BMW Brakes & Brake Parts for BMW Z Series E36/7 (1996-2002)

Stainless Brake Rotor Set Screw (34211161806) - Set Of 4

10X Entries Into Our F80 M3 Sweepstakes

T#:348112

Part#: 34211161806KT

In Stock

Sale - Save 25% $ 27.99

This product was last offered at the strikethrough price on
06-13-2026

$ 20.97 USD

Add to Wish List

Qty

Sale - Save 25%

$ 27.99

This product was last offered at the strikethrough price on
06-13-2026

$ 20.97 USD

Add to Wish List

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws.

Turner Motorsport Brake Bleeder Bottle with Check Valve - Most BMWs ...

10X Entries Into Our F80 M3 Sweepstakes

T#:176959

Part#: BBMCV

In Stock

Sale - Save 10% $ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 35.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 35.99 USD

Add to Wish List

The Turner Motorsport Brake Bleeder Bottle with Check Valve is a crucial tool in maintaining your brake system's efficiency. This bottle revolutionizes brake fluid replacement through its dependable characteristics. A necessity for all automotive enthusiasts, this bottle has been engineered to optimize brake bleeding procedures. Its standout attribute is the one-way check valve. With each downward push of the pedal, the valve opens, directing used fluid into the reservoir. As the pedal rebounds, the valve securely shuts, preventing the ingress of air. This facilitates the intake of fresh fluid from the master cylinder. This bottle effortlessly facilitates the recommended bleeding sequence, simplifying the task. Its precision lies in its ability to accurately collect expelled brake fluid, thus facilitating easy monitoring. Moreover, by keeping the master cylinder reservoir consistently filled, you can conveniently replenish fluid levels as necessary. Beyond functionality, this bleeder bottle boasts a design that significantly reduces the likelihood of messy drips and spills. After bleeding each caliper, you can detach the tube from the bleed screw and conveniently 'park' it on the vent/drain port located on the cap. This thoughtful feature maintains the cleanliness of your workspace. The Turner Motorsport Brake Bleeder Bottle with Check Valve stands as an indispensable companion for brake system maintenance. Through its incorporation of the one-way check valve and its purpose-driven design, it streamlines brake fluid upkeep, guaranteeing both the safety and performance of your vehicle. Features: One-way check valve guarantees fluid evacuation with precision while preventing air intake. Effective fluid collection and real-time monitoring throughout the process. 'Park' design for the tube minimizes instances of spills and drips, preserving the tidiness of your workspace.

Show More Show Less

Turner Rear Stainless Steel Brake Lines - E3/E10/E12/E21/E23/E24/E30/...

10X Entries Into Our F80 M3 Sweepstakes

T#:582976

Part#: 022749TMS05

In Stock

Sale - Save 20% $ 88.99

This product was last offered at the strikethrough price on
06-14-2026

$ 71.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 88.99

This product was last offered at the strikethrough price on
06-14-2026

$ 71.19 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner - Front Stainless Steel Brake Lines - E36M, Z3M

10X Entries Into Our F80 M3 Sweepstakes

T#:582974

Part#: 022749TMS01

In Stock

Sale - Save 15% $ 110.99

This product was last offered at the strikethrough price on
06-14-2026

$ 94.34 USD

Add to Wish List

Qty

Sale - Save 15%

$ 110.99

This product was last offered at the strikethrough price on
06-14-2026

$ 94.34 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Front Stainless Steel Brake Lines - E36 / Z3

10X Entries Into Our F80 M3 Sweepstakes

T#:582973

Part#: 022749TMS02

In Stock

Sale - Save 15% $ 110.99

This product was last offered at the strikethrough price on
06-14-2026

$ 94.34 USD

Add to Wish List

Qty

Sale - Save 15%

$ 110.99

This product was last offered at the strikethrough price on
06-14-2026

$ 94.34 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport Stainless Steel Brake Lines - Front and Rear (No Mi...

