Oiling System for BMW Z3 (1996-2002)

Clear BMW chassis

Please ensure your correct model is selected

Tasked with keeping everything properly lubricated, the oiling system is one of the most if not THE most fundamental parts of the engine. Make sure that everything is in good working order and flowing properly to ensure your engine has a long and trouble-free service life.

Sub-Categories

Sort By:

Turner Baffled Oil Catch Can Kit - 8oz
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:398784
Part#: 022798TMS01-07KT
In Stock
Sale - Save 15% $ 336.99

This product was last offered at the strikethrough price on
06-14-2026

$ 286.44 USD
Free Shipping
Sale - Save 15%
$ 336.99

This product was last offered at the strikethrough price on
06-14-2026

$ 286.44 USD
Free Shipping
When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however, this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed/recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.
Show More Show Less
Turner Motorsport - Corporate Logo
T#:56110301
Part#: 060233LA01
In Stock
New Item
$ 49.99 USD
Free Shipping
$ 49.99 USD
Free Shipping

If your M50, M52, or M54 engine takes a few seconds to build oil pressure after sitting, there's a good chance that your factory oil filter housing drain back valve has failed. Over time, the factory plastic check valve degrades, allowing oil to drain completely out of the housing and back into the oil pan while sitting. Every cold start essentially becomes a dry start, resulting in a loud ticking noise and causing unnecessary wear on your engine's internals.

Unfortunately, BMW does not offer this check valve as a standalone part, forcing you to purchase a costly, complete oil filter housing assembly just to fix one failed plastic component. Thankfully, our team of BMW enthusiasts took note of this common failure mode and designed a permanent, cost-effective fix.

Our Billet Oil Filter Housing Drain-Back Valve is designed as a direct-fit upgrade for your factory oil filter housing. CNC-machined from high-strength billet aluminum, this upgraded valve restores positive sealing to keep the oil filter housing fully primed. Maintaining this hydraulic prime ensures rapid oil pressure stabilization upon startup, directly mitigating dry-start bearing wear and top-end lifter starvation without requiring the purchase of a complete OEM housing assembly.

Show More Show Less
Turner Baffled Oil Universal Catch Can Kit - 10oz
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:398786
Part#: 022798TMS01-09KT
In Stock
Sale - Save 15% $ 305.99

This product was last offered at the strikethrough price on
06-14-2026

$ 260.09 USD
Free Shipping
Sale - Save 15%
$ 305.99

This product was last offered at the strikethrough price on
06-14-2026

$ 260.09 USD
Free Shipping
When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow.
Show More Show Less

Turner Baffled Oil Catch Can Kit - 6oz
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:398782
Part#: 022798TMS01-05KT
In Stock
Sale - Save 15% $ 302.99

This product was last offered at the strikethrough price on
06-14-2026

$ 257.54 USD
Free Shipping
Sale - Save 15%
$ 302.99

This product was last offered at the strikethrough price on
06-14-2026

$ 257.54 USD
Free Shipping
When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however, this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed/recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.
Show More Show Less

E36, Z3 Turner Motorsport Oil Pan Baffle Kit
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:921
Part#: TEN3631B36-GROUP
Ships in 6 Business Days
Sale - Save 10% $ 247.99

This product was last offered at the strikethrough price on
06-13-2026

$ 223.19 USD
Free Shipping
Sale - Save 10%
$ 247.99

This product was last offered at the strikethrough price on
06-13-2026

$ 223.19 USD
Free Shipping

Through experimentation and data acquired from our E36 World Challenge Touring Cars, it was discovered that in long corners and under heavy braking that there was an oil starvation problem in the M50 and M52 engines. This system was developed to keep oil in the sump and eliminate the starvation problem. After several iterations, further testing and data acquisition in the Touring Cars showed that this system eliminates the problem of oil starvation. This is a less expensive alternative to replacing the stock oil pan with the factory BMW M3 Lightweight oil pan, while still achieving the similar results.

*Requires Professional Welding

Installation instructions (E36/Z3 Oil Pan Baffle for M50, M52, S50, S52 engines)

 

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1992-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW Z3 M Coupe M Roadster S52

Show More Show Less
Turner Motorsport Oil Pan Baffle Kit - BMW E36 & Z3
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:338997
Part#: TMS338997
Ships in 6 Business Days
Sale - Save 10% $ 247.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 223.19 USD
Free Shipping
Sale - Save 10%
$ 247.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 223.19 USD
Free Shipping

Through experimentation and data acquired from our E36 World Challenge Touring Cars, it was discovered that in long corners and under heavy braking that there was an oil starvation problem in the M50 and M52 engines. This system was developed to keep oil in the sump and eliminate the starvation problem. After several iterations, further testing and data acquisition in the Touring Cars showed that this system eliminates the problem of oil starvation. This is a less expensive alternative to replacing the stock oil pan with the factory BMW M3 Lightweight oil pan, while still achieving the similar results.

