BMW Internal Engine Parts for BMW Z Series E36/7 (1996-2002)

Cat Cams Upraded Camshafts - 268/268 - 230/230 - 10.45mm/10.45mm - 1....

For non-TU M52B28 (Single VANOS)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28271168

Part#: 1304214

Ships on Aug 24, 2026

$ 1,524.99 USD

Add to Wish List

Qty

$ 1,524.99 USD

Add to Wish List

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 272 Degree, 12.5m...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:11749

Part#: TMS11749

Ships on Oct 29, 2026

$ 824.99 USD

Add to Wish List

Qty

$ 824.99 USD

Add to Wish List

E46 M3 Schrick 272 Degree Exhaust Camshaft with 12.5mm valve lift. New rocker arms are required (BMW part #11337833259 or a new Schrick part).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Main Stud Kit - M50/M52/S50/S52

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26171653

Part#: ARP-MSK-M50

Back Ordered

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

This ARP Main Stud Kit is designed to replace BMW 11111735525 for the M50/M52/S50/S52 engines that were used in a variety of BMW models. One significant advantage of these main studs is their ability to prevent main cap walk, which can occur when the main caps shift or move out of position, potentially causing damage to the engine. In addition, ARP Main Studs can safeguard the threads of your engine block, providing an extra layer of protection against potential damage. When opting for main studs instead of factory bolts, it's important to note that the engine builder should mic the bores. Using studs may require a line hone to ensure proper fitment and alignment. A line hone is a machining process that can be used to resize and reshape the main bearing bores, ensuring that they are perfectly round and concentric. This is crucial for ensuring proper oil clearance and preventing premature bearing wear. By mic'ing the bores and performing a line hone if necessary, engine builders can ensure that the main studs are installed correctly and that the engine will perform reliably and at its best. Installation Instructions: To ensure accurate torque readings and proper thread engagement, thoroughly clean all threads in the engine block. If necessary, use an ARP chaser to chase the threads. Before installing any hardware, carefully inspect and clean it for defects, shipping damage, and proper fit, length, and dimension. Gently screw the main studs into the engine block by hand until they are snug. Install the main caps, checking for any binding or misalignment. Apply ARP Ultra-torque fastener assembly lubricant to the threads of the studs, nuts, and washers. Install the washers and nuts onto the studs and tighten them by hand. It is highly recommended to use the ARP Ultra-torque fastener assembly lubricant provided with the kit, as it provides consistent clamping force and reduces friction on the studs. Do not use motor oil or other low-quality lubricants. PRELOAD (TORQUE) RECOMMENDATIONS 7. Following the manufacturer-recommended torque sequence tighten the nuts in steps 1-3 Step 1: Tighten to 20 ft-lbs. Step 2: Tighten to 40 ft-lbs. Step 3: Tighten to 60 ft-lbs. With the included ARP Ultra-Torque fastener assembly lubricant

Show More Show Less

Timing Chain Tensioner Piston - E36 M3, E46 M3, MZ3, MZ4 with S52 or ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3162

Part#: 11317838675

In Stock

3% off MSRP $ 199.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 194.99 USD

Add to Wish List

Qty

3% off MSRP

$ 199.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 194.99 USD

Add to Wish List

This timing chain tensioner piston fits BMW S52 and S54 engines on the E36 M3, E46 M3, MZ3, MZ4. This is the tensioner with the flat face rather than the keyed face that grips the tensioner rail.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1996-1999 E36 BMW M3 M3 Convertible
2001-2006 E46 BMW M3 M3 Convertible
1998-2002 Z3 BMW Z3 M Roadster Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster Z4 M Coupe

This one piece piston is an upgrade for the following BMWs with the 2 piece piston.
1994-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2000-2006 E53 BMW X5 3.0i
2004-2006 E83 BMW X3 2.5i X3 3.0i with M54 engine
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2008 E85 BMW Z4 2.5i Z4 3.0i with M54 engine

Show More Show Less

Crankshaft Thrust Bearing - Green - E28, E30, E34, E36, E39, E46, Z3,...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:19143

Part#: 11211706830

In Stock

Sale - Save 28% $ 69.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 50.45 USD

Add to Wish List

Qty

Sale - Save 28%

$ 69.99

This product was last offered at the strikethrough price on
05-02-2026

$ 50.45 USD

Add to Wish List

Genuine BMW Guide-Bearing Shell Green - 60,00Mm(0)
This item fits the following BMW Chassis:
E36 M3,E46 M3,E85 Z4M,E30,E34,E36,E39,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
M20,M42,M50,M52,S50,S52,S54

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5m...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1259

Part#: TMS1259

In Stock

Sale - Save 5% $ 1,775.98

This product was last offered at the strikethrough price on
07-07-2026

$ 1,687.18 USD

Add to Wish List

Qty

Sale - Save 5%

$ 1,775.98

This product was last offered at the strikethrough price on
07-07-2026

$ 1,687.18 USD

Add to Wish List

E46 M3 Schrick 280 Degree Exhaust Camshaft with 12.5mm lift. This was originally desinged for the M3 CSL but works great in the standard M3. This cam is slightly more agressive than the "original" Schrick 272 degree (which we also offer). A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Cat Cams Camshaft Set - 288/280 12.75mm/12.50mm Lift - E46 M3 With R...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4414885