10X Entries Into Our F80 M3 Sweepstakes

T#:583489

Part#: 022749TMS09

In Stock

Sale - Save 15% $ 199.99

This product was last offered at the strikethrough price on
06-14-2026

$ 169.98 USD

Add to Wish List

Qty

Sale - Save 15%

$ 199.99

This product was last offered at the strikethrough price on
06-14-2026

$ 169.98 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel plating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Brake Bleeder Bottle with Magnet

10X Entries Into Our F80 M3 Sweepstakes

T#:302462

Part#: BBM

In Stock

Sale - Save 5% $ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.44 USD

Add to Wish List

Qty

Sale - Save 5%

$ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.44 USD

Add to Wish List

The Brake Bleeder Bottle with Magnet is an indispensable tool for automotive enthusiasts and professionals seeking a hassle-free and efficient solution for bleeding brake systems. This innovative brake bleeder bottle offers several features that make the brake bleeding process smoother and more convenient than ever before. One of the standout features of this brake bleeder bottle is its "park" feature. This feature is designed to prevent spills and messes during the brake bleeding process. It allows you to secure the hose in a stable position, ensuring that it stays in place and doesn't accidentally tip over or spill brake fluid. This not only saves time but also helps maintain a clean and organized work environment, which is crucial when working on brake systems. The "park" feature is complemented by a magnet that is attached to the bottle. The magnet allows the bottle to easily attach to the car, nearby toolbox, or other metal services so you don't have to worry about the bottle while you bleed your brakes! This ensures that the bottle remains securely in position throughout the brake bleeding process, minimizing the risk of accidents and fluid spills. The Brake Bleeder Bottle with Magnet is not only practical but also durable. It is built to withstand the rigors of automotive maintenance and is compatible with a wide range of brake systems. Its user-friendly design makes it suitable for both beginners and experienced technicians, allowing for efficient and mess-free brake bleeding.

Show More Show Less

Turner Motorsport Extended Stainless Steel Brake Lines - Front ...

10X Entries Into Our F80 M3 Sweepstakes
Extended brake lines for use in custom suspension applications in drift or race applications

T#:584325

Part#: 022749TMS06

In Stock

Sale - Save 10% $ 103.99

This product was last offered at the strikethrough price on
06-14-2026

$ 93.59 USD

Add to Wish List

Qty

Sale - Save 10%

$ 103.99

This product was last offered at the strikethrough price on
06-14-2026

$ 93.59 USD

Add to Wish List

Need extended brake lines for your vehicle? Often vehicles with modified steering angle for drift or race applications require extended brake lines, we made sure you are covered with our extended E36 non-M brake lines. Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

Show More Show Less

Turner Motorsport Brake Bleeder Bottle

10X Entries Into Our F80 M3 Sweepstakes

T#:338572

Part#: TMS1196

Ships on Nov 2, 2026

Sale - Save 5% $ 28.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 27.54 USD

Add to Wish List

Sale - Save 5%

$ 28.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 27.54 USD

Add to Wish List

The Turner Motorsport Brake Bleeder Bottle is the perfect companion when bleeding your brakes! The bottle features a nice long flexible hose so fitment over the bleeder nipple is a snap. These bottles also offer either a magnetic mount or a cable lanyard, so you can hang the bottle or stick it to the brake rotor, this leaves your hands-free to work with your tools. It works great with our Power Brake Bleeder

Show More Show Less

Brake Bleeder Bottle with Lanyard

10X Entries Into Our F80 M3 Sweepstakes

T#:302461

Part#: BBL

Ships on Nov 2, 2026

Sale - Save 5% $ 28.99

This product was last offered at the strikethrough price on
06-13-2026

$ 27.54 USD

Add to Wish List

Qty

Sale - Save 5%

$ 28.99

This product was last offered at the strikethrough price on
06-13-2026

$ 27.54 USD

Add to Wish List

The Brake Bleeder Bottle with Lanyard is an indispensable tool for automotive enthusiasts and professionals seeking a hassle-free and efficient solution for bleeding brake systems. This innovative brake bleeder bottle offers several features that make the brake bleeding process smoother and more convenient than ever before. One of the standout features of this brake bleeder bottle is its "park" feature. This feature is designed to prevent spills and messes during the brake bleeding process. It allows you to secure the hose in a stable position, ensuring that it stays in place and doesn't accidentally tip over or spill brake fluid. This not only saves time but also helps maintain a clean and organized work environment, which is crucial when working on brake systems. The "park" feature is complemented by a metal lanyard that comes with the bottle. This metal lanyard serves as an additional means of keeping the bottle stable and in one place. You can attach the lanyard to a fixed point in your workspace, such as a vehicle frame or a nearby hook, and then secure the bottle to it. This ensures that the bottle remains securely in position throughout the brake bleeding process, minimizing the risk of accidents and fluid spills. The Brake Bleeder Bottle with Lanyard is not only practical but also durable. It is built to withstand the rigors of automotive maintenance and is compatible with a wide range of brake systems. Its user-friendly design makes it suitable for both beginners and experienced technicians, allowing for efficient and mess-free brake bleeding.

