Showing 8739 results for ""

Commonly used when replacing axle shaft boots.

Features:

• Crimp and flatten design
• Produces a clean factory style crimp
• Limited Lifetime Warranty

Schwaben has a solution to those hard to reach hose clamps with 8mm hex nuts. This 8mm driver features an overall length of 10-1/2" and a flex shaft length of 6". The ergonomic handle features a non-slip grip for when your hands are oily or wet.

8mm/ 5/16" are commonly found on aftermarket hose clamps. 

The Superior Bass Sports Horn Kit 330Hz + 400Hz 112Db is designed to make sure your presence is known with powerful, attention-grabbing sound. These high-performance sports horns feature:

• Impressive Loudness: Delivers a powerful 112 decibels, ensuring you’re heard in any situation.
• Dual Frequency: Includes 330Hz and 400Hz horns for a dynamic and distinct sound.
• Lightweight & Durable: Constructed for easy installation with weather-resistant covers, built to withstand the elements.
• Easy Installation: Quick and straightforward to install, enhancing vehicle safety with minimal effort.

The kit is a must-have for anyone looking to enhance their vehicle’s horn performance and visibility on the road.

BMW M52 DSC Pressure Sensor is an essential component attached to the brake master cylinder, designed to monitor and ensure optimal brake system performance in BMW vehicles. This high-quality sensor provides accurate pressure readings to the Dynamic Stability Control (DSC) system, contributing to enhanced vehicle safety and performance.

• Accurate Pressure Monitoring: Ensures precise pressure readings for the DSC system, enhancing brake system performance.
• Improved Safety: Helps maintain optimal brake performance, contributing to overall vehicle safety.
• High-Quality Construction: Made from durable materials for long-lasting reliability.
• Direct Fitment: Designed specifically for BMW M52 engines, ensuring perfect compatibility.
• Easy Installation: Simple to replace, minimizing downtime and maintaining vehicle performance.

Upgrade your BMW’s braking system with the BMW M52 DSC Pressure Sensor to ensure accurate pressure readings and enhanced safety.

Eliminate the grimy, leaky, factory BMW power steering expansion tank with a beautiful billet aluminum reservoir.
Upgraded for thermal capacity, performance and extended rack life!

Our Turner triple baffled reservoir allows you to fix the downfalls of the factory BMW power steering expansion tank without losing that factory feel. The upgraded Turner reservoir has internal baffling to prevent cavitation and air pocket to make sure your rack is getting the supply of power steering. The constant flow of power steering keeps your rack cooled, lubricated and functioning properly. Extend the life of your rack and seals for years to come with increased performance and drivability. Can be used in motorsport, off-roading and daily use applications for a truly unique and universal upgrade.

Eliminates the grimy, leaky, factory BMW power steering expansion tank with a beautiful aluminum component. Increased factory power steering performance in both feel and cooling. Factory-fit with both hoses and bracketry. Additional cooling capacity will increase fluid thermal carrying capacity before overheating. Adapters where necessary to ensure reservoir will work with to-be-designed AN hose kits as well as factory hoses. Add-on, in-line valves to allow for easy flushing of power steering fluid.

Features:

Billet aluminum construction

Eliminates the leaky factory BMW reservoir and replaces it with a billet aluminum component.

Upgraded 0.45L capacity for better cooling and reduced overflow.

Internal baffles to remove bubbles caused by pump cavitation

Compatible with factory hoses and factory bracket.

Removeable Internal mesh filter

The ZF 320z S5D is a common swap choice among BMW enthusiasts due to its reliable and robust nature. Unfortunately, it does have a weakness. The detent pins and springs that live inside of the transmission are known to wear down over time, often causing the shift lever to lean towards the 5th gear position when in neutral.

This full-service kit consists of everything you need to replace the failing detents in your ZF transmission. The kit contains only Genuine ZF components, all of which are sure to provide you with smooth shifting and operation for years to come.

This kit includes the following items:

3 Shift Pin Kits - 23117525048
2 Slide Bushings - 23117533395
2 Gearbox sealing lids - 23311224825
1 Shifter detent pin - 23311224849
1 Shifter detent pin - 23317502165
2 Lock Rings - 23317531374
3 Spring Retention Plates - 23317637524
5 Detent Drift/Punch Tools - 054834LA01AKT
Remedying the ZF's detent issue is a must for any enthusiast planning to get the most out of their transmission. Proper centering is essential for quick and smooth shifting, both being desirable features in any application. This kit is easy to install with several DIY guides existing online. A set of "drift" tools are included for proper installation.

Introducing the Solar Yellow line of bulbs, representing the next evolutionary step in yellow lighting technology. These bulbs feature cutting-edge Vivid-Coat Technology, enabling superior light transmission through the coating, ensuring outstanding performance in adverse weather conditions. With a 2500K yellow color temperature, they provide safer visibility in snow, sleet, fog, dust, and smoke, catering perfectly to inclement weather needs. Whether you're seeking an aesthetic enhancement or improved lighting performance in challenging conditions, Solar Yellow bulbs offer an ideal solution.

