BMW Suspension Parts for BMW Z3 (1996-2002)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Turner Rear Suspension Refresh Kit - Level 1 - Z3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:583048
Part#: T33329061945KT2
Back Ordered
Sale - Save 11% $ 278.99

This product was last offered at the strikethrough price on
05-03-2026

$ 249.47 USD
Free Shipping
Sale - Save 11%
$ 278.99

This product was last offered at the strikethrough price on
05-03-2026

$ 249.47 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Reinforcement Plates
Rear Shock Mounts & Gaskets
Trailing Arm Bushings
Sway Bar End Links
Hardware

Show More Show Less
Packaged by Turner - Corporate Logo
T#:338063
Part#: 31129064875
Back Ordered
Starting at $ 208.99 USD
Free Shipping
Starting at $ 208.99 USD
Free Shipping
Anytime that you replace your front control arms (which should be often), you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These bushings have the hole off-center to give your car a little more track, caster, and camber. They are a solid rubber bushing that is great for the street. These came as standard equipment on E30 M3s (8/89-later) and 1995 E36 M3s.

For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
Show More Show Less
3-series Strut/Shock Mount Kit - E36, Z3 (not M models)
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:340167
Part#: E36MOUNTKIT
Back Ordered
Sale - Save 2% $ 320.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 314.89 USD
Free Shipping
Sale - Save 2%
$ 320.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 314.89 USD
Free Shipping
The E36 3 Series Strut/Shock Mount Kit includes two OEM front strut tower mounts with bearings, two front strut reinforcement plates , two front strut tower paper washer gaskets, two  rear shock tower reinforcement plates , ten M8 13mm head Nyloc nuts, a pair of rear shock tower mount gaskets and your choice of three different rear shock mounts.

You can choose from the HD OEM Rear Mounts , the " Repair Shop" Lifetime Warranty Mounts , or the High Performance Aluminum & Rubber Mounts . Any of these mounts are suitable for street use, we recommend the Performance Aluminum & Rubber Mounts for coil-over suspensions or for cars that see a lot of track use.

When you replace spring or shocks & struts in your car, these mounts must be removed and reinstalled anyway. Do it at the same time you replace shocks to save yourself the the increased labor time if they go bad soon after shock/strutinstall.

Choose your product options below.


This item fits the following BMWs:
6/1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is - not for convertibles
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
Show More Show Less

Air Lift - Corporate Logo
T#:377941
Part#: 23444
Ships in 5 Business Days
$ 513.99 USD
Free Shipping
$ 513.99 USD
Free Shipping

Air Lift Viair 444C Dual Pack Compressor - 200 PSI - Chrome offers a significant upgrade for BMW air suspension systems, delivering superior performance and reliability. Engineered by Turner Motorsport, these compressors are designed to enhance efficiency and durability.

  • Newly-Developed Intercooler Head: Improves compressor efficiency and performance.
  • Stainless Steel Braided Leader Hoses: Includes inline check valve assembly for enhanced protection against high amperage restarts.
  • Chrome Finish: Provides increased durability and a sleek, aesthetic appeal.
  • Complete Kit: Includes air filter assemblies, remote mount brackets, fittings, spare air filter elements, nuts, bolts, washers, lock washers, and airline clips.
  • Easy Installation: Compatible with various air suspension setups for a hassle-free upgrade.

Upgrade your BMW's air suspension system with the Air Lift Viair 444C Dual Pack Compressor for top-tier performance and durability.