*Requires Professional Welding

Installation instructions (E36/Z3 Oil Pan Baffle for M50, M52, S50, S52 engines)

 

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1992-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW Z3 M Coupe M Roadster S52

 

Show More Show Less

Achilles Motorsports - Corporate Logo
T#:1150773
Part#: 11-AM-UOPSK-M54
In Stock
$ 270.99 USD
Free Shipping
$ 270.99 USD
Free Shipping
The M54 engine has well-documented issues caused by harmonics. The extreme vibrations cause the weak oil pump shaft to shear off or the oil pump nut to come loose and fall off, all of which results in an instant loss of oil pressure. Achilles Motorsports decided to develop a solution to fix all of these known issues. Achilles takes their oil pump shafts to the extreme, using only the toughest materials and heat treatment processes to ensure optimum strength. The core of this kit is a hardened Chromoly shaft that is centerless ground to ensure absolute trueness. The shaft is engineered with an exclusive square key lock system that not only prevents the gear from ever spinning on the shaft but also adds strength to the area to which the gear mounts. Achilles Motorsports then replaced the pesky oil pump nut with an extended length bolt that is EDM drilled for safety wire to properly secure it for all conditions. Don't wait for your oil pump to fail and leave you stuck with costly engine repairs! Key Features: Hardened Chromoly centerless ground shaft EDM Drilled Bolt with a piece of safety wire included Grade 8 extended length hardware to secure the gear to the shaft Left hand threaded to prevent it from unexpectedly coming loose Exclusive Square key lock shaft and drive gear 100% serviceable & rebuildable without the need for grinding NOTE: Professional installation required! The shaft requires being pressed into the oil pump's inner rotor.
Show More Show Less
Achilles Motorsports Oil Pan Baffle Kit - BMW M50 M52 S50 S52 ...
For Single Vanos Engines with a production date up to 09/1998
Achilles Motorsports - Corporate Logo
T#:1150765
Part#: 11-AM-OPB
In Stock
$ 159.99 USD
Free Shipping
$ 159.99 USD
Free Shipping
The Achilles Motorsports Oil Pan Baffle was designed and manufactured to be used on racing, high-performance track, and street driven cars. Each baffle is precision laser cut from .090" heat-treated aluminum then hand-assembled and test fit to ensure accuracy and ease of installation. Achilles Motorsports' baffle design incorporates dual trap doors and a unique oil deflector that prevents oil from splashing out of the sump under hard braking. Together, these help minimize the sloshing of the oil inside the oil pan and keep oil accumulated around your pickup tube. The factory BMW oil pan doesn't do a very good job of keeping oil accumulated around the oil pick-up tube in high g-force situations. By keeping oil accumulated around the pickup tube you can eliminate the costly loss of oil pressure and potential damage to other vital engine parts commonly caused by high g-forces from hard acceleration and braking and high-speed cornering. Professional welding is required for installation! During installation, while the oil pan is removed, we HIGHLY RECOMMEND upgrading your factory oil pump with the Achilles Motorsport Upgraded Oil Pump Shaft Kit (T#1150772). After numerous instances of sheered-off oil pump shafts and oil pump nuts coming loose, resulting in an instant loss of oil pressure, Achilles decided to come up with a solution - Don't let it happen to you!
Show More Show Less

Bimmerworld - Corporate Logo
T#:1120864
Part#: 100.11.530.0003
In Stock
$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping

Upgrade your BMW's oil pressure sensor setup with the Oil Distribution/Sending Block. This versatile block is designed to mount in the stock oil pressure sensor location on the oil filter housing or in the original location on the engine block. It allows the use of up to two aftermarket sending units (not included) along with the factory sensor, providing accurate pressure and temperature measurements. Engineered for reliability and cleanliness, it ensures a reliable setup for your BMW's oil pressure monitoring needs.