Show More Show Less

OEM Pagid Front Brake Pads - E36 M3, E34, E32, Z3M

T#:8034

Part#: 34111162535

In Stock

$ 62.99

This product was last offered at the strikethrough price on
09-15-2026

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

These OEM Pagid brake pads surpass the quality and safety standards of the European ECE-R90 directive. Their semi-metallic friction material helps to provide maximum braking performance right from the start in every driving situation. They also feature anti-noise shims for low braking noise in accordance with O.E. standards.

This item fits the following BMWs:
1995-1998 E36 BMW M3
1989-1995 E34 BMW 525i 530i 535i 540i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1998-2002 Z3 BMW M Roadster M Coupe

Show More Show Less

OEM Pagid Rear Brake Pad Set - E36 M3, MZ3

T#:62082

Part#: 34211162536

In Stock

$ 56.99

This product was last offered at the strikethrough price on
10-08-2026

$ 48.99 USD

Add to Wish List

Qty

$ 48.99 USD

Add to Wish List

These OEM brake pads come from the OEM supplier Pagid. They surpass the quality and safety standards of the European ECE-R90 directive. Their semi-metallic friction material helps to provide maximum braking performance right from the start in every driving situation. They also feature anti-noise shims for low braking noise in accordance with O.E. standards.

This item fits the following BMWs:
1995-1999 E36 BMW M3
1998-2002 Z3 BMW Z3 M Roadster M Coupe

Show More Show Less

Pagid Racing RSL29 Endurance Racing Brake Pads - Front - E36 M3, E46 ...

T#:553569

Part#: 129529

In Stock

$ 408.99 USD

Add to Wish List

Qty

$ 408.99 USD

Add to Wish List

The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years.

This is the set of FRONT pads.

This item fits the following BMWs:
1995-1998 E36 BMW M3
2001-2006 E46 BMW 330i M3
1989-1995 E34 BMW 525i 530i 535i 540i M5
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1997-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW M Roadster M Coupe

Show More Show Less

Bav Auto Brake Bleeder Catch Bottle - All BMW

10X Entries Into Our F80 M3 Sweepstakes

T#:580334

Part#: B8800002

In Stock

Sale - Save 25% $ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD

Add to Wish List

Self supporting bottle makes the job easier and keeps old fluid contained and ready for disposal.

Bav Auto Wheel Hub and Rotor Grinding Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:580437

Part#: B8800132

In Stock

Sale - Save 10% $ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 43.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 43.19 USD

Add to Wish List

Used to remove corrosion and ensure brake rotors, wheel spacers, etc sit flush on your hubs

Bav Auto Oil Extractor - 10 Liter - Inserts Into Dip Stick Tube ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580333

Part#: B8800001

Ships in 8 Business Days

Sale - Save 15% $ 175.99

This product was last offered at the strikethrough price on
09-23-2026

$ 149.59 USD

Add to Wish List

Qty

Sale - Save 15%

$ 175.99

This product was last offered at the strikethrough price on
09-23-2026

$ 149.59 USD

Add to Wish List

Change your oil without getting underneath the vehicle! This oil extractor pulls the oil out of your engine through the dip stick tube.

Pagid Racing 1204 RSL29 Compound Brake Pads

This pad set fits the following StopTech 4-piston calipers: ST40 / ST45

T#:1731

Part#: TMS1731

Ships in 3 Business Days

$ 471.99 USD

Add to Wish List

Qty

$ 471.99 USD

Add to Wish List

does not include pad wear sensors - 18.0mm pad thickness

Pagid Racing RSL29 Endurance Racing Brake Pads - Rear - E30 M3, E36, ...

T#:553546

Part#: 128529

In Stock

$ 419.99

This product was last offered at the strikethrough price on
09-17-2026

$ 336.99 USD

Add to Wish List

Qty

$ 336.99 USD

Add to Wish List

The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years.

This is the set of Rear pads.