Show More Show Less

Air Lift - Corporate Logo
T#:370659
Part#: 58130
In Stock at Vendor
$ 134.99 USD
Free Shipping
$ 134.99 USD
Free Shipping
Air Lift - Corporate Logo
T#:384251
Part#: 27685
In Stock at Vendor
$ 2,007.99 USD
Free Shipping
$ 2,007.99 USD
Free Shipping
Air Lift is proud to present the innovative Air Lift Performance 3P system, designed for BMW enthusiasts seeking the pinnacle of air suspension control. With three years of dedicated development and rigorous testing, the 3P system stands as the most advanced offering from Air Lift to date. 3P is a groundbreaking system that merges pressure-based control with the capability to add ride-height sensing through height sensors. This cutting-edge combination delivers instant improvements in suspension control, performance, and ride flexibility, ensuring a smoother and more responsive driving experience. Key Specifications: Controller: The 3P system boasts a state-of-the-art controller with a brilliant TFT color display featuring adjustable backlight and illuminated preset buttons. The display provides real-time information such as tank pressure, 4-corner active height and pressure readings, and a full menu selection. The black anodized CNC machined case is threaded in all four corners for customizable mounting. The keypad can be rotated and configured horizontally for versatile installation options. Additionally, the controller is powered via a Micro-USB port and cable. Mobile App: The 3P system seamlessly integrates with a free mobile app that allows you to adjust your ride height and system settings directly from your smartphone using Bluetooth connectivity. Furthermore, you can conveniently update the system software on the manifold and controller via the mobile app. Manifold: At the core of the 3P system lies the most advanced manifold ever created by Air Lift Performance. Crafted from top-quality components and materials, this manifold has undergone extensive torture testing to ensure long-lasting performance. Equipped with a 32-bit processor, it offers sophisticated height and pressure algorithms for precise control over each corner of your BMW. The streamlined harness connections between the controller, manifold, and power supply make installation straightforward. This manifold is fully integrated with built-in Bluetooth, eliminating the need for extra components and wiring to connect your mobile device to the system. It also includes a built-in accelerometer to make real-time adjustments to ride height using height sensors or maintaining bag pressure according to preset values. Height Sensors: Air Lift Performance has introduced an enhanced height sensor arm with an angular design, extending the sensor's lifespan compared to straight-arm designs. The wiring harnesses for these sensors feature small connectors that eliminate the need for drilling large holes in your BMW for routing. The kit also includes fully adjustable sensor linkages that can be measured and cut to precise lengths, ensuring optimal operation within the recommended range of motion. Show Mode: Enjoy the ability to manage your BMW's ride height when the vehicle is off, using the controller or your smartphone via Bluetooth. Kit Features: Pressure-Based 3/8" Manifold Air Lift Black Anodized Aluminum Display Fully Integrated Wiring Harness, Including Compressor Power Complete Set of Fittings, Hardware, and Connectors for a Hassle-Free Installation Air Lift Automatically Draining Water Trap 60ft of 3/8" Air Line Optional Pressure to Height Upgrade Kit Available for Full 3H Capabilities FREE Smartphone App Compatible with iPhone and Android, Integrated into the Manifold (No Extra Module Required) Enhance your BMW's performance and driving experience with the Air Lift Performance 3P system. Upgrade your air suspension control to achieve new heights of precision and control. Discover the future of air suspension management with the 3P system today! Please note that 27705 can be purchased separately for 3P Digital Air Management System owners looking to upgrade to full height and pressure adjustability in the future. Additionally, 27703 allows for the integration of a second compressor into this management system for added performance.
Show More Show Less

Air Lift - Corporate Logo
T#:377949
Part#: 12955
In Stock at Vendor
$ 194.99 USD
Free Shipping
$ 194.99 USD
Free Shipping

When it comes to customizing your BMW, options matter. Elevate your air tank game with Air Lift aluminum tanks, offering a plethora of sizes, port configurations, and finishes. Choose from raw aluminum or polished finish for a sleek look. Alternatively, customize with your preferred powder coating or anodizing for a personalized touch. Enjoy the weight-saving benefits of aluminum, enhancing performance with faster lap times and improved weight distribution. With Air Lift Performance tanks, elevate your BMW's aesthetics and performance effortlessly.

Features:

  • (2) 1/4" End Ports
  • (2) 3/8" End Ports
  • (1) 1/4" Drain Port
  • 200 PSI Maximum Working Pressure
  • Polished Aluminum Tank
  • Dimensions: 30" L x 6" H x 7.5" H

Fitting packs (available separately):

  • 1/4" V2 Management Fitting Pack - ES#2862251
  • 3/8" V2 Management Fitting Pack - ES#2862252
  • 1/4" Manual Management Fitting Pack - ES#2862264
Show More Show Less
Air Lift - Corporate Logo
T#:384815
Part#: 23444B
Ships in 5 Business Days
$ 521.99 USD
Free Shipping
$ 521.99 USD
Free Shipping

Upgrade your BMW's air suspension system with the 444C Dual Pack Compressors from Turner Motorsport. These compressors feature a newly-developed intercooler head and stainless steel braided leader hose for enhanced durability and performance. Ensure reliable air supply for your BMW's suspension system with this comprehensive kit.

