Cylinder Head Bolts for BMW Z Series E36/7 (1996-2002)

ARP Steel Block Head Stud Kit for M50/M52 & S50/S52 (US Spec) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3606

Part#: 201-4302

In Stock

19% off MSRP $ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD

Add to Wish List

Qty

19% off MSRP

$ 295.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 240.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found for the E36 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines (steel block only)
1992-1995 M50 6 cylinder including 325i, 325is and 525i
1996-1999 M52 6 cylinder including 328i, 328is, 323is, 528i
1995-1995 S50US 3.0 liter including 1995 M3 (US only)
1996-1999 S52US 3.2 liter including 1996-1999 M3 (US) and MZ3

Show More Show Less

ARP S54 Head Stud Kit (E46M3 / MZ3 / MZ4)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3631

Part#: 201-4303

In Stock

$ 247.99 USD

Add to Wish List

Qty

$ 247.99 USD

Add to Wish List

Virtually every top professional BMW engine builder relies on ARP Pro Series head studs, particularly on the S54 3.2 liter engine. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best S54 head studs we've found for the E46 M3 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines
2001-2006 E46 M3 coupe & convertible
2001-2002 MZ3 M Roadster & M Coupe (with S54 engine)
2006-2008 MZ4 Z4 M Roadster & M Coupe

Show More Show Less

Athena Cut Ring Head Gasket - 84.5mm - BMW M50 M52 (84mm Bore) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26171655

Part#: ATH-HG-CR-M50-84

Ships in 4 Business Days

$ 324.99 USD

Add to Wish List

Qty

$ 324.99 USD

Add to Wish List

Upgrade your BMW engine's performance with the Athena Cut Ring Head Gasket. This gasket replaces BMW part # 11121726619 and 11121726617 and is specifically designed for M50 & M52 iron block inline 6-cylinder engines found in E34/E36 chassis. Standard OEM & MLS gaskets can only handle a certain amount of cylinder pressure before they start to leak, making the Athena Cut Ring Head Gasket the recommended choice for applications making 16+ psi. A compression leak passing the head gasket can cause a range of issues, including engine overheating, loss of power, misfires, and in severe cases, catastrophic engine failure. Athena's gasket is crafted with premium quality reinforced M0115, an asbestos-free material that's original equipment approved and renowned for its superior quality. The AISI 304 stainless steel Cooper Rings bite into the aluminum head, providing maximum sealing capabilities around the cylinder bore and optimizing engine performance, even on engines with nitrous and/or turbo applications that exceed 2-bar boost. Before installation, it is crucial to have the mating surfaces of the cylinder head and block professionally cleaned and resurfaced to ensure they are completely flat. Please be aware that the gasket should have a size that is 0.5mm to 1mm larger than the piston. For example, if the piston measures 84mm, then the gasket should be the next size up, either 84.5mm or 85mm. Installation instructions: Make sure that the engine block and cylinder head surfaces are clean, flat, and free from any debris, oil, or coolant. Install the Cut Ring gasket on the engine block and ensure that it is properly aligned. Avoid twisting or bending the gasket during installation. Place the cylinder head on top of the gasket and install the head bolts or studs in their correct positions. Follow the manufacturer's recommended torque specifications and tighten the bolts or studs in the proper sequence to ensure even clamping force across the gasket. After the initial tightening, re-torque the head bolts or studs after the engine has been started and then allowed to cool to room temperature. This will ensure that the gasket is properly seated and compressed. It is recommended to not use any additional sealant on the MLS gasket, as it is already coated with a Viton rubber sealant. Using additional sealant can hinder the performance of the gasket.

Show More Show Less

Genuine BMW Cylinder Head Stud - S54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:12894

Part#: 11127830859

Ships in 3 Business Days

3% off MSRP $ 38.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.99 USD

Add to Wish List

Qty

3% off MSRP

$ 38.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.99 USD

Add to Wish List

Genuine BMW Stud Bolt - M7/6X32
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

OEM Head Bolt Set - M50 M52 S50 S52

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1551

Part#: 11121721938

In Stock

Sale - Save 66% $ 62.21

This product was last offered at the strikethrough price on
05-14-2026

$ 20.94 USD

Add to Wish List

Qty

Sale - Save 66%

$ 62.21

This product was last offered at the strikethrough price on
05-14-2026

$ 20.94 USD

Add to Wish List

Head Bolt Set for all M50 engines with a steel engine block.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1998-2000 Z3 BMW M Roadster M Roadster

Show More Show Less

Complete Cylinder Head Replacement Kit - BMW M52TU M54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:15710818

Part#: 11127514540KT

Ships on Aug 14, 2026

$ 2,332.10 USD

Add to Wish List

Qty

$ 2,332.10 USD

Add to Wish List

When duty calls and its time to replace or refresh your cylinder head, you'll need quite a few components. Look no further because we've collected all those parts into one kit including notable items like 7 liters of BMW oil, 1 gallon of coolant, all seals and gaskets needed and required hardware all available in one kit at the push of a button!