Part#: 1301805KIT

In Stock

$ 4,372.99 USD

Add to Wish List

Qty

$ 4,372.99 USD

Add to Wish List

Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is. The included rocker arm kit consist of: - 24x "CAT031" rocker arm, steel billet, coated - 1x oil connector bridge - rocker arms with 0.5mm oil jet hole towards the cam/follower contact area - rocker arm shafts need to be drilled at each rocker arm (in the groove already present) - rocker arm shafts need to be drilled at oil bridge connector (no need to make extra groove, connector has internal groove) - intake rocker arm shaft needs front plug to close - intake rocker arm shaft has no oil feed so an oil bridge is required to connect the intake/exhaust rocker arm shafts *Please note that the factory cams ave a pressure regulator valve that needs to be removed and installed in the new cams*

Show More Show Less

S54 Camshaft Installation Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:599963

Part#: 1131783634KT1

In Stock

Sale - Save 3% $ 307.99

This product was last offered at the strikethrough price on
06-15-2026

$ 298.02 USD

Add to Wish List

Qty

Sale - Save 3%

$ 307.99

This product was last offered at the strikethrough price on
06-15-2026

$ 298.02 USD

Add to Wish List

Includes needed gaskets and hardware for installing a new camshaft set.

Crankshaft Thrust Bearing - Green - E28, E30, E34, E36, E39, E46, Z3,...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:32543

Part#: 11212241935

In Stock

Sale - Save 22% $ 44.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.95 USD

Add to Wish List

Qty

Sale - Save 22%

$ 44.99

This product was last offered at the strikethrough price on
05-02-2026

$ 34.95 USD

Add to Wish List

Genuine BMW Guide-Bearing Shell Green - 60,00Mm(0)
This item fits the following BMW Chassis:
E36 M3,E46 M3,E85 Z4M,E30,E34,E36,E39,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
M20,M50,M52,S50,S52,S54

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5m...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338216

Part#: TMS1259

In Stock

Sale - Save 45% $ 2,432.99

This product was last offered at the strikethrough price on
05-14-2026

Starting at $ 1,331.22 USD

Add to Wish List

Sale - Save 45%

$ 2,432.99

This product was last offered at the strikethrough price on
05-14-2026

Starting at $ 1,331.22 USD

Add to Wish List

E46 M3 Schrick 280 Degree Exhaust Camshaft with 12.5mm lift. This was originally desinged for the M3 CSL but works great in the standard M3. This cam is slightly more agressive than the "original" Schrick 272 degree (which we also offer). A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Genuine BMW Piston Ring Set (84.00 mm, Standard) - E39 E46 E60 E83 Z3...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:33487

Part#: 11257511697

Ships in 7 Business Days

2% off MSRP $ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 100.99 USD

Add to Wish List

Qty

2% off MSRP

$ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 100.99 USD

Add to Wish List

Genuine BMW Repair Kit Piston Rings - (0)
This item fits the following BMW Chassis:
E39,E46,E83 X3,E85

Fits BMW Engines including:
M54,M56

Race German Single Vanos Rebuild - Deluxe Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6843926

Part#: RGSVNSDK

Ships in 2 Business Days

$ 101.99 USD

Add to Wish List

Qty

$ 101.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW introduced VANOS in the early 90s, and it added variable valve timing to the straight six engines. Over time the VANOS unit wears out which can cause error codes or VANOS rattle. Race German has sourced quality replacement parts in an easy kit. Seal Kit: 1 PTFE Teflon Ring Seal 1 FKM (Viton) O Ring Seal 2 Copper Oil Pipe Washers Anti Rattle Bushing Set (1 Bushing + 2 Bearings) OEM Vanos Sealing Gasket *Note: a modified 18mm socket is needed to disassemble the VANOS unit. We are now offering this socket at a small charge. If you have a 1993 model single VANOS car, the 18mm socket will not work. You will need a modified 17mm socket. This kit does not include the modified sockets.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts for BMW Z3 (1996-2002)

Sub-Categories

Cat Cams Upraded Camshafts - 268/268 - 230/230 - 10.45mm/10.45mm - 1....

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 272 Degree, 12.5m...

Main Stud Kit - M50/M52/S50/S52

Timing Chain Tensioner Piston - E36 M3, E46 M3, MZ3, MZ4 with S52 or ...

Crankshaft Thrust Bearing - Green - E28, E30, E34, E36, E39, E46, Z3,...

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5m...

Cat Cams Camshaft Set - 288/280 12.75mm/12.50mm Lift - E46 M3 With R...

S54 Camshaft Installation Kit

Crankshaft Thrust Bearing - Green - E28, E30, E34, E36, E39, E46, Z3,...

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5m...

Genuine BMW Piston Ring Set (84.00 mm, Standard) - E39 E46 E60 E83 Z3...

Race German Single Vanos Rebuild - Deluxe Kit

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results