  • Newly-developed intercooler head for improved performance
  • Stainless steel braided leader hose with inline check valve for compressor protection
  • Complete kit includes all necessary components for installation
  • Enhances durability and reliability of your BMW's air suspension system

Kit Features:

  • (2) 444C Black Compressors
  • Patents Pending Intercooler Head
  • (2) Air Filter Assemblies
  • (2) Remote Mount Brackets
  • (2) Sets of Remote Mount Fittings
  • (2) Sets of Spare Air Filter Elements
  • (8) Sets of Nuts, Bolts, Washers and Lock Washers
  • (2) Stainless Steel Braided Leader Hoses with Inline Check Valve
  • (6) Airline Clips

*Does not include relays, pressure switch or air line for remote air filter relocation

Show More Show Less

Powerflex Black Series - Corporate Logo
T#:376439
Part#: PFF5-310-27BX2
Ships in 1 Business Day
$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
1995 - 2002 M Coupe Z3 2.8 Z3 3.0
1995 - 2002 M Roadster Z3 Z3 2.3 Z3 2.5 Z3 2.8 Z3 3.0

Show More Show Less

Air Lift - Corporate Logo
T#:377950
Part#: 12957
In Stock at Vendor
$ 198.99 USD
Free Shipping
$ 198.99 USD
Free Shipping
Customizing your car is all about choices and when it comes to your air tank, that should be no different. With Air Lift aluminum tanks, they can offer you a wide variety of sizes, port configurations, and finishes. Their extruded aluminum tanks are now available in raw aluminum or in a super high quality polished finish. If the look of aluminum is not really your thing, simply take your tank to your favorite powder coating or anodizing shop for a show stopping finish. Whether you decide on a splash of color or bare aluminum, you cannot go wrong with the look of an Air Lift Performance tank! Another huge benefit with their aluminum tanks is the tremendous weight savings you will see over a standard steel tank. Less weight can mean faster lap times and improved weight distribution. Features: (4) 1/4" Face Ports (2) 3/8" End Ports (1) 1/4" Drain Port 200 PSI Maximum Working Pressure Polished Aluminum Tank Dimensions: 30" L x 6" H x 7.5" H Fitting packs (available separately): 1/4" V2 Management Fitting Pack - ES#2862253 3/8" V2 Management Fitting Pack - ES#2862254 1/4" Manual Management Fitting Pack - ES#2862265
Show More Show Less
Powerflex Black Series - Corporate Logo
T#:376531
Part#: PFF5-310-26BX2
Ships in 1 Business Day
$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
1992-1999 E36 318i 318is 318ti 320i 323i 325i 325is 328i 328is M3
1995 - 2002 M Roadster Z3 Z3 2.3 Z3 2.5 Z3 2.8 Z3 3.0

Show More Show Less
Air Lift - Corporate Logo
T#:377944
Part#: 16444
Ships in 5 Business Days
$ 453.99 USD
Free Shipping
$ 453.99 USD
Free Shipping

Ensure optimal performance for your BMW's air suspension system with the reliable 444C Air Compressor. This compressor fills your supply tank efficiently, providing ample air to inflate your air bags and lift your suspension. With a 100% duty cycle and a rating of 200psi, this compressor offers uninterrupted operation and quick air inflation. Considered one of the best options available, it draws around 20 amps and weighs only 9.75 pounds each.

  • 100% duty cycle for uninterrupted operation
  • Rated at 200psi for quick air tank filling
  • Draws around 20 amps for efficient performance
  • Lightweight design at only 9.75 pounds each
Show More Show Less