• Highest quality quartz glass and alloy filament for enhanced performance and durability
• Vivid-Coat Technology minimizes light loss compared to standard coated bulbs
• Cutting-edge yellow output improves visibility in inclement weather
• 2500K Yellow Color significantly reduces glare compared to white light
• Enhances visibility in challenging weather conditions
• Backed by a one-year warranty

Enhance the performance of your BMW Z3 with the BMW Z3 Shark Injector Performance Software. This performance software is designed to optimize engine performance, improve throttle response, and enhance overall driving dynamics. Engineered specifically for BMW Z3 models, the Shark Injector Performance Software offers easy installation and immediate results. Unlock the full potential of your BMW Z3 with this premium performance upgrade.

• Optimizes engine performance for increased power
• Improves throttle response for enhanced driving experience
• Engineered specifically for BMW Z3 models
• Easy installation with immediate results

• Horsepower and torque gains
• Faster and smoother throttle response
• Top speed limiter removed
• Optional convenience features
• Extremely easy to install/uninstall
• Reversible and reusable

Performance software is a must-have upgrade on your MZ3 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

The MZ3 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. Choose between a stock or raised 8,100 RPM rev limit. The top speed limiter is removed. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine.

The Shark Injector plugs into the diagnostic port inside the Z3 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

MZ3 Dyno
Power and Torque Gains
Stock: 253.2 rear wheel Horsepower, 223.1 rear wheel Torque
Sharked: 266.1 rear wheel Horsepower, 229.8 rear wheel Torque
Peak Gain 12.9 HP and 6.7 Torque @ the wheels.
A Max gain of 14.0 lb/ft rear wheel torque @ 4340 rpm

This item fits the following BMWs:
2001-2002 Z3 BMW Z3 M Roadster M Coupe (US model only)

A combination of billet fittings and AN lines for an upgraded and serviceable crankcase vent hose. Attaches between the oil separator and the CSL air box.

The factory rubber/plastic hoses become brittle and crack over time. Brittle and cracked hoses can cause multiple vacuum leaks that are impossible to repair without hose replacement. Vacuum leaks can cause many problems including rough running, missing, stalling at idle, and even a no-start condition. The factory hoses offered by BMW are plastic and will yield the same results of becoming brittle and damaged over time.

We have created a full motorsport-style solution with our CSL Crankcase made from machined 6061 billet aluminum with AN-style fittings and nylon fiber braided lines. This is a fully serviceable replacement that will outlast every one of the OEM replacements. Our AN crankcase line can be used to replace the factory brittle hose to ensure your S54 is free from vacuum leaks and performing properly.

OEM CSL Vent Hose (11157833649) - Direct Replacement for cars with secondary shut-off valve. (11157834056)

Key benefits:

Lifetime replacement of the brittle OEM plastic crankcase breather hose
Fully Serviceable
Motorsport Aesthetic to compliment your CSL Intake Plenum
Design:

Fittings are made from billet 6061-T6 aluminum and finished in Type II black anodizing
Pre-anodized machined Turner branding
Nylon fiber braided lines
Fittings are a direct replacement for the plastic OEM fittings
Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.

We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips!

Other Features Include:

3.0 Inlet
3.0 Outer Diameter
Black chrome Finish
Left Stepped Design
Rolled Angle Design

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Brushed Finish
Double Wall Construction
Slant Cut Style
Includes Stainless Steel Clamp

Want the best performance option in shock tower mounts? IRP has created their pillow-ball rear shock mounts for just this need. These rear shock mounts are designed for use on the track and racing. This set of mounts will help your rear shocks perform the best they can in all conditions. The advantage to using a mount with spherical bearing is that it allows the shock to freely move off axis without side loading the shock shaft like rubber or polyurethane mounts do. Side loading a shock increases stiction and wear which decreases its efficiency. Because these are mounts without an isolator (rubber or polyurethane) to dampen road noise and vibrations we do not recommend them for street cars.

The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

Fits the following BMW chassis:
E36 BMW All Submodels except for 318ti
E46 BMW All Submodels
E30 BMW All Submodels
E36 Z3 BMW All Submodels
E85/E86 Z4 BMW All Submodels

Enhance Your BMW's Braking Performance with ECS Tuning's Innovative Package

Upgrade the braking capabilities of your BMW E36 M3 or Z3M with ECS Tuning's advanced braking package. This solution prioritizes increased brake torque and thermal capacity, utilizing ECS 2-piece E46 M3 CSL rotors to deliver outstanding performance behind 18" wheels and compatible 17" big brake-friendly wheels.

Key Benefits:

• Custom-designed caliper bracket for fitting ECS 2-piece E46 M3 CSL rotors
• Lightweight aluminum hats for reduced weight and enhanced durability
• Gray cast iron rings for wear resistance and efficient heat dissipation
• 2-Piece semi-floating construction prevents rotor warping
• Heat-treated for increased strength and performance
• Directionally veined for accelerated cooling
• Drilled and slotted design for improved ventilation and cleaner brake pads
• Overall weight savings for improved braking and suspension performance
• High manufacturing quality for corrosion resistance and long-term durability

Installation is hassle-free, utilizing existing calipers, pads, lines, and hardware. Upgrade your pads simultaneously with a wide selection of E36 M3 or E46 M3 brake pads for enhanced performance.