This item fits the following BMWs:
1984-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i 540i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si

Show More Show Less

Bremmen Steering Angle Sensor - Multiple BMWs

For vehicles equipped with DSC

10X Entries Into Our F80 M3 Sweepstakes

T#:4251510

Part#: 32306793632

Ships on Dec 2, 2026

Sale - Save 10% $ 143.99

This product was last offered at the strikethrough price on
05-03-2026

$ 129.60 USD

Add to Wish List

Qty

Sale - Save 10%

$ 143.99

This product was last offered at the strikethrough price on
05-03-2026

$ 129.60 USD

Add to Wish List

The steering angle sensor communicates with the ECU to provide an accurate signal for the traction control system in your vehicle. When the sensor fails, the system receives the wrong, or in some chances, no signal. This causes traction control to fail, and a number of lights to illuminate on the cluster. Clear these lights and bring function back to your traction control system by replacing this sensor. Note: Replacement sensor will require proper coding and calibration.

Show More Show Less

Pagid Racing RSL29 Endurance Racing Brake Pads - Front - E36 Non-M, E...

T#:553541

Part#: 218029

In Stock

$ 476.99 USD

Add to Wish List

Qty

$ 476.99 USD

Add to Wish List

The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years.

This is the set of FRONT pads.

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci
1995-2003 Z3 BMW 1.9 2.3 2.5 2.8 2.5i 3.0i
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si

Show More Show Less

Bav Auto On-Vehicle Micro Brake Pipe Flaring Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580396

Part#: B8800083

Ships on Mar 12, 2027

$ 86.99 USD

Add to Wish List

Qty

$ 86.99 USD

Add to Wish List

This tool makes 4.75mm and 3/16 in double and bubble flares in confined spaces.

Parking Brake Shoe Set - E36, Z3

T#:12198

Part#: 34416761289

In Stock

$ 47.99

This product was last offered at the strikethrough price on
05-07-2026

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

These Parking Brake Shoes for E36 3 series and Z3 include the set of 4 shoes to replace both the left and right rear parking brake shoes. These are also referred to as the hand brake or emergency brake shoes.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i

Show More Show Less

Bav Auto Brake Disc Run Out and Ball Joint Wear Gauge

10X Entries Into Our F80 M3 Sweepstakes

T#:580425

Part#: B8800118

In Stock

Sale - Save 3% $ 80.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.56 USD

Add to Wish List

Qty

Sale - Save 3%

$ 80.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.56 USD

Add to Wish List

Used to measure the wear on brake discs and ball joints.

Front Brake Rotors - Pair (315x28)

T#:342949

Part#: 34112227171/2KT

In Stock

$ 224.99 USD

Add to Wish List

Qty

$ 224.99 USD

Add to Wish List

11mm Brake Bleeder Wrench

10X Entries Into Our F80 M3 Sweepstakes

T#:49787653

Part#: 000550

In Stock

Sale - Save 15% $ 27.99

This product was last offered at the strikethrough price on
09-16-2026

$ 23.79 USD

Add to Wish List

Qty

Sale - Save 15%

$ 27.99

This product was last offered at the strikethrough price on
09-16-2026

$ 23.79 USD

Add to Wish List

Bav Auto Brake Caliper Windback - 3/8"

10X Entries Into Our F80 M3 Sweepstakes

T#:580372

Part#: B8800050

In Stock

Sale - Save 15% $ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.39 USD

Add to Wish List

Qty

Sale - Save 15%

$ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.39 USD

Add to Wish List

Reversible to work clockwise and counterclockwise.

Pagid Racing RST1 Rally/Sprint/Stock Car Racing Brake Pads - Front - ...

T#:553570

Part#: 1295RST1

In Stock

$ 429.99 USD

Add to Wish List

Qty

$ 429.99 USD

Add to Wish List

Pagid's newest sprint racing pad was developed for racing cars achieving very high average speeds with short braking distances and functional aero. The RST pads feature very high friction levels for the quickest bite and highest fade resistance than any other Pagid pad. RST pads are broken into 5 levels and all have ranging bite and release characteristics. RST pads will trade low wear for torque output and faster response. These were developed based on the needs of race engineers in World Challenge, Daytona Prototype, and GTLM where functional aero meant high grip in the corners and smaller braking zones.