Air Lift - Corporate Logo
T#:384239
Part#: 27690
In Stock at Vendor
$ 2,509.99 USD
Free Shipping
$ 2,509.99 USD
Free Shipping
Air Lift is proud to introduce their all new height + pressure air suspension control system! Air Lift Performance 3H is the result of three years of development and testing. It is the most advanced product they have yet to create. Air Lift Performance 3H combines pressure-based control with ride-height sensing technology. While both types of air management have been utilized before, this is the first product to harness the benefits of both systems – instantly improving suspension control, performance, and vehicle ride flexibility. Key Specs: Controller - Features a brilliant TFT color display with adjustable backlight and illuminated preset buttons. Shown in the full color display is your tank pressure, 4-corner active height and pressure readings, as well as a full menu selection. This controller is lined with a black anodized CNC machined case that is also threaded in all four corners for custom mounting. To further allow custom mounting options the keypad can also be rotated and configured horizontally! Lastly this innovative controller is powered via a Micro-USB port and cable. Mobile App - Each 3H and 3P management system works with the Free mobile app with no additional hardware required to buy and install! Not only can you adjust your ride height and system settings from your smart phone via Bluetooth, you can now update the system software directly to the manifold and controller from the mobile app as well! Manifold - The heart of every 3H and 3P system is most advanced state of the art manifold Air Lift Performance has ever created. Constructed using the best components and materials Air Lift could find, this system has also undergone rigorous torture testing to ensure this system will last for countless miles to come! Featuring a 32-bit processor that provides sophisticated height and pressure algorithms to give you the most precise control over all four corners of your vehicle. This system has also been designed to be installed as simply as possible with minimal, streamlined harness connections between the controller, manifold, and power supply. This manifold has been fully integrated from the get go with built in Bluetooth eliminating the need for additional components and wiring to connect your mobile device to the system. Air Lift Performance has also included a built in accelerometer that can detect the movement of the vehicle and make extremely accurate adjustments to ride height at anytime using the height sensors or keeping your bag pressure in line with your pre-set values. Height Sensors - Air Lift Performance has created an improved and advanced height sensor arm utilizing a angular design which will increase the sensors life span compared to straight-arm designs. The wiring harness's for these sensors also have very small connectors meaning that you do not have to drill large holes, or any holes at all in your vehicle to route them to the manifold harness! Also included are fully adjustable sensor linkages that can be measured and cut to exact lengths to properly operate in the suggested range of motion in which a template is supplied in the installation manual. This kit is also sold separately for those with the 3P Digital Air Management System that may want to upgrade to full height and pressure adjustability in the future. Show Mode - Allows you to still manage your vehicles height while the vehicle is off either through the controller or over Bluetooth with your smart phone! Kit Features: Height + Pressure 1/4" Manifold Air Lift Black Anodized Aluminum Display Fully Integrated Wiring Harness That Also Incorporates Compressor Power Necessary Fittings, Hardware, and Connectors For a Complete Install Air Lift Automatically Draining Water Trap 60ft of 1/4" Air Line 3H Includes Rotational Height Sensors, Wiring, and Linkages FREE Smart Phone App Which Works on Both iPhone and Android Integrated Into the Manifold, No Extra Module to Buy! Both Iphone and Android app are currently available * You may also integrate a second compressor to this management with ES2966731
Show More Show Less
Air Lift - Corporate Logo
T#:384246
Part#: 27703
In Stock
$ 173.99 USD
Free Shipping
$ 173.99 USD
Free Shipping
Integrate an Additional Compressor with Air Lift Performance 3H/3P Control System for your BMW. This specialized harness is designed for BMW enthusiasts who want to enhance their Air Lift Performance 3H/3P Control System by seamlessly integrating a second compressor. Elevate your BMW's air suspension capabilities to new heights with this innovative kit. Key Features: Pre-wired 50/30 Amp Relay: The harness includes a pre-wired 50/30 amp relay with a weather-tight connector, ensuring optimal electrical performance and protection. 30 Amp Fuse with Holder: A 30 amp fuse with a holder is provided to safeguard the electrical system and components, preventing any potential overloads. Solderless Wire Connectors: The kit includes solderless wire connectors, simplifying the installation process and ensuring secure electrical connections without the need for intricate soldering. Upgrade your BMW's air suspension system with this easy-to-install harness, allowing for the integration of a second compressor into your Air Lift Performance 3H/3P Control System. Experience improved performance and control with this essential addition.
Show More Show Less
Suspension Techniques - Corporate Logo
T#:376330
Part#: 65429
Ships in 4 Business Days
$ 449.00 USD
Free Shipping
$ 449.00 USD
Free Shipping
ST Sport Springs lower the center of gravity to reduce body roll in corners and limit weight transfer under acceleration. Manufactured to the highest worldwide quality standards, each spring is custom wound from high-tensile steel and rigorously tested and inspected to ensure absolute strength and reliability.
Show More Show Less

Powerflex - Corporate Logo
T#:376427
Part#: PFR5-309X4
Ships in 1 Business Day
$ 179.99 USD
Free Shipping
$ 179.99 USD
Free Shipping

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

 

Show More Show Less

Genuine BMW - Corporate Logo
T#:60709
Part#: 33521094187
Ships in 1-2 days
8% off MSRP $ 282.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 259.99 USD
Free Shipping
8% off MSRP
$ 282.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 259.99 USD
Free Shipping
Genuine BMW SHOCK ABSORBER, REAR
Genuine BMW - Corporate Logo
T#:414740
Part#: 31126758514
Ships in 1-2 days
3% off MSRP $ 377.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 365.99 USD
Free Shipping
3% off MSRP
$ 377.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 365.99 USD
Free Shipping
Genuine BMW Repair Kit, Wishbone, Right - Value Line This item fits the following BMW Chassis: E36

