stronger than rubber, with excellent oil and water resistance Engaging Driving Experience: A more connected feel without excessive vibration Dual Options: Choose Street (70A) or Race (80A) to match your driving style Durable Design: Mechanical interlock feature for high-stress applications Pair your new clutch and flywheel kit with these premium mounts for an unparalleled driving experience. Plus, our DIY guide makes installation easy—ECS Tuning has you covered from start to finish!