RST Brake Pad Types:

RST1 - Very high friction coefficient, high initial bite, progressive torque curve, very high fade resistant
RST2 - Medium high friction coefficient, good initial bite, mild progressive torque curve, good pedal feel
RST3 - High friction coefficient, good initial bite, low heat conductivity, excellent modulation and release characteristics
RST4 - Medium friction coefficient, good initial bite, mild progressive torque curve, high heat tolerance with consistent feel
RST5 - Optimum thermal management, absolutely fluid fade resistant, highly developed recovery properties, extremely high friction coefficient

This item fits the following BMWs:
1995-1998 E36 BMW M3
2001-2006 E46 BMW 330i M3
1989-1995 E34 BMW 525i 530i 535i 540i M5
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1997-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW M Roadster M Coupe

Show More Show Less

Pagid Racing RSL29 Endurance Racing Brake Pads - Front and Rear - E36...

T#:553637

Part#: 21801285RSL29KT

In Stock

$ 895.99

This product was last offered at the strikethrough price on
09-17-2026

$ 753.99 USD

Add to Wish List

Qty

$ 753.99 USD

Add to Wish List

The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years.

This kit includes Front and Rear pads.

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci
1995-2003 Z3 BMW 1.9 2.3 2.5 2.8 2.5i 3.0i
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si

Show More Show Less

Pagid Racing RSL29 Endurance Racing Brake Pads - Front and Rear - E36...

T#:553648

Part#: 12951285RSL29KT

In Stock

$ 745.99 USD

Add to Wish List

Qty

$ 745.99 USD

Add to Wish List

The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years.

This kit includes Front and Rear brake pads.

This item fits the following BMWs:
1995-1999 E36 BMW M3
1997-2003 Z3 BMW M Coupe, M Roadster
1988-1997 E34 BMW M5

Show More Show Less

OEM Pagid Parking Brake Shoe Set - E36 M3, Z3M, E28, E34, E38, Z8 ...

T#:369135

Part#: 34416761294

Back Ordered

$ 44.00

This product was last offered at the strikethrough price on
05-07-2026

$ 42.99 USD

Add to Wish List

Qty

$ 42.99 USD

Add to Wish List

These are the OEM brake pads to fit the specific BMWs listed below. BMW used several different suppliers for their brake pads and we buy direct from their distributors to get you the same pad as originally equipped but at a fraction of the cost of the local BMW dealer. OEM brands include Pagid, Textar, Jurid, Ate, and others. These are the same pads as what originally came on your car but without the expensive BMW logo.

This item fits the following BMWs:
1995-1999 E36 BMW M3
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1983-1989 E24 BMW 633csi 635csi M6
1982-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1998-2002 Z3 BMW M Roadster M Coupe
2000-2003 E52 BMW Z8 Roadster

Show More Show Less

Bav Auto 8mm x 10mm Flare Wrench

10X Entries Into Our F80 M3 Sweepstakes

T#:580417

Part#: B8800110

In Stock

Sale - Save 25% $ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5.99 USD

Add to Wish List

The perfect fit for brake unions and fittings.