  • Mounts in stock oil pressure sensor location for easy installation
  • Allows use of up to two aftermarket sending units in addition to the factory sensor
  • Incorporates factory sending unit for utilizing the factory oil pressure light
  • Threaded for one M12x1.5 port and two 1/8th NPT ports for versatility
  • Includes banjo bolt and crush washers for secure installation
  • Compatible with various BMW engines including M20, M42, M50, M52, M54, N52, N54, S50, S52, S54, S65, M10, S14, and M30
Show More Show Less

Achilles Motorsports - Corporate Logo
T#:1150772
Part#: 11-AM-UOPSK
In Stock
$ 217.99 USD
Free Shipping
$ 217.99 USD
Free Shipping
The early M5X engines have well-documented issues caused by harmonics. The extreme vibrations cause the weak oil pump shaft to shear off or the oil pump nut to come loose and fall off, all of which results in an instant loss of oil pressure. Achilles Motorsports decided to develop a solution to fix all of these known issues. Achilles takes their oil pump shafts to the extreme, using only the toughest materials and heat treatment processes to ensure optimum strength. The core of this kit is a hardened Chromoly shaft that is centerless ground to ensure absolute trueness. The shaft is engineered with an exclusive square key lock system that not only prevents the gear from ever spinning on the shaft but also adds strength to the area to which the gear mounts. Achilles Motorsports then replaced the pesky oil pump nut with an extended length bolt that is EDM drilled for safety wire to properly secure it for all conditions. Don't wait for your oil pump to fail and leave you stuck with costly engine repairs! Key Features: Hardened Chromoly centerless ground shaft EDM Drilled Bolt with a piece of safety wire included Grade 8 extended length hardware to secure the gear to the shaft Left hand threaded to prevent it from unexpectedly coming loose Double-D keyed shaft and drive gear 100% serviceable & rebuildable without the need for grinding. NOTE: Professional installation required! The shaft requires being pressed into the oil pump's inner rotor.
Show More Show Less
Genuine BMW - Corporate Logo
T#:34944
Part#: 11411748098
In Stock
4% off MSRP $ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 108.99 USD
Free Shipping
4% off MSRP
$ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 108.99 USD
Free Shipping
Having a loss of oil pressure? This little guy could be your issue. In charge of creating oil pressure and moving around oil volume, wear, and tear could result in failure and loss in pressure!
Genuine BMW - Corporate Logo
T#:31877
Part#: 11137834885
Ships in 1-2 days
1% off MSRP $ 79.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 78.99 USD
Free Shipping
1% off MSRP
$ 79.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 78.99 USD
Free Shipping


Genuine BMW Cover
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54



Genuine BMW - Corporate Logo
T#:1146
Part#: 17212227235
Ships in 1-2 days
$ 163.99 USD
Free Shipping
$ 163.99 USD
Free Shipping
These are the Original BMW oil lines / tubing / hoses to connect the Euro M3 oil cooler to the Euro oil filter housing. These hoses can be used on any E36 6 cylinder (325i, 325is, 323is, 328i, 328is, and M3) to add the European oil cooler. Before ordering these lines, be sure you have all the parts required to do the installation -- including the Euro oil cooler bracket kit, the Euro oil cooler, and the modified oil filter housing. These lines give a factory appearance to the oil cooler retrofit which makes them perfect for otherwise stock cars. If you have a supercharger or track car and need something a little more special, you should get the lines from our Stage 2 Oil Cooler Kit.

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Show More Show Less
Genuine BMW - Corporate Logo
T#:14530
Part#: 11421740001
In Stock
8% off MSRP $ 345.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 316.99 USD
Free Shipping
8% off MSRP
$ 345.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 316.99 USD
Free Shipping


Genuine BMW Aggregate Support With Oil Filter -
This item fits the following BMW Chassis:
E36,E39

Fits BMW Engines including:
M52

Genuine BMW - Corporate Logo
T#:34580
Part#: 11361406655
Ships in 1-2 days
$ 203.99 USD
Free Shipping
$ 203.99 USD
Free Shipping
Genuine BMW OIL PIPE
Fits BMW Engines including:
S52


Genuine BMW - Corporate Logo
T#:360718
Part#: 12617508003
Ships in 1-2 days
6% off MSRP $ 349.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 329.99 USD
Free Shipping
6% off MSRP
$ 349.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 329.99 USD
Free Shipping

Genuine BMW - Corporate Logo
T#:46823
Part#: 17227503571
Ships in 3 Business Days
$ 223.99 USD
Free Shipping
$ 223.99 USD
Free Shipping


Genuine BMW Oil Cooling Pipe Inlet - A5S 390R

Fits BMW Engines including:
M54

Genuine BMW Oil Filter Housing
For vehicles with an M52TU engine only (09/1998+) - Not compatible with earlier M52 eng...
Genuine BMW - Corporate Logo
T#:12499
Part#: 11421713838
Ships in 1-2 days
3% off MSRP $ 320.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 309.99 USD
Free Shipping
3% off MSRP
$ 320.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 309.99 USD
Free Shipping