Show More Show Less

Genuine BMW Cylinder Head Bolt Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:367539

Part#: 11121721938

In Stock

$ 60.94 USD

Add to Wish List

Qty

$ 60.94 USD

Add to Wish List

Cylinder Head Bolt Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:582581

Part#: 11121721938

In Stock

$ 30.99

This product was last offered at the strikethrough price on
01-05-2026

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Genuine BMW Cylinder Head Bolt Set - M52TU M54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:367549

Part#: 11121740065

Ships in 3 Business Days

13% off MSRP $ 58.96

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 51.14 USD

Add to Wish List

Qty

13% off MSRP

$ 58.96

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 51.14 USD

Add to Wish List

Head Bolt set for M52TU and M54 engines with aluminum block. This item fits the following BMWs: 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi 1997-2003 E39 BMW 525i 528i 530i 2004-2005 E60 BMW 525i 525xi 530i 530xi 2004-2005 E83 BMW X3 2.5i X3 3.0i 2000-2006 E53 BMW X5 3.0i 1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i 2003-2005 E85 BMW Z4 2.5i Z4 3.0i

Show More Show Less

Genuine BMW Cylinder Head Bolt - Set - S54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:367551

Part#: 11127831862

Ships in 3 Business Days

2% off MSRP $ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.99 USD

Add to Wish List

Qty

2% off MSRP

$ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.99 USD

Add to Wish List

Genuine BMW Cylinder Head Bolt Set - M44 1.9L M42 1.8L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:367540

Part#: 11121721939

Ships in 3 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Head Bolt Set - S54 - E46 M3, MZ3 S54, Z4 M

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25748

Part#: 11127831862

In Stock at Vendor

$ 51.98 USD

Add to Wish List

Qty

$ 51.98 USD

Add to Wish List

Head Bolt Set for the S54 engine.

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Wagner Tuning M54 Upgrade Head Stud Set - Burnished

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38330030

Part#: P102031410

Ships in 2 Business Days

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

A necessary upgrade for the M54 engine if you plan on adding more power!

Head Bolt Set - E30 E36 M42 M44 318i 318is, Z3 1.9

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:19403

Part#: 11121721939

Ships in 1-2 days

$ 54.58 USD

Add to Wish List

Qty

$ 54.58 USD

Add to Wish List

Replacing a head gasket? The M42 /M44 engine cylinder head bolts stretch when installed and as a result cannot be re-used. Replace you head bolts with this set of 10 head bolts.

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ti 318ic
1997-1998 Z3 BMW Z3 1.9

Show More Show Less

E36 / E34 / E39 / Z3 - Complete Cylinder Head Basic Replacement Kit ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:15744068