Bav Auto Vacuum Brake Bleeding Adapter

10X Entries Into Our F80 M3 Sweepstakes

T#:580345

Part#: B8800016

In Stock

Sale - Save 50% $ 21.99

This product was last offered at the strikethrough price on
05-03-2026

$ 11.02 USD

Add to Wish List

Qty

Sale - Save 50%

$ 21.99

This product was last offered at the strikethrough price on
05-03-2026

$ 11.02 USD

Add to Wish List

For Use with B8800001 Oil Extractor

Front Brake Pad Wear Sensor

10X Entries Into Our F80 M3 Sweepstakes

T#:30729002

Part#: 34352227385

In Stock

Sale - Save 15% $ 9.99

This product was last offered at the strikethrough price on
09-16-2026

$ 8.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 9.99

This product was last offered at the strikethrough price on
09-16-2026

$ 8.49 USD

Add to Wish List

15mm/17mm Double-Ended Thin Wrench - Bavarian Autopsort

10X Entries Into Our F80 M3 Sweepstakes

T#:10974876

Part#: B8300004

Ships in 1-2 days

Sale - Save 3% $ 9.99

This product was last offered at the strikethrough price on
05-03-2026

$ 9.65 USD

Add to Wish List

Qty

Sale - Save 3%

$ 9.99

This product was last offered at the strikethrough price on
05-03-2026

$ 9.65 USD

Add to Wish List

This wrench will make removing or installing Girling style brake caliper mounting bolts/guide pins or sway bar end link nuts easier. For sway bar end links, this wrench fits between the ball joint and swaybar to hold the stud while the nut is removed or installed. Not applicable to all chassis, some vehicles and/or parts manufacturers require use of a hex or torx wrench to be installed in to the end of the stud. Not to be used in high torque applications. Bavarian Autosport served the needs of BMW and MINI enthusiasts from 1974-2019. In 2019, ECS Tuning acquired the Bavarian Autosport brand, committing to continuing the tradition of excellence Bav Auto is known for. Over the years, Bav developed its own brand of parts, accessories, and upgrades. A lot of these parts are engineered and built by OEMs (Original Equipment Manufacturers – companies who make original parts for BMW, MINI, and other European marques). Just as BMW and MINI do, we work with a variety of manufacturers in Europe, Asia, and North America. In many cases, we have sourced parts that are superior to Original Equipment. A lot of time and resources have been put into developing and evaluating these products, as well as the companies who produce them. We stand behind every product we sell. If any product fails to meet our standards — or our customers' expectations — we won't sell it, and we're certainly not going to put the Bavarian Autosport name on it. In fact, we're so confident in the quality of these parts that we back every Bavarian Autosport brand part with a 2-year warranty.

Show More Show Less

Bav Auto Brake Flare Wrench - 11mm x 13mm

10X Entries Into Our F80 M3 Sweepstakes

T#:580418

Part#: B8800111

In Stock

Sale - Save 20% $ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.39 USD

Add to Wish List

Qty

Sale - Save 20%

$ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.39 USD

Add to Wish List

We recommend not using an open ended wrench when changing out brake lines. Use a flare wrench instead. This one is an 11mm flare wrench on one side and a 13mm on the other side.

Front Brake Rotors - E36 318ti & Z3 1.9 286X12 (1995-1998) (pair) ...

T#:350959

Part#: 34111160673KT

Ships in 1 Business Day

$ 157.99

This product was last offered at the strikethrough price on
08-03-2026

$ 138.99 USD

Add to Wish List

Qty

$ 138.99 USD

Add to Wish List

This is a pair (2) of front brake rotors/discs (non-vented) for 1995-1998 31ti (thru 04/1998 production) and all 1996-1998 Z3 1.9 liter. This set includes one front left and one front right brake rotor, so the price shown is to buy one pair of front rotors.

These front brake discs / brake rotors fit:
1995-1998 E36 318ti (up to production date 04/1998)
1996-1998 Z3 1.9 literThis is a pair (2) of front brake rotors/discs (non-vented) for 1995-1998 31ti (thru 04/1998 production) and all 1996-1998 Z3 1.9 liter. This set includes one front left and one front right brake rotor, so the price shown is to buy one pair of front rotors.

These front brake discs / brake rotors fit:
1995-1998 E36 318ti (up to production date 04/1998)
1996-1998 Z3 1.9 liter

Show More Show Less

New Caliper, No Core No Bracket HPBS BRAKE CALIPER DISC BRAKE CALIPER...

T#:583848

Part#: 355788961

Special Order: No Guaranteed ETA

$ 101.99 USD

Add to Wish List

Qty

$ 101.99 USD

Add to Wish List

Bav Auto 12mm x 14mm Flare Wrench - Multiple BMWs

10X Entries Into Our F80 M3 Sweepstakes

T#:580419

Part#: B8800112

Special Order: No Guaranteed ETA

Sale - Save 25% $ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5.99 USD

Add to Wish List

Avoid rounding off your bleeder screws or line fittings with the proper flare wrench.

Pagid Racing RSL1 Endurance Racing Brake Pads - Front - E36 M3, E46 3...

T#:553568

Part#: 1295RSL1

Back Ordered

$ 458.99 USD

Add to Wish List

Qty

$ 458.99 USD

Add to Wish List

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
1995-1998 E36 BMW M3
2001-2006 E46 BMW 330i M3
1989-1995 E34 BMW 525i 530i 535i 540i M5
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1997-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW M Roadster M Coupe

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Brakes & Brake Parts for BMW Z3 (1996-2002)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results