Genuine BMW Aggregate Support With Oil Filter -
This item fits the following BMW Chassis:
E39,E46,E53 X5,E83 X3,E85

Fits BMW Engines including:
M52,M54,M56

Show More Show Less

Genuine BMW - Corporate Logo
T#:35547
Part#: 11431740044
In Stock
9% off MSRP $ 157.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 143.99 USD
Limited Qty Sale
Free Shipping
9% off MSRP
$ 157.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 143.99 USD
Limited Qty Sale
Free Shipping


Genuine BMW Guide Tube -
This item fits the following BMW Chassis:
E36

Fits BMW Engines including:
M52,S52

Genuine BMW - Corporate Logo
T#:1592
Part#: 11427839858
Ships in 3 Business Days
8% off MSRP $ 572.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 525.99 USD
Free Shipping
8% off MSRP
$ 572.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 525.99 USD
Free Shipping
Replacement oil filter housing for vehicles with an oil cooler

Genuine BMW - Corporate Logo
T#:12912
Part#: 11157832781
Ships in 1-2 days
2% off MSRP $ 314.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 307.99 USD
Free Shipping
2% off MSRP
$ 314.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 307.99 USD
Free Shipping


Genuine BMW Return Pipe
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54


Genuine BMW - Corporate Logo
T#:367644
Part#: 11411401399
Ships in 1-2 days
$ 61.99 USD
Free Shipping
$ 61.99 USD
Free Shipping
Genuine BMW - Corporate Logo
T#:31976
Part#: 11141432096
Ships in 7 Business Days
5% off MSRP $ 84.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD
Free Shipping
5% off MSRP
$ 84.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD
Free Shipping


Genuine BMW Set Rotor -
This item fits the following BMW Chassis:
E36

Fits BMW Engines including:
M44

Genuine BMW - Corporate Logo
T#:35088
Part#: 11417834889
Ships in 1-2 days
$ 128.99 USD
Free Shipping
$ 128.99 USD
Free Shipping


Genuine BMW Return Pipe
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54



Genuine BMW - Corporate Logo
T#:35087
Part#: 11417834887
Ships in 3 Business Days
3% off MSRP $ 303.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 293.99 USD
Free Shipping
3% off MSRP
$ 303.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 293.99 USD
Free Shipping


Genuine BMW Suction Pipe
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54

Genuine BMW - Corporate Logo
T#:31610
Part#: 11127833008
Ships in 3 Business Days
1% off MSRP $ 74.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 73.99 USD
Free Shipping
1% off MSRP
$ 74.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 73.99 USD
Free Shipping


Genuine BMW Connector
This item fits the following BMW Chassis:
E46 M3,E46

Fits BMW Engines including:
S54

Genuine BMW - Corporate Logo
T#:31756
Part#: 11131748755
Ships in 1-2 days
2% off MSRP $ 972.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 953.99 USD
Free Shipping
2% off MSRP
$ 972.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 953.99 USD
Free Shipping
Replace your cracked or damaged oil pan with this Genuine BMW part that fits models with the M52 and S52 engines. The BMW aluminum oil pans can be damaged by road debris or even by putting the drain pan bolt in incorrectly.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1996-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1996-1998 E36/7 BMW Z3 2.8
1996-2000 E36/7 BMW M Roadster M Coupe
Show More Show Less

Genuine BMW - Corporate Logo
T#:31730
Part#: 11131437001
Ships in 6 Business Days
2% off MSRP $ 925.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 907.99 USD
Free Shipping
2% off MSRP
$ 925.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 907.99 USD
Free Shipping
Genuine BMW OIL PAN
Fits BMW Engines including:
M52,M54


Genuine BMW - Corporate Logo
T#:35522
Part#: 11431437140
Ships in 1-2 days
4% off MSRP $ 118.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 113.99 USD
Free Shipping
4% off MSRP
$ 118.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 113.99 USD
Free Shipping
Genuine BMW GUIDE TUBE
Fits BMW Engines including:
M52

Genuine BMW - Corporate Logo
T#:35556
Part#: 11437503573
Special Order: No Guaranteed ETA
4% off MSRP $ 118.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 113.99 USD
Free Shipping
4% off MSRP
$ 118.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 113.99 USD
Free Shipping
Genuine BMW GUIDE TUBE
Fits BMW Engines including:
M54