Genuine BMW - Corporate Logo
T#:20790
Part#: 31311095060
Ships in 8 Business Days
5% off MSRP $ 523.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 499.99 USD
Free Shipping
5% off MSRP
$ 523.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 499.99 USD
Free Shipping
Genuine BMW FRONT RIGHT SPRING STRUT 31311095060
Genuine BMW - Corporate Logo
T#:54526
Part#: 31311095059
Ships in 7 Business Days
5% off MSRP $ 523.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 499.99 USD
Free Shipping
5% off MSRP
$ 523.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 499.99 USD
Free Shipping
Genuine BMW LEFT FRONT SPRING STRUT

Mubea Front Coil Spring - Z3
For vehicles with automatic transmission only
Mubea - Corporate Logo
T#:383111
Part#: 31331092656
Ships on Oct 20, 2026
$ 103.99 USD
Free Shipping
$ 103.99 USD
Free Shipping
Replace your cracked springs

Front Shock Absorber - Right
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:5944161
Part#: 31316753258
Ships on Oct 13, 2026
$ 123.99 USD
Free Shipping
$ 123.99 USD
Free Shipping
Meyle replacement shock absorber. OE quality replacement part. Meyle-Original products are designed to meet or exceed the standards of original equipment. Comparable OE Cross References - 31311094190 31311091704
Show More Show Less
Front Shock Absorber - Left
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:5944160
Part#: 31316753257
Ships on Oct 13, 2026
$ 123.99 USD
Free Shipping
$ 123.99 USD
Free Shipping
Meyle replacement shock absorber. OE quality replacement part. Meyle-Original products are designed to meet or exceed the standards of original equipment. Comparable OE Cross References - 31311094189 31311091703
Show More Show Less
3-series Strut/Shock Mount Kit - MZ3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:340357
Part#: MZ3MOUNTKIT
Back Ordered
Sale - Save 3% $ 474.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 460.74 USD
Free Shipping
Sale - Save 3%
$ 474.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 460.74 USD
Free Shipping
This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

We sell the basic strut and shock mount package, which includes:
  • Front strut mounts (also known as guide support)
  • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
  • Front and rear self-locking mounting nuts
  • Rear Lifetime Warranty 'Repair Shop' shock mounts
  • Rear shock mount reinforcements (to prevent cracking of shock towers)
  • Rear shock mount gaskets
    In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.

    We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

    This item fits the following BMWs:
    1998-2002 Z3 BMW M Roadster M Coupe
  • Show More Show Less


    Turner Motorsport - Corporate Logo
    T#:348335
    Part#: TSU9995PB3.875KT
    Back Ordered
    $ 208.99 USD
    Free Shipping
    $ 208.99 USD
    Free Shipping
    Schwaben Ball Joint Removal Tool 20-80mm
    10X Entries Into Our F80 M3 Sweepstakes
    Schwaben - Corporate Logo
    T#:379416
    Part#: 008958SCH01A
    In Stock
    Sale - Save 25% $ 96.99

    This product was last offered at the strikethrough price on
    05-02-2026

    $ 72.74 USD
    Free Shipping
    Sale - Save 25%
    $ 96.99

    This product was last offered at the strikethrough price on
    05-02-2026

    $ 72.74 USD
    Free Shipping
    This ball joint separator has a wider jaw opening for vehicles needing a larger jaw opening. Popular on cars with thicker a-frames.
    Bav Auto Shock and Strut Nut Tool
    10X Entries Into Our F80 M3 Sweepstakes
    Bav Auto Tools - Corporate Logo
    T#:580394
    Part#: B8800081
    In Stock
    Sale - Save 5% $ 123.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 117.79 USD
    Free Shipping
    Sale - Save 5%
    $ 123.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 117.79 USD
    Free Shipping
    Used to install or remove shock and strut nuts - no more using an impact gun!

    Schwaben - Corporate Logo
    T#:557331
    Part#: 025770SCH01A
    In Stock
    Sale - Save 10% $ 210.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 189.89 USD
    Free Shipping
    Sale - Save 10%
    $ 210.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 189.89 USD
    Free Shipping
    The Schwaben control arm bushing tool kit allows you to easily remove and replace your front control arm bushings without removing the control arm from your vehicle.