Part#: 114278337690-KT

Ships on Jul 7, 2026

Sale - Save 4% $ 2,878.47

This product was last offered at the strikethrough price on
02-27-2026

$ 2,755.61 USD

Add to Wish List

Qty

Sale - Save 4%

$ 2,878.47

This product was last offered at the strikethrough price on
02-27-2026

$ 2,755.61 USD

Add to Wish List

Introducing the Complete Cylinder Head Basic Replacement Kit for BMW E36, E34, E39, Z3 with M52, S50, and S52 engines - your ultimate solution for efficient and cost-effective engine maintenance. This comprehensive kit is designed to maximize the performance, durability, and longevity of your BMW, ensuring it operates at peak efficiency for years to come. Optimal Engine Performance: Our Complete Cylinder Head Basic Replacement Kit is engineered to enhance your BMW's engine performance. By replacing the cylinder head, you can restore lost power and torque, resulting in improved acceleration and overall driving experience. Improved Fuel Efficiency: Upgrading your BMW with our kit not only boosts power but also enhances fuel efficiency. This means you'll save money on fuel costs while reducing your carbon footprint. Enhanced Durability: The components included in this kit are crafted from high-quality materials, ensuring long-lasting durability. This translates to fewer repairs and less downtime for your vehicle. Cost Savings: Investing in this comprehensive kit is more cost effective than purchasing individual components. It contains everything you need for a cylinder head replacement, eliminating the hassle of sourcing parts separately. OEM-Quality Parts: We prioritize quality and reliability, which is why our kit features OEM-equivalent or superior components. Rest assured that you're getting the best value for your money. Fits Multiple BMW Models: This kit is compatible with various BMW models, including E36, E34, E39, and Z3, with M52, S50, and S52 engines. This versatility ensures that a wide range of BMW enthusiasts can benefit from it. Extended Engine Lifespan: By replacing the cylinder head with our kit, you can significantly extend the lifespan of your BMW engine, leading to more trouble-free miles on the road. Satisfaction Guaranteed: Some kit components are covered by our Lifetime Replacement Program. We stand behind the quality of our Complete Cylinder Head Basic Replacement Kit. Your satisfaction is our priority, and we offer a satisfaction guarantee to provide peace of mind to our valued customers. Kit includes: 1 - BMW Coolant / Anitfreeze 7 - BMW TwinPower Turbo 5W-30 Engine Oil - 1 Liter 1 - Cylinder Head Bolt Kit 1 - Cylinder Head Installation Kit 14 - Cylinder Head Washer - Cylinder Head Bolts 1 - Engine Oil Drain Plug 28 - Exhaust Manifold Nuts 1 - Liquid Assembly Lube - 12 oz 1 - M52 / S52 Cylinder Head - Complete 1 - Turner Motorsport Oil Change Sticker 1 - Oil Filter Kit

Show More Show Less

Febi Cylinder Head Bolt Kit - E36, E39, E46, Z3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:363745

Part#: 11121721938

Ships on Sep 2, 2026

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Set of 14 stretch bolts for installing cylinder head

Meistersatz Cylinder Head Bolt Kit - E34, E36, E39, Z3

For vehicles with production date up to 09/1998

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1195780

Part#: 11121721938

Ships in 4 Business Days

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Set of 14 stretch bolts for installing cylinder head

Genuine BMW Stud Bolt - 07129905384 - E46 M3,E60 M5,E63 M6,E65,E85 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28876

Part#: 07129905384

Ships in 6 Business Days

$ 4.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Replacement Genuine BMW head stud Genuine BMW Stud Bolt This item fits the following BMW Chassis: E60 M5,E63 M6,E46 M3,E85 Z4M,E46,E63,E65,E85 Z4,E86 Z4

Cylinder Head Bolt

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:580043

Part#: 802.76

Special Order: No Guaranteed ETA

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Prevent oil leaks, coolant mixing, and catastrophic compression loss by refreshing your engine with fresh, factory-spec head hardware.

Project Cars

SELECT YOUR BMW

Cylinder Head Bolts for BMW Z3 (1996-2002)

ARP Steel Block Head Stud Kit for M50/M52 & S50/S52 (US Spec) ...

ARP S54 Head Stud Kit (E46M3 / MZ3 / MZ4)

Athena Cut Ring Head Gasket - 84.5mm - BMW M50 M52 (84mm Bore) ...

Genuine BMW Cylinder Head Stud - S54

OEM Head Bolt Set - M50 M52 S50 S52

Complete Cylinder Head Replacement Kit - BMW M52TU M54

Genuine BMW Cylinder Head Bolt Kit

Cylinder Head Bolt Kit

Genuine BMW Cylinder Head Bolt Set - M52TU M54

Genuine BMW Cylinder Head Bolt - Set - S54

Genuine BMW Cylinder Head Bolt Set - M44 1.9L M42 1.8L

Head Bolt Set - S54 - E46 M3, MZ3 S54, Z4 M

Wagner Tuning M54 Upgrade Head Stud Set - Burnished

Head Bolt Set - E30 E36 M42 M44 318i 318is, Z3 1.9

E36 / E34 / E39 / Z3 - Complete Cylinder Head Basic Replacement Kit ...

Febi Cylinder Head Bolt Kit - E36, E39, E46, Z3

Meistersatz Cylinder Head Bolt Kit - E34, E36, E39, Z3

Genuine BMW Stud Bolt - 07129905384 - E46 M3,E60 M5,E63 M6,E65,E85 ...

Cylinder Head Bolt

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results