    Bav Auto Trailing Arm Inner Bushing Tool - Master Set
    10X Entries Into Our F80 M3 Sweepstakes
    Be sure to add some grease to the rods in this tool set during installation to prevent breakage.
    Bav Auto Tools - Corporate Logo
    T#:580442
    Part#: B8800137
    In Stock
    Sale - Save 3% $ 293.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 285.17 USD
    Free Shipping
    Sale - Save 3%
    $ 293.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 285.17 USD
    Free Shipping
    Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.
    Show More Show Less
    Bav Auto Tools - Corporate Logo
    T#:580360
    Part#: B8800033
    Ships in 1 Business Day
    Sale - Save 10% $ 186.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 168.29 USD
    Free Shipping
    Sale - Save 10%
    $ 186.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 168.29 USD
    Free Shipping

    Removes and installs control arm bushings while leaving the control arm on the car.

    From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

    Show More Show Less

    Schwaben Wheel Mount Kit & Magnetic Caster/Camber Gauge
    10X Entries Into Our F80 M3 Sweepstakes
    Schwaben - Corporate Logo
    T#:385959
    Part#: 010891SCH01AKT
    In Stock
    Sale - Save 3% $ 403.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 392.33 USD
    Free Shipping
    Sale - Save 3%
    $ 403.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 392.33 USD
    Free Shipping
    Perform your own caster and camber adjustments with this professional kit
    CTA Tools - Corporate Logo
    T#:580736
    Part#: CTA4008
    In Stock
    $ 81.88 USD
    Free Shipping
    $ 81.88 USD
    Free Shipping
    For removal and fitting of shock absorbers without damaging the aluminum or cast iron knuckle

    Toe Alignment Gauge
    10X Entries Into Our F80 M3 Sweepstakes
    Schwaben - Corporate Logo
    T#:386443
    Part#: 99374
    Ships in 6 Business Days
    Sale - Save 3% $ 128.99

    This product was last offered at the strikethrough price on
    05-02-2026

    $ 125.12 USD
    Free Shipping
    Sale - Save 3%
    $ 128.99

    This product was last offered at the strikethrough price on
    05-02-2026

    $ 125.12 USD
    Free Shipping

    Correct toe settings contribute to both stable steering and even tire wear. The SPC Performance wheel toe bar tool is designed to prevent vehicle drifting and ensure uniform tire wear. It includes a steel bar equipped with sliding adjusters and pointers to accurately assess the vehicle's toe alignment.


    For wider wheel bases use T#386442!

    Show More Show Less

    5 Piece Strut Nut Socket Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Schwaben - Corporate Logo
    T#:377177
    Part#: 003046SCHKT
    Ships on Dec 21, 2026
    Sale - Save 23% $ 153.99

    This product was last offered at the strikethrough price on
    05-02-2026

    $ 119.21 USD
    Free Shipping
    Sale - Save 23%
    $ 153.99

    This product was last offered at the strikethrough price on
    05-02-2026

    $ 119.21 USD
    Free Shipping

    To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

    Kit Features:

    • 18mm
    • 19mm
    • 21mm
    • 22mm
    • 24mm
    Show More Show Less
    Schwaben - BMW Suspension Install Tool Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Schwaben - Corporate Logo
    T#:366822
    Part#: S45CKT
    Ships on Dec 21, 2026
    Sale - Save 22% $ 235.99

    This product was last offered at the strikethrough price on
    05-02-2026

    $ 182.95 USD
    Free Shipping
    Sale - Save 22%
    $ 235.99

    This product was last offered at the strikethrough price on
    05-02-2026

    $ 182.95 USD
    Free Shipping

    If you're refreshing your struts and springs this tool is a must, properly compress the springs, easily remove and install the strut nut, and smoothly remove the spindles.

    Features:

    • Spring Compressor
    • Strut Nut Sockets
    • Spindle Spreader
    Show More Show Less
    CTA Tools - Corporate Logo
    T#:585406
    Part#: CTA8920
    Ships on Oct 14, 2026
    $ 273.35 USD
    Free Shipping
    $ 273.35 USD
    Free Shipping
    Removes and presses in front control arm bushings without having to remove the control arm from your vehicle.


    CTA Tools - Corporate Logo
    T#:1316772
    Part#: CTA7466
    Ships on Oct 14, 2026
    $ 217.56 USD
    Free Shipping
    $ 217.56 USD
    Free Shipping
    Tightens top mount nut with proper torque while holding the strut